--- a/drivers/net/usb/asix.c 2009-01-02 01:06:26.000000000 -0500 +++ b/drivers/net/usb/asix.c 2009-01-14 10:35:11.000000000 -0500 @@ -35,7 +35,7 @@ #include #include -#define DRIVER_VERSION "14-Jun-2006" +#define DRIVER_VERSION "8-Jan-2009" static const char driver_name [] = "asix"; /* ASIX AX8817X based USB 2.0 Ethernet Devices */ @@ -93,8 +93,8 @@ static const char driver_name [] = "asix #define AX_SWRESET_IPPD 0x40 #define AX88772_IPG0_DEFAULT 0x15 -#define AX88772_IPG1_DEFAULT 0x0c -#define AX88772_IPG2_DEFAULT 0x12 +#define AX88772_IPG1_DEFAULT 0x16 +#define AX88772_IPG2_DEFAULT 0x1A /* AX88772 & AX88178 Medium Mode Register */ #define AX_MEDIUM_PF 0x0080 @@ -136,6 +136,13 @@ static const char driver_name [] = "asix #define AX_DEFAULT_RX_CTL \ (AX_RX_CTL_SO | AX_RX_CTL_AB ) +#define AX_PHYSELECT_PSEL 0x01 +#define AX_PHYSELECT_ASEL 0x02 +#define AX_PHYSELECT_SSMII 0x04 +#define AX_PHYSELECT_SSRMII 0x08 +#define AX_PHYSELECT_SSRRMII 0x0C +#define AX_PHYSELECT_SSEN 0x10 + /* GPIO 0 .. 2 toggles */ #define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */ #define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */ @@ -891,7 +898,11 @@ static int ax88772_link_reset(struct usb if (ecmd.duplex != DUPLEX_FULL) mode &= ~AX_MEDIUM_FD; - devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode); + devdbg(dev, + "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", + ecmd.speed, + ecmd.duplex, + mode); asix_write_medium_mode(dev, mode); @@ -1018,6 +1029,121 @@ out: return ret; } +static int ax88772a_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + u16 rx_ctl; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + u32 phyid; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Power up the embedded PHY */ + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0) + goto out; + + /* Select the embedded PHY as the active PHY */ + if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, + AX_PHYSELECT_SSEN | AX_PHYSELECT_PSEL, + 0, 0, NULL)) < 0) { + dbg("Select PHY #1 failed: %d", ret); + goto out; + } + + /* Reload the EEPROM and configure the GPIO pins */ + if ((ret = asix_write_gpio(dev, + AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0) + goto out; + + /* Set embedded PHY in power down state */ + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_IPPD)) < 0) + goto out; + + msleep(10); + + /* Set embedded PHY in power up state */ + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0) + goto out; + + msleep(60); + + /* Set embedded PHY in reset state */ + if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0) + goto out; + + /* Set embedded PHY in operating state */ + if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0) + goto out; + + /* Stop RX operation */ + if ((ret = asix_write_rx_ctl(dev, 0)) < 0) + goto out; + + /* Get the MAC address */ + if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, + 0, 0, ETH_ALEN, buf)) < 0) { + dbg("Failed to read MAC address: %d", ret); + goto out; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->net->do_ioctl = asix_ioctl; + dev->mii.phy_id = asix_get_phy_addr(dev); + + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + dev->net->set_multicast_list = asix_set_multicast; + dev->net->ethtool_ops = &ax88772_ethtool_ops; + + asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0) + goto out; + + if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, + AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, + AX88772_IPG2_DEFAULT, 0, NULL)) < 0) { + dbg("Write IPG,IPG1,IPG2 failed: %d", ret); + goto out; + } + + msleep(1); + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0) + goto out; + + rx_ctl = asix_read_rx_ctl(dev); + dbg("RX_CTL is 0x%04x after all initializations", rx_ctl); + + rx_ctl = asix_read_medium_status(dev); + dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ + if (dev->driver_info->flags & FLAG_FRAMING_AX) { + /* hard_mtu is still the default - the device does not support + jumbo eth frames */ + dev->rx_urb_size = 2048; + } + return 0; + +out: + return ret; +} + static struct ethtool_ops ax88178_ethtool_ops = { .get_drvinfo = asix_get_drvinfo, .get_link = asix_get_link, @@ -1339,6 +1465,17 @@ static const struct driver_info ax88772_ .tx_fixup = asix_tx_fixup, }; +static const struct driver_info ax88772a_info = { + .description = "ASIX AX88772A USB 2.0 Ethernet", + .bind = ax88772a_bind, + .status = asix_status, + .link_reset = ax88772_link_reset, + .reset = ax88772_link_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = asix_rx_fixup, + .tx_fixup = asix_tx_fixup, +}; + static const struct driver_info ax88178_info = { .description = "ASIX AX88178 USB 2.0 Ethernet", .bind = ax88178_bind, @@ -1451,6 +1588,10 @@ static const struct usb_device_id produc // Cables-to-Go USB Ethernet Adapter USB_DEVICE(0x0b95, 0x772a), .driver_info = (unsigned long) &ax88772_info, +}, { + // ASIX AX88772A + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772a_info, }, { }, // END };