| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1232011431.6810.34.camel@localhost>
Date: Thu, 15 Jan 2009 17:23:51 +0800
From: "stanley.miao" <stanley.miao@...driver.com>
To: Steve Glendinning <steve.glendinning@...c.com>
Cc: linux-arm-kernel@...ts.arm.linux.org.uk, netdev@...r.kernel.org,
David Miller <davem@...emloft.net>,
Russell King <linux@....linux.org.uk>,
Ian Saturley <ian.saturley@...c.com>
Subject: Re: [PATCH 5/5] arm: convert omap ldp platform to use smsc911x
This patch should be sent to linux-omap mail list. But linux-omap git
tree is still in 2.6.28 and it doesn't have smsc911x driver.
Stanley.
On Thu, 2009-01-15 at 09:08 +0000, Steve Glendinning wrote:
> Signed-off-by: Steve Glendinning <steve.glendinning@...c.com>
> ---
> arch/arm/configs/omap_ldp_defconfig | 24 ++++++++++++++-
> arch/arm/mach-omap2/board-ldp.c | 41 +++++++++++++++++----------
> arch/arm/plat-omap/include/mach/board-ldp.h | 4 +-
> 3 files changed, 50 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
> index b77d054..c164ff2 100644
> --- a/arch/arm/configs/omap_ldp_defconfig
> +++ b/arch/arm/configs/omap_ldp_defconfig
> @@ -474,14 +474,34 @@ CONFIG_NETDEVICES=y
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_VETH is not set
> -# CONFIG_PHYLIB is not set
> +CONFIG_PHYLIB=y
> +
> +#
> +# MII PHY device drivers
> +#
> +# CONFIG_MARVELL_PHY is not set
> +# CONFIG_DAVICOM_PHY is not set
> +# CONFIG_QSEMI_PHY is not set
> +# CONFIG_LXT_PHY is not set
> +# CONFIG_CICADA_PHY is not set
> +# CONFIG_VITESSE_PHY is not set
> +CONFIG_SMSC_PHY=y
> +# CONFIG_BROADCOM_PHY is not set
> +# CONFIG_ICPLUS_PHY is not set
> +# CONFIG_REALTEK_PHY is not set
> +# CONFIG_NATIONAL_PHY is not set
> +# CONFIG_STE10XP is not set
> +# CONFIG_LSI_ET1011C_PHY is not set
> +# CONFIG_FIXED_PHY is not set
> +# CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_AX88796 is not set
> # CONFIG_SMC91X is not set
> # CONFIG_DM9000 is not set
> # CONFIG_ENC28J60 is not set
> -CONFIG_SMC911X=y
> +# CONFIG_SMC911X is not set
> +CONFIG_SMSC911X=y
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index aa69727..b8810bd 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -22,6 +22,7 @@
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> #include <linux/i2c/twl4030.h>
> +#include <linux/smsc911x.h>
>
> #include <mach/hardware.h>
> #include <asm/mach-types.h>
> @@ -43,7 +44,7 @@
>
> #define SDP3430_SMC91X_CS 3
>
> -static struct resource ldp_smc911x_resources[] = {
> +static struct resource ldp_smsc911x_resources[] = {
> [0] = {
> .start = OMAP34XX_ETHR_START,
> .end = OMAP34XX_ETHR_START + SZ_4K,
> @@ -56,40 +57,50 @@ static struct resource ldp_smc911x_resources[] = {
> },
> };
>
> -static struct platform_device ldp_smc911x_device = {
> - .name = "smc911x",
> +static struct smsc911x_platform_config ldp_smsc911x_config = {
> + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
> + .flags = SMSC911X_USE_32BIT,
> + .phy_interface = PHY_INTERFACE_MODE_MII,
> +};
> +
> +static struct platform_device ldp_smsc911x_device = {
> + .name = "smsc911x",
> .id = -1,
> - .num_resources = ARRAY_SIZE(ldp_smc911x_resources),
> - .resource = ldp_smc911x_resources,
> + .num_resources = ARRAY_SIZE(ldp_smsc911x_resources),
> + .resource = ldp_smsc911x_resources,
> + .dev = {
> + .platform_data = &ldp_smsc911x_config,
> + },
> };
>
> static struct platform_device *ldp_devices[] __initdata = {
> - &ldp_smc911x_device,
> + &ldp_smsc911x_device,
> };
>
> -static inline void __init ldp_init_smc911x(void)
> +static inline void __init ldp_init_smsc911x(void)
> {
> int eth_cs;
> unsigned long cs_mem_base;
> int eth_gpio = 0;
>
> - eth_cs = LDP_SMC911X_CS;
> + eth_cs = LDP_SMSC911X_CS;
>
> if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
> - printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
> + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
> return;
> }
>
> - ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
> - ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
> + ldp_smsc911x_resources[0].start = cs_mem_base + 0x0;
> + ldp_smsc911x_resources[0].end = cs_mem_base + 0xf;
> udelay(100);
>
> - eth_gpio = LDP_SMC911X_GPIO;
> + eth_gpio = LDP_SMSC911X_GPIO;
>
> - ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
> + ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
>
> if (omap_request_gpio(eth_gpio) < 0) {
> - printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
> + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
> eth_gpio);
> return;
> }
> @@ -101,7 +112,7 @@ static void __init omap_ldp_init_irq(void)
> omap2_init_common_hw();
> omap_init_irq();
> omap_gpio_init();
> - ldp_init_smc911x();
> + ldp_init_smsc911x();
> }
>
> static struct omap_uart_config ldp_uart_config __initdata = {
> diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
> index f233996..74e98eb 100644
> --- a/arch/arm/plat-omap/include/mach/board-ldp.h
> +++ b/arch/arm/plat-omap/include/mach/board-ldp.h
> @@ -32,8 +32,8 @@
> extern void twl4030_bci_battery_init(void);
>
> #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
> -#define LDP_SMC911X_CS 1
> -#define LDP_SMC911X_GPIO 152
> +#define LDP_SMSC911X_CS 1
> +#define LDP_SMSC911X_GPIO 152
> #define DEBUG_BASE 0x08000000
> #define OMAP34XX_ETHR_START DEBUG_BASE
> #endif /* __ASM_ARCH_OMAP_LDP_H */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists