[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1233075077-17205-4-git-send-email-steve.glendinning@smsc.com>
Date: Tue, 27 Jan 2009 16:51:11 +0000
From: Steve Glendinning <steve.glendinning@...c.com>
To: linux-arm-kernel@...ts.arm.linux.org.uk, netdev@...r.kernel.org
Cc: David Miller <davem@...emloft.net>,
Russell King <linux@....linux.org.uk>,
Stanley Miao <stanley.miao@...driver.com>,
Ian Saturley <ian.saturley@...c.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Catalin Marinas <catalin.marinas@....com>,
Steve Glendinning <steve.glendinning@...c.com>
Subject: [PATCH 03/10] smsc911x: add external phy detection overrides
On LAN9115/LAN9117/LAN9215/LAN9217, external phys are supported. These
are usually indicated by a hardware strap which sets an "external PHY
detected" bit in the HW_CFG register.
In some cases it is desirable to override this hardware strap and force
use of either the internal phy or an external PHY. This patch adds
SMSC911X_FORCE_INTERNAL_PHY and SMSC911X_FORCE_EXTERNAL_PHY flags so a
platform can indicate this preference via its platform_data.
Signed-off-by: Steve Glendinning <steve.glendinning@...c.com>
Acked-by: Sascha Hauer <s.hauer@...gutronix.de>
Tested-by: Sascha Hauer <s.hauer@...gutronix.de>
---
drivers/net/smsc911x.c | 75 +++++++++++++++++++++++----------------------
include/linux/smsc911x.h | 2 +
2 files changed, 40 insertions(+), 37 deletions(-)
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index f882fd5..c7379f5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -368,48 +368,53 @@ out:
return reg;
}
-/* Autodetects and initialises external phy for SMSC9115 and SMSC9117 flavors.
- * If something goes wrong, returns -ENODEV to revert back to internal phy.
- * Performed at initialisation only, so interrupts are enabled */
-static int smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
+/* Switch to external phy. Assumes tx and rx are stopped. */
+static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)
{
unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
- /* External phy is requested, supported, and detected */
- if (hwcfg & HW_CFG_EXT_PHY_DET_) {
+ /* Disable phy clocks to the MAC */
+ hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
+ hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
+ smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+ udelay(10); /* Enough time for clocks to stop */
- /* Switch to external phy. Assuming tx and rx are stopped
- * because smsc911x_phy_initialise is called before
- * smsc911x_rx_initialise and tx_initialise. */
+ /* Switch to external phy */
+ hwcfg |= HW_CFG_EXT_PHY_EN_;
+ smsc911x_reg_write(pdata, HW_CFG, hwcfg);
- /* Disable phy clocks to the MAC */
- hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
- hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
- smsc911x_reg_write(pdata, HW_CFG, hwcfg);
- udelay(10); /* Enough time for clocks to stop */
+ /* Enable phy clocks to the MAC */
+ hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
+ hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
+ smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+ udelay(10); /* Enough time for clocks to restart */
- /* Switch to external phy */
- hwcfg |= HW_CFG_EXT_PHY_EN_;
- smsc911x_reg_write(pdata, HW_CFG, hwcfg);
-
- /* Enable phy clocks to the MAC */
- hwcfg &= (~HW_CFG_PHY_CLK_SEL_);
- hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_;
- smsc911x_reg_write(pdata, HW_CFG, hwcfg);
- udelay(10); /* Enough time for clocks to restart */
+ hwcfg |= HW_CFG_SMI_SEL_;
+ smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+}
- hwcfg |= HW_CFG_SMI_SEL_;
- smsc911x_reg_write(pdata, HW_CFG, hwcfg);
+/* Autodetects and enables external phy if present on supported chips.
+ * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
+ * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
+static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
+{
+ unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
- SMSC_TRACE(HW, "Successfully switched to external PHY");
+ if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
+ SMSC_TRACE(HW, "Forcing internal PHY");
+ pdata->using_extphy = 0;
+ } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
+ SMSC_TRACE(HW, "Forcing external PHY");
+ smsc911x_phy_enable_external(pdata);
+ pdata->using_extphy = 1;
+ } else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
+ SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY");
+ smsc911x_phy_enable_external(pdata);
pdata->using_extphy = 1;
} else {
- SMSC_WARNING(HW, "No external PHY detected, "
- "Using internal PHY instead.");
- /* Use internal phy */
- return -ENODEV;
+ SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY");
+ pdata->using_extphy = 0;
}
- return 0;
}
/* Fetches a tx status out of the status fifo */
@@ -824,22 +829,18 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
pdata->mii_bus->parent = &pdev->dev;
- pdata->using_extphy = 0;
-
switch (pdata->idrev & 0xFFFF0000) {
case 0x01170000:
case 0x01150000:
case 0x117A0000:
case 0x115A0000:
/* External PHY supported, try to autodetect */
- if (smsc911x_phy_initialise_external(pdata) < 0) {
- SMSC_TRACE(HW, "No external PHY detected, "
- "using internal PHY");
- }
+ smsc911x_phy_initialise_external(pdata);
break;
default:
SMSC_TRACE(HW, "External PHY is not supported, "
"using internal PHY");
+ pdata->using_extphy = 0;
break;
}
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 1cbf031..170c76b 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -43,5 +43,7 @@ struct smsc911x_platform_config {
/* Constants for flags */
#define SMSC911X_USE_16BIT (BIT(0))
#define SMSC911X_USE_32BIT (BIT(1))
+#define SMSC911X_FORCE_INTERNAL_PHY (BIT(2))
+#define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3))
#endif /* __LINUX_SMSC911X_H__ */
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists