[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1233219791-18691-9-git-send-email-s.hauer@pengutronix.de>
Date: Thu, 29 Jan 2009 10:03:10 +0100
From: Sascha Hauer <s.hauer@...gutronix.de>
To: netdev@...r.kernel.org
Cc: David Miller <davem@...emloft.net>,
Greg Ungerer <gerg@...pgear.com>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH] fec: Add support for Freescale MX27
Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
Acked-by: Greg Ungerer <gerg@...inux.org>
---
drivers/net/Kconfig | 6 +++---
drivers/net/fec.c | 15 +++++++++++++--
drivers/net/fec.h | 11 +++++++++--
3 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9fe8cb7..2d7cd61 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1828,11 +1828,11 @@ config 68360_ENET
the Motorola 68360 processor.
config FEC
- bool "FEC ethernet controller (of ColdFire CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x
+ bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+ depends on M523x || M527x || M5272 || M528x || M520x || MACH_MX27
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
- controller on some Motorola ColdFire processors.
+ controller on some Motorola ColdFire and Freescale i.MX processors.
config FEC2
bool "Second FEC ethernet controller (on some ColdFire CPUs)"
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index a17dc6a..7631062 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -38,10 +38,14 @@
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <asm/cacheflush.h>
+
+#ifndef CONFIG_ARCH_MXC
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
+#endif
#include "fec.h"
@@ -51,6 +55,13 @@
#define FEC_MAX_PORTS 1
#endif
+#ifdef CONFIG_ARCH_MXC
+#include <mach/hardware.h>
+#define FEC_ALIGNMENT 0xf
+#else
+#define FEC_ALIGNMENT 0x3
+#endif
+
#if defined(CONFIG_M5272)
#define HAVE_mii_link_interrupt
#endif
@@ -158,7 +169,7 @@ typedef struct {
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
@@ -339,7 +350,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
- if (bdp->cbd_bufaddr & 0x3) {
+ if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
unsigned int index;
index = bdp - fep->tx_bd_base;
memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 292719d..76c64c9 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -14,7 +14,7 @@
/****************************************************************************/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
@@ -103,12 +103,19 @@ typedef struct fec {
/*
* Define the buffer descriptor structure.
*/
+#ifdef CONFIG_ARCH_MXC
+typedef struct bufdesc {
+ unsigned short cbd_datlen; /* Data length */
+ unsigned short cbd_sc; /* Control and status info */
+ unsigned long cbd_bufaddr; /* Buffer address */
+} cbd_t;
+#else
typedef struct bufdesc {
unsigned short cbd_sc; /* Control and status info */
unsigned short cbd_datlen; /* Data length */
unsigned long cbd_bufaddr; /* Buffer address */
} cbd_t;
-
+#endif
/*
* The following definitions courtesy of commproc.h, which where
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists