[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1233256358.3656.9.camel@achroite>
Date: Thu, 29 Jan 2009 19:12:38 +0000
From: Ben Hutchings <bhutchings@...arflare.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH 00/20] sfc: Fixes and new PHY support for 2.6.29
Please take the following changes for 2.6.29.
The changes are made up of:
- Bug fixes based on internal QA for version 2.3
- Addition of one new PHY and board
- A small feature addition for the SFT9001 (which is itself new for .29)
Ben.
Ben Hutchings (14):
sfc: SFT9001: Include non-breaking cable diagnostics in online
self-tests
sfc: Fix test for MDIO read failure
sfc: SFT9001/SFN4111T: Check PHY boot status during board
initialisation
sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1
sfc: Update board info for hardware monitor on SFN4111T-R5 and later
sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B
sfc: SFX7101/SFT9001: Fix AN advertisements
sfc: Remove "XFP" from log messages that are not specific to XFP
sfc: Fix reporting of PHY id
sfc: Add support for QT2025C PHY
sfc: Delete unused efx_blinker::led_num field
sfc: Clean up LED control
sfc: Add support for SFN4112F SFP+ reference design
sfc: Replace stats_enabled flag with a disable count
Steve Hodgson (6):
sfc: SFT9001: Enable robust link training
sfc: SFX7101: Remove workaround for bad link training
sfc: SFT9001: Fix speed reporting in 1G PHY loopback
sfc: Fix post-reset MAC selection
sfc: Reinitialise the PHY completely in case of a PHY or NIC reset
sfc: Test for PHYXS faults whenever we cannot test link state bits
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists