Add a configurable Descriptor Skip Length for systems that lack cache coherence.

Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com>
---
The testing is done on kernel version 2.6.18.

--- drivers/net/tulip/Kconfig.org	2006-09-20 06:42:06.000000000 +0300
+++ drivers/net/tulip/Kconfig	2009-02-07 20:48:17.000000000 +0200
@@ -27,6 +27,18 @@ config DE2104X
 	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
 
+config DE2104X_DSL
+	int "Descriptor Skip Length in 32 bit longwords"
+	depends on DE2104X
+	range 0 31
+	default 0
+	help
+	  Setting this value allows to align ring buffer descriptors into their
+	  own cache lines. Value of 4 corresponds to the typical 32 byte line
+	  (the descriptor is 16 bytes). This is necessary on systems that lack
+	  cache coherence, an example is PowerMac 5500. Otherwise 0 is safe.
+	  Default is 0, and range is 0 to 31.
+
 config TULIP
 	tristate "DECchip Tulip (dc2114x) PCI support"
 	depends on PCI
--- drivers/net/tulip/de2104x.c.org	2006-09-20 06:42:06.000000000 +0300
+++ drivers/net/tulip/de2104x.c	2009-02-07 15:04:04.000000000 +0200
@@ -82,6 +82,13 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x
 				 NETIF_MSG_RX_ERR	| \
 				 NETIF_MSG_TX_ERR)
 
+/* Descriptor skip length in 32 bit longwords. */
+#ifndef CONFIG_DE2104X_DSL
+#define DSL			0
+#else
+#define DSL			CONFIG_DE2104X_DSL
+#endif
+
 #define DE_RX_RING_SIZE		64
 #define DE_TX_RING_SIZE		64
 #define DE_RING_BYTES		\
@@ -153,6 +160,7 @@ enum {
 	CmdReset		= (1 << 0),
 	CacheAlign16		= 0x00008000,
 	BurstLen4		= 0x00000400,
+	DescSkipLen		= (DSL << 2),
 
 	/* Rx/TxPoll bits */
 	NormalTxPoll		= (1 << 0),
@@ -246,7 +254,7 @@ static const u32 de_intr_mask =
  * Set the programmable burst length to 4 longwords for all:
  * DMA errors result without these values. Cache align 16 long.
  */
-static const u32 de_bus_mode = CacheAlign16 | BurstLen4;
+static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen;
 
 struct de_srom_media_block {
 	u8			opts;
@@ -266,6 +274,9 @@ struct de_desc {
 	__le32			opts2;
 	__le32			addr1;
 	__le32			addr2;
+#if DSL
+	__le32			skip[DSL];
+#endif
 };
 
 struct media_info {