| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090211191212.GA7033@tuxdriver.com>
Date: Wed, 11 Feb 2009 14:12:12 -0500
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-next@...r.kernel.org
Subject: pull request: wireless-2.6 2009-02-11
Dave,
Here are a few more intended for 2.6.29. The ath5k one is already in
-next, but it turns-out to affect 2.6.29 as well. The two zd1211rw ones
are one-liners that enable new hardware for that driver.
The iwlwifi patch corrects a problem (introduced by the previous iwlwifi
fix) that disables the iwlwifi devices after suspend/resume. It will
conflict with what is already in -next -- just take the hunks that are
already in -next and ignore the hunks introduced here.
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/
---
The following changes since commit 7b7a799d664a46eec6cb7de200c90f40730497a7:
Meelis Roos (1):
sunhme: Fix Quattro HME irq registration on proble failures
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master
Bob Copeland (1):
ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rx
Hin-Tak Leung (2):
zd1211rw: adding 0ace:0xa211 as a ZD1211 device
zd1211rw: treat MAXIM_NEW_RF(0x08) as UW2453_RF(0x09) for TP-Link WN322/422G
Johannes Berg (1):
mac80211: restrict to AP in outgoing interface heuristic
Reinette Chatre (1):
iwlwifi: fix suspend/resume and its usage of pci saved state
drivers/net/wireless/ath5k/base.c | 85 +++++++++++++++++----------
drivers/net/wireless/iwlwifi/iwl-agn.c | 15 ++++-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 15 ++++-
drivers/net/wireless/zd1211rw/zd_rf.c | 1 +
drivers/net/wireless/zd1211rw/zd_usb.c | 1 +
net/mac80211/tx.c | 2 +
6 files changed, 83 insertions(+), 36 deletions(-)
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index a533ed6..1d77ee9 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1098,6 +1098,42 @@ ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
* Buffers setup *
\***************/
+static
+struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
+{
+ struct sk_buff *skb;
+ unsigned int off;
+
+ /*
+ * Allocate buffer with headroom_needed space for the
+ * fake physical layer header at the start.
+ */
+ skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
+
+ if (!skb) {
+ ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
+ sc->rxbufsize + sc->cachelsz - 1);
+ return NULL;
+ }
+ /*
+ * Cache-line-align. This is important (for the
+ * 5210 at least) as not doing so causes bogus data
+ * in rx'd frames.
+ */
+ off = ((unsigned long)skb->data) % sc->cachelsz;
+ if (off != 0)
+ skb_reserve(skb, sc->cachelsz - off);
+
+ *skb_addr = pci_map_single(sc->pdev,
+ skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
+ if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+ ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ return skb;
+}
+
static int
ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
{
@@ -1105,37 +1141,11 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
struct sk_buff *skb = bf->skb;
struct ath5k_desc *ds;
- if (likely(skb == NULL)) {
- unsigned int off;
-
- /*
- * Allocate buffer with headroom_needed space for the
- * fake physical layer header at the start.
- */
- skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
- if (unlikely(skb == NULL)) {
- ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
- sc->rxbufsize + sc->cachelsz - 1);
+ if (!skb) {
+ skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
+ if (!skb)
return -ENOMEM;
- }
- /*
- * Cache-line-align. This is important (for the
- * 5210 at least) as not doing so causes bogus data
- * in rx'd frames.
- */
- off = ((unsigned long)skb->data) % sc->cachelsz;
- if (off != 0)
- skb_reserve(skb, sc->cachelsz - off);
-
bf->skb = skb;
- bf->skbaddr = pci_map_single(sc->pdev,
- skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
- if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
- ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
- dev_kfree_skb(skb);
- bf->skb = NULL;
- return -ENOMEM;
- }
}
/*
@@ -1664,7 +1674,8 @@ ath5k_tasklet_rx(unsigned long data)
{
struct ieee80211_rx_status rxs = {};
struct ath5k_rx_status rs = {};
- struct sk_buff *skb;
+ struct sk_buff *skb, *next_skb;
+ dma_addr_t next_skb_addr;
struct ath5k_softc *sc = (void *)data;
struct ath5k_buf *bf, *bf_last;
struct ath5k_desc *ds;
@@ -1749,10 +1760,17 @@ ath5k_tasklet_rx(unsigned long data)
goto next;
}
accept:
+ next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
+
+ /*
+ * If we can't replace bf->skb with a new skb under memory
+ * pressure, just skip this packet
+ */
+ if (!next_skb)
+ goto next;
+
pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
PCI_DMA_FROMDEVICE);
- bf->skb = NULL;
-
skb_put(skb, rs.rs_datalen);
/* The MAC header is padded to have 32-bit boundary if the
@@ -1825,6 +1843,9 @@ accept:
ath5k_check_ibss_tsf(sc, skb, &rxs);
__ieee80211_rx(sc->hw, skb, &rxs);
+
+ bf->skb = next_skb;
+ bf->skbaddr = next_skb_addr;
next:
list_move_tail(&bf->list, &sc->rxbuf);
} while (ath5k_rxbuf_setup(sc, bf) == 0);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c01ea48..36bafeb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -4042,7 +4042,19 @@ static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
priv->is_open = 1;
}
- pci_save_state(pdev);
+ /* pci driver assumes state will be saved in this function.
+ * pci state is saved and device disabled when interface is
+ * stopped, so at this time pci device will always be disabled -
+ * whether interface was started or not. saving pci state now will
+ * cause saved state be that of a disabled device, which will cause
+ * problems during resume in that we will end up with a disabled device.
+ *
+ * indicate that the current saved state (from when interface was
+ * stopped) is valid. if interface was never up at time of suspend
+ * then the saved state will still be valid as it was saved during
+ * .probe. */
+ pdev->state_saved = true;
+
pci_set_power_state(pdev, PCI_D3hot);
return 0;
@@ -4053,7 +4065,6 @@ static int iwl_pci_resume(struct pci_dev *pdev)
struct iwl_priv *priv = pci_get_drvdata(pdev);
pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
if (priv->is_open)
iwl_mac_start(priv->hw);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 5b44d32..93be74a 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -8143,7 +8143,19 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
priv->is_open = 1;
}
- pci_save_state(pdev);
+ /* pci driver assumes state will be saved in this function.
+ * pci state is saved and device disabled when interface is
+ * stopped, so at this time pci device will always be disabled -
+ * whether interface was started or not. saving pci state now will
+ * cause saved state be that of a disabled device, which will cause
+ * problems during resume in that we will end up with a disabled device.
+ *
+ * indicate that the current saved state (from when interface was
+ * stopped) is valid. if interface was never up at time of suspend
+ * then the saved state will still be valid as it was saved during
+ * .probe. */
+ pdev->state_saved = true;
+
pci_set_power_state(pdev, PCI_D3hot);
return 0;
@@ -8154,7 +8166,6 @@ static int iwl3945_pci_resume(struct pci_dev *pdev)
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
if (priv->is_open)
iwl3945_mac_start(priv->hw);
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c
index 7207bfd..c875ee0 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf.c
@@ -86,6 +86,7 @@ int zd_rf_init_hw(struct zd_rf *rf, u8 type)
case AL7230B_RF:
r = zd_rf_init_al7230b(rf);
break;
+ case MAXIM_NEW_RF:
case UW2453_RF:
r = zd_rf_init_uw2453(rf);
break;
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 17527f7..f0e5e94 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -37,6 +37,7 @@
static struct usb_device_id usb_ids[] = {
/* ZD1211 */
{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4278e54..94de503 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1343,6 +1343,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
list) {
if (!netif_running(sdata->dev))
continue;
+ if (sdata->vif.type != NL80211_IFTYPE_AP)
+ continue;
if (compare_ether_addr(sdata->dev->dev_addr,
hdr->addr2)) {
dev_hold(sdata->dev);
--
John W. Linville Someday the world will need a hero, and you
linville@...driver.com might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists