[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <49B10715.3050900@pobox.com>
Date: Fri, 06 Mar 2009 06:20:53 -0500
From: Jeff Garzik <jgarzik@...ox.com>
To: Ben Hutchings <bhutchings@...arflare.com>
CC: Rick Jones <rick.jones2@...com>, netdev@...r.kernel.org
Subject: Re: [PATCH] ethtool: Support arbitrary speeds
Ben Hutchings wrote:
> The speed and speed_hi fields of struct ethtool_cmd together represent
> a value in units of Mbit/s. The valid speed settings are hardware-
> dependent and should be checked by the driver. Remove our validation
> and allow arbitrary positive values. Continue to report 0 and -1 as
> "Unknown!" since some drivers will report these invalid values when
> the link is down.
>
> Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
> ---
> On Thu, 2009-01-08 at 11:50 -0800, Rick Jones wrote:
>>> I think 0, (u32)(-1) and (u16)(-1) may have to be special-cased as
>>> unknown, but everything else can be treated as a number of Mbit/s. I
>>> don't know what a driver should do about an interface that really runs
>>> at 65.535 Gbit/s though...
>> Something along these lines then? (assuming my mailer doesn't fubar this
>> :( - I normally send matches via mailx)
>
> That's kind of incomplete. Here's my attempt.
>
> In a quick test I found that the tg3 driver *doesn't* validate the speed
> setting if autonegotiation is off, and will accept and report back e.g.
> 99. But this patch doesn't create a new problem as you could already
> set it to the unsupported speeds of 2500 and 10000.
>
> Ben.
>
> ethtool.8 | 4 ++--
> ethtool.c | 42 ++++++++++--------------------------------
> 2 files changed, 12 insertions(+), 34 deletions(-)
ACK, can you rediff against current git repo?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists