[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1236441225.14145.7.camel@localhost.localdomain>
Date: Sat, 07 Mar 2009 16:53:45 +0100
From: Jesper Dangaard Brouer <jdb@...x.dk>
To: Gary Thomas <gary@...assoc.com>
Cc: Jesper Dangaard Brouer <hawk@...u.dk>,
Lennert Buytenhek <buytenh@...tstofly.org>,
netdev <netdev@...r.kernel.org>
Subject: Re: Marvell 88E609x switch?
On Fri, 2009-03-06 at 08:49 -0700, Gary Thomas wrote:
> After much experimentation, I finally found out what was
> wrong. Basically, the trunk masks have 8 bits on the 6131,
> but 11 bits on the 609x and this wasn't being handled. Once
> the trunk masks were reset by the init code, there was no
> path to the CPU port from the LAN ports :-( The attached
> patch is what I've ended up with. It works, at least for
> a single switch.
Thats great! ... finally you discovered the difference :-)
Once you are ready with a more final patch, I'll be happy to review it
(and fixup any whitespace compliance stuff... which the attached patch
does not comply to ;-))
> Next, I need to get it to work with multiple switches (separate
> ethernet controllers, same/shared MII bus), as well as a cascaded
> switch.
Okay, I'll be happy to review any patches, but I don't have any
experience with a multiple switch chip setup...
--
Med venlig hilsen / Best regards
Jesper Brouer
ComX Networks A/S
Linux Network developer
Cand. Scient Datalog / MSc.
Author of http://adsl-optimizer.dk
LinkedIn: http://www.linkedin.com/in/brouer
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists