[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20090316231423.GA3633@tuxdriver.com>
Date: Mon, 16 Mar 2009 19:14:24 -0400
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, sfr@...b.auug.org.au
Subject: pull request: wireless-2.6 2009-03-16
Dave,
Here is a group of patches intended for 2.6.29. The one from me is
minor, but it cuts-down on log SPAM for ipw2100, ipw2200, and hostap
users. The two from Jouni fix some panics he observed himself.
The first one from Luis fixes bug 12110 at bugzilla.kernel.org. I know
he has worked on it for a long time and I've had several desperate users
asking for it, so it must be good. :-) Unfortunately, it causes some
nasty merge errors with what is in net-next-2.6 and wireless-next-2.6.
I created a merge-test branch in wireless-next-2.6, and the merge commit
log goes into more detail about resolving the issue. In short, you
probably want to diff drivers/net/ath9k against the merge-test branch...
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/
---
The following changes since commit ea8dbdd17099a9a5864ebd4c87e01e657b19c7ab:
françois romieu (1):
r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master
John W. Linville (1):
lib80211: silence excessive crypto debugging messages
Jouni Malinen (2):
mac80211: Fix panic on fragmentation with power saving
zd1211rw: Do not panic on device eject when associated
Luis R. Rodriguez (2):
ath9k: implement IO serialization
ath9k: AR9280 PCI devices must serialize IO as well
drivers/net/wireless/ath9k/ath9k.h | 4 +-
drivers/net/wireless/ath9k/core.h | 33 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath9k/hw.c | 22 ++++++++++++++++++++-
drivers/net/wireless/ath9k/main.c | 1 +
drivers/net/wireless/zd1211rw/zd_mac.c | 8 +++++-
net/mac80211/tx.c | 2 +
net/wireless/Kconfig | 10 +++++++++
net/wireless/lib80211_crypt_ccmp.c | 2 +
net/wireless/lib80211_crypt_tkip.c | 4 +++
9 files changed, 81 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index d278135..6650f60 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -587,8 +587,8 @@ struct ath9k_country_entry {
u8 iso[3];
};
-#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
-#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4ca2aed..139566c 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -701,6 +701,7 @@ struct ath_softc {
struct ath_hal *sc_ah;
void __iomem *mem;
spinlock_t sc_resetlock;
+ spinlock_t sc_serial_rw;
struct mutex mutex;
u8 sc_curbssid[ETH_ALEN];
@@ -751,4 +752,36 @@ int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+{
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+{
+ u32 val;
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ return val;
+}
+
#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 34474ed..c38a00b 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -437,6 +437,25 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah)
}
ah->ah_config.intr_mitigation = 1;
+
+ /*
+ * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+ * This means we use it for all AR5416 devices, and the few
+ * minor PCI AR9280 devices out there.
+ *
+ * Serialization is required because these devices do not handle
+ * well the case of two concurrent reads/writes due to the latency
+ * involved. During one read/write another read/write can be issued
+ * on another CPU while the previous read/write may still be working
+ * on our hardware, if we hit this case the hardware poops in a loop.
+ * We prevent this by serializing reads and writes.
+ *
+ * This issue is not present on PCI-Express devices or pre-AR5416
+ * devices (legacy, 802.11abg).
+ */
+ if (num_possible_cpus() > 1)
+ ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
}
static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
@@ -668,7 +687,8 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
}
if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
- if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+ if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI ||
+ (AR_SREV_9280(ah) && !ah->ah_isPciExpress)) {
ah->ah_config.serialize_regmode =
SER_REG_MODE_ON;
} else {
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 0e80990..3c04044 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1336,6 +1336,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
printk(KERN_ERR "Unable to create debugfs files\n");
spin_lock_init(&sc->sc_resetlock);
+ spin_lock_init(&sc->sc_serial_rw);
mutex_init(&sc->mutex);
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a611ad8..847057d 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -575,13 +575,17 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
r = fill_ctrlset(mac, skb);
if (r)
- return r;
+ goto fail;
info->rate_driver_data[0] = hw;
r = zd_usb_tx(&mac->chip.usb, skb);
if (r)
- return r;
+ goto fail;
+ return 0;
+
+fail:
+ dev_kfree_skb(skb);
return 0;
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 94de503..37e3d5e 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -752,6 +752,8 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
skb_copy_queue_mapping(frag, first);
frag->do_not_encrypt = first->do_not_encrypt;
+ frag->dev = first->dev;
+ frag->iif = first->iif;
pos += copylen;
left -= copylen;
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index e28e2b8..092ae6f 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -102,3 +102,13 @@ config LIB80211_CRYPT_CCMP
config LIB80211_CRYPT_TKIP
tristate
+
+config LIB80211_DEBUG
+ bool "lib80211 debugging messages"
+ depends on LIB80211
+ default n
+ ---help---
+ You can enable this if you want verbose debugging messages
+ from lib80211.
+
+ If unsure, say N.
diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c
index db42819..2301dc1 100644
--- a/net/wireless/lib80211_crypt_ccmp.c
+++ b/net/wireless/lib80211_crypt_ccmp.c
@@ -337,6 +337,7 @@ static int lib80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
pos += 8;
if (ccmp_replay_check(pn, key->rx_pn)) {
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "CCMP: replay detected: STA=%pM "
"previous PN %02x%02x%02x%02x%02x%02x "
@@ -346,6 +347,7 @@ static int lib80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
key->rx_pn[3], key->rx_pn[4], key->rx_pn[5],
pn[0], pn[1], pn[2], pn[3], pn[4], pn[5]);
}
+#endif
key->dot11RSNAStatsCCMPReplays++;
return -4;
}
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index 7e8e22b..c362873 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -465,12 +465,14 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
pos += 8;
if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
" previous TSC %08x%04x received TSC "
"%08x%04x\n", hdr->addr2,
tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
}
+#endif
tkey->dot11RSNAStatsTKIPReplays++;
return -4;
}
@@ -505,10 +507,12 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
* it needs to be recalculated for the next packet. */
tkey->rx_phase1_done = 0;
}
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "TKIP: ICV error detected: STA="
"%pM\n", hdr->addr2);
}
+#endif
tkey->dot11RSNAStatsTKIPICVErrors++;
return -5;
}
--
John W. Linville Someday the world will need a hero, and you
linville@...driver.com might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists