lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OF4B79F4DE.4DC6DEA7-ONC1257583.007ECBEA-C1257583.007F2805@transmode.se>
Date:	Wed, 25 Mar 2009 00:08:53 +0100
From:	Joakim Tjernlund <Joakim.Tjernlund@...nsmode.se>
To:	David Miller <davem@...emloft.net>
Cc:	avorontsov@...mvista.com, leoli@...escale.com,
	linuxppc-dev@...abs.org, netdev@...r.kernel.org
Subject: Re: [PATCH] ucc_geth: Convert to net_device_ops

David Miller <davem@...emloft.net> wrote on 24/03/2009 23:49:02:
> 
> From: Joakim Tjernlund <Joakim.Tjernlund@...nsmode.se>
> Date: Tue, 24 Mar 2009 23:45:13 +0100
> 
> > I don't follow. Are these mandatory now? They were not in the old
> > impl. either.
> 
> See ether_setup() which is called indirectly via alloc_etherdev().
> 
> Yawn...

Same here, getting tiered. Should have seen that. Here goes,
attatched as well as explained earlier.

    Jocke
>From 651fcd7d1ba494f2e2f20da51196b1b3dccdcd68 Mon Sep 17 00:00:00 2001
From: Joakim Tjernlund <Joakim.Tjernlund@...nsmode.se>
Date: Fri, 20 Mar 2009 21:09:14 +0100
Subject: [PATCH] ucc_geth: Convert to net_device_ops

---
 drivers/net/ucc_geth.c |   24 +++++++++++++++---------
 1 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 7716239..097aed8 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3501,6 +3501,20 @@ static phy_interface_t to_phy_interface(const char 
*phy_connection_type)
        return PHY_INTERFACE_MODE_MII;
 }
 
+static const struct net_device_ops ucc_geth_netdev_ops = {
+       .ndo_open               = ucc_geth_open,
+       .ndo_stop               = ucc_geth_close,
+       .ndo_start_xmit         = ucc_geth_start_xmit,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_set_multicast_list = ucc_geth_set_multi,
+       .ndo_tx_timeout         = ucc_geth_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = ucc_netpoll,
+#endif
+};
+
 static int ucc_geth_probe(struct of_device* ofdev, const struct 
of_device_id *match)
 {
        struct device *device = &ofdev->dev;
@@ -3716,19 +3730,11 @@ static int ucc_geth_probe(struct of_device* ofdev, 
const struct of_device_id *ma
 
        /* Fill in the dev structure */
        uec_set_ethtool_ops(dev);
-       dev->open = ucc_geth_open;
-       dev->hard_start_xmit = ucc_geth_start_xmit;
-       dev->tx_timeout = ucc_geth_timeout;
+       dev->netdev_ops = &ucc_geth_netdev_ops;
        dev->watchdog_timeo = TX_TIMEOUT;
        INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
        netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 
UCC_GETH_DEV_WEIGHT);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = ucc_netpoll;
-#endif
-       dev->stop = ucc_geth_close;
-//    dev->change_mtu = ucc_geth_change_mtu;
        dev->mtu = 1500;
-       dev->set_multicast_list = ucc_geth_set_multi;
 
        ugeth->msg_enable = netif_msg_init(debug.msg_enable, 
UGETH_MSG_DEFAULT);
        ugeth->phy_interface = phy_interface;
-- 
1.6.1.3


Download attachment "0001-ucc_geth-Convert-to-net_device_ops.patch" of type "application/octet-stream" (2041 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ