lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1237945752-14362-1-git-send-email-brian.haley@hp.com>
Date:	Tue, 24 Mar 2009 21:49:12 -0400
From:	Brian Haley <brian.haley@...com>
To:	davem@...emloft.net, yoshfuji@...ux-ipv6.org
Cc:	linux@...la.no, netdev@...r.kernel.org
Subject: [PATCH] IPv6: Add 'autoconf' and 'disable_ipv6' module parameters

This is the quick and easy patch to add autoconf and
disable_ipv6 module parameters to IPv6.  I don't think anything
more complicated is needed, assuming you play with the /etc
configuration files.

For example, if you wanted to enable IPv6 just on 'lo' you
would:

1. Add "ipv6" to /etc/modules (if you don't, step #3 might fail)

2. Add this to /etc/modprobe.conf:

	options ipv6 disable_ipv6=1

3. Add these to /etc/sysctl.conf:

	net.ipv6.conf.all.disable_ipv6=0
	net.ipv6.conf.lo.disable_ipv6=0

# ip -6 a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever

The wording can probably be cleaned-up a little in ipv6.txt,
comments welcome.


---------------------------------------------------------------

Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module.

The first controls if IPv6 addresses are autoconfigured from
prefixes received in Router Advertisements.  The IPv6 loopback
(::1) and link-local addresses are still configured.

The second controls if IPv6 addresses are desired at all.  No
IPv6 addresses will be added to any interfaces.

Signed-off-by: Brian Haley <brian.haley@...com>
---
 Documentation/networking/ipv6.txt |   37 +++++++++++++++++++++++++++++++++++++
 include/linux/ipv6.h              |    6 ++++++
 net/ipv6/addrconf.c               |   12 +++++++++---
 net/ipv6/af_inet6.c               |   22 +++++++++++++++++-----
 4 files changed, 69 insertions(+), 8 deletions(-)

diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
index 268e5c1..9fd7e21 100644
--- a/Documentation/networking/ipv6.txt
+++ b/Documentation/networking/ipv6.txt
@@ -33,3 +33,40 @@ disable
 
 		A reboot is required to enable IPv6.
 
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 476d946..c662efa 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -169,6 +169,12 @@ struct ipv6_devconf {
 	__s32		accept_dad;
 	void		*sysctl;
 };
+
+struct ipv6_params {
+	__s32 disable_ipv6;
+	__s32 autoconf;
+};
+extern struct ipv6_params ipv6_defaults;
 #endif
 
 /* index values for the variables in ipv6_devconf */
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8499da9..da6f01e 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1784,6 +1784,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 	__u32 prefered_lft;
 	int addr_type;
 	struct inet6_dev *in6_dev;
+	struct net *net = dev_net(dev);
 
 	pinfo = (struct prefix_info *) opt;
 
@@ -1841,7 +1842,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 		if (addrconf_finite_timeout(rt_expires))
 			rt_expires *= HZ;
 
-		rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
+		rt = rt6_lookup(net, &pinfo->prefix, NULL,
 				dev->ifindex, 1);
 
 		if (rt && addrconf_is_prefix_route(rt)) {
@@ -1874,11 +1875,11 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 
 	/* Try to figure out our local address for this prefix */
 
-	if (pinfo->autoconf && in6_dev->cnf.autoconf) {
+	if (pinfo->autoconf && in6_dev->cnf.autoconf &&
+	    net->ipv6.devconf_all->autoconf) {
 		struct inet6_ifaddr * ifp;
 		struct in6_addr addr;
 		int create = 0, update_lft = 0;
-		struct net *net = dev_net(dev);
 
 		if (pinfo->prefix_len == 64) {
 			memcpy(&addr, &pinfo->prefix, 8);
@@ -4378,6 +4379,11 @@ static int addrconf_init_net(struct net *net)
 		dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
 		if (dflt == NULL)
 			goto err_alloc_dflt;
+	} else {
+		/* these will be inherited by all namespaces */
+		all->autoconf = dflt->autoconf = ipv6_defaults.autoconf;
+		all->disable_ipv6 = dflt->disable_ipv6 =
+			ipv6_defaults.disable_ipv6;
 	}
 
 	net->ipv6.devconf_all = all;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index fbf533c..7278dce 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,9 +72,21 @@ MODULE_LICENSE("GPL");
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
-static int disable_ipv6 = 0;
-module_param_named(disable, disable_ipv6, int, 0);
-MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+struct ipv6_params ipv6_defaults = {
+	.disable_ipv6 = 0,
+	.autoconf = 1,
+};
+
+static int disable_ipv6_mod = 0;
+
+module_param_named(disable, disable_ipv6_mod, int, 0444);
+MODULE_PARM_DESC(disable, "Disable IPv6 module such that it is non-functional");
+
+module_param_named(disable_ipv6, ipv6_defaults.disable_ipv6, int, 0444);
+MODULE_PARM_DESC(disable_ipv6, "Disable IPv6 on all interfaces");
+
+module_param_named(autoconf, ipv6_defaults.autoconf, int, 0444);
+MODULE_PARM_DESC(autoconf, "Enable IPv6 address autoconfiguration on all interfaces");
 
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
@@ -1013,7 +1025,7 @@ static int __init inet6_init(void)
 	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
 		INIT_LIST_HEAD(r);
 
-	if (disable_ipv6) {
+	if (disable_ipv6_mod) {
 		printk(KERN_INFO
 		       "IPv6: Loaded, but administratively disabled, "
 		       "reboot required to enable\n");
@@ -1202,7 +1214,7 @@ module_init(inet6_init);
 
 static void __exit inet6_exit(void)
 {
-	if (disable_ipv6)
+	if (disable_ipv6_mod)
 		return;
 
 	/* First of all disallow new sockets creation. */
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ