netdev - [PATCH 2/9] ixgbe: Fix ethtool output with advertised mode.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 01 Apr 2009 00:33:02 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	netdev@...r.kernel.org, gospo@...hat.com,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Mallikarjuna R Chilakala <mallikarjuna.chilakala@...el.com>,
	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [PATCH 2/9] ixgbe: Fix ethtool output with advertised mode.

From: Don Skidmore <donald.c.skidmore@...el.com>

Ethtool tries to get advertised speed from phy.autoneg_advertised.
However for copper media this wasn't happening until later do to
an other fix which moved mac.ops.setup_link_speed placement in
ixgbe_link_config(). This patch will display the default advertised
speeds if it can't yet get this information from phy.autoneg_advertised.

Signed-off-by: Don Skidmore <donald.c.skidmore@...el.com>
Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@...el.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---

 drivers/net/ixgbe/ixgbe_ethtool.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 18ecba7..34b4a84 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -129,6 +129,15 @@ static int ixgbe_get_settings(struct net_device *netdev,
 			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
 			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+		/*
+		 * It's possible that phy.autoneg_advertised may not be
+		 * set yet.  If so display what the default would be -
+		 * both 1G and 10G supported.
+		 */
+		if (!(ecmd->advertising & (ADVERTISED_1000baseT_Full |
+					   ADVERTISED_10000baseT_Full)))
+			ecmd->advertising |= (ADVERTISED_10000baseT_Full |
+					      ADVERTISED_1000baseT_Full);
 
 		ecmd->port = PORT_TP;
 	} else if (hw->phy.media_type == ixgbe_media_type_backplane) {

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html