netdev - Re: 2.6.30-rc1 A few issues and a stall

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1239591031.4445.4091.camel@minggr.sh.intel.com>
Date:	Mon, 13 Apr 2009 10:50:31 +0800
From:	Lin Ming <ming.m.lin@...el.com>
To:	Ed Tomlinson <edt@....ca>
Cc:	Zhang Rui <rui.zhang@...el.com>,
	LKML <linux-kernel@...r.kernel.org>, Avi Kivity <avi@...hat.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>
Subject: Re: 2.6.30-rc1 A few issues and a stall

On Mon, 2009-04-13 at 10:05 +0800, Zhang Rui wrote:
> On Sun, 2009-04-12 at 23:24 +0800, Ed Tomlinson wrote:
> > Hi,
> > 
> > I got tired of building out of tree DRM drivers so decided to try 2.6.30-rc1.  For simple tasks
> > it works fine, for slightly more complex ones it is not quite as good...
> > 
> > Here is an example.  I normally start a kvm session with the commands below:
> > 
> > ed@...ver ~/vm $ sudo modprobe tun
> > ed@...ver ~/vm $ sudo brctl addbr br0
> > ed@...ver ~/vm $ sudo ifconfig br0 192.168.100.254 netmask 255.255.255.0 up
> > ed@...ver ~/vm $ sudo tunctl -b -u ed -t qtap0
> > qtap0
> > ed@...ver ~/vm $ sudo brctl addif br0 qtap0
> > ed@...ver ~/vm $ sudo ifconfig qtap0 up 0.0.0.0 promisc
> > ed@...ver ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> > iptables v1.4.2: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
> > Perhaps iptables or your kernel needs to be upgraded.
> > 
> > Issue 1 - I need to manually modprobe be get iptables to work.  This exact procedure worked in 2.6.29.
> > 
> > ed@...ver ~/vm $ sudo modprobe nf_nat
> > ed@...ver ~/vm $ sudo modprobe ipt_MASQUERADE
> > ed@...ver ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> > 
> > Once the above networking stuff is setup I start kvm with the command below
> > 
> > QEMU_AUDIO_DRV=alsa kvm -m 1024 -cdrom /mnt/sdc4/divx/archlinux-2009.02-ftp-i686.iso -boot c -smp 3 -usb -usbdevice tablet -vga std -drive file=arch.img -net nic,macaddr=52:54:00:12:34:23 -net tap,ifname=qtap0,script=no -soundhw all -mem-path /hugepages
> > 
> > which works and the kvm session boots just fine.  
> > 
> > Issue 2.  When I attempt to ping outside the kvm session the pc (not just the kvm session) hangs.
> > Its impossible to kill the kvm session and there are numerious info messages from RCU (tree RCU enabled)
> > about stalls.  
> > 
> > Issue 3.  ACPI is having fun during startup.  This does not seem to cause problems later but is 
> > noisy and probably should be fixed before .30's release.
> > 
> this is a duplicate of bug
> http://bugzilla.kernel.org/show_bug.cgi?id=13036
> please try the patch in comment #6 there and see if it helps.

please also have a try the patch in comment #10 (don't apply the patch
in comment #6).

Thanks.

> 
> thanks,
> rui
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html