Message-ID: <20090417050530.GB6885@linux.vnet.ibm.com>
Date:	Thu, 16 Apr 2009 22:05:30 -0700
From:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To:	Mathieu Desnoyers <mathieu.desnoyers@...ymtl.ca>
Cc:	David Miller <davem@...emloft.net>, kaber@...sh.net,
	torvalds@...ux-foundation.org, shemminger@...tta.com,
	dada1@...mosbay.com, jeff.chua.linux@...il.com, paulus@...ba.org,
	mingo@...e.hu, laijs@...fujitsu.com, jengelh@...ozas.de,
	r000n@...0n.net, linux-kernel@...r.kernel.org,
	netfilter-devel@...r.kernel.org, netdev@...r.kernel.org,
	benh@...nel.crashing.org
Subject: Re: [PATCH] netfilter: use per-cpu spinlock rather than RCU (v3)

On Thu, Apr 16, 2009 at 10:19:02PM -0400, Mathieu Desnoyers wrote:
> * Paul E. McKenney (paulmck@...ux.vnet.ibm.com) wrote:
> > On Thu, Apr 16, 2009 at 04:49:55PM -0700, Paul E. McKenney wrote:
> > > On Thu, Apr 16, 2009 at 03:33:54PM -0700, David Miller wrote:
> > > > From: Patrick McHardy <kaber@...sh.net>
> > > > Date: Thu, 16 Apr 2009 15:11:31 +0200
> > > > 
> > > > > Linus Torvalds wrote:
> > > > >> On Wed, 15 Apr 2009, Stephen Hemminger wrote:
> > > > >>> The counters are the bigger problem, otherwise we could just free
> > > > >>> table
> > > > >>> info via rcu.  Do we really have to support: replace where the counter
> > > > >>> values coming out to user space are always exactly accurate, or is it
> > > > >>> allowed to replace a rule and maybe lose some counter ticks (worst
> > > > >>> case
> > > > >>> NCPU-1).
> > > > >> Why not just read the counters fromt he old one at RCU free time (they
> > > > >> are guaranteed to be stable at that point, since we're all done with
> > > > >> those entries), and apply them at that point to the current setup?
> > > > > 
> > > > > We need the counters immediately to copy them to userspace, so waiting
> > > > > for an asynchronous RCU free is not going to work.
> > > > 
> > > > It just occurred to me that since all netfilter packet handling
> > > > goes through one place, we could have a sort-of "netfilter RCU"
> > > > of sorts to solve this problem.
> > > 
> > > OK, I am putting one together...
> > > 
> > > It will be needed sooner or later, though I suspect per-CPU locking
> > > would work fine in this case.
> > 
> > And here is a crude first cut.  Untested, probably does not even compile.
> > 
> > Straight conversion of Mathieu Desnoyers's user-space RCU implementation
> > at git://lttng.org/userspace-rcu.git to the kernel (and yes, I did help
> > a little, but he must bear the bulk of the guilt).
> 
> I'm innocent, I swear ;-)

That is what they -all- say!!!  ;-)

> That should give very impressive performance results.

I wouldn't expect more than about three or four orders of magnitude
improvement on the update side compared to Classic RCU, but who knows?

> Please see comments below,
> 
> >   Pick on srcu.h
> > and srcu.c out of sheer laziness.  User-space testing gives deep
> > sub-microsecond grace-period latencies, so should be fast enough, at
> > least if you don't mind two smp_call_function() invocations per grace
> > period and spinning on each instance of a per-CPU variable.
> > 
> > Again, I believe per-CPU locking should work fine for the netfilter
> > counters, but I guess "friends don't let friends use hashed locks".
> > (I would not know for sure, never having used them myself, except of
> > course to protect hash tables.)
> > 
> > Most definitely -not- for inclusion at this point.  Next step is to hack
> > up the relevant rcutorture code and watch it explode on contact.  ;-)
> > 
> > Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
> > ---
> > 
> >  include/linux/srcu.h |   30 ++++++++++++++++++++++++
> >  kernel/srcu.c        |   63 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 93 insertions(+)
> > 
> > diff --git a/include/linux/srcu.h b/include/linux/srcu.h
> > index aca0eee..4577cd0 100644
> > --- a/include/linux/srcu.h
> > +++ b/include/linux/srcu.h
> > @@ -50,4 +50,34 @@ void srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
> >  void synchronize_srcu(struct srcu_struct *sp);
> >  long srcu_batches_completed(struct srcu_struct *sp);
> >  
> > +/* Single bit for grace-period index, low-order bits are nesting counter. */
> > +#define RCU_FGP_COUNT		1UL
> > +#define RCU_FGP_PARITY		(1UL << (sizeof(long) << 2))
> > +#define RCU_FGP_NEST_MASK	(RCU_FGP_PARITY - 1)
> > +
> > +extern long rcu_fgp_ctr;
> > +DECLARE_PER_CPU(long, rcu_fgp_active_readers);
> > +
> > +static inline void rcu_read_lock_fgp(void)
> > +{
> > +	long tmp;
> > +	long *uarp;
> > +
> > +	preempt_disable();
> > +	uarp = &__get_cpu_var(rcu_fgp_active_readers);
> 
> OK, so we are translating the original implementation from per-thread to
> per-cpu, with preemption disabled. Fine with me if we can't afford the
> per-thread unsigned long nor can't afford to iterate on each thread when
> waiting for RCU quiescent state.

The iterating on each thread was what stopped me.

> > +	tmp = *uarp;
> > +	if (likely(!(tmp & RCU_FGP_NEST_MASK)))
> > +		*uarp = rcu_fgp_ctr;  /* Outermost rcu_read_lock(). */
> 
> ACCESS_ONCE(rcu_fgp_ctr) could not hurt here I think. Given the
> surrounding code, that does not seem like a necessity, but that would
> express that it is really an atomic read.

I believe that it is safe.  Only one bit of rcu_fgp_ctr ever changes,
so we should be immune from load tearing.  We only load it once and
only do one thing with it, and we have a barrier() before (as part
of preempt_disable()) and after, so I don't think that the compiler
has much latitude here.  In theory, we could get store tearing through
*uarp, but if gcc did that, much of the kernel would go down in flames.

In contrast, in the user-mode version, there was no barrier() on entry,
permitting the compiler much more mischief.

> > +	else
> > +		*uarp = tmp + RCU_FGP_COUNT;  /* Nested rcu_read_lock(). */
> > +	barrier();
> 
> I kind of expect an IPI with a smp_mb() to promote this barrier() to a
> smp_mb() when the update side needs to wait for a quiescent state. I
> guess a comment telling this here would not hurt.

If you insist.  ;-)

> > +}
> > +
> > +static inline void rcu_read_unlock_fgp(void)
> > +{
> > +	barrier();
> 
> Same here.

Likewise!

> > +	__get_cpu_var(rcu_fgp_active_readers)--;
> > +	preempt_enable();
> > +}
> > +
> >  #endif
> > diff --git a/kernel/srcu.c b/kernel/srcu.c
> > index b0aeeaf..a5dc464 100644
> > --- a/kernel/srcu.c
> > +++ b/kernel/srcu.c
> > @@ -255,3 +255,66 @@ EXPORT_SYMBOL_GPL(srcu_read_lock);
> >  EXPORT_SYMBOL_GPL(srcu_read_unlock);
> >  EXPORT_SYMBOL_GPL(synchronize_srcu);
> >  EXPORT_SYMBOL_GPL(srcu_batches_completed);
> > +
> > +DEFINE_MUTEX(rcu_fgp_mutex);
> > +long rcu_fgp_ctr = RCU_FGP_COUNT;
> 
> Saying why we populate the value 1 here (RCU_FGP_COUNT) as an
> optimization for the read-side might help understanding this choice.

Good point, done.

> > +DEFINE_PER_CPU(long, rcu_fgp_active_readers);
> > +
> > +/*
> > + * Determine if the specified counter value indicates that we need to
> > + * wait on the corresponding CPU to exit an rcu_fgp read-side critical
> > + * section.  Return non-zero if so.
> > + *
> > + * Assumes that rcu_fgp_mutex is held, and thus that rcu_fgp_ctr is
> > + * unchanging.
> > + */
> > +static inline int rcu_old_fgp_ongoing(long *value)
> > +{
> > +	long v = ACCESS_ONCE(*value);
> > +
> > +	return (v & RCU_FGP_NEST_MASK) &&
> > +	       ((v ^ rcu_fgp_ctr) & RCU_FGP_PARITY);
> > +}
> > +
> > +static void rcu_fgp_wait_for_quiescent_state(void)
> > +{
> > +	int cpu;
> > +	long *uarp;
> > +
> > +	for_each_online_cpu(cpu) {
> > +		uarp = &per_cpu(rcu_fgp_active_readers, cpu);
> > +		while (rcu_old_fgp_ongoing(uarp))
> > +			cpu_relax();
> 
> I would be tempted to add a comment here telling hot cpu hotunplug
> cannot let us wait forever, given all read-side critical sections we can
> be busy-waiting for are required to have preemption disabled, and are
> therefore cpu-hotplug safe.

Good point -- I hadn't even considered CPU hotplug, so got very lucky.

> > +	}
> > +}
> > +
> > +static void rcu_fgp_do_mb(void *unused)
> > +{
> > +	smp_mb();  /* Each CPU does a memory barrier. */
> > +}
> 
> Ah, here it is. Commenting that it matches the two barrier()s I identified
> above would be good.

Good point, reworded.

> > +
> > +void synchronize_rcu_fgp(void)
> > +{
> > +	mutex_lock(&rcu_fgp_mutex);
> > +	
> > +	/* CPUs must see earlier change before parity flip. */
> > +	smp_call_function(rcu_fgp_do_mb, NULL, 1);
> 
> /*
>  * Call a function on all other processors
>  */
> int smp_call_function(void(*func)(void *info), void *info, int wait);
> 
> I guess you meant on_each_cpu ? That should include "self", given we
> also need the smp_mb().

Hmmm...  Why do we need "self"?  Because synchronize_rcu_fgp() blocks,
it had jolly well better not be within a read-side critical section.

So, what am I missing here?

> > +
> > +	/*
> > +	 * We must flip twice to correctly handle tasks that stall
> > +	 * in rcu_read_lock_fgp() between the time that they fetch
> > +	 * rcu_fgp_ctr and the time that the store to their CPU's
> > +	 * rcu_fgp_active_readers.  No matter when they resume
> > +	 * execution, we will wait for them to get to the corresponding
> > +	 * rcu_read_unlock_fgp().
> > +	 */
> > +	ACCESS_ONCE(rcu_fgp_ctr) ^= RCU_FGP_PARITY;  /* flip parity 0 -> 1 */
> > +	rcu_fgp_wait_for_quiescent_state();	     /* wait for old readers */
> > +	ACCESS_ONCE(rcu_fgp_ctr) ^= RCU_FGP_PARITY;  /* flip parity 1 -> 0 */
> > +	rcu_fgp_wait_for_quiescent_state();	     /* wait for old readers */
> > +
> > +	/* Prevent CPUs from reordering out of prior RCU critical sections. */
> > +	smp_call_function(rcu_fgp_do_mb, NULL, 1);
> > +
> 
> Same as above.

Same as above.  ;-)

> Mathieu, who can still recognise his original userspace implementation
> :-)

Yeah, I never was all that good at disguising code anyway.  But I did
keep a couple of changes.  ;-)

Updated patch below.

							Thanx, Paul

------------------------------------------------------------------------

And here is a crude second cut.  Untested, probably does not even compile.

Straight conversion of Mathieu Desnoyers's user-space RCU implementation
at git://lttng.org/userspace-rcu.git to the kernel (and yes, I did help
a little, but he must bear the bulk of the guilt).  Pick on srcu.h
and srcu.c out of sheer laziness.  User-space testing gives deep
sub-microsecond grace-period latencies, so should be fast enough, at
least if you don't mind two smp_call_function() invocations per grace
period and spinning on each instance of a per-CPU variable.

Again, I believe per-CPU locking should work fine for the netfilter
counters, but I guess "friends don't let friends use hashed locks".
(I would not know for sure, never having used them myself, except of
course to protect hash tables.)

Most definitely -not- for inclusion at this point.  Next step is to hack
up the relevant rcutorture code and watch it explode on contact.  ;-)

Changes since v1:

o	Applied Mathieu's feedback.

o	Added docbook headers and other comments.

o	Added the rcu_fgp_batches_completed API required by rcutorture.

Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
---

 include/linux/srcu.h |   42 ++++++++++++++++++++++++
 kernel/srcu.c        |   89 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 131 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists