netdev - tulip_rxtx_stop() on Cobalt Qube2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <200905011238.59345.florian@openwrt.org>
Date:	Fri, 1 May 2009 12:38:57 +0200
From:	Florian Fainelli <florian@...nwrt.org>
To:	netdev@...r.kernel.org, grundler@...isc-linux.org, kyle@...artin.ca
Subject: tulip_rxtx_stop() on Cobalt Qube2

Hi Grant, Kyle,

I just updated my Qube2 to run a 2.6.30-rc2-00476-gd678033 kernel (also seen 
on a 2.6.29-rc2-00462-gfa04b54) and I get the following message while booting 
the box now, I have not git bisected the offending commit yet :

[snip]
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: Old format EEPROM on 'Cobalt Microserver' board.  Using substitute 
media control info.
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x12082000, 00:10:e0:00:7d:1f, 
IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: Old format EEPROM on 'Cobalt Microserver' board.  Using substitute 
media control info.
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0x12082400, 00:10:e0:00:88:b9, 
IRQ 20.
[snip]
0000:00:07.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb20e2202)
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.

The interface is still fully functional, shall we increase the timeount in 
tulip_stop_rxtx() to prevent this message from appearing ?

Thanks a lot in advance for your answer.
-- 
Best regards, Florian Fainelli
Email : florian@...nwrt.org
http://openwrt.org
-------------------------------
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html