| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1242117363-14949-3-git-send-email-leoli@freescale.com>
Date: Tue, 12 May 2009 16:36:00 +0800
From: Li Yang <leoli@...escale.com>
To: akpm@...ux-foundation.org, galak@...nel.crashing.org,
davem@...emloft.net, mporter@...nel.crashing.org
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org,
netdev@...r.kernel.org, Li Yang <leoli@...escale.com>,
Zhang Wei <zw@...kernel.org>
Subject: [PATCH 3/6] powerpc: add memory map support to Freescale RapidIO block
The RIO memory map functions are used to support direct IO memory access
to RapidIO space. The patch adds its support for Freescale RapidIO block
driver.
Signed-off-by: Zhang Wei <zw@...kernel.org>
Signed-off-by: Li Yang <leoli@...escale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 217 ++++++++++++++++++++++++++++++++++++++++-
1 files changed, 215 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index fa0720f..7056dc0 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -31,6 +31,9 @@
#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+#define IS_64BIT_DMA ((sizeof(dma_addr_t) == 8) ? 1 : 0)
+#define IS_64BIT_PHYS ((sizeof(phys_addr_t) == 8) ? 1 : 0)
+
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_P_MSG_REGS_OFFSET 0x11000
#define RIO_S_MSG_REGS_OFFSET 0x13000
@@ -40,6 +43,15 @@
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
+#define RIO_MAX_INB_ATMU 4
+#define RIO_MAX_OUTB_ATMU 8
+#define RIO_INB_ATMU_REGS_OFFSET 0x10de0
+#define RIO_ATMU_EN_MASK 0x80000000
+
+#define RIO_NREAD 0x4
+#define RIO_NWRITE 0x4
+#define RIO_NWRITE_R 0x5
+#define RIO_NREAD_R 0x5
#define RIO_MSG_OMR_MUI 0x00000002
#define RIO_MSG_OSR_TE 0x00000080
@@ -83,6 +95,15 @@ struct rio_atmu_regs {
u32 pad3[3];
};
+struct rio_inb_atmu_regs {
+ u32 riwtar;
+ u32 pad1;
+ u32 riwbar;
+ u32 pad2;
+ u32 riwar;
+ u32 pad3[3];
+};
+
struct rio_msg_regs {
u32 omr;
u32 osr;
@@ -341,6 +362,188 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
}
/**
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+ resource_size_t rstart, resource_size_t size, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD_R << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ dev_err(mport->dev, "The local address 0x%llx can not be "
+ "aligned to the same size 0x%llx with the RapidIO "
+ "space address 0x%llx!\n", (unsigned long long)lstart,
+ (unsigned long long)size, (unsigned long long)rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free inbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+ i++, inbatmu--)
+ ;
+
+ if (i > RIO_MAX_INB_ATMU) {
+ dev_err(mport->dev, "No free inbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&inbatmu->riwtar, ((IS_64BIT_DMA ? (lstart >> 32)
+ & 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwbar, ((IS_64BIT_DMA ? (rstart >> 32)
+ & 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, phys_addr_t lstart,
+ resource_size_t rstart, resource_size_t size,
+ u16 tid, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ dev_err(mport->dev, "The local address 0x%llx can not be "
+ "aligned to the same size 0x%llx with the RapidIO "
+ "space address 0x%llx!\n", (unsigned long long)lstart,
+ (unsigned long long)size, (unsigned long long)rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free outbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+ i++, outbatmu++)
+ ;
+
+ if (i > RIO_MAX_OUTB_ATMU) {
+ dev_err(mport->dev, "No free outbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+ | ((IS_64BIT_PHYS ? (rstart >> 32) & 0x3 : 0) << 20)
+ | ((rstart >> 12) & 0xfffff));
+ if (mport->phy_type == RIO_PHY_SERIAL)
+ out_be32(&outbatmu->rowtear, tid >> 10);
+ out_be32(&outbatmu->rowbar, ((IS_64BIT_PHYS ?
+ (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff));
+ out_be32(&outbatmu->rowar, 0x80000000
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport,
+ dma_addr_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_inb_atmu_regs __iomem *inbatmu = (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+ /* Search for inbound ATMU */
+ for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+ u32 tar = ((IS_64BIT_DMA ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (inbatmu->riwtar == tar) {
+ out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * fsl_rio_unmap_outb_mem -- Unmapping outbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport,
+ phys_addr_t lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+ /* Search for outbound ATMU */
+ for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+ u32 bar = ((IS_64BIT_PHYS ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (outbatmu->rowbar == bar) {
+ out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
* rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
* @mport: Master port with outbound message queue
* @rdev: Target of outbound message
@@ -951,6 +1154,13 @@ static int fsl_rio_get_cmdline(char *s)
__setup("riohdid=", fsl_rio_get_cmdline);
+static struct rio_mem_ops fsl_mem_ops = {
+ .map_inb = fsl_rio_map_inb_mem,
+ .map_outb = fsl_rio_map_outb_mem,
+ .unmap_inb = fsl_rio_unmap_inb_mem,
+ .unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
@@ -1026,8 +1236,9 @@ int fsl_rio_setup(struct of_device *dev)
return -EFAULT;
}
dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
- dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start,
- regs.end - regs.start + 1);
+ dev_info(&dev->dev, "Regs start 0x%llx size 0x%llx\n",
+ (unsigned long long)regs.start,
+ (unsigned long long)(regs.end - regs.start + 1));
dt_range = of_get_property(dev->node, "ranges", &rlen);
if (!dt_range) {
@@ -1067,6 +1278,7 @@ int fsl_rio_setup(struct of_device *dev)
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
port->index = 0;
+ port->dev = &dev->dev;
priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
if (!priv) {
@@ -1095,6 +1307,7 @@ int fsl_rio_setup(struct of_device *dev)
priv->dev = &dev->dev;
port->ops = ops;
+ port->mops = &fsl_mem_ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
port->priv = priv;
--
1.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists