[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20090517223352.14124.2401.stgit@localhost.localdomain>
Date: Sun, 17 May 2009 15:33:52 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-scsi@...r.kernel.org,
Yi Zou <yi.zou@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 PATCH 05/11] ixgbe: Add RING_F_FCOE for FCoE feature in
82599
From: Yi Zou <yi.zou@...el.com>
Add ring feature for FCoE to make use of the FCoE redirection
table in 82599. The FCoE redirection table is a receive side
scaling feature for Fiber Channel over Ethernet feature in 82599,
enabling distributing FCoE packets to different receive queues
based on the exchange id.
Signed-off-by: Yi Zou <yi.zou@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe.h | 6 +++
drivers/net/ixgbe/ixgbe_main.c | 96 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 102 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index db6d3ea..94b0465 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -161,6 +161,9 @@ enum ixgbe_ring_f_enum {
RING_F_DCB,
RING_F_VMDQ,
RING_F_RSS,
+#ifdef IXGBE_FCOE
+ RING_F_FCOE,
+#endif /* IXGBE_FCOE */
RING_F_ARRAY_SIZE /* must be last in enum set */
};
@@ -168,6 +171,9 @@ enum ixgbe_ring_f_enum {
#define IXGBE_MAX_DCB_INDICES 8
#define IXGBE_MAX_RSS_INDICES 16
#define IXGBE_MAX_VMDQ_INDICES 16
+#ifdef IXGBE_FCOE
+#define IXGBE_MAX_FCOE_INDICES 8
+#endif /* IXGBE_FCOE */
struct ixgbe_ring_feature {
int indices;
int mask;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index fe0ac8b..68edeab 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1756,6 +1756,17 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
else
dev_err(&adapter->pdev->dev, "Invalid DCB "
"configuration\n");
+#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ struct ixgbe_ring_feature *f;
+
+ rx_ring = &adapter->rx_ring[queue0];
+ f = &adapter->ring_feature[RING_F_FCOE];
+ if ((queue0 == 0) && (index > rx_ring->reg_idx))
+ queue0 = f->mask + index -
+ rx_ring->reg_idx - 1;
+ }
+#endif /* IXGBE_FCOE */
} else {
queue0 = index;
}
@@ -2842,6 +2853,47 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
return ret;
}
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
+ * @adapter: board private structure to initialize
+ *
+ * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
+ * The ring feature mask is not used as a mask for FCoE, as it can take any 8
+ * rx queues out of the max number of rx queues, instead, it is used as the
+ * index of the first rx queue used by FCoE.
+ *
+ **/
+static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
+{
+ bool ret = false;
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+ f->indices = min((int)num_online_cpus(), f->indices);
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ DPRINTK(PROBE, INFO, "FCOE enabled with DCB \n");
+ ixgbe_set_dcb_queues(adapter);
+ }
+#endif
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
+ ixgbe_set_rss_queues(adapter);
+ }
+ /* adding FCoE rx rings to the end */
+ f->mask = adapter->num_rx_queues;
+ adapter->num_rx_queues += f->indices;
+ if (adapter->num_tx_queues == 0)
+ adapter->num_tx_queues = f->indices;
+
+ ret = true;
+ }
+
+ return ret;
+}
+
+#endif /* IXGBE_FCOE */
/*
* ixgbe_set_num_queues: Allocate queues for device, feature dependant
* @adapter: board private structure to initialize
@@ -2855,6 +2907,11 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
**/
static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
{
+#ifdef IXGBE_FCOE
+ if (ixgbe_set_fcoe_queues(adapter))
+ goto done;
+
+#endif /* IXGBE_FCOE */
#ifdef CONFIG_IXGBE_DCB
if (ixgbe_set_dcb_queues(adapter))
goto done;
@@ -3030,6 +3087,39 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
}
#endif
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
+ *
+ */
+static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
+{
+ int i, fcoe_i = 0;
+ bool ret = false;
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ ixgbe_cache_ring_dcb(adapter);
+ fcoe_i = adapter->rx_ring[0].reg_idx + 1;
+ }
+#endif /* CONFIG_IXGBE_DCB */
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ ixgbe_cache_ring_rss(adapter);
+ fcoe_i = f->mask;
+ }
+ for (i = 0; i < f->indices; i++, fcoe_i++)
+ adapter->rx_ring[f->mask + i].reg_idx = fcoe_i;
+ ret = true;
+ }
+ return ret;
+}
+
+#endif /* IXGBE_FCOE */
/**
* ixgbe_cache_ring_register - Descriptor ring to register mapping
* @adapter: board private structure to initialize
@@ -3047,6 +3137,11 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
adapter->rx_ring[0].reg_idx = 0;
adapter->tx_ring[0].reg_idx = 0;
+#ifdef IXGBE_FCOE
+ if (ixgbe_cache_ring_fcoe(adapter))
+ return;
+
+#endif /* IXGBE_FCOE */
#ifdef CONFIG_IXGBE_DCB
if (ixgbe_cache_ring_dcb(adapter))
return;
@@ -3420,6 +3515,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->flags |= IXGBE_FLAG_RSC_ENABLED;
#ifdef IXGBE_FCOE
adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
#endif /* IXGBE_FCOE */
}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists