| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1242756539-19049-2-git-send-email-a.beregalov@gmail.com>
Date: Tue, 19 May 2009 22:08:59 +0400
From: Alexander Beregalov <a.beregalov@...il.com>
To: netdev@...r.kernel.org
Cc: Alexander Beregalov <a.beregalov@...il.com>
Subject: [PATCH 2/2] 3c5xx: convert printk() to pr_foo()
Signed-off-by: Alexander Beregalov <a.beregalov@...il.com>
---
Compile tested.
drivers/net/3c515.c | 115 +++++++++++++++----------------
drivers/net/3c523.c | 86 +++++++++++-----------
drivers/net/3c527.c | 46 ++++++-------
drivers/net/3c59x.c | 194 +++++++++++++++++++++++++-------------------------
4 files changed, 217 insertions(+), 224 deletions(-)
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 167bf23..3bc0889 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -420,7 +420,7 @@ int init_module(void)
if (debug >= 0)
corkscrew_debug = debug;
if (corkscrew_debug)
- printk(version);
+ pr_debug("%s", version);
while (corkscrew_scan(-1))
found++;
return found ? 0 : -ENODEV;
@@ -437,7 +437,7 @@ struct net_device *tc515_probe(int unit)
if (corkscrew_debug > 0 && !printed) {
printed = 1;
- printk(version);
+ pr_debug("%s", version);
}
return dev;
@@ -516,7 +516,7 @@ static struct net_device *corkscrew_scan(int unit)
if (pnp_device_attach(idev) < 0)
continue;
if (pnp_activate_dev(idev) < 0) {
- printk("pnp activate failed (out of resources?)\n");
+ pr_warning("pnp activate failed (out of resources?)\n");
pnp_device_detach(idev);
continue;
}
@@ -531,9 +531,9 @@ static struct net_device *corkscrew_scan(int unit)
continue;
}
if(corkscrew_debug)
- printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+ pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
- printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
SET_NETDEV_DEV(dev, &idev->dev);
@@ -552,7 +552,7 @@ no_pnp:
if (!check_device(ioaddr))
continue;
- printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
if (!err)
@@ -625,7 +625,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
list_add(&vp->list, &root_corkscrew_dev);
#endif
- printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+ pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
spin_lock_init(&vp->lock);
@@ -648,19 +648,19 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
}
checksum = (checksum ^ (checksum >> 8)) & 0xff;
if (checksum != 0x00)
- printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
- printk(" %pM", dev->dev_addr);
+ pr_err(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ pr_info(" %pM", dev->dev_addr);
if (eeprom[16] == 0x11c7) { /* Corkscrew */
if (request_dma(dev->dma, "3c515")) {
- printk(", DMA %d allocation failed", dev->dma);
+ pr_warning(", DMA %d allocation failed", dev->dma);
dev->dma = 0;
} else
- printk(", DMA %d", dev->dma);
+ pr_info(", DMA %d", dev->dma);
}
- printk(", IRQ %d\n", dev->irq);
+ pr_info(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
- printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n");
+ pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
{
char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
@@ -669,9 +669,9 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
vp->available_media = inw(ioaddr + Wn3_Options);
config = inl(ioaddr + Wn3_Config);
if (corkscrew_debug > 1)
- printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n",
+ pr_info(" Internal config register is %4.4x, transceivers %#x.\n",
config, inw(ioaddr + Wn3_Options));
- printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
8 << config & Ram_size,
config & Ram_width ? "word" : "byte",
ram_split[(config & Ram_split) >> Ram_split_shift],
@@ -682,7 +682,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
dev->if_port = vp->default_media;
}
if (vp->media_override != 7) {
- printk(KERN_INFO " Media override to transceiver type %d (%s).\n",
+ pr_info(" Media override to transceiver type %d (%s).\n",
vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
@@ -718,7 +718,7 @@ static int corkscrew_open(struct net_device *dev)
if (vp->media_override != 7) {
if (corkscrew_debug > 1)
- printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+ pr_info("%s: Media override to transceiver %d (%s).\n",
dev->name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
@@ -729,7 +729,7 @@ static int corkscrew_open(struct net_device *dev)
dev->if_port = media_tbl[dev->if_port].next;
if (corkscrew_debug > 1)
- printk("%s: Initial media type %s.\n",
+ pr_debug("%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
init_timer(&vp->timer);
@@ -744,7 +744,7 @@ static int corkscrew_open(struct net_device *dev)
outl(config, ioaddr + Wn3_Config);
if (corkscrew_debug > 1) {
- printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
+ pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
dev->name, config);
}
@@ -777,7 +777,7 @@ static int corkscrew_open(struct net_device *dev)
if (corkscrew_debug > 1) {
EL3WINDOW(4);
- printk("%s: corkscrew_open() irq %d media status %4.4x.\n",
+ pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
dev->name, dev->irq, inw(ioaddr + Wn4_Media));
}
@@ -814,8 +814,7 @@ static int corkscrew_open(struct net_device *dev)
if (vp->full_bus_master_rx) { /* Boomerang bus master. */
vp->cur_rx = vp->dirty_rx = 0;
if (corkscrew_debug > 2)
- printk("%s: Filling in the Rx ring.\n",
- dev->name);
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
if (i < (RX_RING_SIZE - 1))
@@ -877,7 +876,7 @@ static void corkscrew_timer(unsigned long data)
int ok = 0;
if (corkscrew_debug > 1)
- printk("%s: Media selection timer tick happened, %s.\n",
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
dev->name, media_tbl[dev->if_port].name);
spin_lock_irqsave(&vp->lock, flags);
@@ -894,12 +893,12 @@ static void corkscrew_timer(unsigned long data)
if (media_status & Media_LnkBeat) {
ok = 1;
if (corkscrew_debug > 1)
- printk("%s: Media %s has link beat, %x.\n",
+ pr_debug("%s: Media %s has link beat, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
} else if (corkscrew_debug > 1)
- printk("%s: Media %s is has no link beat, %x.\n",
+ pr_debug("%s: Media %s is has no link beat, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
@@ -907,7 +906,7 @@ static void corkscrew_timer(unsigned long data)
break;
default: /* Other media types handled by Tx timeouts. */
if (corkscrew_debug > 1)
- printk("%s: Media %s is has no indication, %x.\n",
+ pr_debug("%s: Media %s is has no indication, %x.\n",
dev->name,
media_tbl[dev->if_port].name,
media_status);
@@ -925,12 +924,12 @@ static void corkscrew_timer(unsigned long data)
if (dev->if_port == 8) { /* Go back to default. */
dev->if_port = vp->default_media;
if (corkscrew_debug > 1)
- printk("%s: Media selection failing, using default %s port.\n",
+ pr_debug("%s: Media selection failing, using default %s port.\n",
dev->name,
media_tbl[dev->if_port].name);
} else {
if (corkscrew_debug > 1)
- printk("%s: Media selection failed, now trying %s port.\n",
+ pr_debug("%s: Media selection failed, now trying %s port.\n",
dev->name,
media_tbl[dev->if_port].name);
vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
@@ -953,7 +952,7 @@ static void corkscrew_timer(unsigned long data)
spin_unlock_irqrestore(&vp->lock, flags);
if (corkscrew_debug > 1)
- printk("%s: Media selection timer finished, %s.\n",
+ pr_debug("%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
#endif /* AUTOMEDIA */
@@ -966,23 +965,21 @@ static void corkscrew_timeout(struct net_device *dev)
struct corkscrew_private *vp = netdev_priv(dev);
int ioaddr = dev->base_addr;
- printk(KERN_WARNING
- "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
dev->name, inb(ioaddr + TxStatus),
inw(ioaddr + EL3_STATUS));
/* Slight code bloat to be user friendly. */
if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
- printk(KERN_WARNING
- "%s: Transmitter encountered 16 collisions -- network"
+ pr_warning("%s: Transmitter encountered 16 collisions --"
" network cable problem?\n", dev->name);
#ifndef final_version
- printk(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
+ pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
vp->cur_tx);
- printk(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+ pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
&vp->tx_ring[0]);
for (i = 0; i < TX_RING_SIZE; i++) {
- printk(" %d: %p length %8.8x status %8.8x\n", i,
+ pr_debug(" %d: %p length %8.8x status %8.8x\n", i,
&vp->tx_ring[i],
vp->tx_ring[i].length, vp->tx_ring[i].status);
}
@@ -1023,7 +1020,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
else
prev_entry = NULL;
if (corkscrew_debug > 3)
- printk("%s: Trying to send a packet, Tx index %d.\n",
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
dev->name, vp->cur_tx);
/* vp->tx_full = 1; */
vp->tx_skbuff[entry] = skb;
@@ -1102,7 +1099,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
if (corkscrew_debug > 2)
- printk("%s: Tx error, status %2.2x.\n",
+ pr_debug("%s: Tx error, status %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x04)
dev->stats.tx_fifo_errors++;
@@ -1143,7 +1140,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
status = inw(ioaddr + EL3_STATUS);
if (corkscrew_debug > 4)
- printk("%s: interrupt, status %4.4x, timer %d.\n",
+ pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
dev->name, status, latency);
if ((status & 0xE000) != 0xE000) {
static int donedidthis;
@@ -1151,7 +1148,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
Ignore a single early interrupt, but don't hang the machine for
other interrupt problems. */
if (donedidthis++ > 100) {
- printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+ pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
dev->name, status, netif_running(dev));
free_irq(dev->irq, dev);
dev->irq = -1;
@@ -1160,14 +1157,14 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
do {
if (corkscrew_debug > 5)
- printk("%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & RxComplete)
corkscrew_rx(dev);
if (status & TxAvailable) {
if (corkscrew_debug > 5)
- printk(" TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
@@ -1212,19 +1209,19 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
if (status & StatsFull) { /* Empty statistics. */
static int DoneDidThat;
if (corkscrew_debug > 4)
- printk("%s: Updating stats.\n", dev->name);
+ pr_debug("%s: Updating stats.\n", dev->name);
update_stats(ioaddr, dev);
/* DEBUG HACK: Disable statistics as an interrupt source. */
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
int win, reg;
- printk("%s: Updating stats failed, disabling stats as an"
+ pr_notice("%s: Updating stats failed, disabling stats as an"
" interrupt source.\n", dev->name);
for (win = 0; win < 8; win++) {
EL3WINDOW(win);
- printk("\n Vortex window %d:", win);
+ pr_notice("\n Vortex window %d:", win);
for (reg = 0; reg < 16; reg++)
- printk(" %2.2x", inb(ioaddr + reg));
+ pr_notice(" %2.2x", inb(ioaddr + reg));
}
EL3WINDOW(7);
outw(SetIntrEnb | TxAvailable |
@@ -1246,7 +1243,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
}
if (--i < 0) {
- printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x. "
+ pr_err("%s: Too much work in interrupt, status %4.4x. "
"Disabling functions (%4.4x).\n", dev->name,
status, SetStatusEnb | ((~status) & 0x7FE));
/* Disable all pending interrupts. */
@@ -1262,7 +1259,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
spin_unlock(&lp->lock);
if (corkscrew_debug > 4)
- printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+ pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
return IRQ_HANDLED;
}
@@ -1273,13 +1270,13 @@ static int corkscrew_rx(struct net_device *dev)
short rx_status;
if (corkscrew_debug > 5)
- printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
unsigned char rx_error = inb(ioaddr + RxErrors);
if (corkscrew_debug > 2)
- printk(" Rx error: status %2.2x.\n",
+ pr_debug(" Rx error: status %2.2x.\n",
rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01)
@@ -1299,7 +1296,7 @@ static int corkscrew_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len + 5 + 2);
if (corkscrew_debug > 4)
- printk("Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
@@ -1318,7 +1315,7 @@ static int corkscrew_rx(struct net_device *dev)
break;
continue;
} else if (corkscrew_debug)
- printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+ pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
}
outw(RxDiscard, ioaddr + EL3_CMD);
dev->stats.rx_dropped++;
@@ -1338,13 +1335,13 @@ static int boomerang_rx(struct net_device *dev)
int rx_status;
if (corkscrew_debug > 5)
- printk(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
if (rx_status & RxDError) { /* Error, update stats. */
unsigned char rx_error = rx_status >> 16;
if (corkscrew_debug > 2)
- printk(" Rx error: status %2.2x.\n",
+ pr_debug(" Rx error: status %2.2x.\n",
rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01)
@@ -1364,7 +1361,7 @@ static int boomerang_rx(struct net_device *dev)
dev->stats.rx_bytes += pkt_len;
if (corkscrew_debug > 4)
- printk("Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
/* Check if the packet is long enough to just accept without
@@ -1385,7 +1382,7 @@ static int boomerang_rx(struct net_device *dev)
temp = skb_put(skb, pkt_len);
/* Remove this checking code for final release. */
if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
- printk("%s: Warning -- the skbuff addresses do not match"
+ pr_warning("%s: Warning -- the skbuff addresses do not match"
" in boomerang_rx: %p vs. %p / %p.\n",
dev->name,
isa_bus_to_virt(vp->
@@ -1427,10 +1424,10 @@ static int corkscrew_close(struct net_device *dev)
netif_stop_queue(dev);
if (corkscrew_debug > 1) {
- printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+ pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
dev->name, inw(ioaddr + EL3_STATUS),
inb(ioaddr + TxStatus));
- printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
+ pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
" tx_queued %d.\n", dev->name, rx_nocopy, rx_copy,
queued_packet);
}
@@ -1534,7 +1531,7 @@ static void set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
if (corkscrew_debug > 3)
- printk("%s: Setting promiscuous mode.\n",
+ pr_debug("%s: Setting promiscuous mode.\n",
dev->name);
new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 8f734d7..b3cfb2f 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -176,7 +176,7 @@ sizeof(nop_cmd) = 8;
if(!p->scb->cmd) break; \
DELAY_16(); \
if(i == 1023) { \
- printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\
+ pr_warning("%s:%d: scb_cmd timed out .. resetting i82586\n",\
dev->name,__LINE__); \
elmc_id_reset586(); } } }
@@ -291,7 +291,7 @@ static int elmc_open(struct net_device *dev)
ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
dev->name, dev);
if (ret) {
- printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
+ pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq);
elmc_id_reset586();
return ret;
}
@@ -371,9 +371,9 @@ static void alloc586(struct net_device *dev)
DELAY(2);
- if (p->iscp->busy) {
- printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
- }
+ if (p->iscp->busy)
+ pr_err("%s: Init-Problems (alloc).\n", dev->name);
+
memset((char *) p->scb, 0, sizeof(struct scb_struct));
}
@@ -470,7 +470,7 @@ static int __init do_elmc_probe(struct net_device *dev)
mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev);
/* if we get this far, adapter has been found - carry on */
- printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
+ pr_info("%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
/* Now we extract configuration info from the card.
The 3c523 provides information in two of the POS registers, but
@@ -507,7 +507,7 @@ static int __init do_elmc_probe(struct net_device *dev)
memset(pr, 0, sizeof(struct priv));
pr->slot = slot;
- printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
+ pr_info("%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
dev->base_addr);
/* Determine if we're using the on-board transceiver (i.e. coax) or
@@ -529,7 +529,7 @@ static int __init do_elmc_probe(struct net_device *dev)
size = 0x4000; /* check for 16K mem */
if (!check586(dev, dev->mem_start, size)) {
- printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
+ pr_err("%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
dev->mem_start);
retval = -ENODEV;
goto err_out;
@@ -546,7 +546,7 @@ static int __init do_elmc_probe(struct net_device *dev)
pr->num_recv_buffs = NUM_RECV_BUFFS_16;
/* dump all the assorted information */
- printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
+ pr_info("%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
dev->irq, dev->if_port ? "ex" : "in",
dev->mem_start, dev->mem_end - 1);
@@ -555,7 +555,7 @@ static int __init do_elmc_probe(struct net_device *dev)
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(dev->base_addr + i);
- printk(KERN_INFO "%s: hardware address %pM\n",
+ pr_info("%s: hardware address %pM\n",
dev->name, dev->dev_addr);
dev->netdev_ops = &netdev_ops;
@@ -660,7 +660,7 @@ static int init586(struct net_device *dev)
}
if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) {
- printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
+ pr_warning("%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
return 1;
}
/*
@@ -686,7 +686,7 @@ static int init586(struct net_device *dev)
}
if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) {
- printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status);
+ pr_warning("%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status);
return 1;
}
/*
@@ -707,7 +707,7 @@ static int init586(struct net_device *dev)
s = jiffies;
while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
if (time_after(jiffies, s + 30*HZ/100)) {
- printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
+ pr_warning("%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
result = 1;
break;
}
@@ -723,14 +723,14 @@ static int init586(struct net_device *dev)
if (result & TDR_LNK_OK) {
/* empty */
} else if (result & TDR_XCVR_PRB) {
- printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name);
+ pr_warning("%s: TDR: Transceiver problem!\n", dev->name);
} else if (result & TDR_ET_OPN) {
- printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+ pr_warning("%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
} else if (result & TDR_ET_SRT) {
if (result & TDR_TIMEMASK) /* time == 0 -> strange :-) */
- printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+ pr_warning("%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
} else {
- printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result);
+ pr_warning("%s: TDR: Unknown status %04x\n", dev->name, result);
}
}
/*
@@ -774,11 +774,11 @@ static int init586(struct net_device *dev)
/* I don't understand this: do we really need memory after the init? */
int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
if (len <= 0) {
- printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name);
+ pr_err("%s: Ooooops, no memory for MC-Setup!\n", dev->name);
} else {
if (len < num_addrs) {
num_addrs = len;
- printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n",
+ pr_warning("%s: Sorry, can only apply %d MC-Address(es).\n",
dev->name, num_addrs);
}
mc_cmd = (struct mcsetup_cmd_struct *) ptr;
@@ -799,7 +799,7 @@ static int init586(struct net_device *dev)
break;
}
if (!(mc_cmd->cmd_status & STAT_COMPL)) {
- printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name);
+ pr_warning("%s: Can't apply multicast-address-list.\n", dev->name);
}
}
}
@@ -812,7 +812,7 @@ static int init586(struct net_device *dev)
p->xmit_buffs[i] = (struct tbd_struct *) ptr; /* TBD */
ptr = (char *) ptr + sizeof(struct tbd_struct);
if ((void *) ptr > (void *) p->iscp) {
- printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name);
+ pr_err("%s: not enough shared-mem for your configuration!\n", dev->name);
return 1;
}
memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct));
@@ -936,7 +936,7 @@ elmc_interrupt(int irq, void *dev_id)
if (stat & STAT_CNA) {
/* CU went 'not ready' */
if (netif_running(dev)) {
- printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+ pr_warning("%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
}
}
#endif
@@ -951,7 +951,7 @@ elmc_interrupt(int irq, void *dev_id)
p->scb->cmd = RUC_RESUME;
elmc_attn586();
} else {
- printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+ pr_warning("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
elmc_rnr_int(dev);
}
}
@@ -995,11 +995,11 @@ static void elmc_rcv_int(struct net_device *dev)
dev->stats.rx_dropped++;
}
} else {
- printk(KERN_WARNING "%s: received oversized frame.\n", dev->name);
+ pr_warning("%s: received oversized frame.\n", dev->name);
dev->stats.rx_dropped++;
}
} else { /* frame !(ok), only with 'save-bad-frames' */
- printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status);
+ pr_warning("%s: oops! rfd-error-status: %04x\n", dev->name, status);
dev->stats.rx_errors++;
}
p->rfd_top->status = 0;
@@ -1028,7 +1028,7 @@ static void elmc_rnr_int(struct net_device *dev)
alloc_rfa(dev, (char *) p->rfd_first);
startrecv586(dev); /* restart RU */
- printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
+ pr_warning("%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
}
@@ -1043,7 +1043,7 @@ static void elmc_xmt_int(struct net_device *dev)
status = p->xmit_cmds[p->xmit_last]->cmd_status;
if (!(status & STAT_COMPL)) {
- printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
+ pr_warning("%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
}
if (status & STAT_OK) {
dev->stats.tx_packets++;
@@ -1051,18 +1051,18 @@ static void elmc_xmt_int(struct net_device *dev)
} else {
dev->stats.tx_errors++;
if (status & TCMD_LATECOLL) {
- printk(KERN_WARNING "%s: late collision detected.\n", dev->name);
+ pr_warning("%s: late collision detected.\n", dev->name);
dev->stats.collisions++;
} else if (status & TCMD_NOCARRIER) {
dev->stats.tx_carrier_errors++;
- printk(KERN_WARNING "%s: no carrier detected.\n", dev->name);
+ pr_warning("%s: no carrier detected.\n", dev->name);
} else if (status & TCMD_LOSTCTS) {
- printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name);
+ pr_warning("%s: loss of CTS detected.\n", dev->name);
} else if (status & TCMD_UNDERRUN) {
dev->stats.tx_fifo_errors++;
- printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name);
+ pr_warning("%s: DMA underrun detected.\n", dev->name);
} else if (status & TCMD_MAXCOLL) {
- printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name);
+ pr_warning("%s: Max. collisions exceeded.\n", dev->name);
dev->stats.collisions += 16;
}
}
@@ -1099,10 +1099,11 @@ static void elmc_timeout(struct net_device *dev)
struct priv *p = netdev_priv(dev);
/* COMMAND-UNIT active? */
if (p->scb->status & CU_ACTIVE) {
-#ifdef DEBUG
- printk("%s: strange ... timeout with CU active?!?\n", dev->name);
- printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point);
-#endif
+ pr_debug("%s: strange ... timeout with CU active?!?\n", dev->name);
+ pr_debug("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name,
+ (int)p->xmit_cmds[0]->cmd_status,
+ (int)p->nop_cmds[0]->cmd_status,
+ (int)p->nop_cmds[1]->cmd_status, (int)p->nop_point);
p->scb->cmd = CUC_ABORT;
elmc_attn586();
WAIT_4_SCB_CMD();
@@ -1112,10 +1113,8 @@ static void elmc_timeout(struct net_device *dev)
WAIT_4_SCB_CMD();
netif_wake_queue(dev);
} else {
-#ifdef DEBUG
- printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status);
- printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
-#endif
+ pr_debug("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status);
+ pr_debug("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
elmc_close(dev);
elmc_open(dev);
}
@@ -1162,7 +1161,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
break;
}
if (i == 15) {
- printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
+ pr_warning("%s: Can't start transmit-command.\n", dev->name);
}
}
#else
@@ -1287,11 +1286,12 @@ int __init init_module(void)
free_netdev(dev);
if (io[this_dev]==0)
break;
- printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
+ pr_warning("3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
}
if(found==0) {
- if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n");
+ if (io[0]==0)
+ pr_notice("3c523.c: No 3c523 cards found\n");
return -ENXIO;
} else return 0;
}
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index b61073c..d93eb70 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -125,8 +125,6 @@ static const char* cardname = DRV_NAME;
#define NET_DEBUG 2
#endif
-#undef DEBUG_IRQ
-
static unsigned int mc32_debug = NET_DEBUG;
/* The number of low I/O ports used by the ethercard. */
@@ -351,15 +349,15 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
/* Time to play MCA games */
if (mc32_debug && version_printed++ == 0)
- printk(KERN_DEBUG "%s", version);
+ pr_debug("%s", version);
- printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot);
+ pr_info("%s: %s found in slot %d:", dev->name, cardname, slot);
POS = mca_read_stored_pos(slot, 2);
if(!(POS&1))
{
- printk(" disabled.\n");
+ pr_info(" disabled.\n");
return -ENODEV;
}
@@ -370,7 +368,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
POS = mca_read_stored_pos(slot, 4);
if(!(POS&1))
{
- printk("memory window disabled.\n");
+ pr_info("memory window disabled.\n");
return -ENODEV;
}
@@ -379,7 +377,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
i=(POS>>4)&3;
if(i==3)
{
- printk("invalid memory window.\n");
+ pr_info("invalid memory window.\n");
return -ENODEV;
}
@@ -392,11 +390,11 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname))
{
- printk("io 0x%3lX, which is busy.\n", dev->base_addr);
+ pr_info("io 0x%3lX, which is busy.\n", dev->base_addr);
return -EBUSY;
}
- printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
+ pr_info("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
dev->base_addr, dev->irq, dev->mem_start, i/1024);
@@ -416,7 +414,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
dev->dev_addr[i] = mca_read_pos(slot,3);
}
- printk("%s: Address %pM", dev->name, dev->dev_addr);
+ pr_info("%s: Address %pM", dev->name, dev->dev_addr);
mca_write_pos(slot, 6, 0);
mca_write_pos(slot, 7, 0);
@@ -424,9 +422,9 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
POS = mca_read_stored_pos(slot, 4);
if(POS&2)
- printk(" : BNC port selected.\n");
+ pr_info(" : BNC port selected.\n");
else
- printk(" : AUI port selected.\n");
+ pr_info(" : AUI port selected.\n");
POS=inb(dev->base_addr+HOST_CTRL);
POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET;
@@ -447,7 +445,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
if (err) {
release_region(dev->base_addr, MC32_IO_EXTENT);
- printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
+ pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
goto err_exit_ports;
}
@@ -463,7 +461,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
i++;
if(i == 1000)
{
- printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name);
+ pr_err("%s: failed to boot adapter.\n", dev->name);
err = -ENODEV;
goto err_exit_irq;
}
@@ -475,10 +473,10 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
if(base>0)
{
if(base < 0x0C)
- printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1],
+ pr_err("%s: %s%s.\n", dev->name, failures[base-1],
base<0x0A?" test failure":"");
else
- printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base);
+ pr_err("%s: unknown failure %d.\n", dev->name, base);
err = -ENODEV;
goto err_exit_irq;
}
@@ -494,7 +492,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
udelay(50);
if(n>100)
{
- printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i);
+ pr_err("%s: mailbox read fail (%d).\n", dev->name, i);
err = -ENODEV;
goto err_exit_irq;
}
@@ -527,7 +525,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
init_completion(&lp->execution_cmd);
init_completion(&lp->xceiver_cmd);
- printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
+ pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
dev->netdev_ops = &netdev_ops;
@@ -939,7 +937,7 @@ static int mc32_open(struct net_device *dev)
*/
if(mc32_command(dev, 8, descnumbuffs, 4)) {
- printk("%s: %s rejected our buffer configuration!\n",
+ pr_info("%s: %s rejected our buffer configuration!\n",
dev->name, cardname);
mc32_close(dev);
return -ENOBUFS;
@@ -995,7 +993,7 @@ static int mc32_open(struct net_device *dev)
static void mc32_timeout(struct net_device *dev)
{
- printk(KERN_WARNING "%s: transmit timed out?\n", dev->name);
+ pr_warning("%s: transmit timed out?\n", dev->name);
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
@@ -1335,11 +1333,9 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
{
status=inb(ioaddr+HOST_CMD);
-#ifdef DEBUG_IRQ
- printk("Status TX%d RX%d EX%d OV%d BC%d\n",
+ pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n",
(status&7), (status>>3)&7, (status>>6)&1,
(status>>7)&1, boguscount);
-#endif
switch(status&7)
{
@@ -1354,7 +1350,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
complete(&lp->xceiver_cmd);
break;
default:
- printk("%s: strange tx ack %d\n", dev->name, status&7);
+ pr_notice("%s: strange tx ack %d\n", dev->name, status&7);
}
status>>=3;
switch(status&7)
@@ -1376,7 +1372,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
mc32_start_transceiver(dev);
break;
default:
- printk("%s: strange rx ack %d\n",
+ pr_notice("%s: strange rx ack %d\n",
dev->name, status&7);
}
status>>=3;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c566984..89a8c92 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -828,14 +828,14 @@ static int vortex_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_WARNING "%s: Could not enable device \n",
+ pr_warning("%s: Could not enable device \n",
dev->name);
return err;
}
pci_set_master(pdev);
if (request_irq(dev->irq, vp->full_bus_master_rx ?
&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
- printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+ pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
pci_disable_device(pdev);
return -EBUSY;
}
@@ -894,7 +894,7 @@ static int __devexit vortex_eisa_remove(struct device *device)
dev = eisa_get_drvdata(edev);
if (!dev) {
- printk("vortex_eisa_remove called for Compaq device!\n");
+ pr_err("vortex_eisa_remove called for Compaq device!\n");
BUG();
}
@@ -1051,7 +1051,7 @@ static int __devinit vortex_probe1(struct device *gendev,
struct eisa_device *edev = NULL;
if (!printed_version) {
- printk (version);
+ pr_info("%s", version);
printed_version = 1;
}
@@ -1068,7 +1068,7 @@ static int __devinit vortex_probe1(struct device *gendev,
dev = alloc_etherdev(sizeof(*vp));
retval = -ENOMEM;
if (!dev) {
- printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n");
+ pr_err(PFX "unable to allocate etherdev, aborting\n");
goto out;
}
SET_NETDEV_DEV(dev, gendev);
@@ -1100,9 +1100,9 @@ static int __devinit vortex_probe1(struct device *gendev,
print_info = (vortex_debug > 1);
if (print_info)
- printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
+ pr_info("See Documentation/networking/vortex.txt\n");
- printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
+ pr_info("%s: 3Com %s %s at %p.\n",
print_name,
pdev ? "PCI" : "EISA",
vci->name,
@@ -1144,7 +1144,7 @@ static int __devinit vortex_probe1(struct device *gendev,
chip only. */
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < new_latency) {
- printk(KERN_INFO "%s: Overriding PCI latency"
+ pr_info("%s: Overriding PCI latency"
" timer (CFLT) setting of %d, new value is %d.\n",
print_name, pci_latency, new_latency);
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
@@ -1236,17 +1236,17 @@ static int __devinit vortex_probe1(struct device *gendev,
checksum = (checksum ^ (checksum >> 8)) & 0xff;
}
if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
- printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ pr_err(" ***INVALID CHECKSUM %4.4x*** ", checksum);
for (i = 0; i < 3; i++)
((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
if (print_info)
- printk(" %pM", dev->dev_addr);
+ pr_info(" %pM", dev->dev_addr);
/* Unfortunately an all zero eeprom passes the checksum and this
gets found in the wild in failure cases. Crypto is hard 8) */
if (!is_valid_ether_addr(dev->dev_addr)) {
retval = -EINVAL;
- printk(KERN_ERR "*** EEPROM MAC address is invalid.\n");
+ pr_err("*** EEPROM MAC address is invalid.\n");
goto free_ring; /* With every pack */
}
EL3WINDOW(2);
@@ -1254,16 +1254,16 @@ static int __devinit vortex_probe1(struct device *gendev,
iowrite8(dev->dev_addr[i], ioaddr + i);
if (print_info)
- printk(", IRQ %d\n", dev->irq);
+ pr_info(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= nr_irqs)
- printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
+ pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
EL3WINDOW(4);
step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
if (print_info) {
- printk(KERN_INFO " product code %02x%02x rev %02x.%d date %02d-"
+ pr_info(" product code %02x%02x rev %02x.%d date %02d-"
"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
}
@@ -1279,7 +1279,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
if (print_info) {
- printk(KERN_INFO "%s: CardBus functions mapped "
+ pr_info("%s: CardBus functions mapped "
"%16.16llx->%p\n",
print_name,
(unsigned long long)pci_resource_start(pdev, 2),
@@ -1307,7 +1307,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (vp->info1 & 0x8000) {
vp->full_duplex = 1;
if (print_info)
- printk(KERN_INFO "Full duplex capable\n");
+ pr_info("Full duplex capable\n");
}
{
@@ -1319,9 +1319,9 @@ static int __devinit vortex_probe1(struct device *gendev,
vp->available_media = 0x40;
config = ioread32(ioaddr + Wn3_Config);
if (print_info) {
- printk(KERN_DEBUG " Internal config register is %4.4x, "
+ pr_debug(" Internal config register is %4.4x, "
"transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
- printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
8 << RAM_SIZE(config),
RAM_WIDTH(config) ? "word" : "byte",
ram_split[RAM_SPLIT(config)],
@@ -1336,7 +1336,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
if (vp->media_override != 7) {
- printk(KERN_INFO "%s: Media override to transceiver type %d (%s).\n",
+ pr_info("%s: Media override to transceiver type %d (%s).\n",
print_name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
@@ -1369,7 +1369,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (mii_status && mii_status != 0xffff) {
vp->phys[phy_idx++] = phyx;
if (print_info) {
- printk(KERN_INFO " MII transceiver found at address %d,"
+ pr_info(" MII transceiver found at address %d,"
" status %4x.\n", phyx, mii_status);
}
if ((mii_status & 0x0040) == 0)
@@ -1378,7 +1378,7 @@ static int __devinit vortex_probe1(struct device *gendev,
}
mii_preamble_required--;
if (phy_idx == 0) {
- printk(KERN_WARNING" ***WARNING*** No MII transceivers found!\n");
+ pr_warning(" ***WARNING*** No MII transceivers found!\n");
vp->phys[0] = 24;
} else {
vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
@@ -1394,7 +1394,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (vp->capabilities & CapBusMaster) {
vp->full_bus_master_tx = 1;
if (print_info) {
- printk(KERN_INFO " Enabling bus-master transmits and %s receives.\n",
+ pr_info(" Enabling bus-master transmits and %s receives.\n",
(vp->info2 & 1) ? "early" : "whole-frame" );
}
vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
@@ -1414,7 +1414,7 @@ static int __devinit vortex_probe1(struct device *gendev,
dev->netdev_ops = &vortex_netdev_ops;
if (print_info) {
- printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
+ pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
print_name,
(dev->features & NETIF_F_SG) ? "en":"dis",
(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
@@ -1442,7 +1442,7 @@ free_region:
if (vp->must_free_region)
release_region(dev->base_addr, vci->io_size);
free_netdev(dev);
- printk(KERN_ERR PFX "vortex_probe1 fails. Returns %d\n", retval);
+ pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);
out:
return retval;
}
@@ -1464,13 +1464,13 @@ issue_and_wait(struct net_device *dev, int cmd)
for (i = 0; i < 100000; i++) {
if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
if (vortex_debug > 1)
- printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
+ pr_info("%s: command 0x%04x took %d usecs\n",
dev->name, cmd, i * 10);
return;
}
udelay(10);
}
- printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
+ pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
}
@@ -1480,7 +1480,7 @@ vortex_set_duplex(struct net_device *dev)
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
- printk(KERN_INFO "%s: setting %s-duplex.\n",
+ pr_info("%s: setting %s-duplex.\n",
dev->name, (vp->full_duplex) ? "full" : "half");
EL3WINDOW(3);
@@ -1522,7 +1522,7 @@ vortex_up(struct net_device *dev)
pci_restore_state(VORTEX_PCI(vp));
err = pci_enable_device(VORTEX_PCI(vp));
if (err) {
- printk(KERN_WARNING "%s: Could not enable device \n",
+ pr_warning("%s: Could not enable device \n",
dev->name);
goto err_out;
}
@@ -1533,14 +1533,14 @@ vortex_up(struct net_device *dev)
config = ioread32(ioaddr + Wn3_Config);
if (vp->media_override != 7) {
- printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+ pr_info("%s: Media override to transceiver %d (%s).\n",
dev->name, vp->media_override,
media_tbl[vp->media_override].name);
dev->if_port = vp->media_override;
} else if (vp->autoselect) {
if (vp->has_nway) {
if (vortex_debug > 1)
- printk(KERN_INFO "%s: using NWAY device table, not %d\n",
+ pr_info("%s: using NWAY device table, not %d\n",
dev->name, dev->if_port);
dev->if_port = XCVR_NWAY;
} else {
@@ -1549,13 +1549,13 @@ vortex_up(struct net_device *dev)
while (! (vp->available_media & media_tbl[dev->if_port].mask))
dev->if_port = media_tbl[dev->if_port].next;
if (vortex_debug > 1)
- printk(KERN_INFO "%s: first available media type: %s\n",
+ pr_info("%s: first available media type: %s\n",
dev->name, media_tbl[dev->if_port].name);
}
} else {
dev->if_port = vp->default_media;
if (vortex_debug > 1)
- printk(KERN_INFO "%s: using default media %s\n",
+ pr_info("%s: using default media %s\n",
dev->name, media_tbl[dev->if_port].name);
}
@@ -1570,13 +1570,13 @@ vortex_up(struct net_device *dev)
vp->rx_oom_timer.function = rx_oom_timer;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Initial media type %s.\n",
+ pr_debug("%s: Initial media type %s.\n",
dev->name, media_tbl[dev->if_port].name);
vp->full_duplex = vp->mii.force_media;
config = BFINS(config, dev->if_port, 20, 4);
if (vortex_debug > 6)
- printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
+ pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
iowrite32(config, ioaddr + Wn3_Config);
if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
@@ -1602,7 +1602,7 @@ vortex_up(struct net_device *dev)
if (vortex_debug > 1) {
EL3WINDOW(4);
- printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
+ pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
}
@@ -1704,13 +1704,13 @@ vortex_open(struct net_device *dev)
/* Use the now-standard shared IRQ implementation. */
if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
- printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+ pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
goto err;
}
if (vp->full_bus_master_rx) { /* Boomerang bus master. */
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Filling in the Rx ring.\n", dev->name);
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
@@ -1728,7 +1728,7 @@ vortex_open(struct net_device *dev)
}
if (i != RX_RING_SIZE) {
int j;
- printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name);
+ pr_emerg("%s: no memory for rx ring\n", dev->name);
for (j = 0; j < i; j++) {
if (vp->rx_skbuff[j]) {
dev_kfree_skb(vp->rx_skbuff[j]);
@@ -1750,7 +1750,7 @@ err_free_irq:
free_irq(dev->irq, dev);
err:
if (vortex_debug > 1)
- printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval);
+ pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
out:
return retval;
}
@@ -1766,9 +1766,9 @@ vortex_timer(unsigned long data)
int media_status, old_window;
if (vortex_debug > 2) {
- printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
dev->name, media_tbl[dev->if_port].name);
- printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+ pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
}
disable_irq_lockdep(dev->irq);
@@ -1781,12 +1781,12 @@ vortex_timer(unsigned long data)
netif_carrier_on(dev);
ok = 1;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n",
+ pr_debug("%s: Media %s has link beat, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
} else {
netif_carrier_off(dev);
if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n",
+ pr_debug("%s: Media %s has no link beat, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
}
}
@@ -1802,7 +1802,7 @@ vortex_timer(unsigned long data)
break;
default: /* Other media types handled by Tx timeouts. */
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n",
+ pr_debug("%s: Media %s has no indication, %x.\n",
dev->name, media_tbl[dev->if_port].name, media_status);
ok = 1;
}
@@ -1822,12 +1822,12 @@ vortex_timer(unsigned long data)
if (dev->if_port == XCVR_Default) { /* Go back to default. */
dev->if_port = vp->default_media;
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media selection failing, using default "
+ pr_debug("%s: Media selection failing, using default "
"%s port.\n",
dev->name, media_tbl[dev->if_port].name);
} else {
if (vortex_debug > 1)
- printk(KERN_DEBUG "%s: Media selection failed, now trying "
+ pr_debug("%s: Media selection failed, now trying "
"%s port.\n",
dev->name, media_tbl[dev->if_port].name);
next_tick = media_tbl[dev->if_port].wait;
@@ -1843,13 +1843,13 @@ vortex_timer(unsigned long data)
iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
ioaddr + EL3_CMD);
if (vortex_debug > 1)
- printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
+ pr_debug("wrote 0x%08x to Wn3_Config\n", config);
/* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */
}
leave_media_alone:
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
+ pr_debug("%s: Media selection timer finished, %s.\n",
dev->name, media_tbl[dev->if_port].name);
EL3WINDOW(old_window);
@@ -1865,21 +1865,21 @@ static void vortex_tx_timeout(struct net_device *dev)
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
- printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
dev->name, ioread8(ioaddr + TxStatus),
ioread16(ioaddr + EL3_STATUS));
EL3WINDOW(4);
- printk(KERN_ERR " diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+ pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n",
ioread16(ioaddr + Wn4_NetDiag),
ioread16(ioaddr + Wn4_Media),
ioread32(ioaddr + PktStatus),
ioread16(ioaddr + Wn4_FIFODiag));
/* Slight code bloat to be user friendly. */
if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
- printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
+ pr_err("%s: Transmitter encountered 16 collisions --"
" network cable problem?\n", dev->name);
if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
- printk(KERN_ERR "%s: Interrupt posted but not delivered --"
+ pr_err("%s: Interrupt posted but not delivered --"
" IRQ blocked by another device?\n", dev->name);
/* Bad idea here.. but we might as well handle a few events. */
{
@@ -1903,7 +1903,7 @@ static void vortex_tx_timeout(struct net_device *dev)
dev->stats.tx_errors++;
if (vp->full_bus_master_tx) {
- printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
+ pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0)
iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
ioaddr + DownListPtr);
@@ -1938,7 +1938,7 @@ vortex_error(struct net_device *dev, int status)
unsigned char tx_status = 0;
if (vortex_debug > 2) {
- printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status);
+ pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
}
if (status & TxComplete) { /* Really "TxError" for us. */
@@ -1946,10 +1946,10 @@ vortex_error(struct net_device *dev, int status)
/* Presumably a tx-timeout. We must merely re-enable. */
if (vortex_debug > 2
|| (tx_status != 0x88 && vortex_debug > 0)) {
- printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n",
+ pr_err("%s: Transmit error, Tx status register %2.2x.\n",
dev->name, tx_status);
if (tx_status == 0x82) {
- printk(KERN_ERR "Probably a duplex mismatch. See "
+ pr_err("Probably a duplex mismatch. See "
"Documentation/networking/vortex.txt\n");
}
dump_tx_ring(dev);
@@ -1975,13 +1975,13 @@ vortex_error(struct net_device *dev, int status)
if (status & StatsFull) { /* Empty statistics. */
static int DoneDidThat;
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: Updating stats.\n", dev->name);
+ pr_debug("%s: Updating stats.\n", dev->name);
update_stats(ioaddr, dev);
/* HACK: Disable statistics as an interrupt source. */
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 &&
ioread16(ioaddr + EL3_STATUS) & StatsFull) {
- printk(KERN_WARNING "%s: Updating statistics failed, disabling "
+ pr_warning("%s: Updating statistics failed, disabling "
"stats as an interrupt source.\n", dev->name);
EL3WINDOW(5);
iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
@@ -1998,7 +1998,7 @@ vortex_error(struct net_device *dev, int status)
u16 fifo_diag;
EL3WINDOW(4);
fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
- printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
+ pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
dev->name, fifo_diag);
/* Adapter failure requires Tx/Rx reset and reinit. */
if (vp->full_bus_master_tx) {
@@ -2006,7 +2006,7 @@ vortex_error(struct net_device *dev, int status)
/* 0x80000000 PCI master abort. */
/* 0x40000000 PCI target abort. */
if (vortex_debug)
- printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+ pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
/* In this case, blow the card away */
/* Must not enter D3 or we can't legally issue the reset! */
@@ -2075,7 +2075,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) {
if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
if (vortex_debug > 2)
- printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
+ pr_debug("%s: Tx error, status %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
@@ -2101,14 +2101,14 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned long flags;
if (vortex_debug > 6) {
- printk(KERN_DEBUG "boomerang_start_xmit()\n");
- printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n",
+ pr_debug("boomerang_start_xmit()\n");
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
dev->name, vp->cur_tx);
}
if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
if (vortex_debug > 0)
- printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n",
+ pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
dev->name);
netif_stop_queue(dev);
return 1;
@@ -2204,7 +2204,7 @@ vortex_interrupt(int irq, void *dev_id)
status = ioread16(ioaddr + EL3_STATUS);
if (vortex_debug > 6)
- printk("vortex_interrupt(). status=0x%4x\n", status);
+ pr_debug("vortex_interrupt(). status=0x%4x\n", status);
if ((status & IntLatch) == 0)
goto handler_exit; /* No interrupt: shared IRQs cause this */
@@ -2219,19 +2219,19 @@ vortex_interrupt(int irq, void *dev_id)
goto handler_exit;
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
dev->name, status, ioread8(ioaddr + Timer));
do {
if (vortex_debug > 5)
- printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & RxComplete)
vortex_rx(dev);
if (status & TxAvailable) {
if (vortex_debug > 5)
- printk(KERN_DEBUG " TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue (dev);
@@ -2263,7 +2263,7 @@ vortex_interrupt(int irq, void *dev_id)
}
if (--work_done < 0) {
- printk(KERN_WARNING "%s: Too much work in interrupt, status "
+ pr_warning("%s: Too much work in interrupt, status "
"%4.4x.\n", dev->name, status);
/* Disable all pending interrupts. */
do {
@@ -2281,7 +2281,7 @@ vortex_interrupt(int irq, void *dev_id)
} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, status);
handler_exit:
spin_unlock(&vp->lock);
@@ -2313,14 +2313,14 @@ boomerang_interrupt(int irq, void *dev_id)
status = ioread16(ioaddr + EL3_STATUS);
if (vortex_debug > 6)
- printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
+ pr_debug("boomerang_interrupt. status=0x%4x\n", status);
if ((status & IntLatch) == 0)
goto handler_exit; /* No interrupt: shared IRQs can cause this */
if (status == 0xffff) { /* h/w no longer present (hotplug)? */
if (vortex_debug > 1)
- printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n");
+ pr_debug("boomerang_interrupt(1): status = 0xffff\n");
goto handler_exit;
}
@@ -2330,16 +2330,16 @@ boomerang_interrupt(int irq, void *dev_id)
}
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
dev->name, status, ioread8(ioaddr + Timer));
do {
if (vortex_debug > 5)
- printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
dev->name, status);
if (status & UpComplete) {
iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
if (vortex_debug > 5)
- printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
+ pr_debug("boomerang_interrupt->boomerang_rx\n");
boomerang_rx(dev);
}
@@ -2374,7 +2374,7 @@ boomerang_interrupt(int irq, void *dev_id)
dev_kfree_skb_irq(skb);
vp->tx_skbuff[entry] = NULL;
} else {
- printk(KERN_DEBUG "boomerang_interrupt: no skb!\n");
+ pr_debug("boomerang_interrupt: no skb!\n");
}
/* dev->stats.tx_packets++; Counted below. */
dirty_tx++;
@@ -2382,7 +2382,7 @@ boomerang_interrupt(int irq, void *dev_id)
vp->dirty_tx = dirty_tx;
if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
if (vortex_debug > 6)
- printk(KERN_DEBUG "boomerang_interrupt: wake queue\n");
+ pr_debug("boomerang_interrupt: wake queue\n");
netif_wake_queue (dev);
}
}
@@ -2392,7 +2392,7 @@ boomerang_interrupt(int irq, void *dev_id)
vortex_error(dev, status);
if (--work_done < 0) {
- printk(KERN_WARNING "%s: Too much work in interrupt, status "
+ pr_warning("%s: Too much work in interrupt, status "
"%4.4x.\n", dev->name, status);
/* Disable all pending interrupts. */
do {
@@ -2413,7 +2413,7 @@ boomerang_interrupt(int irq, void *dev_id)
} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
if (vortex_debug > 4)
- printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, status);
handler_exit:
spin_unlock(&vp->lock);
@@ -2428,13 +2428,13 @@ static int vortex_rx(struct net_device *dev)
short rx_status;
if (vortex_debug > 5)
- printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+ pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
unsigned char rx_error = ioread8(ioaddr + RxErrors);
if (vortex_debug > 2)
- printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01) dev->stats.rx_over_errors++;
if (rx_error & 0x02) dev->stats.rx_length_errors++;
@@ -2448,7 +2448,7 @@ static int vortex_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len + 5);
if (vortex_debug > 4)
- printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
@@ -2478,7 +2478,7 @@ static int vortex_rx(struct net_device *dev)
break;
continue;
} else if (vortex_debug > 0)
- printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
+ pr_notice("%s: No memory to allocate a sk_buff of "
"size %d.\n", dev->name, pkt_len);
dev->stats.rx_dropped++;
}
@@ -2498,7 +2498,7 @@ boomerang_rx(struct net_device *dev)
int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
if (vortex_debug > 5)
- printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+ pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
if (--rx_work_limit < 0)
@@ -2506,7 +2506,7 @@ boomerang_rx(struct net_device *dev)
if (rx_status & RxDError) { /* Error, update stats. */
unsigned char rx_error = rx_status >> 16;
if (vortex_debug > 2)
- printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
dev->stats.rx_errors++;
if (rx_error & 0x01) dev->stats.rx_over_errors++;
if (rx_error & 0x02) dev->stats.rx_length_errors++;
@@ -2520,7 +2520,7 @@ boomerang_rx(struct net_device *dev)
dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
if (vortex_debug > 4)
- printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+ pr_debug("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
/* Check if the packet is long enough to just accept without
@@ -2566,7 +2566,7 @@ boomerang_rx(struct net_device *dev)
if (skb == NULL) {
static unsigned long last_jif;
if (time_after(jiffies, last_jif + 10 * HZ)) {
- printk(KERN_WARNING "%s: memory shortage\n", dev->name);
+ pr_warning("%s: memory shortage\n", dev->name);
last_jif = jiffies;
}
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
@@ -2598,7 +2598,7 @@ rx_oom_timer(unsigned long arg)
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */
boomerang_rx(dev);
if (vortex_debug > 1) {
- printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name,
+ pr_debug("%s: rx_oom_timer %s\n", dev->name,
((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying");
}
spin_unlock_irq(&vp->lock);
@@ -2655,9 +2655,9 @@ vortex_close(struct net_device *dev)
vortex_down(dev, 1);
if (vortex_debug > 1) {
- printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+ pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
- printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
+ pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
" tx_queued %d Rx pre-checksummed %d.\n",
dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
}
@@ -2666,7 +2666,7 @@ vortex_close(struct net_device *dev)
if (vp->rx_csumhits &&
(vp->drv_flags & HAS_HWCKSM) == 0 &&
(vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
- printk(KERN_WARNING "%s supports hardware checksums, and we're "
+ pr_warning("%s supports hardware checksums, and we're "
"not using them!\n", dev->name);
}
#endif
@@ -2717,16 +2717,16 @@ dump_tx_ring(struct net_device *dev)
int i;
int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */
- printk(KERN_ERR " Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+ pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
vp->full_bus_master_tx,
vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
- printk(KERN_ERR " Transmit list %8.8x vs. %p.\n",
+ pr_err(" Transmit list %8.8x vs. %p.\n",
ioread32(ioaddr + DownListPtr),
&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
issue_and_wait(dev, DownStall);
for (i = 0; i < TX_RING_SIZE; i++) {
- printk(KERN_ERR " %d: @%p length %8.8x status %8.8x\n", i,
+ pr_err(" %d: @%p length %8.8x status %8.8x\n", i,
&vp->tx_ring[i],
#if DO_ZEROCOPY
le32_to_cpu(vp->tx_ring[i].frag[0].length),
@@ -2970,7 +2970,7 @@ static void set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
if (vortex_debug > 3)
- printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
+ pr_notice("%s: Setting promiscuous mode.\n", dev->name);
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
@@ -3145,7 +3145,7 @@ static void acpi_set_WOL(struct net_device *dev)
iowrite16(RxEnable, ioaddr + EL3_CMD);
if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
- printk(KERN_INFO "%s: WOL not supported.\n",
+ pr_info("%s: WOL not supported.\n",
pci_name(VORTEX_PCI(vp)));
vp->enable_wol = 0;
@@ -3164,7 +3164,7 @@ static void __devexit vortex_remove_one(struct pci_dev *pdev)
struct vortex_private *vp;
if (!dev) {
- printk("vortex_remove_one called for Compaq device!\n");
+ pr_err("vortex_remove_one called for Compaq device!\n");
BUG();
}
--
1.6.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists