netdev - [PATCH] ieee1394: eth1394: use "firewire%d" instead of "eth%d" as interface name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <tkrat.21c425cc195510c9@s5r6.in-berlin.de>
Date:	Thu, 21 May 2009 15:29:10 +0200 (CEST)
From:	Stefan Richter <stefanr@...6.in-berlin.de>
To:	linux1394-devel@...ts.sourceforge.net
cc:	linux-hotplug@...r.kernel.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org, Jay Fenlason <fenlason@...hat.com>
Subject: [PATCH] ieee1394: eth1394: use "firewire%d" instead of "eth%d" as
 interface name

Change the initial name of IP-over-1394 networking interfaces from
"eth[0-9]+" to "firewire[0-9]+".

This should have been done years ago for the reason mentioned in the
inline comment.  The naming issue basically prevented acceptance of
IP networking over 1394 on Linux.

The future IP-over1394 driver in the newer alternative firewire driver
stack will use the "firewire%d" format from the start while "eth%d" will
no longer be used in the new driver.

Necessary changes in userland:

People who use the eth1394 driver either have to update their network
configuration (or instead perhaps respecpective udev interface renaming
rules) to the new names, or add

    options eth1394 firewire_interface_name=N

to /etc/modprobe.conf or /etc/modprobe.d/whatever if they really prefer
the old names.

Signed-off-by: Stefan Richter <stefanr@...6.in-berlin.de>
---
 drivers/ieee1394/eth1394.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

Index: linux/drivers/ieee1394/eth1394.c
===================================================================
--- linux.orig/drivers/ieee1394/eth1394.c
+++ linux/drivers/ieee1394/eth1394.c
@@ -146,6 +146,25 @@ MODULE_DESCRIPTION("IEEE 1394 IPv4 Drive
 MODULE_LICENSE("GPL");
 
 /*
+ * Legacy option:  Choose between "eth%d" (old) and "firewire%d" (new, default)
+ * as name template of eth1304's networking interfaces.
+ *
+ * eth1394 used to set "eth[0-9]+" as the initial name of an IP-over-1394
+ * networking interface.  This caused trouble for users and admins since
+ * it is indistinguishable from Ethernet drivers' interfaces.
+ *
+ * From Linux 2.6.31 on, "eth[0-9]+" remains only an option which can be
+ * activated by setting the following module parameter to N.  The default
+ * name format is "firewire[0-9]+" now.  This way, people will immediately
+ * recognize what kind of networking interface this is, and no mix-ups
+ * with Ethernet interface configurations will happen anymore.
+ */
+static int firewire_interface_name = 1;
+module_param(firewire_interface_name, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(firewire_interface_name, "use 'firewire' (= Y, default) or "
+		 "'eth' (= N, legacy option) as name prefix of interfaces");
+
+/*
  * The max_partial_datagrams parameter is the maximum number of fragmented
  * datagrams per node that eth1394 will keep in memory.  Providing an upper
  * bound allows us to limit the amount of memory that partial datagrams
@@ -595,7 +614,9 @@ static void ether1394_add_host(struct hp
 		return;
 	}
 
-	dev = alloc_netdev(sizeof(*priv), "eth%d", ether1394_init_dev);
+	dev = alloc_netdev(sizeof(*priv),
+			   firewire_interface_name ? "firewire%d" : "eth%d",
+			   ether1394_init_dev);
 	if (dev == NULL) {
 		ETH1394_PRINT_G(KERN_ERR, "Out of memory\n");
 		goto out;

-- 
Stefan Richter
-=====-==--= -=-= =-=-=
http://arcgraph.de/sr/

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html