| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.GSO.4.10.10906160521210.13320-100000@guinness>
Date: Tue, 16 Jun 2009 05:26:09 -0400 (EDT)
From: Sivakumar Subramani <Sivakumar.Subramani@...erion.com>
To: netdev@...r.kernel.org, davem@...emloft.net
cc: support@...erion.com, sivakumar.subramani@...erion.com,
santosh.rastapur@...erion.com, ram.vepa@...erion.com
Subject: [PATCH net-next-2.6] vxge: Enable SRIOV support in the driver.
- Enabled SRIOV support in the driver.
- Call __vxge_hw_verify_pci_e_info() for the PF only. This function
verifies the negotiated link width and current link speed in the
Link Status Register (offset 12h) which are reserved fields for VFs
as per the SRIOV specification, section 3.5.8.
Signed-off-by: Sivakumar Subramani <sivakumar.subramani@...erion.com>
Signed-off-by: Rastapur Santosh <santosh.rastapur@...erion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@...erion.com>
---
diff -urpN org/drivers/net/vxge/vxge-config.c mod/drivers/net/vxge/vxge-config.c
--- org/drivers/net/vxge/vxge-config.c 2009-06-15 22:51:49.000000000 -0700
+++ mod/drivers/net/vxge/vxge-config.c 2009-06-15 22:55:59.000000000 -0700
@@ -454,7 +454,7 @@ __vxge_hw_verify_pci_e_info(struct __vxg
return VXGE_HW_OK;
}
-static enum vxge_hw_status
+enum vxge_hw_status
__vxge_hw_device_is_privilaged(struct __vxge_hw_device *hldev)
{
if ((hldev->host_type == VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION ||
@@ -676,10 +676,12 @@ enum vxge_hw_status __vxge_hw_device_ini
{
enum vxge_hw_status status = VXGE_HW_OK;
- /* Validate the pci-e link width and speed */
- status = __vxge_hw_verify_pci_e_info(hldev);
- if (status != VXGE_HW_OK)
- goto exit;
+ if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev)) {
+ /* Validate the pci-e link width and speed */
+ status = __vxge_hw_verify_pci_e_info(hldev);
+ if (status != VXGE_HW_OK)
+ goto exit;
+ }
vxge_hw_wrr_rebalance(hldev);
exit:
diff -urpN org/drivers/net/vxge/vxge-main.c mod/drivers/net/vxge/vxge-main.c
--- org/drivers/net/vxge/vxge-main.c 2009-06-15 22:51:43.000000000 -0700
+++ mod/drivers/net/vxge/vxge-main.c 2009-06-15 23:03:04.000000000 -0700
@@ -4203,6 +4203,17 @@ vxge_probe(struct pci_dev *pdev, const s
max_vpath_supported++;
}
+#ifdef CONFIG_PCI_IOV
+ /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
+ if ((VXGE_HW_FUNCTION_MODE_SRIOV ==
+ ll_config.device_hw_info.function_mode) &&
+ (max_config_dev > 1) && (pdev->is_physfn)) {
+ ret = pci_enable_sriov(pdev, max_config_dev - 1);
+ if (ret)
+ vxge_debug_ll_config(VXGE_ERR,
+ "Failed to enable SRIOV: %d \n", ret);
+ }
+#endif
/*
* Configure vpaths and get driver configured number of vpaths
* which is less than or equal to the maximum vpaths per function.
@@ -4366,6 +4377,9 @@ _exit6:
vxge_device_unregister(hldev);
_exit5:
+#ifdef CONFIG_PCI_IOV
+ pci_disable_sriov(pdev);
+#endif
vxge_hw_device_terminate(hldev);
_exit4:
iounmap(attr.bar1);
@@ -4428,6 +4442,9 @@ vxge_remove(struct pci_dev *pdev)
iounmap(vdev->bar0);
iounmap(vdev->bar1);
+#ifdef CONFIG_PCI_IOV
+ pci_disable_sriov(pdev);
+#endif
/* we are safe to free it now */
free_netdev(dev);
diff -urpN org/drivers/net/vxge/vxge-version.h mod/drivers/net/vxge/vxge-version.h
--- org/drivers/net/vxge/vxge-version.h 2009-06-15 22:51:54.000000000 -0700
+++ mod/drivers/net/vxge/vxge-version.h 2009-06-15 23:04:18.000000000 -0700
@@ -17,7 +17,7 @@
#define VXGE_VERSION_MAJOR "2"
#define VXGE_VERSION_MINOR "0"
-#define VXGE_VERSION_FIX "1"
-#define VXGE_VERSION_BUILD "17129"
+#define VXGE_VERSION_FIX "4"
+#define VXGE_VERSION_BUILD "17784"
#define VXGE_VERSION_FOR "k"
#endif
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists