[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <C27F8246C663564A84BB7AB343977242178EE7807E@IRVEXCHCCR01.corp.ad.broadcom.com>
Date: Tue, 23 Jun 2009 20:48:19 -0700
From: "Michael Chan" <mchan@...adcom.com>
To: "'Naohiro Ooiwa'" <nooiwa@...aclelinux.com>
cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH] bnx2: Fix the behavior of ethtool when ONBOOT=no
Naohiro Ooiwa wrote:
> Hi Michael
>
> I found a little bug.
>
> When configure in ifcfg-eth* is ONBOOT=no,
> the behavior of ethtool command is wrong.
>
> # grep ONBOOT /etc/sysconfig/network-scripts/ifcfg-eth2
> ONBOOT=no
> # ethtool eth2 | tail -n1
> Link detected: yes
>
> I think "Link detected" should be "no".
>
> The bnx2 driver should run netif_carrier_off() in initialization
> until bnx2_open() is called.
>
> The following is my patch.
> It move netif_carrier_off() to bnx2_init_one().
> I had already tested this patch. The result is good for me.
>
> Could you please check the my patch ?
>
>
> Best Regards,
> Naohiro Ooiwa
>
>
> Signed-off-by: Naohiro Ooiwa <nooiwa@...iraclelinux.com>
This patch will not work. Calling netif_carrier_off() will schedule
a link_watch event. If register_netdev() fails for any reason, the
netdev will be freed but the link_watch event can still be scheduled.
Calling netif_carrier_off() after register_netdev() returns also
will not work because it can then race with ->open() and the interrupt
that indicates link up.
Thanks.
> ---
> drivers/net/bnx2.c | 5 +++--
> 1 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
> index 38f1c33..9eee986 100644
> --- a/drivers/net/bnx2.c
> +++ b/drivers/net/bnx2.c
> @@ -6151,8 +6151,6 @@ bnx2_open(struct net_device *dev)
> struct bnx2 *bp = netdev_priv(dev);
> int rc;
>
> - netif_carrier_off(dev);
> -
> bnx2_set_power_state(bp, PCI_D0);
> bnx2_disable_int(bp);
>
> @@ -8066,6 +8064,9 @@ bnx2_init_one(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> if (CHIP_NUM(bp) == CHIP_NUM_5709)
> dev->features |= NETIF_F_TSO6;
>
> + /* Should set nocarrier until bnx2_open() is called */
> + netif_carrier_off(dev);
> +
> if ((rc = register_netdev(dev))) {
> dev_err(&pdev->dev, "Cannot register net device\n");
> goto error;
> --
> 1.5.4.1
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists