[<prev] [next>] [day] [month] [year] [list]
Message-Id: <200908201326.21438.florian@openwrt.org>
Date: Thu, 20 Aug 2009 13:26:20 +0200
From: Florian Fainelli <florian@...nwrt.org>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, mark@...feros.com,
bifferos <bifferos@...oo.co.uk>
Subject: [PATCH 2/3] r6040: move down second PHY detection to r6040_init_one
From: Mark Kelly <mark@...feros.com>
Instead of fully initializing an unusable second r6040
device, perform the PHY detection earlier and bail out
in r6040_init_one when we could not read the PHY identifier.
Signed-off-by: Mark Kelly <mark@...feros.com>
Signed-off-by: Florian Fainelli <florian@...nwrt.org>
---
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 60bd010..7238a6f 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -750,14 +750,6 @@ static int r6040_up(struct net_device *dev)
struct r6040_private *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
int ret;
- u16 val;
-
- /* Check presence of a second PHY */
- val = r6040_phy_read(ioaddr, lp->phy_addr, 2);
- if (val == 0xFFFF) {
- printk(KERN_ERR DRV_NAME " no second PHY attached\n");
- return -EIO;
- }
/* Initialise and alloc RX/TX buffers */
r6040_init_txbufs(dev);
@@ -1194,6 +1186,13 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
+ /* Check the vendor ID on the PHY, if 0xffff assume none attached */
+ if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
+ printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n");
+ err = -ENODEV;
+ goto err_out_unmap;
+ }
+
/* Register net device. After this dev->name assign */
err = register_netdev(dev);
if (err) {
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists