| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1251080117.6513.11.camel@pek-cluo-desktop>
Date: Mon, 24 Aug 2009 10:15:16 +0800
From: Luo Chunbo <chunbo.luo@...driver.com>
To: Vlad Yasevich <vladislav.yasevich@...com>
Cc: davem@...emloft.net, netdev@...r.kernel.org,
linux-sctp@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] sctp: fix the check for path failure detection
On Fri, 2009-08-21 at 17:47 -0400, Vlad Yasevich wrote:
> Chunbo Luo wrote:
> > The transport is marked DOWN immediately after sending the max+1 HB,
> > which is equal to not sending the max+1 HB at all. We should wait
> > a next period and make sure the last HB is not acknowledged.
> >
>
> I don't think this code does what you want either...
>
> Let's say path_max_rxt = 2. What we'll get is:
> timeout:
> err++ (1)
> if (err > 2) false
> send HB
> reset timer
> timeout:
> err++ (2)
> if (err > 2) false
> send HB
> reset timer
> timeout:
> err++ (3)
> if (err > 2)
> set transport DOWN
> send HB
> reset timer.
>
> We only had 2 unacknowledged HB when we should have had 3.
The error count is increment after the HB was sent, and the error count
check is before sending HB.
Let's say path_max_rxt =2 . What we really get is:
timeout:
if( err > 2) false
send HB
err++ (1)
reset timer
timeout:
if( err > 2) false
send HB
err++ (2)
reset timer
timeout:
if( err > 2) false
send HB
err++ (3)
reset timer
timeout:
if( err > 2)
set transport DOWN
send HB
reset timer
Here We had 3 unacknowledged HBs.
Thanks
Chunbo
>
> All you need to do is move the error error under a check that
> makes sure that HB has been sent (similar to how the rto doubling
> is done). Then you original patch would work where we change ">="
> to simply ">". The error count will be max+1 when transport is marked DOWN.
>
> -vlad
>
> > Signed-off-by: Chunbo Luo <chunbo.luo@...driver.com>
> > ---
> > include/net/sctp/command.h | 1 +
> > net/sctp/sm_sideeffect.c | 39 ++++++++++++++++++++++++++++-----------
> > net/sctp/sm_statefuns.c | 16 ++++++++++++++--
> > 3 files changed, 43 insertions(+), 13 deletions(-)
> >
> > diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
> > index 3b96680..256effd 100644
> > --- a/include/net/sctp/command.h
> > +++ b/include/net/sctp/command.h
> > @@ -77,6 +77,7 @@ typedef enum {
> > SCTP_CMD_HB_TIMERS_START, /* Start the heartbeat timers. */
> > SCTP_CMD_HB_TIMER_UPDATE, /* Update a heartbeat timers. */
> > SCTP_CMD_HB_TIMERS_STOP, /* Stop the heartbeat timers. */
> > + SCTP_CMD_PATH_FAILURE_DETECTION,/* Path failure detection. */
> > SCTP_CMD_TRANSPORT_HB_SENT, /* Reset the status of a transport. */
> > SCTP_CMD_TRANSPORT_IDLE, /* Do manipulations on idle transport */
> > SCTP_CMD_TRANSPORT_ON, /* Mark the transport as active. */
> > diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
> > index 86426aa..db299c6 100644
> > --- a/net/sctp/sm_sideeffect.c
> > +++ b/net/sctp/sm_sideeffect.c
> > @@ -432,7 +432,25 @@ sctp_timer_event_t *sctp_timer_events[SCTP_NUM_TIMEOUT_TYPES] = {
> > * mark the destination transport address as inactive, and a
> > * notification SHOULD be sent to the upper layer.
> > *
> > + * transport error counter is incremented in sctp_do_8_2_transport_strike
> > */
> > +static void sctp_cmd_path_failure_detection(struct sctp_association *asoc,
> > + struct sctp_transport *transport)
> > +{
> > + if (transport->error_count > transport->pathmaxrxt) {
> > + SCTP_DEBUG_PRINTK_IPADDR("transport_strike:association %p",
> > + " transport IP: port:%d failed.\n",
> > + asoc,
> > + (&transport->ipaddr),
> > + ntohs(transport->ipaddr.v4.sin_port));
> > + sctp_assoc_control_transport(asoc, transport,
> > + SCTP_TRANSPORT_DOWN,
> > + SCTP_FAILED_THRESHOLD);
> > + }
> > +}
> > +
> > +
> > + /* Mark a strike against a transport */
> > static void sctp_do_8_2_transport_strike(struct sctp_association *asoc,
> > struct sctp_transport *transport,
> > int is_hb)
> > @@ -446,17 +464,11 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc,
> > if (transport->state != SCTP_UNCONFIRMED)
> > asoc->overall_error_count++;
> >
> > - if (transport->state != SCTP_INACTIVE &&
> > - (transport->error_count++ >= transport->pathmaxrxt)) {
> > - SCTP_DEBUG_PRINTK_IPADDR("transport_strike:association %p",
> > - " transport IP: port:%d failed.\n",
> > - asoc,
> > - (&transport->ipaddr),
> > - ntohs(transport->ipaddr.v4.sin_port));
> > - sctp_assoc_control_transport(asoc, transport,
> > - SCTP_TRANSPORT_DOWN,
> > - SCTP_FAILED_THRESHOLD);
> > - }
> > + /* The check for transport's error counter exceeding the threshold
> > + * is done in the state function.
> > + */
> > + if (transport->state != SCTP_INACTIVE)
> > + transport->error_count++;
> >
> > /* E2) For the destination address for which the timer
> > * expires, set RTO <- RTO * 2 ("back off the timer"). The
> > @@ -1464,6 +1476,11 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
> > 0);
> > break;
> >
> > + case SCTP_CMD_PATH_FAILURE_DETECTION:
> > + t = cmd->obj.transport;
> > + sctp_cmd_path_failure_detection(asoc, t);
> > + break;
> > +
> > case SCTP_CMD_TRANSPORT_IDLE:
> > t = cmd->obj.transport;
> > sctp_transport_lower_cwnd(t, SCTP_LOWER_CWND_INACTIVE);
> > diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
> > index 7288192..f4c05fd 100644
> > --- a/net/sctp/sm_statefuns.c
> > +++ b/net/sctp/sm_statefuns.c
> > @@ -981,6 +981,9 @@ sctp_disposition_t sctp_sf_sendbeat_8_3(const struct sctp_endpoint *ep,
> > */
> >
> > if (transport->param_flags & SPP_HB_ENABLE) {
> > + /* Do the path failure detection before send beat */
> > + sctp_add_cmd_sf(commands, SCTP_CMD_PATH_FAILURE_DETECTION,
> > + SCTP_TRANSPORT(transport));
> > if (SCTP_DISPOSITION_NOMEM ==
> > sctp_sf_heartbeat(ep, asoc, type, arg,
> > commands))
> > @@ -5229,6 +5232,8 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(const struct sctp_endpoint *ep,
> > */
> >
> > /* Do some failure management (Section 8.2). */
> > + sctp_add_cmd_sf(commands, SCTP_CMD_PATH_FAILURE_DETECTION,
> > + SCTP_TRANSPORT(transport));
> > sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE, SCTP_TRANSPORT(transport));
> >
> > /* NB: Rules E4 and F1 are implicit in R1. */
> > @@ -5436,9 +5441,13 @@ sctp_disposition_t sctp_sf_t2_timer_expire(const struct sctp_endpoint *ep,
> > * If we remove the transport an SHUTDOWN was last sent to, don't
> > * do failure management.
> > */
> > - if (asoc->shutdown_last_sent_to)
> > + if (asoc->shutdown_last_sent_to) {
> > + sctp_add_cmd_sf(commands, SCTP_CMD_PATH_FAILURE_DETECTION,
> > + SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
> > +
> > sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
> > SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
> > + }
> >
> > /* Set the transport for the SHUTDOWN/ACK chunk and the timeout for
> > * the T2-shutdown timer.
> > @@ -5475,9 +5484,12 @@ sctp_disposition_t sctp_sf_t4_timer_expire(
> > * detection on the appropriate destination address as defined in
> > * RFC2960 [5] section 8.1 and 8.2.
> > */
> > - if (transport)
> > + if (transport) {
> > + sctp_add_cmd_sf(commands, SCTP_CMD_PATH_FAILURE_DETECTION,
> > + SCTP_TRANSPORT(transport));
> > sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
> > SCTP_TRANSPORT(transport));
> > + }
> >
> > /* Reconfig T4 timer and transport. */
> > sctp_add_cmd_sf(commands, SCTP_CMD_SETUP_T4, SCTP_CHUNK(chunk));
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists