| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1251867316.5962@xw6200>
Date: Tue, 1 Sep 2009 16:21:36 -0700
From: "Matt Carlson" <mcarlson@...adcom.com>
To: davem@...emloft.net
cc: netdev@...r.kernel.org, andy@...yhouse.net
Subject: [PATCH 17/18] tg3: Add MDIO bus address assignments
The 5717 is a dual port chip that has a shared MDIO bus design. While
it is impossible for one function to interface with the wrong phy, that
function still needs to know which MDIO bus address to use when
interfacing with its own phy. This patch adds code to determine which
MDIO bus address to use.
Signed-off-by: Matt Carlson <mcarlson@...adcom.com>
Reviewed-by: Benjamin Li <benli@...adcom.com>
---
drivers/net/tg3.c | 23 +++++++++++++++++++----
drivers/net/tg3.h | 3 +++
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index bc9c13a..a7eb6a0 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -782,7 +782,7 @@ static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
*val = 0x0;
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -833,7 +833,7 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
udelay(80);
}
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -1021,6 +1021,21 @@ static void tg3_mdio_start(struct tg3 *tp)
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ u32 funcnum, is_serdes;
+
+ funcnum = tr32(TG3_CPMU_STATUS) & TG3_CPMU_STATUS_PCIE_FUNC;
+ if (funcnum)
+ tp->phy_addr = 2;
+ else
+ tp->phy_addr = 1;
+
+ is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ if (is_serdes)
+ tp->phy_addr += 7;
+ } else
+ tp->phy_addr = PHY_ADDR;
+
if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
@@ -9266,7 +9281,7 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->speed = tp->link_config.active_speed;
cmd->duplex = tp->link_config.active_duplex;
}
- cmd->phy_address = PHY_ADDR;
+ cmd->phy_address = tp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = tp->link_config.autoneg;
cmd->maxtxpkt = 0;
@@ -10570,7 +10585,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
switch(cmd) {
case SIOCGMIIPHY:
- data->phy_id = PHY_ADDR;
+ data->phy_id = tp->phy_addr;
/* fallthru */
case SIOCGMIIREG: {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ea57a3a..82b45d8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -694,6 +694,7 @@
#define SG_DIG_PARTNER_FULL_DUPLEX 0x00020000 /* If !MRADV_CRC16_SELECT */
#define SG_DIG_PARTNER_NEXT_PAGE 0x00010000 /* If !MRADV_CRC16_SELECT */
#define SG_DIG_AUTONEG_STATE_MASK 0x00000ff0
+#define SG_DIG_IS_SERDES 0x00000100
#define SG_DIG_COMMA_DETECTOR 0x00000008
#define SG_DIG_MAC_ACK_STATUS 0x00000004
#define SG_DIG_AUTONEG_COMPLETE 0x00000002
@@ -2805,6 +2806,8 @@ struct tg3 {
struct mii_bus *mdio_bus;
int mdio_irq[PHY_MAX_ADDR];
+ u8 phy_addr;
+
/* PHY info */
u32 phy_id;
#define PHY_ID_MASK 0xfffffff0
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists