[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20090910020130.GA31083@oksana.dev.rtsoft.ru>
Date: Thu, 10 Sep 2009 06:01:30 +0400
From: Anton Vorontsov <avorontsov@...mvista.com>
To: David Miller <davem@...emloft.net>
Cc: Andy Fleming <afleming@...escale.com>,
Timur Tabi <timur@...escale.com>,
Li Yang <leoli@...escale.com>,
Kumar Gala <galak@...nel.crashing.org>, netdev@...r.kernel.org,
linuxppc-dev@...abs.org
Subject: [PATCH 1/3] phy/marvell: Make non-aneg speed/duplex forcing work
for 88E1111 PHYs
According to specs, when auto-negotiation is disabled, Marvell PHYs need
a software reset after changing speed/duplex forcing bits. Otherwise,
the modified bits have no effect.
Signed-off-by: Anton Vorontsov <avorontsov@...mvista.com>
---
drivers/net/phy/marvell.c | 21 ++++++++++++++++++++-
1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index dd6f54d..6f69b9b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -155,8 +155,27 @@ static int marvell_config_aneg(struct phy_device *phydev)
return err;
err = genphy_config_aneg(phydev);
+ if (err < 0)
+ return err;
- return err;
+ if (phydev->autoneg != AUTONEG_ENABLE) {
+ int bmcr;
+
+ /*
+ * A write to speed/duplex bits (that is performed by
+ * genphy_config_aneg() call above) must be followed by
+ * a software reset. Otherwise, the write has no effect.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
}
static int m88e1121_config_aneg(struct phy_device *phydev)
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists