netdev - Re: ipv4 regression in 2.6.31 ?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4AAE5F6E.3030008@gmail.com>
Date:	Mon, 14 Sep 2009 17:21:18 +0200
From:	Eric Dumazet <eric.dumazet@...il.com>
To:	Stephan von Krawczynski <skraw@...net.com>
CC:	linux-kernel@...r.kernel.org, davem@...emloft.net,
	Linux Netdev List <netdev@...r.kernel.org>
Subject: Re: ipv4 regression in 2.6.31 ?

Stephan von Krawczynski a écrit :
> On Mon, 14 Sep 2009 15:57:03 +0200
> Eric Dumazet <eric.dumazet@...il.com> wrote:
> 
>> Stephan von Krawczynski a écrit :
>>> Hello all,
>>>
>>> today we experienced some sort of regression in 2.6.31 ipv4 implementation, or
>>> at least some incompatibility with former 2.6.30.X kernels.
>>>
>>> We have the following situation:
>>>
>>>                                        ---------- vlan1@...0 192.168.2.1/24
>>>                                       /
>>> host A 192.168.1.1/24 eth0  -------<router>            host B
>>>                                       \
>>>                                        ---------- eth1 192.168.3.1/24
>>>
>>>
>>> Now, if you route 192.168.1.0/24 via interface vlan1@...0 on host B and let
>>> host A ping 192.168.2.1 everything works. But if you route 192.168.1.0/24 via
>>> interface eth1 on host B and let host A ping 192.168.2.1 you get no reply.
>>> With tcpdump we see the icmp packets arrive at vlan1@...0, but no icmp echo
>>> reply being generated neither on vlan1 nor eth1.
>>> Kernels 2.6.30.X and below do not show this behaviour.
>>> Is this intended? Do we need to reconfigure something to restore the old
>>> behaviour?
>>>
>> Asymetric routing ?
>>
>> Check your rp_filter settings
>>
>> grep . `find /proc/sys/net -name rp_filter`
>>
>> rp_filter - INTEGER
>>         0 - No source validation.
>>         1 - Strict mode as defined in RFC3704 Strict Reverse Path
>>             Each incoming packet is tested against the FIB and if the interface
>>             is not the best reverse path the packet check will fail.
>>             By default failed packets are discarded.
>>         2 - Loose mode as defined in RFC3704 Loose Reverse Path
>>             Each incoming packet's source address is also tested against the FIB
>>             and if the source address is not reachable via any interface
>>             the packet check will fail.
>>
>>         Current recommended practice in RFC3704 is to enable strict mode
>>         to prevent IP spoofing from DDos attacks. If using asymmetric routing
>>         or other complicated routing, then loose mode is recommended.
>>
>>         conf/all/rp_filter must also be set to non-zero to do source validation
>>         on the interface
>>
>>         Default value is 0. Note that some distributions enable it
>>         in startup scripts.
> 
> Problem is this:
> Kernel 2.6.30.X and below work flawlessly in this setup, only kernel 2.6.31
> acts different. Is this an intended change in policy?
> 

Here, it only depends on rp_filter settings, kernel 2.6.30 or 2.6.31

Please give your settings for further investigations, for all hosts involved.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html