| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1254815493-17576-1-git-send-email-peppe.cavallaro@st.com>
Date: Tue, 6 Oct 2009 09:51:33 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: netdev@...r.kernel.org
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCH] net: add support for STMicroelectronics Ethernet controllers.
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
controllers (Synopsys IP blocks).
Driver documentation:
o http://stlinux.com/drupal/kernel/network/stmmac
Revisions:
o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions
Performances:
o http://stlinux.com/drupal/benchmarks/networking/stmmac
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 1 +
drivers/net/stmmac/Kconfig | 53 +
drivers/net/stmmac/Makefile | 4 +
drivers/net/stmmac/common.h | 333 +++++
drivers/net/stmmac/descs.h | 163 +++
drivers/net/stmmac/gmac.c | 704 +++++++++++
drivers/net/stmmac/gmac.h | 204 +++
drivers/net/stmmac/mac100.c | 528 ++++++++
drivers/net/stmmac/mac100.h | 116 ++
drivers/net/stmmac/stmmac.h | 99 ++
drivers/net/stmmac/stmmac_ethtool.c | 393 ++++++
drivers/net/stmmac/stmmac_main.c | 2322 +++++++++++++++++++++++++++++++++++
drivers/net/stmmac/stmmac_mdio.c | 217 ++++
drivers/net/stmmac/stmmac_timer.c | 140 +++
drivers/net/stmmac/stmmac_timer.h | 41 +
16 files changed, 5320 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/stmmac/Kconfig
create mode 100644 drivers/net/stmmac/Makefile
create mode 100644 drivers/net/stmmac/common.h
create mode 100644 drivers/net/stmmac/descs.h
create mode 100644 drivers/net/stmmac/gmac.c
create mode 100644 drivers/net/stmmac/gmac.h
create mode 100644 drivers/net/stmmac/mac100.c
create mode 100644 drivers/net/stmmac/mac100.h
create mode 100644 drivers/net/stmmac/stmmac.h
create mode 100644 drivers/net/stmmac/stmmac_ethtool.c
create mode 100644 drivers/net/stmmac/stmmac_main.c
create mode 100644 drivers/net/stmmac/stmmac_mdio.c
create mode 100644 drivers/net/stmmac/stmmac_timer.c
create mode 100644 drivers/net/stmmac/stmmac_timer.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7127760..e86c95b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2482,6 +2482,8 @@ config S6GMAC
To compile this driver as a module, choose M here. The module
will be called s6gmac.
+source "drivers/net/stmmac/Kconfig"
+
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d866b8c..e41c553 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
#
# end link order section
diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/stmmac/Kconfig
new file mode 100644
index 0000000..35eaa52
--- /dev/null
+++ b/drivers/net/stmmac/Kconfig
@@ -0,0 +1,53 @@
+config STMMAC_ETH
+ tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+ select MII
+ select PHYLIB
+ depends on NETDEVICES && CPU_SUBTYPE_ST40
+ help
+ This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
+ controllers. ST Ethernet IPs are built around a Synopsys IP Core.
+
+if STMMAC_ETH
+
+config STMMAC_DA
+ bool "STMMAC DMA arbitration scheme"
+ default n
+ help
+ Selecting this option, rx has priority over Tx (only for Giga
+ Ethernet device).
+ By default, the DMA arbitration scheme is based on Round-robin
+ (rx:tx priority is 1:1).
+
+config STMMAC_DUAL_MAC
+ bool "STMMAC: dual mac support (EXPERIMENTAL)"
+ default n
+ depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
+ help
+ Some ST SoCs (for example the stx7141 and stx7200c2) have two
+ Ethernet Controllers. This option turns on the second Ethernet
+ device on this kind of platforms.
+
+config STMMAC_TIMER
+ bool "STMMAC Timer optimisation"
+ default n
+ help
+ Use an external timer for mitigating the number of network
+ interrupts.
+
+choice
+ prompt "Select Timer device"
+ depends on STMMAC_TIMER
+
+config STMMAC_TMU_TIMER
+ bool "TMU channel 2"
+ depends on CPU_SH4
+ help
+
+config STMMAC_RTC_TIMER
+ bool "Real time clock"
+ depends on RTC_CLASS
+ help
+
+endchoice
+
+endif
diff --git a/drivers/net/stmmac/Makefile b/drivers/net/stmmac/Makefile
new file mode 100644
index 0000000..d64b9d0
--- /dev/null
+++ b/drivers/net/stmmac/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_STMMAC_ETH) += stmmac.o
+stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
+ mac100.o gmac.o $(stmmac-y)
diff --git a/drivers/net/stmmac/common.h b/drivers/net/stmmac/common.h
new file mode 100644
index 0000000..339e7ba
--- /dev/null
+++ b/drivers/net/stmmac/common.h
@@ -0,0 +1,333 @@
+/*******************************************************************************
+ STMMAC Common Header File
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include "descs.h"
+#include <linux/io.h>
+
+/* *********************************************
+ DMA CRS Control and Status Register Mapping
+ * *********************************************/
+#define DMA_BUS_MODE 0x00001000 /* Bus Mode */
+#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */
+#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */
+#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */
+#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */
+#define DMA_STATUS 0x00001014 /* Status Register */
+#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */
+#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */
+#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */
+#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */
+#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */
+
+/* ********************************
+ DMA Control register defines
+ * ********************************/
+#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
+#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
+
+/* **************************************
+ DMA Interrupt Enable register defines
+ * **************************************/
+/**** NORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
+#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
+#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
+#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
+
+#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+ DMA_INTR_ENA_TIE)
+
+/**** ABNORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
+#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
+#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
+
+#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+ DMA_INTR_ENA_UNE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+/* Disable DMA Rx IRQ (NAPI) */
+#define DMA_INTR_NO_RX (DMA_INTR_ENA_NIE | DMA_INTR_ENA_TIE | \
+ DMA_INTR_ENA_TUE | DMA_INTR_ABNORMAL)
+
+/* ****************************
+ * DMA Status register defines
+ * ****************************/
+#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
+#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
+#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */
+#define DMA_STATUS_GMI 0x08000000
+#define DMA_STATUS_GLI 0x04000000
+#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT 20
+#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
+#define DMA_STATUS_RS_SHIFT 17
+#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
+#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
+#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
+#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
+#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
+#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
+#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
+#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
+#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
+#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
+
+/* Other defines */
+#define HASH_TABLE_SIZE 64
+#define PAUSE_TIME 0x200
+
+/* Flow Control defines */
+#define FLOW_OFF 0
+#define FLOW_RX 1
+#define FLOW_TX 2
+#define FLOW_AUTO (FLOW_TX | FLOW_RX)
+
+/* DMA STORE-AND-FORWARD Operation Mode */
+#define SF_DMA_MODE 1
+
+#define HW_CSUM 1
+#define NO_HW_CSUM 0
+
+/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
+
+/* Power Down and WOL */
+#define PMT_NOT_SUPPORTED 0
+#define PMT_SUPPORTED 1
+
+/* Common MAC defines */
+#define MAC_CTRL_REG 0x00000000 /* MAC Control */
+#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
+#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+
+/* MAC Management Counters register */
+#define MMC_CONTROL 0x00000100 /* MMC Control */
+#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */
+#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */
+#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */
+#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */
+
+#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */
+#define MMC_CONTROL_MAX_FRM_SHIFT 3
+#define MMC_CONTROL_MAX_FRAME 0x7FF
+
+struct stmmac_extra_stats {
+ /* Transmit errors */
+ unsigned long tx_underflow ____cacheline_aligned;
+ unsigned long tx_carrier;
+ unsigned long tx_losscarrier;
+ unsigned long tx_heartbeat;
+ unsigned long tx_deferred;
+ unsigned long tx_vlan;
+ unsigned long tx_jabber;
+ unsigned long tx_frame_flushed;
+ unsigned long tx_payload_error;
+ unsigned long tx_ip_header_error;
+ /* Receive errors */
+ unsigned long rx_desc;
+ unsigned long rx_partial;
+ unsigned long rx_runt;
+ unsigned long rx_toolong;
+ unsigned long rx_collision;
+ unsigned long rx_crc;
+ unsigned long rx_lenght;
+ unsigned long rx_mii;
+ unsigned long rx_multicast;
+ unsigned long rx_gmac_overflow;
+ unsigned long rx_watchdog;
+ unsigned long da_rx_filter_fail;
+ unsigned long sa_rx_filter_fail;
+ unsigned long rx_missed_cntr;
+ unsigned long rx_overflow_cntr;
+ unsigned long rx_vlan;
+ /* Tx/Rx IRQ errors */
+ unsigned long tx_undeflow_irq;
+ unsigned long tx_process_stopped_irq;
+ unsigned long tx_jabber_irq;
+ unsigned long rx_overflow_irq;
+ unsigned long rx_buf_unav_irq;
+ unsigned long rx_process_stopped_irq;
+ unsigned long rx_watchdog_irq;
+ unsigned long tx_early_irq;
+ unsigned long fatal_bus_error_irq;
+ /* Extra info */
+ unsigned long threshold;
+ unsigned long tx_pkt_n;
+ unsigned long poll_n;
+ unsigned long rx_pkt_n;
+};
+
+/* GMAC core can compute the checksums in HW. */
+enum rx_frame_status {
+ good_frame = 0,
+ discard_frame = 1,
+ csum_none = 2,
+};
+
+static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+ unsigned int high, unsigned int low)
+{
+ unsigned long data;
+
+ data = (addr[5] << 8) | addr[4];
+ writel(data, ioaddr + high);
+ data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+ writel(data, ioaddr + low);
+
+ return;
+}
+
+static inline void stmmac_get_mac_addr(unsigned long ioaddr,
+ unsigned char *addr, unsigned int high,
+ unsigned int low)
+{
+ unsigned int hi_addr, lo_addr;
+
+ /* Read the MAC address from the hardware */
+ hi_addr = readl(ioaddr + high);
+ lo_addr = readl(ioaddr + low);
+
+ /* Extract the MAC address from the high and low words */
+ addr[0] = lo_addr & 0xff;
+ addr[1] = (lo_addr >> 8) & 0xff;
+ addr[2] = (lo_addr >> 16) & 0xff;
+ addr[3] = (lo_addr >> 24) & 0xff;
+ addr[4] = hi_addr & 0xff;
+ addr[5] = (hi_addr >> 8) & 0xff;
+
+ return;
+}
+
+struct stmmac_ops {
+ /* MAC core initialization */
+ void (*core_init) (unsigned long ioaddr) ____cacheline_aligned;
+ /* DMA core initialization */
+ int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx);
+ /* Dump MAC registers */
+ void (*dump_mac_regs) (unsigned long ioaddr);
+ /* Dump DMA registers */
+ void (*dump_dma_regs) (unsigned long ioaddr);
+ /* Set tx/rx threshold in the csr6 register
+ * An invalid value enables the store-and-forward mode */
+ void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode);
+ /* To track extra statistic (if supported) */
+ void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr);
+ /* RX descriptor ring initialization */
+ void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size);
+ /* TX descriptor ring initialization */
+ void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size);
+
+ /* Invoked by the xmit function to prepare the tx descriptor */
+ void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
+ int csum_flag);
+ /* Set/get the owner of the descriptor */
+ void (*set_tx_owner) (struct dma_desc *p);
+ int (*get_tx_owner) (struct dma_desc *p);
+ /* Invoked by the xmit function to close the tx descriptor */
+ void (*close_tx_desc) (struct dma_desc *p);
+ /* Clean the tx descriptor as soon as the tx irq is received */
+ void (*release_tx_desc) (struct dma_desc *p);
+ /* Clear interrupt on tx frame completion. When this bit is
+ * set an interrupt happens as soon as the frame is transmitted */
+ void (*clear_tx_ic) (struct dma_desc *p);
+ /* Last tx segment reports the transmit status */
+ int (*get_tx_ls) (struct dma_desc *p);
+ /* Return the transmit status looking at the TDES1 */
+ int (*tx_status) (void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr);
+ /* Get the buffer size from the descriptor */
+ int (*get_tx_len) (struct dma_desc *p);
+ /* Handle extra events on specific interrupts hw dependent */
+ void (*host_irq_status) (unsigned long ioaddr);
+ /* Interrupt after this number of packets have arrived. */
+ void (*disable_rx_ic) (struct dma_desc *p, unsigned int ring_size,
+ int disable_ic);
+ int (*get_rx_owner) (struct dma_desc *p);
+ void (*set_rx_owner) (struct dma_desc *p);
+ /* Get the receive frame size */
+ int (*get_rx_frame_len) (struct dma_desc *p);
+ /* Return the reception status looking at the RDES1 */
+ int (*rx_status) (void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p);
+ /* Multicast filter setting */
+ void (*set_filter) (struct net_device *dev);
+ /* Flow control setting */
+ void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time);
+ /* Set power management mode (e.g. magic frame) */
+ void (*pmt) (unsigned long ioaddr, unsigned long mode);
+ /* Set/Get Unicast MAC addresses */
+ void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n);
+ void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n);
+};
+
+struct mac_link {
+ int port;
+ int duplex;
+ int speed;
+};
+
+struct mii_regs {
+ unsigned int addr; /* MII Address */
+ unsigned int data; /* MII Data */
+};
+
+struct hw_cap {
+ unsigned int version; /* Core Version register (GMAC) */
+ unsigned int pmt; /* Power-Down mode (GMAC) */
+ struct mac_link link;
+ struct mii_regs mii;
+};
+
+struct mac_device_info {
+ struct hw_cap hw;
+ struct stmmac_ops *ops;
+};
+
+struct mac_device_info *gmac_setup(unsigned long addr);
+struct mac_device_info *mac100_setup(unsigned long addr);
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/stmmac/descs.h
new file mode 100644
index 0000000..6d2a0b2
--- /dev/null
+++ b/drivers/net/stmmac/descs.h
@@ -0,0 +1,163 @@
+/*******************************************************************************
+ Header File to describe the DMA descriptors
+ Use enhanced descriptors in case of GMAC Cores.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+struct dma_desc {
+ /* Receive descriptor */
+ union {
+ struct {
+ /* RDES0 */
+ u32 reserved1:1;
+ u32 crc_error:1;
+ u32 dribbling:1;
+ u32 mii_error:1;
+ u32 receive_watchdog:1;
+ u32 frame_type:1;
+ u32 collision:1;
+ u32 frame_too_long:1;
+ u32 last_descriptor:1;
+ u32 first_descriptor:1;
+ u32 multicast_frame:1;
+ u32 run_frame:1;
+ u32 length_error:1;
+ u32 partial_frame_error:1;
+ u32 descriptor_error:1;
+ u32 error_summary:1;
+ u32 frame_length:14;
+ u32 filtering_fail:1;
+ u32 own:1;
+ /* RDES1 */
+ u32 buffer1_size:11;
+ u32 buffer2_size:11;
+ u32 reserved2:2;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 reserved3:5;
+ u32 disable_ic:1;
+ } rx;
+ struct {
+ /* RDES0 */
+ u32 payload_csum_error:1;
+ u32 crc_error:1;
+ u32 dribbling:1;
+ u32 error_gmii:1;
+ u32 receive_watchdog:1;
+ u32 frame_type:1;
+ u32 late_collision:1;
+ u32 ipc_csum_error:1;
+ u32 last_descriptor:1;
+ u32 first_descriptor:1;
+ u32 vlan_tag:1;
+ u32 overflow_error:1;
+ u32 length_error:1;
+ u32 sa_filter_fail:1;
+ u32 descriptor_error:1;
+ u32 error_summary:1;
+ u32 frame_length:14;
+ u32 da_filter_fail:1;
+ u32 own:1;
+ /* RDES1 */
+ u32 buffer1_size:13;
+ u32 reserved1:1;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 buffer2_size:13;
+ u32 reserved2:2;
+ u32 disable_ic:1;
+ } erx; /* -- enhanced -- */
+
+ /* Transmit descriptor */
+ struct {
+ /* TDES0 */
+ u32 deferred:1;
+ u32 underflow_error:1;
+ u32 excessive_deferral:1;
+ u32 collision_count:4;
+ u32 heartbeat_fail:1;
+ u32 excessive_collisions:1;
+ u32 late_collision:1;
+ u32 no_carrier:1;
+ u32 loss_carrier:1;
+ u32 reserved1:3;
+ u32 error_summary:1;
+ u32 reserved2:15;
+ u32 own:1;
+ /* TDES1 */
+ u32 buffer1_size:11;
+ u32 buffer2_size:11;
+ u32 reserved3:1;
+ u32 disable_padding:1;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 crc_disable:1;
+ u32 reserved4:2;
+ u32 first_segment:1;
+ u32 last_segment:1;
+ u32 interrupt:1;
+ } tx;
+ struct {
+ /* TDES0 */
+ u32 deferred:1;
+ u32 underflow_error:1;
+ u32 excessive_deferral:1;
+ u32 collision_count:4;
+ u32 vlan_frame:1;
+ u32 excessive_collisions:1;
+ u32 late_collision:1;
+ u32 no_carrier:1;
+ u32 loss_carrier:1;
+ u32 payload_error:1;
+ u32 frame_flushed:1;
+ u32 jabber_timeout:1;
+ u32 error_summary:1;
+ u32 ip_header_error:1;
+ u32 time_stamp_status:1;
+ u32 reserved1:2;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 checksum_insertion:2;
+ u32 reserved2:1;
+ u32 time_stamp_enable:1;
+ u32 disable_padding:1;
+ u32 crc_disable:1;
+ u32 first_segment:1;
+ u32 last_segment:1;
+ u32 interrupt:1;
+ u32 own:1;
+ /* TDES1 */
+ u32 buffer1_size:13;
+ u32 reserved3:3;
+ u32 buffer2_size:13;
+ u32 reserved4:3;
+ } etx; /* -- enhanced -- */
+ } des01;
+ unsigned int des2;
+ unsigned int des3;
+};
+
+/* Transmit checksum insertion control */
+enum tdes_csum_insertion {
+ cic_disabled = 0, /* Checksum Insertion Control */
+ cic_only_ip = 1, /* Only IP header */
+ cic_no_pseudoheader = 2, /* IP header but pseudoheader
+ * is not calculated */
+ cic_full = 3, /* IP header and pseudoheader */
+};
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
new file mode 100644
index 0000000..44c829b
--- /dev/null
+++ b/drivers/net/stmmac/gmac.c
@@ -0,0 +1,704 @@
+/*******************************************************************************
+ This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+ DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
+ developing this code.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+#include "gmac.h"
+
+#undef GMAC_DEBUG
+/*#define GMAC_DEBUG*/
+#undef FRAME_FILTER_DEBUG
+/*#define FRAME_FILTER_DEBUG*/
+#ifdef GMAC_DEBUG
+#define DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define DBG(fmt, args...) do { } while (0)
+#endif
+
+static void gmac_dump_regs(unsigned long ioaddr)
+{
+ int i;
+ pr_info("\t----------------------------------------------\n"
+ "\t GMAC registers (base addr = 0x%8x)\n"
+ "\t----------------------------------------------\n",
+ (unsigned int)ioaddr);
+
+ for (i = 0; i < 55; i++) {
+ int offset = i * 4;
+ pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
+ offset, readl(ioaddr + offset));
+ }
+ return;
+}
+
+static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx)
+{
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
+ /* DMA SW reset */
+ value |= DMA_BUS_MODE_SFT_RESET;
+ writel(value, ioaddr + DMA_BUS_MODE);
+ do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+ value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
+ ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
+ (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+
+#ifdef CONFIG_STMMAC_DA
+ value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */
+#endif
+ writel(value, ioaddr + DMA_BUS_MODE);
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+ /* The base address of the RX/TX descriptor lists must be written into
+ * DMA CSR3 and CSR4, respectively. */
+ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+ writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+ return 0;
+}
+
+/* Transmit FIFO flush operation */
+static void gmac_flush_tx_fifo(unsigned long ioaddr)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+ writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
+
+ do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
+}
+
+static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
+ int rxmode)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+ if (txmode == SF_DMA_MODE) {
+ DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n");
+ /* Transmit COE type 2 cannot be done in cut-through mode. */
+ csr6 |= DMA_CONTROL_TSF;
+ /* Operating on second frame increase the performance
+ * especially when transmit store-and-forward is used.*/
+ csr6 |= DMA_CONTROL_OSF;
+ } else {
+ DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
+ " (threshold = %d)\n", txmode);
+ csr6 &= ~DMA_CONTROL_TSF;
+ csr6 &= DMA_CONTROL_TC_TX_MASK;
+ /* Set the transmit threashold */
+ if (txmode <= 32)
+ csr6 |= DMA_CONTROL_TTC_32;
+ else if (txmode <= 64)
+ csr6 |= DMA_CONTROL_TTC_64;
+ else if (txmode <= 128)
+ csr6 |= DMA_CONTROL_TTC_128;
+ else if (txmode <= 192)
+ csr6 |= DMA_CONTROL_TTC_192;
+ else
+ csr6 |= DMA_CONTROL_TTC_256;
+ }
+
+ if (rxmode == SF_DMA_MODE) {
+ DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n");
+ csr6 |= DMA_CONTROL_RSF;
+ } else {
+ DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
+ " (threshold = %d)\n", rxmode);
+ csr6 &= ~DMA_CONTROL_RSF;
+ csr6 &= DMA_CONTROL_TC_RX_MASK;
+ if (rxmode <= 32)
+ csr6 |= DMA_CONTROL_RTC_32;
+ else if (rxmode <= 64)
+ csr6 |= DMA_CONTROL_RTC_64;
+ else if (rxmode <= 96)
+ csr6 |= DMA_CONTROL_RTC_96;
+ else
+ csr6 |= DMA_CONTROL_RTC_128;
+ }
+
+ writel(csr6, ioaddr + DMA_CONTROL);
+ return;
+}
+
+/* Not yet implemented --- no RMON module */
+static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr)
+{
+ return;
+}
+
+static void gmac_dump_dma_regs(unsigned long ioaddr)
+{
+ int i;
+ pr_info(" DMA registers\n");
+ for (i = 0; i < 22; i++) {
+ if ((i < 9) || (i > 17)) {
+ int offset = i * 4;
+ pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
+ (DMA_BUS_MODE + offset),
+ readl(ioaddr + DMA_BUS_MODE + offset));
+ }
+ }
+ return;
+}
+
+static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr)
+{
+ int ret = 0;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.etx.error_summary)) {
+ DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx);
+ if (unlikely(p->des01.etx.jabber_timeout)) {
+ DBG(KERN_ERR "\tjabber_timeout error\n");
+ x->tx_jabber++;
+ }
+
+ if (unlikely(p->des01.etx.frame_flushed)) {
+ DBG(KERN_ERR "\tframe_flushed error\n");
+ x->tx_frame_flushed++;
+ gmac_flush_tx_fifo(ioaddr);
+ }
+
+ if (unlikely(p->des01.etx.loss_carrier)) {
+ DBG(KERN_ERR "\tloss_carrier error\n");
+ x->tx_losscarrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.etx.no_carrier)) {
+ DBG(KERN_ERR "\tno_carrier error\n");
+ x->tx_carrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.etx.late_collision)) {
+ DBG(KERN_ERR "\tlate_collision error\n");
+ stats->collisions += p->des01.etx.collision_count;
+ }
+ if (unlikely(p->des01.etx.excessive_collisions)) {
+ DBG(KERN_ERR "\texcessive_collisions\n");
+ stats->collisions += p->des01.etx.collision_count;
+ }
+ if (unlikely(p->des01.etx.excessive_deferral)) {
+ DBG(KERN_INFO "\texcessive tx_deferral\n");
+ x->tx_deferred++;
+ }
+
+ if (unlikely(p->des01.etx.underflow_error)) {
+ DBG(KERN_ERR "\tunderflow error\n");
+ gmac_flush_tx_fifo(ioaddr);
+ x->tx_underflow++;
+ }
+
+ if (unlikely(p->des01.etx.ip_header_error)) {
+ DBG(KERN_ERR "\tTX IP header csum error\n");
+ x->tx_ip_header_error++;
+ }
+
+ if (unlikely(p->des01.etx.payload_error)) {
+ DBG(KERN_ERR "\tAddr/Payload csum error\n");
+ x->tx_payload_error++;
+ gmac_flush_tx_fifo(ioaddr);
+ }
+
+ ret = -1;
+ }
+
+ if (unlikely(p->des01.etx.deferred)) {
+ DBG(KERN_INFO "GMAC TX status: tx deferred\n");
+ x->tx_deferred++;
+ }
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.etx.vlan_frame) {
+ DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+ x->tx_vlan++;
+ }
+#endif
+
+ return ret;
+}
+
+static int gmac_get_tx_len(struct dma_desc *p)
+{
+ return p->des01.etx.buffer1_size;
+}
+
+static int gmac_coe_rdes0(int ipc_err, int type, int payload_err)
+{
+ int ret = good_frame;
+ u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
+
+ /* bits 5 7 0 | Frame status
+ * ----------------------------------------------------------
+ * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
+ * 1 0 0 | IPv4/6 No CSUM errorS.
+ * 1 0 1 | IPv4/6 CSUM PAYLOAD error
+ * 1 1 0 | IPv4/6 CSUM IP HR error
+ * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS
+ * 0 0 1 | IPv4/6 unsupported IP PAYLOAD
+ * 0 1 1 | COE bypassed.. no IPv4/6 frame
+ * 0 1 0 | Reserved.
+ */
+ if (status == 0x0) {
+ DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n");
+ ret = good_frame;
+ } else if (status == 0x4) {
+ DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n");
+ ret = good_frame;
+ } else if (status == 0x5) {
+ DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n");
+ ret = csum_none;
+ } else if (status == 0x6) {
+ DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n");
+ ret = csum_none;
+ } else if (status == 0x7) {
+ DBG(KERN_ERR
+ "RX Des0 status: IPv4/6 Header and Payload Error.\n");
+ ret = csum_none;
+ } else if (status == 0x1) {
+ DBG(KERN_ERR
+ "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n");
+ ret = discard_frame;
+ } else if (status == 0x3) {
+ DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
+ ret = discard_frame;
+ }
+ return ret;
+}
+
+static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p)
+{
+ int ret = good_frame;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.erx.error_summary)) {
+ DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx);
+ if (unlikely(p->des01.erx.descriptor_error)) {
+ DBG(KERN_ERR "\tdescriptor error\n");
+ x->rx_desc++;
+ stats->rx_length_errors++;
+ }
+ if (unlikely(p->des01.erx.overflow_error)) {
+ DBG(KERN_ERR "\toverflow error\n");
+ x->rx_gmac_overflow++;
+ }
+
+ if (unlikely(p->des01.erx.ipc_csum_error))
+ DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n");
+
+ if (unlikely(p->des01.erx.late_collision)) {
+ DBG(KERN_ERR "\tlate_collision error\n");
+ stats->collisions++;
+ stats->collisions++;
+ }
+ if (unlikely(p->des01.erx.receive_watchdog)) {
+ DBG(KERN_ERR "\treceive_watchdog error\n");
+ x->rx_watchdog++;
+ }
+ if (unlikely(p->des01.erx.error_gmii)) {
+ DBG(KERN_ERR "\tReceive Error\n");
+ x->rx_mii++;
+ }
+ if (unlikely(p->des01.erx.crc_error)) {
+ DBG(KERN_ERR "\tCRC error\n");
+ x->rx_crc++;
+ stats->rx_crc_errors++;
+ }
+ ret = discard_frame;
+ }
+
+ /* After a payload csum error, the ES bit is set.
+ * It doesn't match with the information reported into the databook.
+ * At any rate, we need to understand if the CSUM hw computation is ok
+ * and report this info to the upper layers. */
+ ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error,
+ p->des01.erx.frame_type, p->des01.erx.payload_csum_error);
+
+ if (unlikely(p->des01.erx.dribbling)) {
+ DBG(KERN_ERR "GMAC RX: dribbling error\n");
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.sa_filter_fail)) {
+ DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
+ x->sa_rx_filter_fail++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.da_filter_fail)) {
+ DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n");
+ x->da_rx_filter_fail++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.length_error)) {
+ DBG(KERN_ERR "GMAC RX: length_error error\n");
+ x->rx_lenght++;
+ ret = discard_frame;
+ }
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.erx.vlan_tag) {
+ DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n");
+ x->rx_vlan++;
+ }
+#endif
+ return ret;
+}
+
+static void gmac_irq_status(unsigned long ioaddr)
+{
+ u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+
+ /* Not used events (e.g. MMC interrupts) are not handled. */
+ if ((intr_status & mmc_tx_irq))
+ DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_TX_INTR));
+ if (unlikely(intr_status & mmc_rx_irq))
+ DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_RX_INTR));
+ if (unlikely(intr_status & mmc_rx_csum_offload_irq))
+ DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+ if (unlikely(intr_status & pmt_irq)) {
+ DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+ /* clear the PMT bits 5 and 6 by reading the PMT
+ * status register. */
+ readl(ioaddr + GMAC_PMT);
+ }
+
+ return;
+}
+
+static void gmac_core_init(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + GMAC_CONTROL);
+ value |= GMAC_CORE_INIT;
+ writel(value, ioaddr + GMAC_CONTROL);
+
+ /* STBus Bridge Configuration */
+ /*writel(0xc5608, ioaddr + 0x00007000);*/
+
+ /* Freeze MMC counters */
+ writel(0x8, ioaddr + GMAC_MMC_CTRL);
+ /* Mask GMAC interrupts */
+ writel(0x207, ioaddr + GMAC_INT_MASK);
+
+#ifdef STMMAC_VLAN_TAG_USED
+ /* Tag detection without filtering */
+ writel(0x0, ioaddr + GMAC_VLAN_TAG);
+#endif
+ return;
+}
+
+static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+ GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+ GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_set_filter(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int value = 0;
+
+ DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
+ __func__, dev->mc_count, dev->uc_count);
+
+ if (dev->flags & IFF_PROMISC)
+ value = GMAC_FRAME_FILTER_PR;
+ else if ((dev->mc_count > HASH_TABLE_SIZE)
+ || (dev->flags & IFF_ALLMULTI)) {
+ value = GMAC_FRAME_FILTER_PM; /* pass all multi */
+ writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
+ writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
+ } else if (dev->mc_count > 0) {
+ int i;
+ u32 mc_filter[2];
+ struct dev_mc_list *mclist;
+
+ /* Hash filter for multicast */
+ value = GMAC_FRAME_FILTER_HMC;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ for (i = 0, mclist = dev->mc_list;
+ mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ /* The upper 6 bits of the calculated CRC are used to
+ index the contens of the hash table */
+ int bit_nr =
+ bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26;
+ /* The most significant bit determines the register to
+ * use (H/L) while the other 5 bits determine the bit
+ * within the register. */
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ writel(mc_filter[0], ioaddr + GMAC_HASH_LOW);
+ writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH);
+ }
+
+ /* Handle multiple unicast addresses (perfect filtering)*/
+ if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES)
+ /* Switch to promiscuous mode is more than 16 addrs
+ are required */
+ value |= GMAC_FRAME_FILTER_PR;
+ else {
+ int i;
+ struct dev_addr_list *uc_ptr = dev->uc_list;
+
+ for (i = 0; i < dev->uc_count; i++) {
+ gmac_set_umac_addr(ioaddr, uc_ptr->da_addr,
+ i + 1);
+
+ DBG(KERN_INFO "\t%d "
+ "- Unicast addr %02x:%02x:%02x:%02x:%02x:"
+ "%02x\n", i + 1,
+ uc_ptr->da_addr[0], uc_ptr->da_addr[1],
+ uc_ptr->da_addr[2], uc_ptr->da_addr[3],
+ uc_ptr->da_addr[4], uc_ptr->da_addr[5]);
+ uc_ptr = uc_ptr->next;
+ }
+ }
+
+#ifdef FRAME_FILTER_DEBUG
+ /* Enable Receive all mode (to debug filtering_fail errors) */
+ value |= GMAC_FRAME_FILTER_RA;
+#endif
+ writel(value, ioaddr + GMAC_FRAME_FILTER);
+
+ DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
+ "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
+ readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
+
+ return;
+}
+
+static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time)
+{
+ unsigned int flow = 0;
+
+ DBG(KERN_DEBUG "GMAC Flow-Control:\n");
+ if (fc & FLOW_RX) {
+ DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
+ flow |= GMAC_FLOW_CTRL_RFE;
+ }
+ if (fc & FLOW_TX) {
+ DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
+ flow |= GMAC_FLOW_CTRL_TFE;
+ }
+
+ if (duplex) {
+ DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
+ flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
+ }
+
+ writel(flow, ioaddr + GMAC_FLOW_CTRL);
+ return;
+}
+
+static void gmac_pmt(unsigned long ioaddr, unsigned long mode)
+{
+ unsigned int pmt = 0;
+
+ if (mode == WAKE_MAGIC) {
+ DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
+ pmt |= power_down | magic_pkt_en;
+ } else if (mode == WAKE_UCAST) {
+ DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
+ pmt |= global_unicast;
+ }
+
+ writel(pmt, ioaddr + GMAC_PMT);
+ return;
+}
+
+static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.erx.own = 1;
+ p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
+ /* To support jumbo frames */
+ p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
+ if (i == ring_size - 1)
+ p->des01.erx.end_ring = 1;
+ p++;
+ }
+ return;
+}
+
+static void gmac_disable_rx_ic(struct dma_desc *p, unsigned int ring_size,
+ int disable_ic)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ if (i % disable_ic)
+ p->des01.erx.disable_ic = 1;
+ p++;
+ }
+ return;
+}
+
+static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+
+ for (i = 0; i < ring_size; i++) {
+ p->des01.etx.own = 0;
+ if (i == ring_size - 1)
+ p->des01.etx.end_ring = 1;
+ p++;
+ }
+
+ return;
+}
+
+static int gmac_get_tx_owner(struct dma_desc *p)
+{
+ return p->des01.etx.own;
+}
+
+static int gmac_get_rx_owner(struct dma_desc *p)
+{
+ return p->des01.erx.own;
+}
+
+static void gmac_set_tx_owner(struct dma_desc *p)
+{
+ p->des01.etx.own = 1;
+}
+
+static void gmac_set_rx_owner(struct dma_desc *p)
+{
+ p->des01.erx.own = 1;
+}
+
+static int gmac_get_tx_ls(struct dma_desc *p)
+{
+ return p->des01.etx.last_segment;
+}
+
+static void gmac_release_tx_desc(struct dma_desc *p)
+{
+ int ter = p->des01.etx.end_ring;
+
+ memset(p, 0, sizeof(struct dma_desc));
+ p->des01.etx.end_ring = ter;
+
+ return;
+}
+
+static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+ int csum_flag)
+{
+ p->des01.etx.first_segment = is_fs;
+ if (unlikely(len > BUF_SIZE_4KiB)) {
+ p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
+ p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
+ } else {
+ p->des01.etx.buffer1_size = len;
+ }
+ if (likely(csum_flag))
+ p->des01.etx.checksum_insertion = cic_full;
+}
+
+static void gmac_clear_tx_ic(struct dma_desc *p)
+{
+ p->des01.etx.interrupt = 0;
+}
+
+static void gmac_close_tx_desc(struct dma_desc *p)
+{
+ p->des01.etx.last_segment = 1;
+ p->des01.etx.interrupt = 1;
+}
+
+static int gmac_get_rx_frame_len(struct dma_desc *p)
+{
+ return p->des01.erx.frame_length;
+}
+
+struct stmmac_ops gmac_driver = {
+ .core_init = gmac_core_init,
+ .dump_mac_regs = gmac_dump_regs,
+ .dma_init = gmac_dma_init,
+ .dump_dma_regs = gmac_dump_dma_regs,
+ .dma_mode = gmac_dma_operation_mode,
+ .dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+ .tx_status = gmac_get_tx_frame_status,
+ .rx_status = gmac_get_rx_frame_status,
+ .get_tx_len = gmac_get_tx_len,
+ .set_filter = gmac_set_filter,
+ .flow_ctrl = gmac_flow_ctrl,
+ .pmt = gmac_pmt,
+ .init_rx_desc = gmac_init_rx_desc,
+ .init_tx_desc = gmac_init_tx_desc,
+ .get_tx_owner = gmac_get_tx_owner,
+ .get_rx_owner = gmac_get_rx_owner,
+ .release_tx_desc = gmac_release_tx_desc,
+ .prepare_tx_desc = gmac_prepare_tx_desc,
+ .clear_tx_ic = gmac_clear_tx_ic,
+ .close_tx_desc = gmac_close_tx_desc,
+ .get_tx_ls = gmac_get_tx_ls,
+ .set_tx_owner = gmac_set_tx_owner,
+ .set_rx_owner = gmac_set_rx_owner,
+ .get_rx_frame_len = gmac_get_rx_frame_len,
+ .host_irq_status = gmac_irq_status,
+ .disable_rx_ic = gmac_disable_rx_ic,
+ .set_umac_addr = gmac_set_umac_addr,
+ .get_umac_addr = gmac_get_umac_addr,
+};
+
+struct mac_device_info *gmac_setup(unsigned long ioaddr)
+{
+ struct mac_device_info *mac;
+ u32 uid = readl(ioaddr + GMAC_VERSION);
+
+ pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+ ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff));
+
+ mac = kmalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+ memset(mac, 0, sizeof(struct mac_device_info));
+
+ mac->ops = &gmac_driver;
+ mac->hw.pmt = PMT_SUPPORTED;
+ mac->hw.link.port = GMAC_CONTROL_PS;
+ mac->hw.link.duplex = GMAC_CONTROL_DM;
+ mac->hw.link.speed = GMAC_CONTROL_FES;
+ mac->hw.mii.addr = GMAC_MII_ADDR;
+ mac->hw.mii.data = GMAC_MII_DATA;
+
+ return mac;
+}
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
new file mode 100644
index 0000000..684a363
--- /dev/null
+++ b/drivers/net/stmmac/gmac.h
@@ -0,0 +1,204 @@
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#define GMAC_CONTROL 0x00000000 /* Configuration */
+#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */
+#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */
+#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */
+#define GMAC_MII_ADDR 0x00000010 /* MII Address */
+#define GMAC_MII_DATA 0x00000014 /* MII Data */
+#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */
+#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */
+#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */
+#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */
+
+#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */
+enum gmac_irq_status {
+ time_stamp_irq = 0x0200,
+ mmc_rx_csum_offload_irq = 0x0080,
+ mmc_tx_irq = 0x0040,
+ mmc_rx_irq = 0x0020,
+ mmc_irq = 0x0010,
+ pmt_irq = 0x0008,
+ pcs_ane_irq = 0x0004,
+ pcs_link_irq = 0x0002,
+ rgmii_irq = 0x0001,
+};
+#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */
+
+/* PMT Control and Status */
+#define GMAC_PMT 0x0000002c
+enum power_event {
+ pointer_reset = 0x80000000,
+ global_unicast = 0x00000200,
+ wake_up_rx_frame = 0x00000040,
+ magic_frame = 0x00000020,
+ wake_up_frame_en = 0x00000004,
+ magic_pkt_en = 0x00000002,
+ power_down = 0x00000001,
+};
+
+/* GMAC HW ADDR regs */
+#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8))
+#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8))
+#define GMAC_MAX_UNICAST_ADDRESSES 16
+
+#define GMAC_AN_CTRL 0x000000c0 /* AN control */
+#define GMAC_AN_STATUS 0x000000c4 /* AN status */
+#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */
+#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */
+#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */
+#define GMAC_TBI 0x000000d4 /* TBI extend status */
+#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */
+
+/* GMAC Configuration defines */
+#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */
+#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */
+#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */
+#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */
+#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */
+enum inter_frame_gap {
+ GMAC_CONTROL_IFG_88 = 0x00040000,
+ GMAC_CONTROL_IFG_80 = 0x00020000,
+ GMAC_CONTROL_IFG_40 = 0x000e0000,
+};
+#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */
+#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */
+#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */
+#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */
+#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */
+#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */
+#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */
+#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */
+#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */
+#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */
+#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */
+#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
+ GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE)
+
+/* GMAC Frame Filter defines */
+#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
+#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */
+#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */
+#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */
+#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */
+#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */
+#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */
+#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */
+#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */
+#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */
+/* GMII ADDR defines */
+#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */
+#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */
+/* GMAC FLOW CTRL defines */
+#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define GMAC_FLOW_CTRL_PT_SHIFT 16
+#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */
+#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */
+#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
+
+/*--- DMA BLOCK defines ---*/
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+/* Programmable burst length (passed thorugh platform)*/
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+
+enum rx_tx_priority_ratio {
+ double_ratio = 0x00004000, /*2:1 */
+ triple_ratio = 0x00008000, /*3:1 */
+ quadruple_ratio = 0x0000c000, /*4:1 */
+};
+
+#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT 17
+#define DMA_BUS_MODE_USP 0x00800000
+#define DMA_BUS_MODE_4PBL 0x01000000
+#define DMA_BUS_MODE_AAL 0x02000000
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */
+#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */
+/* DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT 14
+#define DMA_BUS_FB 0x00010000 /* Fixed Burst */
+
+/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
+#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
+#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
+/* Theshold for Activating the FC */
+enum rfa {
+ act_full_minus_1 = 0x00800000,
+ act_full_minus_2 = 0x00800200,
+ act_full_minus_3 = 0x00800400,
+ act_full_minus_4 = 0x00800600,
+};
+/* Theshold for Deactivating the FC */
+enum rfd {
+ deac_full_minus_1 = 0x00400000,
+ deac_full_minus_2 = 0x00400800,
+ deac_full_minus_3 = 0x00401000,
+ deac_full_minus_4 = 0x00401800,
+};
+#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */
+#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */
+
+enum ttc_control {
+ DMA_CONTROL_TTC_64 = 0x00000000,
+ DMA_CONTROL_TTC_128 = 0x00004000,
+ DMA_CONTROL_TTC_192 = 0x00008000,
+ DMA_CONTROL_TTC_256 = 0x0000c000,
+ DMA_CONTROL_TTC_40 = 0x00010000,
+ DMA_CONTROL_TTC_32 = 0x00014000,
+ DMA_CONTROL_TTC_24 = 0x00018000,
+ DMA_CONTROL_TTC_16 = 0x0001c000,
+};
+#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff
+
+#define DMA_CONTROL_EFC 0x00000100
+#define DMA_CONTROL_FEF 0x00000080
+#define DMA_CONTROL_FUF 0x00000040
+
+enum rtc_control {
+ DMA_CONTROL_RTC_64 = 0x00000000,
+ DMA_CONTROL_RTC_32 = 0x00000008,
+ DMA_CONTROL_RTC_96 = 0x00000010,
+ DMA_CONTROL_RTC_128 = 0x00000018,
+};
+#define DMA_CONTROL_TC_RX_MASK 0xffffffe7
+
+#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */
+
+/* MMC registers offset */
+#define GMAC_MMC_CTRL 0x100
+#define GMAC_MMC_RX_INTR 0x104
+#define GMAC_MMC_TX_INTR 0x108
+#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208
diff --git a/drivers/net/stmmac/mac100.c b/drivers/net/stmmac/mac100.c
new file mode 100644
index 0000000..5c3c839
--- /dev/null
+++ b/drivers/net/stmmac/mac100.c
@@ -0,0 +1,528 @@
+/*******************************************************************************
+ This is the driver for the MAC 10/100 on-chip Ethernet controller
+ currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
+
+ DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
+ this code.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "common.h"
+#include "mac100.h"
+
+#undef MAC100_DEBUG
+/*#define MAC100_DEBUG*/
+#ifdef MAC100_DEBUG
+#define DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define DBG(fmt, args...) do { } while (0)
+#endif
+
+static void mac100_core_init(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CONTROL);
+
+ writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
+
+#ifdef STMMAC_VLAN_TAG_USED
+ writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
+#endif
+ return;
+}
+
+static void mac100_dump_mac_regs(unsigned long ioaddr)
+{
+ pr_info("\t----------------------------------------------\n"
+ "\t MAC100 CSR (base addr = 0x%8x)\n"
+ "\t----------------------------------------------\n",
+ (unsigned int)ioaddr);
+ pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
+ readl(ioaddr + MAC_CONTROL));
+ pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
+ readl(ioaddr + MAC_ADDR_HIGH));
+ pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
+ readl(ioaddr + MAC_ADDR_LOW));
+ pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
+ MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
+ pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
+ MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
+ pr_info("\tflow control (offset 0x%x): 0x%08x\n",
+ MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
+ pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
+ readl(ioaddr + MAC_VLAN1));
+ pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
+ readl(ioaddr + MAC_VLAN2));
+ pr_info("\n\tMAC management counter registers\n");
+ pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
+ MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
+ pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
+ MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
+ pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
+ MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
+ pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
+ MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
+ pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
+ MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
+ return;
+}
+
+static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+ u32 dma_rx)
+{
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
+ /* DMA SW reset */
+ value |= DMA_BUS_MODE_SFT_RESET;
+ writel(value, ioaddr + DMA_BUS_MODE);
+ do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+ /* Enable Application Access by writing to DMA CSR0 */
+ writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+ ioaddr + DMA_BUS_MODE);
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+ /* The base address of the RX/TX descriptor lists must be written into
+ * DMA CSR3 and CSR4, respectively. */
+ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+ writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+ return 0;
+}
+
+/* Store and Forward capability is not used at all..
+ * The transmit threshold can be programmed by
+ * setting the TTC bits in the DMA control register.*/
+static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode,
+ int rxmode)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+ if (txmode <= 32)
+ csr6 |= DMA_CONTROL_TTC_32;
+ else if (txmode <= 64)
+ csr6 |= DMA_CONTROL_TTC_64;
+ else
+ csr6 |= DMA_CONTROL_TTC_128;
+
+ writel(csr6, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+static void mac100_dump_dma_regs(unsigned long ioaddr)
+{
+ int i;
+
+ DBG(KERN_DEBUG "MAC100 DMA CSR \n");
+ for (i = 0; i < 9; i++)
+ pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
+ (DMA_BUS_MODE + i * 4),
+ readl(ioaddr + DMA_BUS_MODE + i * 4));
+ DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n",
+ DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR));
+ DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n",
+ DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
+ return;
+}
+
+/* DMA controller has two counters to track the number of
+ the receive missed frames. */
+static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr)
+{
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+ u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
+
+ if (unlikely(csr8)) {
+ if (csr8 & DMA_MISSED_FRAME_OVE) {
+ stats->rx_over_errors += 0x800;
+ x->rx_overflow_cntr += 0x800;
+ } else {
+ unsigned int ove_cntr;
+ ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
+ stats->rx_over_errors += ove_cntr;
+ x->rx_overflow_cntr += ove_cntr;
+ }
+
+ if (csr8 & DMA_MISSED_FRAME_OVE_M) {
+ stats->rx_missed_errors += 0xffff;
+ x->rx_missed_cntr += 0xffff;
+ } else {
+ unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
+ stats->rx_missed_errors += miss_f;
+ x->rx_missed_cntr += miss_f;
+ }
+ }
+ return;
+}
+
+static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr)
+{
+ int ret = 0;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.tx.error_summary)) {
+ if (unlikely(p->des01.tx.underflow_error)) {
+ x->tx_underflow++;
+ stats->tx_fifo_errors++;
+ }
+ if (unlikely(p->des01.tx.no_carrier)) {
+ x->tx_carrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.tx.loss_carrier)) {
+ x->tx_losscarrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely((p->des01.tx.excessive_deferral) ||
+ (p->des01.tx.excessive_collisions) ||
+ (p->des01.tx.late_collision)))
+ stats->collisions += p->des01.tx.collision_count;
+ ret = -1;
+ }
+ if (unlikely(p->des01.tx.heartbeat_fail)) {
+ x->tx_heartbeat++;
+ stats->tx_heartbeat_errors++;
+ ret = -1;
+ }
+ if (unlikely(p->des01.tx.deferred))
+ x->tx_deferred++;
+
+ return ret;
+}
+
+static int mac100_get_tx_len(struct dma_desc *p)
+{
+ return p->des01.tx.buffer1_size;
+}
+
+/* This function verifies if each incoming frame has some errors
+ * and, if required, updates the multicast statistics.
+ * In case of success, it returns csum_none becasue the device
+ * is not able to compute the csum in HW. */
+static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p)
+{
+ int ret = csum_none;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.rx.last_descriptor == 0)) {
+ pr_warning("mac100 Error: Oversized Ethernet "
+ "frame spanned multiple buffers\n");
+ stats->rx_length_errors++;
+ return discard_frame;
+ }
+
+ if (unlikely(p->des01.rx.error_summary)) {
+ if (unlikely(p->des01.rx.descriptor_error))
+ x->rx_desc++;
+ if (unlikely(p->des01.rx.partial_frame_error))
+ x->rx_partial++;
+ if (unlikely(p->des01.rx.run_frame))
+ x->rx_runt++;
+ if (unlikely(p->des01.rx.frame_too_long))
+ x->rx_toolong++;
+ if (unlikely(p->des01.rx.collision)) {
+ x->rx_collision++;
+ stats->collisions++;
+ }
+ if (unlikely(p->des01.rx.crc_error)) {
+ x->rx_crc++;
+ stats->rx_crc_errors++;
+ }
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.rx.dribbling))
+ ret = discard_frame;
+
+ if (unlikely(p->des01.rx.length_error)) {
+ x->rx_lenght++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.rx.mii_error)) {
+ x->rx_mii++;
+ ret = discard_frame;
+ }
+ if (p->des01.rx.multicast_frame) {
+ x->rx_multicast++;
+ stats->multicast++;
+ }
+ return ret;
+}
+
+static void mac100_irq_status(unsigned long ioaddr)
+{
+ return;
+}
+
+static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_set_filter(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CONTROL);
+
+ if (dev->flags & IFF_PROMISC) {
+ value |= MAC_CONTROL_PR;
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
+ MAC_CONTROL_HP);
+ } else if ((dev->mc_count > HASH_TABLE_SIZE)
+ || (dev->flags & IFF_ALLMULTI)) {
+ value |= MAC_CONTROL_PM;
+ value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
+ writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
+ writel(0xffffffff, ioaddr + MAC_HASH_LOW);
+ } else if (dev->mc_count == 0) { /* no multicast */
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
+ MAC_CONTROL_HO | MAC_CONTROL_HP);
+ } else {
+ int i;
+ u32 mc_filter[2];
+ struct dev_mc_list *mclist;
+
+ /* Perfect filter mode for physical address and Hash
+ filter for multicast */
+ value |= MAC_CONTROL_HP;
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF
+ | MAC_CONTROL_HO);
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ for (i = 0, mclist = dev->mc_list;
+ mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ /* The upper 6 bits of the calculated CRC are used to
+ * index the contens of the hash table */
+ int bit_nr =
+ ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ /* The most significant bit determines the register to
+ * use (H/L) while the other 5 bits determine the bit
+ * within the register. */
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
+ writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
+ }
+
+ writel(value, ioaddr + MAC_CONTROL);
+
+ DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
+ "HI 0x%08x, LO 0x%08x\n",
+ __func__, readl(ioaddr + MAC_CONTROL),
+ readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
+ return;
+}
+
+static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time)
+{
+ unsigned int flow = MAC_FLOW_CTRL_ENABLE;
+
+ if (duplex)
+ flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
+ writel(flow, ioaddr + MAC_FLOW_CTRL);
+
+ return;
+}
+
+/* No PMT module supported in our SoC for the Ethernet Controller. */
+static void mac100_pmt(unsigned long ioaddr, unsigned long mode)
+{
+ return;
+}
+
+static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.rx.own = 1;
+ p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
+ if (i == ring_size - 1)
+ p->des01.rx.end_ring = 1;
+ p++;
+ }
+ return;
+}
+
+static void mac100_disable_rx_ic(struct dma_desc *p, unsigned int ring_size,
+ int disable_ic)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ if (i % disable_ic)
+ p->des01.rx.disable_ic = 1;
+ p++;
+ }
+ return;
+}
+
+static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.tx.own = 0;
+ if (i == ring_size - 1)
+ p->des01.tx.end_ring = 1;
+ p++;
+ }
+ return;
+}
+
+static int mac100_get_tx_owner(struct dma_desc *p)
+{
+ return p->des01.tx.own;
+}
+
+static int mac100_get_rx_owner(struct dma_desc *p)
+{
+ return p->des01.rx.own;
+}
+
+static void mac100_set_tx_owner(struct dma_desc *p)
+{
+ p->des01.tx.own = 1;
+}
+
+static void mac100_set_rx_owner(struct dma_desc *p)
+{
+ p->des01.rx.own = 1;
+}
+
+static int mac100_get_tx_ls(struct dma_desc *p)
+{
+ return p->des01.tx.last_segment;
+}
+
+static void mac100_release_tx_desc(struct dma_desc *p)
+{
+ int ter = p->des01.tx.end_ring;
+
+ /* clean field used within the xmit */
+ p->des01.tx.first_segment = 0;
+ p->des01.tx.last_segment = 0;
+ p->des01.tx.buffer1_size = 0;
+
+ /* clean status reported */
+ p->des01.tx.error_summary = 0;
+ p->des01.tx.underflow_error = 0;
+ p->des01.tx.no_carrier = 0;
+ p->des01.tx.loss_carrier = 0;
+ p->des01.tx.excessive_deferral = 0;
+ p->des01.tx.excessive_collisions = 0;
+ p->des01.tx.late_collision = 0;
+ p->des01.tx.heartbeat_fail = 0;
+ p->des01.tx.deferred = 0;
+
+ /* set termination field */
+ p->des01.tx.end_ring = ter;
+
+ return;
+}
+
+static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+ int csum_flag)
+{
+ p->des01.tx.first_segment = is_fs;
+ p->des01.tx.buffer1_size = len;
+}
+
+static void mac100_clear_tx_ic(struct dma_desc *p)
+{
+ p->des01.tx.interrupt = 0;
+}
+
+static void mac100_close_tx_desc(struct dma_desc *p)
+{
+ p->des01.tx.last_segment = 1;
+ p->des01.tx.interrupt = 1;
+}
+
+static int mac100_get_rx_frame_len(struct dma_desc *p)
+{
+ return p->des01.rx.frame_length;
+}
+
+struct stmmac_ops mac100_driver = {
+ .core_init = mac100_core_init,
+ .dump_mac_regs = mac100_dump_mac_regs,
+ .dma_init = mac100_dma_init,
+ .dump_dma_regs = mac100_dump_dma_regs,
+ .dma_mode = mac100_dma_operation_mode,
+ .dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+ .tx_status = mac100_get_tx_frame_status,
+ .rx_status = mac100_get_rx_frame_status,
+ .get_tx_len = mac100_get_tx_len,
+ .set_filter = mac100_set_filter,
+ .flow_ctrl = mac100_flow_ctrl,
+ .pmt = mac100_pmt,
+ .init_rx_desc = mac100_init_rx_desc,
+ .init_tx_desc = mac100_init_tx_desc,
+ .get_tx_owner = mac100_get_tx_owner,
+ .get_rx_owner = mac100_get_rx_owner,
+ .release_tx_desc = mac100_release_tx_desc,
+ .prepare_tx_desc = mac100_prepare_tx_desc,
+ .clear_tx_ic = mac100_clear_tx_ic,
+ .close_tx_desc = mac100_close_tx_desc,
+ .get_tx_ls = mac100_get_tx_ls,
+ .set_tx_owner = mac100_set_tx_owner,
+ .set_rx_owner = mac100_set_rx_owner,
+ .get_rx_frame_len = mac100_get_rx_frame_len,
+ .host_irq_status = mac100_irq_status,
+ .disable_rx_ic = mac100_disable_rx_ic,
+ .set_umac_addr = mac100_set_umac_addr,
+ .get_umac_addr = mac100_get_umac_addr,
+};
+
+struct mac_device_info *mac100_setup(unsigned long ioaddr)
+{
+ struct mac_device_info *mac;
+
+ mac = kmalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+ memset(mac, 0, sizeof(struct mac_device_info));
+
+ pr_info("\tMAC 10/100\n");
+
+ mac->ops = &mac100_driver;
+ mac->hw.pmt = PMT_NOT_SUPPORTED;
+ mac->hw.link.port = MAC_CONTROL_PS;
+ mac->hw.link.duplex = MAC_CONTROL_F;
+ mac->hw.link.speed = 0;
+ mac->hw.mii.addr = MAC_MII_ADDR;
+ mac->hw.mii.data = MAC_MII_DATA;
+
+ return mac;
+}
diff --git a/drivers/net/stmmac/mac100.h b/drivers/net/stmmac/mac100.h
new file mode 100644
index 0000000..0f8f110
--- /dev/null
+++ b/drivers/net/stmmac/mac100.h
@@ -0,0 +1,116 @@
+/*******************************************************************************
+ MAC 10/100 Header File
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * MAC BLOCK defines
+ *---------------------------------------------------------------------------*/
+/* MAC CSR offset */
+#define MAC_CONTROL 0x00000000 /* MAC Control */
+#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */
+#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */
+#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */
+#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */
+#define MAC_MII_ADDR 0x00000014 /* MII Address */
+#define MAC_MII_DATA 0x00000018 /* MII Data */
+#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */
+#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */
+#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */
+
+/* MAC CTRL defines */
+#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */
+#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */
+#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */
+#define MAC_CONTROL_PS 0x08000000 /* Port Select */
+#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */
+#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */
+#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */
+#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */
+#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */
+#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */
+#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */
+#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */
+#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */
+#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */
+#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */
+#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */
+#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */
+#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */
+#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */
+#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */
+#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */
+#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */
+#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */
+#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
+
+/* MAC FLOW CTRL defines */
+#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define MAC_FLOW_CTRL_PT_SHIFT 16
+#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */
+#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */
+#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */
+
+/* MII ADDR defines */
+#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */
+#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */
+
+/*----------------------------------------------------------------------------
+ * DMA BLOCK defines
+ *---------------------------------------------------------------------------*/
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */
+#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DEFAULT 0x00000000
+
+/* DMA Control register defines */
+#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */
+
+/* Transmit Threshold Control */
+enum ttc_control {
+ DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */
+ DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */
+ DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */
+ DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */
+ DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */
+ DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */
+ DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */
+ DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */
+ DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */
+ DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */
+};
+
+/* STMAC110 DMA Missed Frame Counter register defines */
+#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */
+#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */
+#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */
+#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
new file mode 100644
index 0000000..a8158df
--- /dev/null
+++ b/drivers/net/stmmac/stmmac.h
@@ -0,0 +1,99 @@
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#define DRV_MODULE_VERSION "Oct_09"
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define STMMAC_VLAN_TAG_USED
+#include <linux/if_vlan.h>
+#endif
+
+#include "common.h"
+#ifdef CONFIG_STMMAC_TIMER
+#include "stmmac_timer.h"
+#endif
+
+struct stmmac_priv {
+ /* Frequently used values are kept adjacent for cache effect */
+ struct dma_desc *dma_tx ____cacheline_aligned;
+ dma_addr_t dma_tx_phy;
+ struct sk_buff **tx_skbuff;
+ unsigned int cur_tx;
+ unsigned int dirty_tx;
+ unsigned int dma_tx_size;
+ spinlock_t tx_lock;
+ int tx_coe;
+ int tx_coalesce;
+
+ struct dma_desc *dma_rx ;
+ unsigned int cur_rx;
+ unsigned int dirty_rx;
+ struct sk_buff **rx_skbuff;
+ dma_addr_t *rx_skbuff_dma;
+ struct sk_buff_head rx_recycle;
+
+ struct net_device *dev;
+ int is_gmac;
+ dma_addr_t dma_rx_phy;
+ unsigned int dma_rx_size;
+ int rx_csum;
+ unsigned int dma_buf_sz;
+ struct device *device;
+ struct mac_device_info *mac_type;
+
+ struct stmmac_extra_stats xstats;
+ struct napi_struct napi;
+
+ phy_interface_t phy_interface;
+ int pbl;
+ int bus_id;
+ int phy_addr;
+ int phy_mask;
+ int (*phy_reset) (void *priv);
+ void (*fix_mac_speed) (void *priv, unsigned int speed);
+ void *bsp_priv;
+
+ int phy_irq;
+ struct phy_device *phydev;
+ int oldlink;
+ int speed;
+ int oldduplex;
+ unsigned int flow_ctrl;
+ unsigned int pause;
+ struct mii_bus *mii;
+
+ u32 msg_enable;
+ spinlock_t lock;
+ int wolopts;
+ int wolenabled;
+ int shutdown;
+#ifdef CONFIG_STMMAC_TIMER
+ struct stmmac_timer *tm;
+#endif
+#ifdef STMMAC_VLAN_TAG_USED
+ struct vlan_group *vlgrp;
+#endif
+};
+
+extern int stmmac_mdio_unregister(struct net_device *ndev);
+extern int stmmac_mdio_register(struct net_device *ndev);
+extern void stmmac_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
new file mode 100644
index 0000000..9d32b2b
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -0,0 +1,393 @@
+/*******************************************************************************
+ STMMAC Ethtool support
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define REG_SPACE_SIZE 0x1054
+#define MAC100_ETHTOOL_NAME "st_mac100"
+#define GMAC_ETHTOOL_NAME "st_gmac"
+
+struct stmmac_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define STMMAC_STAT(m) \
+ { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \
+ offsetof(struct stmmac_priv, xstats.m)}
+
+static const struct stmmac_stats stmmac_gstrings_stats[] = {
+ STMMAC_STAT(tx_underflow),
+ STMMAC_STAT(tx_carrier),
+ STMMAC_STAT(tx_losscarrier),
+ STMMAC_STAT(tx_heartbeat),
+ STMMAC_STAT(tx_deferred),
+ STMMAC_STAT(tx_vlan),
+ STMMAC_STAT(rx_vlan),
+ STMMAC_STAT(tx_jabber),
+ STMMAC_STAT(tx_frame_flushed),
+ STMMAC_STAT(tx_payload_error),
+ STMMAC_STAT(tx_ip_header_error),
+ STMMAC_STAT(rx_desc),
+ STMMAC_STAT(rx_partial),
+ STMMAC_STAT(rx_runt),
+ STMMAC_STAT(rx_toolong),
+ STMMAC_STAT(rx_collision),
+ STMMAC_STAT(rx_crc),
+ STMMAC_STAT(rx_lenght),
+ STMMAC_STAT(rx_mii),
+ STMMAC_STAT(rx_multicast),
+ STMMAC_STAT(rx_gmac_overflow),
+ STMMAC_STAT(rx_watchdog),
+ STMMAC_STAT(da_rx_filter_fail),
+ STMMAC_STAT(sa_rx_filter_fail),
+ STMMAC_STAT(rx_missed_cntr),
+ STMMAC_STAT(rx_overflow_cntr),
+ STMMAC_STAT(tx_undeflow_irq),
+ STMMAC_STAT(tx_process_stopped_irq),
+ STMMAC_STAT(tx_jabber_irq),
+ STMMAC_STAT(rx_overflow_irq),
+ STMMAC_STAT(rx_buf_unav_irq),
+ STMMAC_STAT(rx_process_stopped_irq),
+ STMMAC_STAT(rx_watchdog_irq),
+ STMMAC_STAT(tx_early_irq),
+ STMMAC_STAT(fatal_bus_error_irq),
+ STMMAC_STAT(threshold),
+ STMMAC_STAT(poll_n),
+ STMMAC_STAT(tx_pkt_n),
+ STMMAC_STAT(rx_pkt_n),
+};
+#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
+
+void stmmac_ethtool_getdrvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->is_gmac)
+ strcpy(info->driver, MAC100_ETHTOOL_NAME);
+ else
+ strcpy(info->driver, GMAC_ETHTOOL_NAME);
+
+ strcpy(info->version, DRV_MODULE_VERSION);
+ info->fw_version[0] = '\0';
+ info->n_stats = STMMAC_STATS_LEN;
+ return;
+}
+
+int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phy = priv->phydev;
+ int rc;
+ if (phy == NULL) {
+ pr_err("%s: %s: PHY is not registered\n",
+ __func__, dev->name);
+ return -ENODEV;
+ }
+ if (!netif_running(dev)) {
+ pr_err("%s: interface is disabled: we cannot track "
+ "link speed / duplex setting\n", dev->name);
+ return -EBUSY;
+ }
+ cmd->transceiver = XCVR_INTERNAL;
+ spin_lock_irq(&priv->lock);
+ rc = phy_ethtool_gset(phy, cmd);
+ spin_unlock_irq(&priv->lock);
+ return rc;
+}
+
+int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phy = priv->phydev;
+ int rc;
+
+ spin_lock(&priv->lock);
+ rc = phy_ethtool_sset(phy, cmd);
+ spin_unlock(&priv->lock);
+
+ return rc;
+}
+
+u32 stmmac_ethtool_getmsglevel(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ return priv->msg_enable;
+}
+
+void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ priv->msg_enable = level;
+
+}
+
+int stmmac_check_if_running(struct net_device *dev)
+{
+ if (!netif_running(dev))
+ return -EBUSY;
+ return 0;
+}
+
+int stmmac_ethtool_get_regs_len(struct net_device *dev)
+{
+ return REG_SPACE_SIZE;
+}
+
+void stmmac_ethtool_gregs(struct net_device *dev,
+ struct ethtool_regs *regs, void *space)
+{
+ int i;
+ u32 *reg_space = (u32 *) space;
+
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ memset(reg_space, 0x0, REG_SPACE_SIZE);
+
+ if (!priv->is_gmac) {
+ /* MAC registers */
+ for (i = 0; i < 12; i++)
+ reg_space[i] = readl(dev->base_addr + (i * 4));
+ /* DMA registers */
+ for (i = 0; i < 9; i++)
+ reg_space[i + 12] =
+ readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+ reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR);
+ reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR);
+ } else {
+ /* MAC registers */
+ for (i = 0; i < 55; i++)
+ reg_space[i] = readl(dev->base_addr + (i * 4));
+ /* DMA registers */
+ for (i = 0; i < 22; i++)
+ reg_space[i + 55] =
+ readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+ }
+
+ return;
+}
+
+int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ return priv->rx_csum;
+}
+
+static void
+stmmac_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct stmmac_priv *priv = netdev_priv(netdev);
+
+ spin_lock(&priv->lock);
+
+ pause->rx_pause = 0;
+ pause->tx_pause = 0;
+ pause->autoneg = priv->phydev->autoneg;
+
+ if (priv->flow_ctrl & FLOW_RX)
+ pause->rx_pause = 1;
+ if (priv->flow_ctrl & FLOW_TX)
+ pause->tx_pause = 1;
+
+ spin_unlock(&priv->lock);
+ return;
+}
+
+static int
+stmmac_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct stmmac_priv *priv = netdev_priv(netdev);
+ struct phy_device *phy = priv->phydev;
+ int new_pause = FLOW_OFF;
+ int ret = 0;
+
+ spin_lock(&priv->lock);
+
+ if (pause->rx_pause)
+ new_pause |= FLOW_RX;
+ if (pause->tx_pause)
+ new_pause |= FLOW_TX;
+
+ priv->flow_ctrl = new_pause;
+
+ if (phy->autoneg) {
+ if (netif_running(netdev)) {
+ struct ethtool_cmd cmd;
+ /* auto-negotiation automatically restarted */
+ cmd.cmd = ETHTOOL_NWAY_RST;
+ cmd.supported = phy->supported;
+ cmd.advertising = phy->advertising;
+ cmd.autoneg = phy->autoneg;
+ cmd.speed = phy->speed;
+ cmd.duplex = phy->duplex;
+ cmd.phy_address = phy->addr;
+ ret = phy_ethtool_sset(phy, &cmd);
+ }
+ } else {
+ unsigned long ioaddr = netdev->base_addr;
+ priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex,
+ priv->flow_ctrl, priv->pause);
+ }
+ spin_unlock(&priv->lock);
+ return ret;
+}
+
+static void stmmac_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *dummy, u64 *data)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int i;
+
+ /* Update HW stats if supported */
+ priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats,
+ ioaddr);
+
+ for (i = 0; i < STMMAC_STATS_LEN; i++) {
+ char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
+ data[i] = (stmmac_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p);
+ }
+
+ return;
+}
+
+static int stmmac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return STMMAC_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ int i;
+ u8 *p = data;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < STMMAC_STATS_LEN; i++) {
+ memcpy(p, stmmac_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+ return;
+}
+
+/* Currently only support WOL through Magic packet. */
+static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock_irq(&priv->lock);
+ if (priv->wolenabled == PMT_SUPPORTED) {
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = priv->wolopts;
+ }
+ spin_unlock_irq(&priv->lock);
+}
+
+static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ u32 support = WAKE_MAGIC;
+
+ if (priv->wolenabled == PMT_NOT_SUPPORTED)
+ return -EINVAL;
+
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ if (wol->wolopts == 0)
+ device_set_wakeup_enable(priv->device, 0);
+ else
+ device_set_wakeup_enable(priv->device, 1);
+
+ spin_lock_irq(&priv->lock);
+ priv->wolopts = wol->wolopts;
+ spin_unlock_irq(&priv->lock);
+
+ return 0;
+}
+
+static struct ethtool_ops stmmac_ethtool_ops = {
+ .begin = stmmac_check_if_running,
+ .get_drvinfo = stmmac_ethtool_getdrvinfo,
+ .get_settings = stmmac_ethtool_getsettings,
+ .set_settings = stmmac_ethtool_setsettings,
+ .get_msglevel = stmmac_ethtool_getmsglevel,
+ .set_msglevel = stmmac_ethtool_setmsglevel,
+ .get_regs = stmmac_ethtool_gregs,
+ .get_regs_len = stmmac_ethtool_get_regs_len,
+ .get_link = ethtool_op_get_link,
+ .get_rx_csum = stmmac_ethtool_get_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = stmmac_ethtool_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_pauseparam = stmmac_get_pauseparam,
+ .set_pauseparam = stmmac_set_pauseparam,
+ .get_ethtool_stats = stmmac_get_ethtool_stats,
+ .get_strings = stmmac_get_strings,
+ .get_wol = stmmac_get_wol,
+ .set_wol = stmmac_set_wol,
+ .get_sset_count = stmmac_get_sset_count,
+#ifdef NETIF_F_TSO
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+#endif
+};
+
+void stmmac_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops);
+}
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
new file mode 100644
index 0000000..1b1128d
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -0,0 +1,2322 @@
+/*******************************************************************************
+ This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
+ ST Ethernet IPs are built around a Synopsys IP Core.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+
+ Documentation available at:
+ http://www.stlinux.com
+ Support available at:
+ https://bugzilla.stlinux.com/
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
+#include <linux/stm/soc.h>
+#include "stmmac.h"
+
+#define STMMAC_RESOURCE_NAME "stmmaceth"
+#define PHY_RESOURCE_NAME "stmmacphy"
+
+#undef STMMAC_DEBUG
+/*#define STMMAC_DEBUG*/
+#ifdef STMMAC_DEBUG
+#define DBG(nlevel, klevel, fmt, args...) \
+ ((void)(netif_msg_##nlevel(priv) && \
+ printk(KERN_##klevel fmt, ## args)))
+#else
+#define DBG(nlevel, klevel, fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_RX_DEBUG
+/*#define STMMAC_RX_DEBUG*/
+#ifdef STMMAC_RX_DEBUG
+#define RX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define RX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_XMIT_DEBUG
+/*#define STMMAC_XMIT_DEBUG*/
+#ifdef STMMAC_TX_DEBUG
+#define TX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define TX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
+#define STMMAC_IP_ALIGN NET_IP_ALIGN
+#define JUMBO_LEN 9000
+
+/* Module parameters */
+#define TX_TIMEO 5000 /* default 5 seconds */
+static int watchdog = TX_TIMEO;
+module_param(watchdog, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
+
+static int debug = -1; /* -1: default, 0: no output, 16: all */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
+
+static int phyaddr = -1;
+module_param(phyaddr, int, S_IRUGO);
+MODULE_PARM_DESC(phyaddr, "Physical device address");
+
+#define DMA_TX_SIZE 256
+static int dma_txsize = DMA_TX_SIZE;
+module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
+
+#define DMA_RX_SIZE 256
+static int dma_rxsize = DMA_RX_SIZE;
+module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
+
+static int flow_ctrl = FLOW_OFF;
+module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
+
+static int pause = PAUSE_TIME;
+module_param(pause, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pause, "Flow Control Pause Time");
+
+#define TC_DEFAULT 64
+static int tc = TC_DEFAULT;
+module_param(tc, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tc, "DMA threshold control value");
+
+#define RX_NO_COALESCE 1 /* Always interrupt on completion */
+#define TX_NO_COALESCE -1 /* No moderation by default */
+
+/* It makes sense to combine interrupt coalescence when the timer is enabled
+ * to avoid adverse effects on timing and make safe the TCP traffic.*/
+static int rx_coalesce = RX_NO_COALESCE;
+module_param(rx_coalesce, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx_coalesce, "Rx irq coalescence parameter");
+
+static int tx_coalesce = TX_NO_COALESCE;
+module_param(tx_coalesce, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_coalesce, "Tx irq coalescence parameter");
+
+/* Pay attention to tune this parameter; take care of both
+ * hardware capability and network stabitily/performance impact.
+ * Many tests showed that ~4ms latency seems to be good enough. */
+#ifdef CONFIG_STMMAC_TIMER
+#define DEFAULT_PERIODIC_RATE 256
+static int tmrate = DEFAULT_PERIODIC_RATE;
+module_param(tmrate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
+#endif
+
+#define DMA_BUFFER_SIZE BUF_SIZE_2KiB
+static int buf_sz = DMA_BUFFER_SIZE;
+module_param(buf_sz, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+
+/* In case of Giga ETH, we can enable/disable the COE for the
+ * transmit HW checksum computation.
+ * Note that, if tx csum is off in HW, SG will be still supported. */
+static int tx_coe = HW_CSUM;
+module_param(tx_coe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_IFUP |
+ NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+/**
+ * stmmac_init_coalescence - initialise the coalescence parameters
+ * @gmac: device type.
+ * @mtu: Maximum Transfer Unit.
+ * Description: this function initialises the coalescence parameters
+ * used for mitigating the transmit and receive interrupts.
+ * These default has been selected after performing several benchmark on
+ * ST embedded platform. They try to reduce the CPU usage and
+ * maximise the throughput. GMAC and MAC10/100 use different setting.
+ * TODO: dynamic setting.
+ */
+static void stmmac_init_coalescence(int gmac, int mtu)
+{
+#ifdef CONFIG_STMMAC_TIMER
+ /* Skip the default in case we pass rx/tx_coalesce. */
+ if ((rx_coalesce != RX_NO_COALESCE) || (tx_coalesce != TX_NO_COALESCE))
+ return;
+
+ if (gmac) {
+ rx_coalesce = 32;
+ tx_coalesce = 64;
+
+ if (unlikely(mtu > ETH_DATA_LEN)) {
+ /* Tests on oversized frames showed that it's better to
+ * reduce the coalescence values to get the max
+ * throughput. */
+ rx_coalesce = 4;
+ tx_coalesce = 4;
+ }
+ } else {
+ rx_coalesce = 16;
+ tx_coalesce = 32;
+ }
+#endif
+}
+
+/**
+ * stmmac_verify_args - verify the driver parameters.
+ * Description: it verifies if some wrong parameter is passed to the driver.
+ * Note that wrong parameters are replaced with the default values.
+ */
+static void stmmac_verify_args(void)
+{
+ if (unlikely(watchdog < 0))
+ watchdog = TX_TIMEO;
+ if (unlikely(dma_rxsize < 0))
+ dma_rxsize = DMA_RX_SIZE;
+ if (unlikely(dma_txsize < 0))
+ dma_txsize = DMA_TX_SIZE;
+ if (unlikely(tx_coalesce >= (dma_txsize)))
+ tx_coalesce = TX_NO_COALESCE;
+ if (unlikely(rx_coalesce > (dma_rxsize)))
+ rx_coalesce = RX_NO_COALESCE;
+ if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
+ buf_sz = DMA_BUFFER_SIZE;
+ if (unlikely(flow_ctrl > 1))
+ flow_ctrl = FLOW_AUTO;
+ else if (likely(flow_ctrl < 0))
+ flow_ctrl = FLOW_OFF;
+ if (unlikely((pause < 0) || (pause > 0xffff)))
+ pause = PAUSE_TIME;
+
+ return;
+}
+
+#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
+static void print_pkt(unsigned char *buf, int len)
+{
+ int j;
+ pr_info("len = %d byte, buf addr: 0x%p", len, buf);
+ for (j = 0; j < len; j++) {
+ if ((j % 16) == 0)
+ pr_info("\n %03x:", j);
+ pr_info(" %02x", buf[j]);
+ }
+ pr_info("\n");
+ return;
+}
+#endif
+
+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
+{
+ return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
+}
+
+/**
+ * stmmac_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void stmmac_adjust_link(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phydev;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+ int new_state = 0;
+ unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
+
+ if (phydev == NULL)
+ return;
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n",
+ phydev->addr, phydev->link);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (phydev->link) {
+ u32 ctrl = readl(ioaddr + MAC_CTRL_REG);
+
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~priv->mac_type->hw.link.duplex;
+ else
+ ctrl |= priv->mac_type->hw.link.duplex;
+ priv->oldduplex = phydev->duplex;
+ }
+ /* Flow Control operation */
+ if (phydev->pause)
+ priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex,
+ fc, pause_time);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 1000:
+ if (likely(priv->is_gmac))
+ ctrl &= ~priv->mac_type->hw.link.port;
+ break;
+ case 100:
+ case 10:
+ if (priv->is_gmac) {
+ ctrl |= priv->mac_type->hw.link.port;
+ if (phydev->speed == SPEED_100) {
+ ctrl |=
+ priv->mac_type->hw.link.
+ speed;
+ } else {
+ ctrl &=
+ ~(priv->mac_type->hw.
+ link.speed);
+ }
+ } else {
+ ctrl &= ~priv->mac_type->hw.link.port;
+ }
+ priv->fix_mac_speed(priv->bsp_priv,
+ phydev->speed);
+ break;
+ default:
+ if (netif_msg_link(priv))
+ pr_warning("%s: Speed (%d) is not 10"
+ " or 100!\n", dev->name, phydev->speed);
+ break;
+ }
+
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, ioaddr + MAC_CTRL_REG);
+
+ if (!priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 1;
+ }
+ } else if (priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+ }
+
+ if (new_state && netif_msg_link(priv))
+ phy_print_status(phydev);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
+}
+
+/**
+ * stmmac_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ * Return value:
+ * 0 on success
+ */
+static int stmmac_init_phy(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE]; /* PHY to connect */
+ char bus_id[BUS_ID_SIZE];
+
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+
+ if (priv->phy_addr == -1) {
+ /* We don't have a PHY, so do nothing */
+ return 0;
+ }
+
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
+
+ phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
+ priv->phy_interface);
+
+ if (IS_ERR(phydev)) {
+ pr_err("%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /*
+ * Broken HW is sometimes missing the pull-up resistor on the
+ * MDIO line, which results in reads to non-existent devices returning
+ * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+ * device as well.
+ * Note: phydev->phy_id is the result of reading the UID PHY registers.
+ */
+ if (phydev->phy_id == 0) {
+ phy_disconnect(phydev);
+ return -ENODEV;
+ }
+ pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
+ " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
+
+ priv->phydev = phydev;
+
+ return 0;
+}
+
+/**
+ * stmmac_mac_enable_rx
+ * @dev: net device structure
+ * Description: set the RE (receive enable bit into the MAC CTRL register).
+ */
+static void stmmac_mac_enable_rx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+
+ value |= MAC_RNABLE_RX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+ return;
+}
+
+/**
+ * stmmac_mac_enable_tx
+ * @dev: net device structure
+ * Description: set the TE (transmit enable bit into the MAC CTRL register).
+ */
+static void stmmac_mac_enable_tx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+
+ value |= MAC_ENABLE_TX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+ return;
+}
+
+/**
+ * stmmac_mac_disable_rx
+ * @dev: net device structure
+ * Description: disable the RE bit into the MAC CTRL register.
+ */
+static void stmmac_mac_disable_rx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+
+ value &= ~MAC_RNABLE_RX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+ return;
+}
+
+/**
+ * stmmac_mac_disable_tx
+ * @dev: net device structure
+ * Description: disable the TE bit into the MAC CTRL register.
+ */
+static void stmmac_mac_disable_tx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+
+ value &= ~MAC_ENABLE_TX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+ return;
+}
+
+/**
+ * display_ring
+ * @p: pointer to the ring.
+ * @size: size of the ring.
+ * Description: display all the descriptors within the ring.
+ */
+static void display_ring(struct dma_desc *p, int size)
+{
+ struct tmp_s {
+ u64 a;
+ unsigned int b;
+ unsigned int c;
+ };
+ int i;
+ for (i = 0; i < size; i++) {
+ struct tmp_s *x = (struct tmp_s *)(p + i);
+ pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
+ i, (unsigned int)virt_to_phys(&p[i]),
+ (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
+ x->b, x->c);
+ pr_info("\n");
+ }
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description: this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers.
+ */
+static void init_dma_desc_rings(struct net_device *dev)
+{
+ int i;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int bfsize = priv->dma_buf_sz;
+ int buff2_needed = 0;
+
+ /* Set the Buffer size according to the MTU;
+ * indeed, in case of jumbo we need to bump-up the buffer sizes.
+ */
+ if (unlikely(dev->mtu >= BUF_SIZE_8KiB))
+ bfsize = BUF_SIZE_16KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_4KiB))
+ bfsize = BUF_SIZE_8KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_2KiB))
+ bfsize = BUF_SIZE_4KiB;
+ else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE))
+ bfsize = BUF_SIZE_2KiB;
+ else
+ bfsize = DMA_BUFFER_SIZE;
+
+ /* If the MTU exceeds 8k so use the second buffer in the chain */
+ if (bfsize >= BUF_SIZE_8KiB)
+ buff2_needed = 1;
+
+ DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
+ txsize, rxsize, bfsize);
+
+ priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
+ priv->rx_skbuff =
+ kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
+ priv->dma_rx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ rxsize *
+ sizeof(struct dma_desc),
+ &priv->dma_rx_phy,
+ GFP_KERNEL);
+ priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
+ GFP_KERNEL);
+ priv->dma_tx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ txsize *
+ sizeof(struct dma_desc),
+ &priv->dma_tx_phy,
+ GFP_KERNEL);
+
+ if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
+ pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
+ return;
+ }
+
+ DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, "
+ "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
+ dev->name, priv->dma_rx, priv->dma_tx,
+ (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
+
+ /* RX INITIALIZATION */
+ DBG(probe, INFO, "stmmac: SKB addresses:\n"
+ "skb\t\tskb data\tdma data\n");
+
+ for (i = 0; i < rxsize; i++) {
+ struct dma_desc *p = priv->dma_rx + i;
+
+ skb = netdev_alloc_skb(dev, bfsize);
+ if (unlikely(skb == NULL)) {
+ pr_err("%s: Rx init fails; skb is NULL\n",
+ __func__);
+ break;
+ }
+ skb_reserve(skb, STMMAC_IP_ALIGN);
+
+ priv->rx_skbuff[i] = skb;
+ priv->rx_skbuff_dma[i] = dma_map_single(priv->device,
+ skb->data,
+ bfsize - STMMAC_IP_ALIGN,
+ DMA_FROM_DEVICE);
+ p->des2 = priv->rx_skbuff_dma[i];
+ if (unlikely(buff2_needed))
+ p->des3 = p->des2 + BUF_SIZE_8KiB;
+ DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
+ priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
+ }
+ priv->cur_rx = 0;
+ priv->dirty_rx = (unsigned int)(i - rxsize);
+ priv->dma_buf_sz = bfsize;
+ buf_sz = bfsize;
+
+ /* TX INITIALIZATION */
+ for (i = 0; i < txsize; i++) {
+ priv->tx_skbuff[i] = NULL;
+ priv->dma_tx[i].des2 = 0;
+ }
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize);
+ priv->mac_type->ops->disable_rx_ic(priv->dma_rx, rxsize, rx_coalesce);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize);
+
+ if (netif_msg_hw(priv)) {
+ pr_info("RX descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ pr_info("TX descriptor ring:\n");
+ display_ring(priv->dma_tx, txsize);
+ }
+ return;
+}
+
+/**
+ * dma_free_rx_skbufs
+ * @dev: net device structure
+ * Description: this function frees all the skbuffs in the Rx queue.
+ */
+static void dma_free_rx_skbufs(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < priv->dma_rx_size; i++) {
+ if (priv->rx_skbuff[i]) {
+ dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+ dev_kfree_skb(priv->rx_skbuff[i]);
+ }
+ priv->rx_skbuff[i] = NULL;
+ }
+ return;
+}
+
+/**
+ * dma_free_tx_skbufs
+ * @dev: net device structure
+ * Description: this function frees all the skbuffs in the Tx queue.
+ */
+static void dma_free_tx_skbufs(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < priv->dma_tx_size; i++) {
+ if (priv->tx_skbuff[i] != NULL) {
+ struct dma_desc *p = priv->dma_tx + i;
+ if (p->des2)
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(priv->tx_skbuff[i]);
+ priv->tx_skbuff[i] = NULL;
+ }
+ }
+ return;
+}
+
+/**
+ * free_dma_desc_resources
+ * @dev: net device structure
+ * Description: this function releases and free the DMA resources.
+ */
+static void free_dma_desc_resources(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Release the DMA TX/RX socket buffers */
+ dma_free_rx_skbufs(dev);
+ dma_free_tx_skbufs(dev);
+
+ /* Free the region of consistent memory previously allocated for
+ * the DMA */
+ dma_free_coherent(priv->device,
+ priv->dma_tx_size * sizeof(struct dma_desc),
+ priv->dma_tx, priv->dma_tx_phy);
+ dma_free_coherent(priv->device,
+ priv->dma_rx_size * sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ kfree(priv->rx_skbuff_dma);
+ kfree(priv->rx_skbuff);
+ kfree(priv->tx_skbuff);
+
+ return;
+}
+
+/**
+ * stmmac_dma_start_tx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA tx process.
+ */
+static void stmmac_dma_start_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+static void stmmac_dma_stop_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+/**
+ * stmmac_dma_start_rx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA rx process.
+ */
+static void stmmac_dma_start_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+static void stmmac_dma_stop_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+/**
+ * stmmac_dma_operation_mode - HW DMA operation mode
+ * @dev : pointer to the device structure.
+ * Description: it sets the DMA operation mode: tx/rx DMA thresholds
+ * or Store-And-Forward capability. It also verifies the COE for the
+ * transmission in case of Giga ETH.
+ */
+static void stmmac_dma_operation_mode(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->is_gmac) {
+ /* MAC 10/100 */
+ priv->mac_type->ops->dma_mode(dev->base_addr, tc, 0);
+ priv->tx_coe = NO_HW_CSUM;
+ } else {
+ if ((dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
+ priv->mac_type->ops->dma_mode(dev->base_addr,
+ SF_DMA_MODE, SF_DMA_MODE);
+ tc = SF_DMA_MODE;
+ priv->tx_coe = HW_CSUM;
+ } else {
+ /* Checksum computation is performed in software. */
+ priv->mac_type->ops->dma_mode(dev->base_addr, tc,
+ SF_DMA_MODE);
+ priv->tx_coe = NO_HW_CSUM;
+ }
+ }
+ tx_coe = priv->tx_coe;
+
+ return;
+}
+
+static inline void stmmac_dma_enable_irq_rx(unsigned long ioaddr)
+{
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+ return;
+}
+
+static inline void stmmac_dma_disable_irq_rx(unsigned long ioaddr)
+{
+ writel(DMA_INTR_NO_RX, ioaddr + DMA_INTR_ENA);
+ return;
+}
+
+#ifdef STMMAC_DEBUG
+/**
+ * show_tx_process_state
+ * @status: tx descriptor status field
+ * Description: it shows the Transmit Process State for CSR5[22:20]
+ */
+static void show_tx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- TX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- TX (Running):Fetching the Tx desc\n");
+ break;
+ case 2:
+ pr_info("- TX (Running): Waiting for end of tx\n");
+ break;
+ case 3:
+ pr_info("- TX (Running): Reading the data "
+ "and queuing the data into the Tx buf\n");
+ break;
+ case 6:
+ pr_info("- TX (Suspended): Tx Buff Underflow "
+ "or an unavailable Transmit descriptor\n");
+ break;
+ case 7:
+ pr_info("- TX (Running): Closing Tx descriptor\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**
+ * show_rx_process_state
+ * @status: rx descriptor status field
+ * Description: it shows the Receive Process State for CSR5[19:17]
+ */
+static void show_rx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- RX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- RX (Running): Fetching the Rx desc\n");
+ break;
+ case 2:
+ pr_info("- RX (Running):Checking for end of pkt\n");
+ break;
+ case 3:
+ pr_info("- RX (Running): Waiting for Rx pkt\n");
+ break;
+ case 4:
+ pr_info("- RX (Suspended): Unavailable Rx buf\n");
+ break;
+ case 5:
+ pr_info("- RX (Running): Closing Rx descriptor\n");
+ break;
+ case 6:
+ pr_info("- RX(Running): Flushing the current frame"
+ " from the Rx buf\n");
+ break;
+ case 7:
+ pr_info("- RX (Running): Queuing the Rx frame"
+ " from the Rx buf into memory\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+#endif
+
+/**
+ * stmmac_tx:
+ * @dev: net device structure
+ * Description: it cleans resources after the transmission completes.
+ */
+static int stmmac_clean_tx(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int entry = priv->dirty_tx % txsize;
+ unsigned int count = 0;
+
+ spin_lock(&priv->tx_lock);
+ while (priv->dirty_tx != priv->cur_tx) {
+ int last;
+ struct sk_buff *skb = priv->tx_skbuff[entry];
+ struct dma_desc *p = priv->dma_tx + entry;
+
+ if (priv->mac_type->ops->get_tx_owner(p))
+ break;
+
+ count++;
+
+ /* verify tx error by looking at the last segment */
+ last = priv->mac_type->ops->get_tx_ls(p);
+ if (likely(last)) {
+ int tx_error =
+ priv->mac_type->ops->tx_status(&dev->stats,
+ &priv->xstats,
+ p, ioaddr);
+ if (likely(tx_error == 0)) {
+ dev->stats.tx_packets++;
+ priv->xstats.tx_pkt_n++;
+ } else
+ dev->stats.tx_errors++;
+ }
+ DBG(intr, DEBUG, "stmmac_tx: curr %d, dirty %d\n",
+ priv->cur_tx, priv->dirty_tx);
+
+ if (likely(p->des2))
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ if (unlikely(p->des3))
+ p->des3 = 0;
+
+ if (skb != NULL) {
+ /*
+ * If there's room in the queue (limit it to size)
+ * we add this skb back into the pool,
+ * if it's the right size.
+ */
+ if ((skb_queue_len(&priv->rx_recycle) <
+ priv->dma_rx_size) &&
+ skb_recycle_check(skb, priv->dma_buf_sz))
+ __skb_queue_head(&priv->rx_recycle, skb);
+ else
+ dev_kfree_skb_any(skb);
+
+ priv->tx_skbuff[entry] = NULL;
+ }
+
+ priv->mac_type->ops->release_tx_desc(p);
+
+ entry = (++priv->dirty_tx) % txsize;
+ }
+ if (unlikely(netif_queue_stopped(dev) &&
+ stmmac_tx_avail(priv) > (MAX_SKB_FRAGS + 1)))
+ netif_wake_queue(dev);
+
+ spin_unlock(&priv->tx_lock);
+ return count;
+}
+
+static inline void _stmmac_schedule(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ stmmac_dma_disable_irq_rx(dev->base_addr);
+ napi_schedule(&priv->napi);
+}
+
+#ifdef CONFIG_STMMAC_TIMER
+void stmmac_schedule(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int rxentry = priv->cur_rx % priv->dma_rx_size;
+ unsigned int txentry = priv->dirty_tx % priv->dma_tx_size;
+ int rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx + rxentry);
+ int txret = priv->mac_type->ops->get_tx_owner(priv->dma_tx + txentry);
+
+ if ((rxret == 0) || (txret == 0))
+ _stmmac_schedule(dev);
+
+ return;
+}
+
+static void stmmac_no_timer_started(unsigned int x)
+{;
+};
+
+static void stmmac_no_timer_stopped(void)
+{;
+};
+#endif
+
+/**
+ * stmmac_tx_err:
+ * @dev: net device structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void stmmac_tx_err(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->tx_lock);
+
+ netif_stop_queue(dev);
+
+ stmmac_dma_stop_tx(dev->base_addr);
+ dma_free_tx_skbufs(dev);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+ stmmac_dma_start_tx(dev->base_addr);
+
+ dev->stats.tx_errors++;
+ netif_wake_queue(dev);
+
+ spin_unlock(&priv->tx_lock);
+ return;
+}
+
+/**
+ * stmmac_dma_interrupt - Interrupt handler for the driver
+ * @dev: net device structure
+ * Description: Interrupt handler for the driver (DMA).
+ */
+static void stmmac_dma_interrupt(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ /* read the status register (CSR5) */
+ u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+ DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+
+#ifdef STMMAC_DEBUG
+ /* It displays the DMA transmit process state (CSR5 register) */
+ if (netif_msg_tx_done(priv))
+ show_tx_process_state(intr_status);
+ if (netif_msg_rx_status(priv))
+ show_rx_process_state(intr_status);
+#endif
+ /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+ writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+ /* ABNORMAL interrupts */
+ if (unlikely(intr_status & DMA_STATUS_AIS)) {
+ DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+ if (unlikely(intr_status & DMA_STATUS_UNF)) {
+ DBG(intr, INFO, "transmit underflow\n");
+ if (unlikely(tc != SF_DMA_MODE)
+ && (tc <= 256)) {
+ /* Try to bump up the threshold */
+ tc += 64;
+ priv->mac_type->ops->dma_mode(ioaddr, tc,
+ SF_DMA_MODE);
+ priv->xstats.threshold = tc;
+ }
+ stmmac_tx_err(dev);
+ priv->xstats.tx_undeflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TJT)) {
+ DBG(intr, INFO, "transmit jabber\n");
+ priv->xstats.tx_jabber_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_OVF)) {
+ DBG(intr, INFO, "recv overflow\n");
+ priv->xstats.rx_overflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RU)) {
+ DBG(intr, INFO, "receive buffer unavailable\n");
+ priv->xstats.rx_buf_unav_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RPS)) {
+ DBG(intr, INFO, "receive process stopped\n");
+ priv->xstats.rx_process_stopped_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RWT)) {
+ DBG(intr, INFO, "receive watchdog\n");
+ priv->xstats.rx_watchdog_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_ETI)) {
+ DBG(intr, INFO, "transmit early interrupt\n");
+ priv->xstats.tx_early_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TPS)) {
+ DBG(intr, INFO, "transmit process stopped\n");
+ priv->xstats.tx_process_stopped_irq++;
+ stmmac_tx_err(dev);
+ }
+ if (unlikely(intr_status & DMA_STATUS_FBI)) {
+ DBG(intr, INFO, "fatal bus error\n");
+ priv->xstats.fatal_bus_error_irq++;
+ stmmac_tx_err(dev);
+ }
+ }
+
+ /* TX/RX NORMAL interrupts */
+ if (likely((intr_status & DMA_STATUS_RI) ||
+ (intr_status & (DMA_STATUS_TI))))
+ _stmmac_schedule(dev);
+
+ /* Optional hardware blocks, interrupts should be disabled */
+ if (unlikely(intr_status &
+ (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+ pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+
+ DBG(intr, INFO, "\n\n");
+
+ return;
+}
+
+/**
+ * stmmac_open - open entry point of the driver
+ * @dev : pointer to the device structure.
+ * Description:
+ * This function is the open entry point of the driver.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_open(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ /* Check that the MAC address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using the following linux command:
+ * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ random_ether_addr(dev->dev_addr);
+ pr_warning("%s: generated random MAC address %pM\n", dev->name,
+ dev->dev_addr);
+ }
+
+ stmmac_verify_args();
+
+ ret = stmmac_init_phy(dev);
+ if (unlikely(ret)) {
+ pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
+ return ret;
+ }
+
+ /* Request the IRQ lines */
+ ret = request_irq(dev->irq, &stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
+ __func__, dev->irq, ret);
+ return ret;
+ }
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+ if (unlikely(priv->tm == NULL)) {
+ pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
+ return -ENOMEM;
+ }
+ priv->tm->freq = tmrate;
+
+ /* Test if the HW timer can be actually used.
+ * In case of failure continue with no timer. */
+ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
+ pr_warning("stmmaceth: cannot attach the HW timer\n");
+ rx_coalesce = 1;
+ tmrate = 0;
+ priv->tm->freq = 0;
+ priv->tm->timer_start = stmmac_no_timer_started;
+ priv->tm->timer_stop = stmmac_no_timer_stopped;
+ }
+#endif
+
+ /* Create and initialize the TX/RX descriptors chains. */
+ priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
+ priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
+ priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+ init_dma_desc_rings(dev);
+
+ /* DMA initialization and SW reset */
+ if (unlikely(priv->mac_type->ops->dma_init(ioaddr,
+ priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) {
+
+ pr_err("%s: DMA initialization failed\n", __func__);
+ return -1;
+ }
+
+ /* Copy the MAC addr into the HW */
+ priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+ /* Initialize the MAC Core */
+ priv->mac_type->ops->core_init(ioaddr);
+
+ priv->tx_coalesce = 0;
+ priv->shutdown = 0;
+
+ /* Initialise the MMC (if present) to disable all interrupts. */
+ writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK);
+ writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK);
+
+ /* Enable the MAC Rx/Tx */
+ stmmac_mac_enable_rx(dev);
+ stmmac_mac_enable_tx(dev);
+
+ /* Set the HW DMA mode and the COE */
+ stmmac_dma_operation_mode(dev);
+
+ /* Extra statistics */
+ memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+ priv->xstats.threshold = tc;
+
+ /* Start the ball rolling... */
+ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ /* Dump DMA/MAC registers */
+ if (netif_msg_hw(priv)) {
+ priv->mac_type->ops->dump_mac_regs(ioaddr);
+ priv->mac_type->ops->dump_dma_regs(ioaddr);
+ }
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ napi_enable(&priv->napi);
+ skb_queue_head_init(&priv->rx_recycle);
+ netif_start_queue(dev);
+ return 0;
+}
+
+/**
+ * stmmac_release - close entry point of the driver
+ * @dev : device pointer.
+ * Description:
+ * This is the stop entry point of the driver.
+ */
+static int stmmac_release(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Stop and disconnect the PHY */
+ if (priv->phydev) {
+ phy_stop(priv->phydev);
+ phy_disconnect(priv->phydev);
+ priv->phydev = NULL;
+ }
+
+ netif_stop_queue(dev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ /* Stop and release the timer */
+ stmmac_close_ext_timer();
+ if (priv->tm != NULL)
+ kfree(priv->tm);
+#endif
+ napi_disable(&priv->napi);
+ skb_queue_purge(&priv->rx_recycle);
+
+ /* Free the IRQ lines */
+ free_irq(dev->irq, dev);
+
+ /* Stop TX/RX DMA and clear the descriptors */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+
+ /* Release and free the Rx/Tx resources */
+ free_dma_desc_resources(dev);
+
+ /* Disable the MAC core */
+ stmmac_mac_disable_tx(dev);
+ stmmac_mac_disable_rx(dev);
+
+ netif_carrier_off(dev);
+
+ return 0;
+}
+
+/*
+ * To perform emulated hardware segmentation on skb.
+ */
+static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
+{
+ struct sk_buff *segs, *curr_skb;
+ int gso_segs = skb_shinfo(skb)->gso_segs;
+
+ /* Estimate the number of fragments in the worst case */
+ if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
+ netif_stop_queue(priv->dev);
+ TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
+ __func__);
+ if (stmmac_tx_avail(priv) < gso_segs)
+ return NETDEV_TX_BUSY;
+
+ netif_wake_queue(priv->dev);
+ }
+ TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
+ skb, skb->len);
+
+ segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
+ if (unlikely(IS_ERR(segs)))
+ goto sw_tso_end;
+
+ do {
+ curr_skb = segs;
+ segs = segs->next;
+ TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
+ "*next %p\n", curr_skb->len, curr_skb, segs);
+ curr_skb->next = NULL;
+ stmmac_xmit(curr_skb, priv->dev);
+ } while (segs);
+
+sw_tso_end:
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
+ struct net_device *dev,
+ int csum_insertion)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int nopaged_len = skb_headlen(skb);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry = priv->cur_tx % txsize;
+ struct dma_desc *desc = priv->dma_tx + entry;
+
+ if (nopaged_len > BUF_SIZE_8KiB) {
+
+ int buf2_size = nopaged_len - BUF_SIZE_8KiB;
+
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ BUF_SIZE_8KiB, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
+ csum_insertion);
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ desc->des2 = dma_map_single(priv->device,
+ skb->data + BUF_SIZE_8KiB,
+ buf2_size, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0,
+ buf2_size, csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ priv->tx_skbuff[entry] = NULL;
+ } else {
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+ return entry;
+}
+
+/**
+ * stmmac_xmit:
+ * @skb : the socket buffer
+ * @dev : device pointer
+ * Description : Tx entry point of the driver.
+ */
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry;
+ int i;
+ int ret = NETDEV_TX_OK;
+ int csum_insertion = 0;
+ int nfrags = skb_shinfo(skb)->nr_frags;
+ struct dma_desc *desc, *first;
+
+ if (unlikely(!spin_trylock_irqsave(&priv->tx_lock, flags)))
+ return NETDEV_TX_LOCKED;
+
+ /* This is a hard error log it. */
+ if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
+ netif_stop_queue(dev);
+ pr_err("%s: BUG! Tx Ring full when queue awake\n", __func__);
+ dev->stats.tx_dropped++;
+ ret = NETDEV_TX_BUSY;
+ goto end_xmit;
+ }
+
+ entry = priv->cur_tx % txsize;
+ if (unlikely((priv->tx_skbuff[entry] != NULL))) {
+ pr_err("%s: BUG! Inconsistent Tx skb utilization\n", __func__);
+ dev_kfree_skb_any(skb);
+ dev->stats.tx_dropped++;
+ ret = 1;
+ goto end_xmit;
+ }
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((skb->len > ETH_FRAME_LEN) || nfrags)
+ pr_info("stmmac xmit:\n"
+ "\tskb addr %p - len: %d - nopaged_len: %d\n"
+ "\tn_frags: %d - ip_summed: %d - %s gso\n",
+ skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed,
+ !skb_is_gso(skb) ? "isn't" : "is");
+#endif
+
+ if (unlikely(skb_is_gso(skb))) {
+ ret = stmmac_sw_tso(priv, skb);
+ goto end_xmit;
+ }
+
+ if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
+ if (likely(priv->tx_coe == NO_HW_CSUM))
+ skb_checksum_help(skb);
+ else
+ csum_insertion = 1;
+ }
+
+ desc = priv->dma_tx + entry;
+ first = desc;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
+ pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
+ "\t\tn_frags: %d, ip_summed: %d\n",
+ skb->len, skb_headlen(skb), nfrags, skb->ip_summed);
+#endif
+ priv->tx_skbuff[entry] = skb;
+ if (unlikely(skb->len >= BUF_SIZE_4KiB)) {
+ entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion);
+ desc = priv->dma_tx + entry;
+ } else {
+ unsigned int nopaged_len = skb_headlen(skb);
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+
+ for (i = 0; i < nfrags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ int len = frag->size;
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
+ desc->des2 = dma_map_page(priv->device, frag->page,
+ frag->page_offset,
+ len, DMA_TO_DEVICE);
+ priv->tx_skbuff[entry] = NULL;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0, len,
+ csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ }
+
+ /* Interrupt on completition only for the latest segment */
+ priv->mac_type->ops->close_tx_desc(desc);
+ /* to avoid raise condition */
+ priv->mac_type->ops->set_tx_owner(first);
+
+ priv->cur_tx++;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
+ "first=%p, nfrags=%d\n",
+ (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
+ entry, first, nfrags);
+ display_ring(priv->dma_tx, txsize);
+ pr_info(">>> frame to be transmitted: ");
+ print_pkt(skb->data, skb->len);
+ }
+#endif
+ if (stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1)) {
+ netif_stop_queue(dev);
+ } else {
+ /* Tx interrupts moderation */
+ if (priv->tx_coalesce <= tx_coalesce) {
+ priv->tx_coalesce++;
+ priv->mac_type->ops->clear_tx_ic(desc);
+ } else {
+ priv->tx_coalesce = 0;
+ }
+ }
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* CSR1 enables the transmit DMA to check for new descriptor */
+ writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+
+end_xmit:
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return ret;
+}
+
+static inline void stmmac_rx_refill(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int rxsize = priv->dma_rx_size;
+ int bfsize = priv->dma_buf_sz;
+ struct dma_desc *p = priv->dma_rx;
+
+ for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
+ unsigned int entry = priv->dirty_rx % rxsize;
+ if (likely(priv->rx_skbuff[entry] == NULL)) {
+ struct sk_buff *skb;
+
+ skb = __skb_dequeue(&priv->rx_recycle);
+ if (skb == NULL)
+ skb = netdev_alloc_skb(dev, bfsize);
+
+ if (unlikely(skb == NULL))
+ break;
+
+ skb_reserve(skb, STMMAC_IP_ALIGN);
+ priv->rx_skbuff[entry] = skb;
+ priv->rx_skbuff_dma[entry] =
+ dma_map_single(priv->device, skb->data,
+ bfsize - STMMAC_IP_ALIGN, DMA_FROM_DEVICE);
+ (p + entry)->des2 = priv->rx_skbuff_dma[entry];
+ if (unlikely(priv->is_gmac)) {
+ if (bfsize >= BUF_SIZE_8KiB)
+ (p + entry)->des3 =
+ (p + entry)->des2 + BUF_SIZE_8KiB;
+ }
+ RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
+ }
+ priv->mac_type->ops->set_rx_owner(p + entry);
+ }
+ return;
+}
+
+static int stmmac_rx(struct net_device *dev, int limit)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int entry = priv->cur_rx % rxsize;
+ unsigned int next_entry;
+ unsigned int count = 0;
+ struct dma_desc *p = priv->dma_rx + entry;
+ struct dma_desc *p_next;
+
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_hw(priv)) {
+ pr_debug(">>> stmmac_rx: descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ }
+#endif
+ count = 0;
+ prefetch(p);
+ while (!priv->mac_type->ops->get_rx_owner(p)) {
+ int status;
+
+ if (count >= limit)
+ break;
+
+ count++;
+
+ next_entry = (++priv->cur_rx) % rxsize;
+ p_next = priv->dma_rx + next_entry;
+ prefetch(p_next);
+
+ /* read the status of the incoming frame */
+ status = (priv->mac_type->ops->rx_status(&dev->stats,
+ &priv->xstats, p));
+ if (unlikely(status == discard_frame))
+ dev->stats.rx_errors++;
+ else {
+ struct sk_buff *skb;
+ /* Length should omit the CRC */
+ int frame_len =
+ priv->mac_type->ops->get_rx_frame_len(p) - 4;
+
+#ifdef STMMAC_RX_DEBUG
+ if (frame_len > ETH_FRAME_LEN)
+ pr_debug("\tRX frame size %d, COE status: %d\n",
+ frame_len, status);
+
+ if (netif_msg_hw(priv))
+ pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
+ p, entry, p->des2);
+#endif
+ skb = priv->rx_skbuff[entry];
+ if (unlikely(!skb)) {
+ pr_err("%s: Inconsistent Rx descriptor chain\n",
+ dev->name);
+ dev->stats.rx_dropped++;
+ break;
+ }
+ prefetch(skb->data - NET_IP_ALIGN);
+ priv->rx_skbuff[entry] = NULL;
+
+ skb_put(skb, frame_len);
+ dma_unmap_single(priv->device,
+ priv->rx_skbuff_dma[entry],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info(" frame received (%dbytes)", frame_len);
+ print_pkt(skb->data, frame_len);
+ }
+#endif
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (unlikely(status == csum_none)) {
+ /* always for the old mac 10/100 */
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_receive_skb(skb);
+ } else {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ napi_gro_receive(&priv->napi, skb);
+ }
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += frame_len;
+ dev->last_rx = jiffies;
+ }
+ entry = next_entry;
+ p = p_next; /* use prefetched values */
+ }
+
+ stmmac_rx_refill(dev);
+
+ priv->xstats.rx_pkt_n += count;
+
+ return count;
+}
+
+/**
+ * stmmac_poll - stmmac poll method (NAPI)
+ * @napi : pointer to the napi structure.
+ * @budget : maximum number of packets that the current CPU can receive from
+ * all interfaces.
+ * Description :
+ * This function implements the the reception process.
+ * Also poll the completed TX frames.
+ */
+static int stmmac_poll(struct napi_struct *napi, int budget)
+{
+ struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
+ struct net_device *dev = priv->dev;
+ int tx_cleaned = 0, work_done = 0;
+
+ priv->xstats.poll_n++;
+
+ tx_cleaned = stmmac_clean_tx(dev);
+
+ work_done = stmmac_rx(dev, budget);
+
+ if (tx_cleaned)
+ return budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ stmmac_dma_enable_irq_rx(dev->base_addr);
+ }
+ return work_done;
+}
+
+/**
+ * stmmac_tx_timeout
+ * @dev : Pointer to net device structure
+ * Description: this function is called when a packet transmission fails to
+ * complete within a reasonable tmrate. The driver will mark the error in the
+ * netdev structure and arrange for the device to be reset to a sane state
+ * in order to transmit a new packet.
+ */
+static void stmmac_tx_timeout(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ /* Disable mitigation */
+ tx_coalesce = -1;
+ priv->tx_coalesce = 0;
+
+ /* Clear Tx resources and restart transmitting again */
+ stmmac_tx_err(dev);
+ return;
+}
+
+/* Configuration changes (passed on by ifconfig) */
+static int stmmac_config(struct net_device *dev, struct ifmap *map)
+{
+ if (dev->flags & IFF_UP) /* can't act on a running interface */
+ return -EBUSY;
+
+ /* Don't allow changing the I/O address */
+ if (map->base_addr != dev->base_addr) {
+ pr_warning("%s: can't change I/O address\n", dev->name);
+ return -EOPNOTSUPP;
+ }
+
+ /* Don't allow changing the IRQ */
+ if (map->irq != dev->irq) {
+ pr_warning("%s: can't change IRQ number %d\n",
+ dev->name, dev->irq);
+ return -EOPNOTSUPP;
+ }
+
+ /* ignore other fields */
+ return 0;
+}
+
+/**
+ * stmmac_multicast_list - entry point for multicast addressing
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever multicast addresses must be enabled/disabled.
+ * Return value:
+ * void.
+ */
+static void stmmac_multicast_list(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+ priv->mac_type->ops->set_filter(dev);
+ spin_unlock(&priv->lock);
+ return;
+}
+
+/**
+ * stmmac_change_mtu - entry point to change MTU size for the device.
+ * @dev : device pointer.
+ * @new_mtu : the new MTU size for the device.
+ * Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ * to drive packet transmission. Ethernet has an MTU of 1500 octets
+ * (ETH_DATA_LEN). This value can be changed with ifconfig.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int max_mtu;
+
+ if (netif_running(dev)) {
+ pr_err("%s: must be stopped to change its MTU\n", dev->name);
+ return -EBUSY;
+ }
+
+ if (priv->is_gmac)
+ max_mtu = JUMBO_LEN;
+ else
+ max_mtu = ETH_DATA_LEN;
+
+ if ((new_mtu < 46) || (new_mtu > max_mtu)) {
+ pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
+ return -EINVAL;
+ }
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (unlikely(!dev)) {
+ pr_err("%s: invalid dev pointer\n", __func__);
+ return IRQ_NONE;
+ }
+
+ if (priv->is_gmac) {
+ unsigned long ioaddr = dev->base_addr;
+ /* To handle GMAC own interrupts */
+ priv->mac_type->ops->host_irq_status(ioaddr);
+ }
+ stmmac_dma_interrupt(dev);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling receive - used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled. */
+static void stmmac_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ stmmac_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+/**
+ * stmmac_ioctl - Entry point for the Ioctl
+ * @dev: Device pointer.
+ * @rq: An IOCTL specefic structure, that can contain a pointer to
+ * a proprietary structure used to pass information to the driver.
+ * @cmd: IOCTL command
+ * Description:
+ * Currently there are no special functionality supported in IOCTL, just the
+ * phy_mii_ioctl(...) can be invoked.
+ */
+static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (!priv->phydev)
+ return -EINVAL;
+
+ spin_lock(&priv->lock);
+ ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+ spin_unlock(&priv->lock);
+ default:
+ break;
+ }
+ return ret;
+}
+
+#ifdef STMMAC_VLAN_TAG_USED
+static void stmmac_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp);
+
+ spin_lock(&priv->lock);
+ priv->vlgrp = grp;
+ spin_unlock(&priv->lock);
+
+ return;
+}
+#endif
+
+static const struct net_device_ops stmmac_netdev_ops = {
+ .ndo_open = stmmac_open,
+ .ndo_start_xmit = stmmac_xmit,
+ .ndo_stop = stmmac_release,
+ .ndo_change_mtu = stmmac_change_mtu,
+ .ndo_set_multicast_list = stmmac_multicast_list,
+ .ndo_tx_timeout = stmmac_tx_timeout,
+ .ndo_do_ioctl = stmmac_ioctl,
+ .ndo_set_config = stmmac_config,
+#ifdef STMMAC_VLAN_TAG_USED
+ .ndo_vlan_rx_register = stmmac_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = stmmac_poll_controller,
+#endif
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+/**
+ * stmmac_probe - Initialization of the adapter .
+ * @dev : device pointer
+ * Description: The function initializes the network device structure for
+ * the STMMAC driver. It also calls the low level routines
+ * in order to init the HW (i.e. the DMA engine)
+ */
+static int stmmac_probe(struct net_device *dev)
+{
+ int ret = 0;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ ether_setup(dev);
+
+ dev->netdev_ops = &stmmac_netdev_ops;
+ stmmac_set_ethtool_ops(dev);
+
+ dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+#ifdef STMMAC_VLAN_TAG_USED
+ /* Both mac100 and gmac support receive VLAN tag detection */
+ dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+ priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+ if (priv->is_gmac)
+ priv->rx_csum = 1;
+
+ if (flow_ctrl)
+ priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
+
+ priv->pause = pause;
+ netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
+
+ /* Get the MAC address */
+ priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
+
+ stmmac_init_coalescence(priv->is_gmac, dev->mtu);
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ pr_warning("\tno valid MAC address;"
+ "please, use ifconfig or nwhwconfig!\n");
+
+ ret = register_netdev(dev);
+ if (ret) {
+ pr_err("%s: ERROR %i registering the device\n",
+ __func__, ret);
+ return -ENODEV;
+ }
+
+ DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
+ dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
+ (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
+
+ spin_lock_init(&priv->lock);
+ spin_lock_init(&priv->tx_lock);
+
+ return ret;
+}
+
+/**
+ * stmmac_mac_device_setup
+ * @dev : device pointer
+ * Description: select and initialise the mac device (mac100 or Gmac).
+ */
+static void stmmac_mac_device_setup(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ struct mac_device_info *device;
+
+ if (priv->is_gmac)
+ device = gmac_setup(ioaddr);
+ else
+ device = mac100_setup(ioaddr);
+
+ priv->mac_type = device;
+
+ priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->wolopts = WAKE_MAGIC; /* Magic Frame */
+
+ return;
+}
+
+static int stmmacphy_dvr_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacphy_data *plat_dat;
+ plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+
+ pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
+ plat_dat->bus_id);
+
+ return 0;
+}
+
+static int stmmacphy_dvr_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver stmmacphy_driver = {
+ .driver = {
+ .name = PHY_RESOURCE_NAME,
+ },
+ .probe = stmmacphy_dvr_probe,
+ .remove = stmmacphy_dvr_remove,
+};
+
+/**
+ * stmmac_associate_phy
+ * @dev: pointer to device structure
+ * @data: points to the private structure.
+ * Description: Scans through all the PHYs we have registered and checks if
+ * any are associated with our MAC. If so, then just fill in
+ * the blanks in our local context structure
+ */
+static int stmmac_associate_phy(struct device *dev, void *data)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)data;
+ struct plat_stmmacphy_data *plat_dat;
+
+ plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+
+ DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
+ plat_dat->bus_id);
+
+ /* Check that this phy is for the MAC being initialised */
+ if (priv->bus_id != plat_dat->bus_id)
+ return 0;
+
+ /* OK, this PHY is connected to the MAC.
+ Go ahead and get the parameters */
+ DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__);
+ priv->phy_irq =
+ platform_get_irq_byname(to_platform_device(dev), "phyirq");
+ DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__,
+ plat_dat->bus_id, priv->phy_irq);
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ plat_dat->phy_addr = phyaddr;
+
+ priv->phy_addr = plat_dat->phy_addr;
+ priv->phy_mask = plat_dat->phy_mask;
+ priv->phy_interface = plat_dat->interface;
+ priv->phy_reset = plat_dat->phy_reset;
+
+ DBG(probe, DEBUG, "%s: exiting\n", __func__);
+ return 1; /* forces exit of driver_for_each_device() */
+}
+
+/**
+ * stmmac_dvr_probe
+ * @pdev: platform device pointer
+ * Description: the driver is initialized through platform_device.
+ */
+static int stmmac_dvr_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res;
+ unsigned int *addr = NULL;
+ struct net_device *ndev = NULL;
+ struct stmmac_priv *priv;
+ struct plat_stmmacenet_data *plat_dat;
+
+ pr_info("STMMAC driver:\n\tplatform registration... ");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+ pr_info("done!\n");
+
+ if (!request_mem_region(res->start, (res->end - res->start),
+ pdev->name)) {
+ pr_err("%s: ERROR: memory allocation failed"
+ "cannot get the I/O addr 0x%x\n",
+ __func__, (unsigned int)res->start);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ addr = ioremap(res->start, (res->end - res->start));
+ if (!addr) {
+ pr_err("%s: ERROR: memory mapping failed \n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct stmmac_priv));
+ if (!ndev) {
+ pr_err("%s: ERROR: allocating the device\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ /* Get the MAC information */
+ ndev->irq = platform_get_irq_byname(pdev, "macirq");
+ if (ndev->irq == -ENXIO) {
+ pr_err("%s: ERROR: MAC IRQ configuration "
+ "information not found\n", __func__);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv = netdev_priv(ndev);
+ priv->device = &(pdev->dev);
+ priv->dev = ndev;
+ plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+ priv->bus_id = plat_dat->bus_id;
+ priv->pbl = plat_dat->pbl; /* TLI */
+ priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* Set the I/O base addr */
+ ndev->base_addr = (unsigned long)addr;
+
+ /* MAC HW revice detection */
+ stmmac_mac_device_setup(ndev);
+
+ /* Network Device Registration */
+ ret = stmmac_probe(ndev);
+ if (ret < 0)
+ goto out;
+
+ /* associate a PHY - it is provided by another platform bus */
+ if (!driver_for_each_device
+ (&(stmmacphy_driver.driver), NULL, (void *)priv,
+ stmmac_associate_phy)) {
+ pr_err("No PHY device is associated with this MAC!\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv->fix_mac_speed = plat_dat->fix_mac_speed;
+ priv->bsp_priv = plat_dat->bsp_priv;
+
+ pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
+ "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name,
+ pdev->id, ndev->irq, (unsigned int)addr);
+
+ /* MDIO bus Registration */
+ pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+ ret = stmmac_mdio_register(ndev);
+ if (ret < 0)
+ goto out;
+ pr_debug("registered!\n");
+
+out:
+ if (ret < 0) {
+ platform_set_drvdata(pdev, NULL);
+ release_mem_region(res->start, (res->end - res->start));
+ if (addr != NULL)
+ iounmap(addr);
+ }
+
+ return ret;
+}
+
+/**
+ * stmmac_dvr_remove
+ * @pdev: platform device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings,
+ * unregisters the MDIO bus and unmaps the allocated memory.
+ */
+static int stmmac_dvr_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ pr_info("%s:\n\tremoving driver", __func__);
+
+ stmmac_dma_stop_rx(ndev->base_addr);
+ stmmac_dma_stop_tx(ndev->base_addr);
+
+ stmmac_mac_disable_rx(ndev);
+ stmmac_mac_disable_tx(ndev);
+
+ netif_carrier_off(ndev);
+
+ stmmac_mdio_unregister(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+ unregister_netdev(ndev);
+
+ iounmap((void *)ndev->base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, (res->end - res->start));
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!dev || !netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+ netif_stop_queue(dev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_stop();
+#endif
+ napi_disable(&priv->napi);
+
+ /* Stop TX/RX DMA */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx,
+ priv->dma_rx_size);
+ priv->mac_type->ops->disable_rx_ic(priv->dma_rx,
+ priv->dma_rx_size,
+ rx_coalesce);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx,
+ priv->dma_tx_size);
+
+ stmmac_mac_disable_tx(dev);
+
+ if (device_may_wakeup(&(pdev->dev))) {
+ /* Enable Power down mode by programming the PMT regs */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr,
+ priv->wolopts);
+ } else {
+ stmmac_mac_disable_rx(dev);
+ }
+ } else {
+ priv->shutdown = 1;
+ /* Although this can appear slightly redundant it actually
+ * makes fast the standby operation and guarantees the driver
+ * working if hibernation is on media. */
+ stmmac_release(dev);
+ }
+
+ spin_unlock(&priv->lock);
+ return 0;
+}
+
+static int stmmac_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ if (!netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (priv->shutdown) {
+ /* Re-open the interface and re-init the MAC/DMA
+ and the rings. */
+ stmmac_open(dev);
+ goto out_resume;
+ }
+
+ /* Power Down bit, into the PM register, is cleared
+ * automatically as soon as a magic packet or a Wake-up frame
+ * is received. Anyway, it's better to manually clear
+ * this bit because it can generate problems while resuming
+ * from another devices (e.g. serial console). */
+ if (device_may_wakeup(&(pdev->dev)))
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr, 0);
+
+ netif_device_attach(dev);
+
+ /* Enable the MAC and DMA */
+ stmmac_mac_enable_rx(dev);
+ stmmac_mac_enable_tx(dev);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ napi_enable(&priv->napi);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ netif_start_queue(dev);
+
+out_resume:
+ spin_unlock(&priv->lock);
+ return 0;
+}
+#endif
+
+static struct platform_driver stmmac_driver = {
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ },
+ .probe = stmmac_dvr_probe,
+ .remove = stmmac_dvr_remove,
+#ifdef CONFIG_PM
+ .suspend = stmmac_suspend,
+ .resume = stmmac_resume,
+#endif
+
+};
+
+/**
+ * stmmac_init_module - Entry point for the driver
+ * Description: This function is the entry point for the driver.
+ */
+static int __init stmmac_init_module(void)
+{
+ int ret;
+
+ if (platform_driver_register(&stmmacphy_driver)) {
+ pr_err("No PHY devices registered!\n");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&stmmac_driver);
+ return ret;
+}
+
+/**
+ * stmmac_cleanup_module - Cleanup routine for the driver
+ * Description: This function is the cleanup routine for the driver.
+ */
+static void __exit stmmac_cleanup_module(void)
+{
+ platform_driver_unregister(&stmmacphy_driver);
+ platform_driver_unregister(&stmmac_driver);
+}
+
+#ifndef MODULE
+static int __init stmmac_cmdline_opt(char *str)
+{
+ char *opt;
+
+ if (!str || !*str)
+ return -EINVAL;
+ while ((opt = strsep(&str, ",")) != NULL) {
+ if (!strncmp(opt, "debug:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
+ else if (!strncmp(opt, "phyaddr:", 8))
+ strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
+ else if (!strncmp(opt, "dma_txsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_txsize);
+ else if (!strncmp(opt, "dma_rxsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_rxsize);
+ else if (!strncmp(opt, "buf_sz:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
+ else if (!strncmp(opt, "tc:", 3))
+ strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
+ else if (!strncmp(opt, "tx_coe:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
+ else if (!strncmp(opt, "watchdog:", 9))
+ strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
+ else if (!strncmp(opt, "flow_ctrl:", 10))
+ strict_strtoul(opt + 10, 0,
+ (unsigned long *)&flow_ctrl);
+ else if (!strncmp(opt, "pause:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
+ else if (!strncmp(opt, "tx_coalesce:", 12))
+ strict_strtoul(opt + 12, 0,
+ (unsigned long *)&tx_coalesce);
+ else if (!strncmp(opt, "rx_coalesce:", 12))
+ strict_strtoul(opt + 12, 0,
+ (unsigned long *)&rx_coalesce);
+#ifdef CONFIG_STMMAC_TIMER
+ else if (!strncmp(opt, "tmrate:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
+#endif
+ }
+ return 0;
+}
+
+__setup("stmmaceth=", stmmac_cmdline_opt);
+#endif
+
+module_init(stmmac_init_module);
+module_exit(stmmac_cleanup_module);
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@...com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
new file mode 100644
index 0000000..8498552
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -0,0 +1,217 @@
+/*******************************************************************************
+ STMMAC Ethernet Driver -- MDIO bus implementation
+ Provides Bus interface for MII registers
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Carl Shaw <carl.shaw@...com>
+ Maintainer: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define MII_BUSY 0x00000001
+#define MII_WRITE 0x00000002
+
+/**
+ * stmmac_mdio_read
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * Description: it reads data from the MII register from within the phy device.
+ * For the 7111 GMAC, we must set the bit 0 in the MII address register while
+ * accessing the PHY registers.
+ * Fortunately, it seems this has no drawback for the 7109 MAC.
+ */
+static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+ unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+ int data;
+ u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
+ ((phyreg << 6) & (0x000007C0)));
+ regValue |= MII_BUSY; /* in case of GMAC */
+
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+ writel(regValue, ioaddr + mii_address);
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ /* Read the data from the MII data register */
+ data = (int)readl(ioaddr + mii_data);
+
+ return data;
+}
+
+/**
+ * stmmac_mdio_write
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * @phydata: phy data
+ * Description: it writes the data into the MII register from within the device.
+ */
+static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
+ u16 phydata)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+ unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+ u16 value =
+ (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
+ | MII_WRITE;
+
+ value |= MII_BUSY;
+
+ /* Wait until any existing MII operation is complete */
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ /* Set the MII address register to write */
+ writel(phydata, ioaddr + mii_data);
+ writel(value, ioaddr + mii_address);
+
+ /* Wait until any existing MII operation is complete */
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ return 0;
+}
+
+/**
+ * stmmac_mdio_reset
+ * @bus: points to the mii_bus structure
+ * Description: reset the MII bus
+ */
+static int stmmac_mdio_reset(struct mii_bus *bus)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+
+ if (priv->phy_reset) {
+ pr_debug("stmmac_mdio_reset: calling phy_reset\n");
+ priv->phy_reset(priv->bsp_priv);
+ }
+
+ /* This is a workaround for problems with the STE101P PHY.
+ * It doesn't complete its reset until at least one clock cycle
+ * on MDC, so perform a dummy mdio read.
+ */
+ writel(0, ioaddr + mii_address);
+
+ return 0;
+}
+
+/**
+ * stmmac_mdio_register
+ * @ndev: net device structure
+ * Description: it registers the MII bus
+ */
+int stmmac_mdio_register(struct net_device *ndev)
+{
+ int err = 0;
+ struct mii_bus *new_bus;
+ int *irqlist;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int addr, found;
+
+ new_bus = mdiobus_alloc();
+ if (new_bus == NULL)
+ return -ENOMEM;
+
+ irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (irqlist == NULL) {
+ err = -ENOMEM;
+ goto irqlist_alloc_fail;
+ }
+
+ /* Assign IRQ to phy at address phy_addr */
+ if (priv->phy_addr != -1)
+ irqlist[priv->phy_addr] = priv->phy_irq;
+
+ new_bus->name = "STMMAC MII Bus";
+ new_bus->read = &stmmac_mdio_read;
+ new_bus->write = &stmmac_mdio_write;
+ new_bus->reset = &stmmac_mdio_reset;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ new_bus->priv = ndev;
+ new_bus->irq = irqlist;
+ new_bus->phy_mask = priv->phy_mask;
+ new_bus->parent = priv->device;
+ err = mdiobus_register(new_bus);
+ if (err != 0) {
+ pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
+ goto bus_register_fail;
+ }
+
+ priv->mii = new_bus;
+
+ found = 0;
+ for (addr = 0; addr < 32; addr++) {
+ struct phy_device *phydev = new_bus->phy_map[addr];
+ if (phydev) {
+ if (priv->phy_addr == -1) {
+ priv->phy_addr = addr;
+ phydev->irq = priv->phy_irq;
+ irqlist[addr] = priv->phy_irq;
+ }
+ pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n",
+ ndev->name, phydev->phy_id, addr,
+ phydev->irq, dev_name(&phydev->dev),
+ (addr == priv->phy_addr) ? " active" : "");
+ found = 1;
+ }
+ }
+
+ if (!found)
+ pr_warning("%s: No PHY found\n", ndev->name);
+
+ return 0;
+bus_register_fail:
+ kfree(irqlist);
+irqlist_alloc_fail:
+ kfree(new_bus);
+ return err;
+}
+
+/**
+ * stmmac_mdio_unregister
+ * @ndev: net device structure
+ * Description: it unregisters the MII bus
+ */
+int stmmac_mdio_unregister(struct net_device *ndev)
+{
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ mdiobus_unregister(priv->mii);
+ priv->mii->priv = NULL;
+ kfree(priv->mii);
+
+ return 0;
+}
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c
new file mode 100644
index 0000000..b838c65
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_timer.c
@@ -0,0 +1,140 @@
+/*******************************************************************************
+ STMMAC external timer support.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/etherdevice.h>
+#include "stmmac_timer.h"
+
+static void stmmac_timer_handler(void *data)
+{
+ struct net_device *dev = (struct net_device *)data;
+
+ stmmac_schedule(dev);
+
+ return;
+}
+
+#define STMMAC_TIMER_MSG(timer, freq) \
+printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq);
+
+#if defined(CONFIG_STMMAC_RTC_TIMER)
+#include <linux/rtc.h>
+static struct rtc_device *stmmac_rtc;
+static rtc_task_t stmmac_task;
+
+static void stmmac_rtc_start(unsigned int new_freq)
+{
+ rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq);
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1);
+ return;
+}
+
+static void stmmac_rtc_stop(void)
+{
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+ return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+ stmmac_task.private_data = dev;
+ stmmac_task.func = stmmac_timer_handler;
+
+ stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+ if (stmmac_rtc == NULL) {
+ pr_error("open rtc device failed\n");
+ return -ENODEV;
+ }
+
+ rtc_irq_register(stmmac_rtc, &stmmac_task);
+
+ /* Periodic mode is not supported */
+ if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
+ pr_error("set periodic failed\n");
+ rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+ rtc_class_close(stmmac_rtc);
+ return -1;
+ }
+
+ STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq);
+
+ tm->timer_start = stmmac_rtc_start;
+ tm->timer_stop = stmmac_rtc_stop;
+
+ return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+ rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+ rtc_class_close(stmmac_rtc);
+ return 0;
+}
+
+#elif defined(CONFIG_STMMAC_TMU_TIMER)
+#include <linux/clk.h>
+#define TMU_CHANNEL "tmu2_clk"
+static struct clk *timer_clock;
+
+static void stmmac_tmu_start(unsigned int new_freq)
+{
+ clk_set_rate(timer_clock, new_freq);
+ clk_enable(timer_clock);
+ return;
+}
+
+static void stmmac_tmu_stop(void)
+{
+ clk_disable(timer_clock);
+ return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+ timer_clock = clk_get(NULL, TMU_CHANNEL);
+
+ if (timer_clock == NULL)
+ return -1;
+
+ if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) {
+ timer_clock = NULL;
+ return -1;
+ }
+
+ STMMAC_TIMER_MSG("TMU2", tm->freq);
+ tm->timer_start = stmmac_tmu_start;
+ tm->timer_stop = stmmac_tmu_stop;
+
+ return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+ clk_disable(timer_clock);
+ tmu2_unregister_user();
+ clk_put(timer_clock);
+ return 0;
+}
+#endif
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h
new file mode 100644
index 0000000..f795cae
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_timer.h
@@ -0,0 +1,41 @@
+/*******************************************************************************
+ STMMAC external timer Header File.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
+*******************************************************************************/
+
+struct stmmac_timer {
+ void (*timer_start) (unsigned int new_freq);
+ void (*timer_stop) (void);
+ unsigned int freq;
+};
+
+/* Open the HW timer device and return 0 in case of success */
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm);
+/* Stop the timer and release it */
+int stmmac_close_ext_timer(void);
+/* Function used for scheduling task within the stmmac */
+void stmmac_schedule(struct net_device *dev);
+
+#if defined(CONFIG_STMMAC_TMU_TIMER)
+extern int tmu2_register_user(void *fnt, void *data);
+extern void tmu2_unregister_user(void);
+#endif
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists