| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1255744212-28074-4-git-send-email-dhananjay@netxen.com>
Date: Fri, 16 Oct 2009 18:50:08 -0700
From: Dhananjay Phadke <dhananjay@...xen.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, Amit Kumar Salecha <amit@...gic.com>,
Amit Kumar Salecha <amit@...xen.com>
Subject: [PATCH NEXT v2 3/7] netxen: reset sequence changes
From: Amit Kumar Salecha <amit@...gic.com>
Future revisions need different chip reset sequence
and firmware initialization.
Also clean up some never used debug code.
Signed-off-by: Amit Kumar Salecha <amit@...xen.com>
Signed-off-by: Dhananjay Phadke <dhananjay@...xen.com>
---
drivers/net/netxen/netxen_nic.h | 2 +-
drivers/net/netxen/netxen_nic_init.c | 41 +++++++++++----------------------
drivers/net/netxen/netxen_nic_main.c | 2 +-
3 files changed, 16 insertions(+), 29 deletions(-)
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index a608e25..db28f8a 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1270,7 +1270,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter);
int netxen_need_fw_reset(struct netxen_adapter *adapter);
void netxen_request_firmware(struct netxen_adapter *adapter);
void netxen_release_firmware(struct netxen_adapter *adapter);
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
+int netxen_pinit_from_rom(struct netxen_adapter *adapter);
int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 83387c7..a524844 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -437,7 +437,7 @@ int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp)
#define NETXEN_BOARDNUM 0x400c
#define NETXEN_CHIPNUM 0x4010
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
+int netxen_pinit_from_rom(struct netxen_adapter *adapter)
{
int addr, val;
int i, n, init_delay = 0;
@@ -450,21 +450,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
netxen_rom_unlock(adapter);
- if (verbose) {
- if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
- printk("P2 ROM board type: 0x%08x\n", val);
- else
- printk("Could not read board type\n");
- if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0)
- printk("P2 ROM board num: 0x%08x\n", val);
- else
- printk("Could not read board number\n");
- if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0)
- printk("P2 ROM chip num: 0x%08x\n", val);
- else
- printk("Could not read chip number\n");
- }
-
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
(n != 0xcafecafe) ||
@@ -486,11 +471,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
n &= ~0x80000000;
}
- if (n < 1024) {
- if (verbose)
- printk(KERN_DEBUG "%s: %d CRB init values found"
- " in ROM.\n", netxen_nic_driver_name, n);
- } else {
+ if (n >= 1024) {
printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
" initialized.\n", __func__, n);
return -EIO;
@@ -502,6 +483,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
netxen_nic_driver_name);
return -ENOMEM;
}
+
for (i = 0; i < n; i++) {
if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
@@ -512,11 +494,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
buf[i].addr = addr;
buf[i].data = val;
- if (verbose)
- printk(KERN_DEBUG "%s: PCI: 0x%08x == 0x%08x\n",
- netxen_nic_driver_name,
- (u32)netxen_decode_crb_addr(addr), val);
}
+
for (i = 0; i < n; i++) {
off = netxen_decode_crb_addr(buf[i].addr);
@@ -526,6 +505,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
continue;
}
off += NETXEN_PCI_CRBSPACE;
+
+ if (off & 1)
+ continue;
+
/* skipping cold reboot MAGIC */
if (off == NETXEN_CAM_RAM(0x1fc))
continue;
@@ -542,7 +525,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
continue;
if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
continue;
- if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
+ if (off == (NETXEN_CRB_PEG_NET_1 + 0x18) &&
+ !NX_IS_REVISION_P3P(adapter->ahw.revision_id))
buf[i].data = 0x1020;
/* skip the function enable register */
if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION))
@@ -751,7 +735,10 @@ netxen_load_firmware(struct netxen_adapter *adapter)
}
msleep(1);
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+ NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x18, 0x1020);
+ NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001e);
+ } else if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
else {
NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 5bc8520..2d772dd 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -810,7 +810,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
if (first_boot != 0x55555555) {
NXWR32(adapter, CRB_CMDPEG_STATE, 0);
- netxen_pinit_from_rom(adapter, 0);
+ netxen_pinit_from_rom(adapter);
msleep(1);
}
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists