| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200910171048.24962.florian@openwrt.org>
Date: Sat, 17 Oct 2009 10:48:23 +0200
From: Florian Fainelli <florian@...nwrt.org>
To: Sergei Shtylyov <sshtylyov@...mvista.com>
Cc: Ralf Baechle <ralf@...ux-mips.org>, linux-mips@...ux-mips.org,
Manuel Lauss <manuel.lauss@...glemail.com>,
David Miller <davem@...emloft.net>, netdev@...r.kernel.org
Subject: Re: [PATCH 1/2] alchemy: add au1000-eth platform device
Hello,
Please find below and updated version, hopefully addressing most if not all
of your comments.
--
From: Florian Fainelli <florian@...nwrt.org>
Subject: [PATCH 1/2] alchemy: add au1000-eth platform device (v3)
This patch makes the board code register the au1000-eth
platform device. The au1000-eth platform data can be
overriden with the au1xxx_override_eth_cfg function
like it has to be done for the Bosporus board which uses
a different MAC/PHY setup.
Changes from v2:
- declared the au1000-eth second driver instance platform_data
- made the override function generic and pass it the port number too
Changes from v1:
- remove per-board platform.c file
- add an override function to pass custom eth0 platform_data PHY settings
Signed-off-by: Florian Fainelli <florian@...nwrt.org>
---
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 195e5b3..167b24e 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -19,6 +19,7 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
#define PORT(_base, _irq) \
{ \
@@ -324,6 +325,88 @@ static struct platform_device pbdb_smbus_device = {
};
#endif
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq) \
+ { \
+ .start = CPHYSADDR(_base), \
+ .end = CPHYSADDR(_base + 0xffff), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = CPHYSADDR(_enable), \
+ .end = CPHYSADDR(_enable + 0x3), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ }
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+ MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+ .name = "au1000-eth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
+ .resource = au1xxx_eth0_resources,
+ .dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+ .name = "au1000-eth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
+ .resource = au1xxx_eth1_resources,
+ .dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+ struct au1000_eth_platform_data *eth_data)
+{
+ if (!eth_data || port > 1)
+ return;
+
+ if (port == 0)
+ memcpy(&au1xxx_eth0_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+ else
+ memcpy(&au1xxx_eth1_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xx0_uart_device,
&au1xxx_usb_ohci_device,
@@ -343,6 +426,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
+ &au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
@@ -354,6 +438,12 @@ static int __init au1xxx_platform_init(void)
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
+#ifndef CONFIG_SOC_AU1100
+ /* Register second MAC if enabled in pinfunc */
+ if (!(au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4)
+ platform_device_register(&au1xxx_eth1_device);
+#endif
+
return platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
}
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 64eb26f..f938924 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
#include <asm/mach-db1x00/db1x00.h>
#include <asm/mach-db1x00/bcsr.h>
@@ -101,6 +102,22 @@ void __init board_setup(void)
printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
+ struct au1000_eth_platform_data eth0_pdata;
+
+ /*
+ * Micrel/Kendin 5 port switch attached to MAC0,
+ * MAC0 is associated with PHY address 5 (== WAN port)
+ * MAC1 is not associated with any PHY, since it's connected directly
+ * to the switch.
+ * no interrupts are used
+ */
+ eth0_pdata.phy1_search_mac0 = 0;
+ eth0_pdata.phy_static_config = 1;
+ eth0_pdata.phy_addr = 5;
+ eth0_pdata.phy_busid = 0;
+
+ au1xxx_override_eth_cfg(0, ð0_pdata);
+
printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 0000000..f30529e
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,18 @@
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+ int phy_static_config;
+ int phy_search_highest_addr;
+ int phy1_search_mac0;
+ int phy_addr;
+ int phy_busid;
+ int phy_irq;
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+ struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
+
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists