| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1257174961-28406-1-git-send-email-chripell@fsfe.org>
Date: Mon, 2 Nov 2009 16:16:01 +0100
From: Christian Pellegrin <chripell@...e.org>
To: wg@...ndegger.com, socketcan-core@...ts.berlios.de,
spi-devel-general@...ts.sourceforge.net, netdev@...r.kernel.org,
pthomas8589@...il.com
Cc: Christian Pellegrin <chripell@...e.org>
Subject: [PATCH v2 net-next-2.6] can: Driver for the Microchip MCP251x SPI CAN controllers
---
drivers/net/can/Kconfig | 6 +
drivers/net/can/Makefile | 1 +
drivers/net/can/mcp251x.c | 1164 ++++++++++++++++++++++++++++++++++
include/linux/can/platform/mcp251x.h | 36 +
4 files changed, 1207 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/can/mcp251x.c
create mode 100644 include/linux/can/platform/mcp251x.h
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 26d77cc..b819cc2 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -102,6 +102,12 @@ config CAN_TI_HECC
Driver for TI HECC (High End CAN Controller) module found on many
TI devices. The device specifications are available from www.ti.com
+config CAN_MCP251X
+ tristate "Microchip MCP251x SPI CAN controllers"
+ depends on CAN_DEV && SPI
+ ---help---
+ Driver for the Microchip MCP251x SPI CAN controllers.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 31f4ab5..1489181 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -12,5 +12,6 @@ obj-y += usb/
obj-$(CONFIG_CAN_SJA1000) += sja1000/
obj-$(CONFIG_CAN_AT91) += at91_can.o
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
+obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
new file mode 100644
index 0000000..9471bb7
--- /dev/null
+++ b/drivers/net/can/mcp251x.c
@@ -0,0 +1,1164 @@
+/*
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ * MCP2510 support and bug fixes by Christian Pellegrin
+ * <chripell@...lware.org>
+ *
+ * Copyright 2009 Christian Pellegrin EVOL S.r.l.
+ *
+ * Copyright 2007 Raymarine UK, Ltd. All Rights Reserved.
+ * Written under contract by:
+ * Chris Elston, Katalix Systems, Ltd.
+ *
+ * Based on Microchip MCP251x CAN controller driver written by
+ * David Vrabel, Copyright 2006 Arcom Control Systems Ltd.
+ *
+ * Based on CAN bus driver for the CCAN controller written by
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix
+ * - Simon Kallweit, intefo AG
+ * Copyright 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ *
+ * Your platform definition file should specify something like:
+ *
+ * static struct mcp251x_platform_data mcp251x_info = {
+ * .oscillator_frequency = 8000000,
+ * .board_specific_setup = &mcp251x_setup,
+ * .model = CAN_MCP251X_MCP2510,
+ * .power_enable = mcp251x_power_enable,
+ * .transceiver_enable = NULL,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ * {
+ * .modalias = "mcp251x",
+ * .platform_data = &mcp251x_info,
+ * .irq = IRQ_EINT13,
+ * .max_speed_hz = 2*1000*1000,
+ * .chip_select = 2,
+ * },
+ * };
+ *
+ * Please see mcp251x.h for a description of the fields in
+ * struct mcp251x_platform_data.
+ *
+ */
+
+#include <linux/can.h>
+#include <linux/can/core.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/mcp251x.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/uaccess.h>
+
+/* SPI interface instruction set */
+#define INSTRUCTION_WRITE 0x02
+#define INSTRUCTION_READ 0x03
+#define INSTRUCTION_BIT_MODIFY 0x05
+#define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n))
+#define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94)
+#define INSTRUCTION_RESET 0xC0
+
+/* MPC251x registers */
+#define CANSTAT 0x0e
+#define CANCTRL 0x0f
+# define CANCTRL_REQOP_MASK 0xe0
+# define CANCTRL_REQOP_CONF 0x80
+# define CANCTRL_REQOP_LISTEN_ONLY 0x60
+# define CANCTRL_REQOP_LOOPBACK 0x40
+# define CANCTRL_REQOP_SLEEP 0x20
+# define CANCTRL_REQOP_NORMAL 0x00
+# define CANCTRL_OSM 0x08
+# define CANCTRL_ABAT 0x10
+#define TEC 0x1c
+#define REC 0x1d
+#define CNF1 0x2a
+# define CNF1_SJW_SHIFT 6
+#define CNF2 0x29
+# define CNF2_BTLMODE 0x80
+# define CNF2_SAM 0x40
+# define CNF2_PS1_SHIFT 3
+#define CNF3 0x28
+# define CNF3_SOF 0x08
+# define CNF3_WAKFIL 0x04
+# define CNF3_PHSEG2_MASK 0x07
+#define CANINTE 0x2b
+# define CANINTE_MERRE 0x80
+# define CANINTE_WAKIE 0x40
+# define CANINTE_ERRIE 0x20
+# define CANINTE_TX2IE 0x10
+# define CANINTE_TX1IE 0x08
+# define CANINTE_TX0IE 0x04
+# define CANINTE_RX1IE 0x02
+# define CANINTE_RX0IE 0x01
+#define CANINTF 0x2c
+# define CANINTF_MERRF 0x80
+# define CANINTF_WAKIF 0x40
+# define CANINTF_ERRIF 0x20
+# define CANINTF_TX2IF 0x10
+# define CANINTF_TX1IF 0x08
+# define CANINTF_TX0IF 0x04
+# define CANINTF_RX1IF 0x02
+# define CANINTF_RX0IF 0x01
+#define EFLG 0x2d
+# define EFLG_EWARN 0x01
+# define EFLG_RXWAR 0x02
+# define EFLG_TXWAR 0x04
+# define EFLG_RXEP 0x08
+# define EFLG_TXEP 0x10
+# define EFLG_TXBO 0x20
+# define EFLG_RX0OVR 0x40
+# define EFLG_RX1OVR 0x80
+#define TXBCTRL(n) (((n) * 0x10) + 0x30 + TXBCTRL_OFF)
+# define TXBCTRL_ABTF 0x40
+# define TXBCTRL_MLOA 0x20
+# define TXBCTRL_TXERR 0x10
+# define TXBCTRL_TXREQ 0x08
+#define TXBSIDH(n) (((n) * 0x10) + 0x30 + TXBSIDH_OFF)
+# define SIDH_SHIFT 3
+#define TXBSIDL(n) (((n) * 0x10) + 0x30 + TXBSIDL_OFF)
+# define SIDL_SID_MASK 7
+# define SIDL_SID_SHIFT 5
+# define SIDL_EXIDE_SHIFT 3
+# define SIDL_EID_SHIFT 16
+# define SIDL_EID_MASK 3
+#define TXBEID8(n) (((n) * 0x10) + 0x30 + TXBEID8_OFF)
+#define TXBEID0(n) (((n) * 0x10) + 0x30 + TXBEID0_OFF)
+#define TXBDLC(n) (((n) * 0x10) + 0x30 + TXBDLC_OFF)
+# define DLC_RTR_SHIFT 6
+#define TXBCTRL_OFF 0
+#define TXBSIDH_OFF 1
+#define TXBSIDL_OFF 2
+#define TXBEID8_OFF 3
+#define TXBEID0_OFF 4
+#define TXBDLC_OFF 5
+#define TXBDAT_OFF 6
+#define RXBCTRL(n) (((n) * 0x10) + 0x60 + RXBCTRL_OFF)
+# define RXBCTRL_BUKT 0x04
+# define RXBCTRL_RXM0 0x20
+# define RXBCTRL_RXM1 0x40
+#define RXBSIDH(n) (((n) * 0x10) + 0x60 + RXBSIDH_OFF)
+# define RXBSIDH_SHIFT 3
+#define RXBSIDL(n) (((n) * 0x10) + 0x60 + RXBSIDL_OFF)
+# define RXBSIDL_IDE 0x08
+# define RXBSIDL_EID 3
+# define RXBSIDL_SHIFT 5
+#define RXBEID8(n) (((n) * 0x10) + 0x60 + RXBEID8_OFF)
+#define RXBEID0(n) (((n) * 0x10) + 0x60 + RXBEID0_OFF)
+#define RXBDLC(n) (((n) * 0x10) + 0x60 + RXBDLC_OFF)
+# define RXBDLC_LEN_MASK 0x0f
+# define RXBDLC_RTR 0x40
+#define RXBCTRL_OFF 0
+#define RXBSIDH_OFF 1
+#define RXBSIDL_OFF 2
+#define RXBEID8_OFF 3
+#define RXBEID0_OFF 4
+#define RXBDLC_OFF 5
+#define RXBDAT_OFF 6
+
+#define GET_BYTE(val, byte) \
+ (((val) >> ((byte) * 8)) & 0xff)
+#define SET_BYTE(val, byte) \
+ (((val) & 0xff) << ((byte) * 8))
+
+/*
+ * Buffer size required for the largest SPI transfer (i.e., reading a
+ * frame)
+ */
+#define CAN_FRAME_MAX_DATA_LEN 8
+#define SPI_TRANSFER_BUF_LEN (6 + CAN_FRAME_MAX_DATA_LEN)
+#define CAN_FRAME_MAX_BITS 128
+
+#define TX_ECHO_SKB_MAX 1
+
+#define DEVICE_NAME "mcp251x"
+
+static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+module_param(mcp251x_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+
+static struct can_bittiming_const mcp251x_bittiming_const = {
+ .name = DEVICE_NAME,
+ .tseg1_min = 3,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+struct mcp251x_priv {
+ struct can_priv can;
+ struct net_device *net;
+ struct spi_device *spi;
+
+ struct mutex spi_lock; /* SPI buffer lock */
+ u8 *spi_tx_buf;
+ u8 *spi_rx_buf;
+ dma_addr_t spi_tx_dma;
+ dma_addr_t spi_rx_dma;
+
+ struct sk_buff *tx_skb;
+ int tx_len;
+ struct workqueue_struct *wq;
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct completion awake;
+ int wake;
+ int force_quit;
+ int after_suspend;
+#define AFTER_SUSPEND_UP 1
+#define AFTER_SUSPEND_DOWN 2
+#define AFTER_SUSPEND_POWER 4
+#define AFTER_SUSPEND_RESTART 8
+ int restart_tx;
+};
+
+static void mcp251x_clean(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ net->stats.tx_errors++;
+ if (priv->tx_skb)
+ dev_kfree_skb(priv->tx_skb);
+ if (priv->tx_len)
+ can_free_echo_skb(priv->net, 0);
+ priv->tx_skb = NULL;
+ priv->tx_len = 0;
+}
+
+/*
+ * Note about handling of error return of mcp251x_spi_trans: accessing
+ * registers via SPI is not really different conceptually than using
+ * normal I/O assembler instructions, although it's much more
+ * complicated from a practical POV. So it's not advisable to always
+ * check the return value of this function. Imagine that every
+ * read{b,l}, write{b,l} and friends would be bracketed in "if ( < 0)
+ * error();", it would be a great mess (well there are some situation
+ * when exception handling C++ like could be useful after all). So we
+ * just check that transfers are OK at the beginning of our
+ * conversation with the chip and to avoid doing really nasty things
+ * (like injecting bogus packets in the network stack).
+ */
+static int mcp251x_spi_trans(struct spi_device *spi, int len)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct spi_transfer t = {
+ .tx_buf = priv->spi_tx_buf,
+ .rx_buf = priv->spi_rx_buf,
+ .len = len,
+ .cs_change = 0,
+ };
+ struct spi_message m;
+ int ret;
+
+ spi_message_init(&m);
+
+ if (mcp251x_enable_dma) {
+ t.tx_dma = priv->spi_tx_dma;
+ t.rx_dma = priv->spi_rx_dma;
+ m.is_dma_mapped = 1;
+ }
+
+ spi_message_add_tail(&t, &m);
+
+ ret = spi_sync(spi, &m);
+ if (ret)
+ dev_err(&spi->dev, "spi transfer failed: ret = %d\n", ret);
+ return ret;
+}
+
+static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ u8 val = 0;
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_READ;
+ priv->spi_tx_buf[1] = reg;
+
+ mcp251x_spi_trans(spi, 3);
+ val = priv->spi_rx_buf[2];
+
+ mutex_unlock(&priv->spi_lock);
+
+ return val;
+}
+
+static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_WRITE;
+ priv->spi_tx_buf[1] = reg;
+ priv->spi_tx_buf[2] = val;
+
+ mcp251x_spi_trans(spi, 3);
+
+ mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
+ u8 mask, uint8_t val)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY;
+ priv->spi_tx_buf[1] = reg;
+ priv->spi_tx_buf[2] = mask;
+ priv->spi_tx_buf[3] = val;
+
+ mcp251x_spi_trans(spi, 4);
+
+ mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
+ int len, int tx_buf_idx)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ if (pdata->model == CAN_MCP251X_MCP2510) {
+ int i;
+
+ for (i = 1; i < TXBDAT_OFF + len; i++)
+ mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i,
+ buf[i]);
+ } else {
+ mutex_lock(&priv->spi_lock);
+ memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
+ mcp251x_spi_trans(spi, TXBDAT_OFF + len);
+ mutex_unlock(&priv->spi_lock);
+ }
+}
+
+static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
+ int tx_buf_idx)
+{
+ u32 sid, eid, exide, rtr;
+ u8 buf[SPI_TRANSFER_BUF_LEN];
+
+ exide = (frame->can_id & CAN_EFF_FLAG) ? 1 : 0; /* Extended ID Enable */
+ if (exide)
+ sid = (frame->can_id & CAN_EFF_MASK) >> 18;
+ else
+ sid = frame->can_id & CAN_SFF_MASK; /* Standard ID */
+ eid = frame->can_id & CAN_EFF_MASK; /* Extended ID */
+ rtr = (frame->can_id & CAN_RTR_FLAG) ? 1 : 0; /* Remote transmission */
+
+ buf[TXBCTRL_OFF] = INSTRUCTION_LOAD_TXB(tx_buf_idx);
+ buf[TXBSIDH_OFF] = sid >> SIDH_SHIFT;
+ buf[TXBSIDL_OFF] = ((sid & SIDL_SID_MASK) << SIDL_SID_SHIFT) |
+ (exide << SIDL_EXIDE_SHIFT) |
+ ((eid >> SIDL_EID_SHIFT) & SIDL_EID_MASK);
+ buf[TXBEID8_OFF] = GET_BYTE(eid, 1);
+ buf[TXBEID0_OFF] = GET_BYTE(eid, 0);
+ buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
+ memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
+ mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
+ mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+}
+
+static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
+ int buf_idx)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+ if (pdata->model == CAN_MCP251X_MCP2510) {
+ int i, len;
+
+ for (i = 1; i < RXBDAT_OFF; i++)
+ buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+ len = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+ if (len > 8)
+ len = 8;
+ for (; i < (RXBDAT_OFF + len); i++)
+ buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+ } else {
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
+ mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
+ memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+
+ mutex_unlock(&priv->spi_lock);
+ }
+}
+
+static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct sk_buff *skb;
+ struct can_frame *frame;
+ u8 buf[SPI_TRANSFER_BUF_LEN];
+
+ skb = alloc_can_skb(priv->net, &frame);
+ if (!skb) {
+ dev_err(&spi->dev, "cannot allocate RX skb\n");
+ priv->net->stats.rx_dropped++;
+ return;
+ }
+
+ mcp251x_hw_rx_frame(spi, buf, buf_idx);
+ if (buf[RXBSIDL_OFF] & RXBSIDL_IDE) {
+ /* Extended ID format */
+ frame->can_id = CAN_EFF_FLAG;
+ frame->can_id |=
+ /* Extended ID part */
+ SET_BYTE(buf[RXBSIDL_OFF] & RXBSIDL_EID, 2) |
+ SET_BYTE(buf[RXBEID8_OFF], 1) |
+ SET_BYTE(buf[RXBEID0_OFF], 0) |
+ /* Standard ID part */
+ (((buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+ (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT)) << 18);
+ /* Remote transmission request */
+ if (buf[RXBDLC_OFF] & RXBDLC_RTR)
+ frame->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* Standard ID format */
+ frame->can_id =
+ (buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+ (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT);
+ }
+ /* Data length */
+ frame->can_dlc = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+ if (frame->can_dlc > 8) {
+ dev_warn(&spi->dev, "invalid frame recevied\n");
+ priv->net->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+ memcpy(frame->data, buf + RXBDAT_OFF, frame->can_dlc);
+
+ priv->net->stats.rx_packets++;
+ priv->net->stats.rx_bytes += frame->can_dlc;
+ netif_rx(skb);
+}
+
+static void mcp251x_hw_sleep(struct spi_device *spi)
+{
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP);
+}
+
+static void mcp251x_hw_wakeup(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ priv->wake = 1;
+
+ /* Can only wake up by generating a wake-up interrupt. */
+ mcp251x_write_bits(spi, CANINTE, CANINTE_WAKIE, CANINTE_WAKIE);
+ mcp251x_write_bits(spi, CANINTF, CANINTF_WAKIF, CANINTF_WAKIF);
+
+ /* Wait until the device is awake */
+ if (!wait_for_completion_timeout(&priv->awake, HZ))
+ dev_err(&spi->dev, "MCP251x didn't wake-up\n");
+}
+
+static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+
+ if (priv->tx_skb || priv->tx_len) {
+ dev_warn(&spi->dev, "hard_xmit called while tx busy\n");
+ netif_stop_queue(net);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (skb->len != sizeof(struct can_frame)) {
+ dev_err(&spi->dev, "dropping packet - bad length\n");
+ dev_kfree_skb(skb);
+ net->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ netif_stop_queue(net);
+ priv->tx_skb = skb;
+ net->trans_start = jiffies;
+ queue_work(priv->wq, &priv->tx_work);
+
+ return NETDEV_TX_OK;
+}
+
+static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ switch (mode) {
+ case CAN_MODE_START:
+ /* We have to delay work since SPI I/O may sleep */
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ priv->restart_tx = 1;
+ if (priv->can.restart_ms == 0)
+ priv->after_suspend = AFTER_SUSPEND_RESTART;
+ queue_work(priv->wq, &priv->irq_work);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static void mcp251x_set_normal_mode(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ unsigned long timeout;
+
+ /* Enable interrupts */
+ mcp251x_write_reg(spi, CANINTE,
+ CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE |
+ CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE |
+ CANINTF_MERRF);
+
+ if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+ /* Put device into loopback mode */
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK);
+ } else {
+ /* Put device into normal mode */
+ mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
+
+ /* Wait for the device to enter normal mode */
+ timeout = jiffies + HZ;
+ while (mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) {
+ schedule();
+ if (time_after(jiffies, timeout)) {
+ dev_err(&spi->dev, "MCP251x didn't"
+ " enter in normal mode\n");
+ return;
+ }
+ }
+ }
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static int mcp251x_do_set_bittiming(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct can_bittiming *bt = &priv->can.bittiming;
+ struct spi_device *spi = priv->spi;
+
+ mcp251x_write_reg(spi, CNF1, ((bt->sjw - 1) << CNF1_SJW_SHIFT) |
+ (bt->brp - 1));
+ mcp251x_write_reg(spi, CNF2, CNF2_BTLMODE |
+ (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ?
+ CNF2_SAM : 0) |
+ ((bt->phase_seg1 - 1) << CNF2_PS1_SHIFT) |
+ (bt->prop_seg - 1));
+ mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK,
+ (bt->phase_seg2 - 1));
+ dev_info(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n",
+ mcp251x_read_reg(spi, CNF1),
+ mcp251x_read_reg(spi, CNF2),
+ mcp251x_read_reg(spi, CNF3));
+
+ return 0;
+}
+
+static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv,
+ struct spi_device *spi)
+{
+ int ret;
+
+ ret = open_candev(net);
+ if (ret) {
+ dev_err(&spi->dev, "unable to set initial baudrate!\n");
+ return ret;
+ }
+
+ /* Enable RX0->RX1 buffer roll over and disable filters */
+ mcp251x_write_bits(spi, RXBCTRL(0),
+ RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1,
+ RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1);
+ mcp251x_write_bits(spi, RXBCTRL(1),
+ RXBCTRL_RXM0 | RXBCTRL_RXM1,
+ RXBCTRL_RXM0 | RXBCTRL_RXM1);
+ return 0;
+}
+
+static void mcp251x_hw_reset(struct spi_device *spi)
+{
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ int ret;
+
+ mutex_lock(&priv->spi_lock);
+
+ priv->spi_tx_buf[0] = INSTRUCTION_RESET;
+
+ ret = spi_write(spi, priv->spi_tx_buf, 1);
+
+ mutex_unlock(&priv->spi_lock);
+
+ if (ret)
+ dev_err(&spi->dev, "reset failed: ret = %d\n", ret);
+ /* Wait for reset to finish */
+ mdelay(10);
+}
+
+static int mcp251x_hw_probe(struct spi_device *spi)
+{
+ int st1, st2;
+
+ mcp251x_hw_reset(spi);
+
+ /*
+ * Please note that these are "magic values" based on after
+ * reset defaults taken from data sheet which allows us to see
+ * if we really have a chip on the bus (we avoid common all
+ * zeroes or all ones situations)
+ */
+ st1 = mcp251x_read_reg(spi, CANSTAT) & 0xEE;
+ st2 = mcp251x_read_reg(spi, CANCTRL) & 0x17;
+
+ dev_dbg(&spi->dev, "CANSTAT 0x%02x CANCTRL 0x%02x\n", st1, st2);
+
+ /* Check for power up default values */
+ return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
+}
+
+static irqreturn_t mcp251x_can_isr(int irq, void *dev_id)
+{
+ struct net_device *net = (struct net_device *)dev_id;
+ struct mcp251x_priv *priv = netdev_priv(net);
+
+ /* Schedule bottom half */
+ if (!work_pending(&priv->irq_work))
+ queue_work(priv->wq, &priv->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int mcp251x_open(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ int ret;
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(1);
+
+ priv->force_quit = 0;
+ priv->tx_skb = NULL;
+ priv->tx_len = 0;
+
+ ret = request_irq(spi->irq, mcp251x_can_isr,
+ IRQF_TRIGGER_FALLING, DEVICE_NAME, net);
+ if (ret) {
+ dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
+ return ret;
+ }
+
+ mcp251x_hw_wakeup(spi);
+ mcp251x_hw_reset(spi);
+ ret = mcp251x_setup(net, priv, spi);
+ if (ret) {
+ free_irq(spi->irq, net);
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+ return ret;
+ }
+ mcp251x_set_normal_mode(spi);
+ netif_wake_queue(net);
+
+ return 0;
+}
+
+static int mcp251x_stop(struct net_device *net)
+{
+ struct mcp251x_priv *priv = netdev_priv(net);
+ struct spi_device *spi = priv->spi;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+ close_candev(net);
+
+ /* Disable and clear pending interrupts */
+ mcp251x_write_reg(spi, CANINTE, 0x00);
+ mcp251x_write_reg(spi, CANINTF, 0x00);
+
+ priv->force_quit = 1;
+ free_irq(spi->irq, net);
+ flush_workqueue(priv->wq);
+
+ mcp251x_write_reg(spi, TXBCTRL(0), 0);
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+
+ mcp251x_hw_sleep(spi);
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+
+ priv->can.state = CAN_STATE_STOPPED;
+
+ return 0;
+}
+
+static void mcp251x_tx_work_handler(struct work_struct *ws)
+{
+ struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+ tx_work);
+ struct spi_device *spi = priv->spi;
+ struct net_device *net = priv->net;
+ struct can_frame *frame;
+
+ if (priv->tx_skb) {
+ frame = (struct can_frame *)priv->tx_skb->data;
+
+ if (priv->can.state == CAN_STATE_BUS_OFF) {
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ return;
+ }
+ if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN)
+ frame->can_dlc = CAN_FRAME_MAX_DATA_LEN;
+ mcp251x_hw_tx(spi, frame, 0);
+ priv->tx_len = 1 + frame->can_dlc;
+ can_put_echo_skb(priv->tx_skb, net, 0);
+ priv->tx_skb = NULL;
+ }
+}
+
+static void mcp251x_irq_work_handler(struct work_struct *ws)
+{
+ struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+ irq_work);
+ struct spi_device *spi = priv->spi;
+ struct net_device *net = priv->net;
+ u8 txbnctrl;
+ u8 intf;
+ enum can_state new_state;
+
+ if (priv->after_suspend) {
+ mdelay(10);
+ mcp251x_hw_reset(spi);
+ mcp251x_setup(net, priv, spi);
+ if (priv->after_suspend & AFTER_SUSPEND_RESTART) {
+ mcp251x_set_normal_mode(spi);
+ } else if (priv->after_suspend & AFTER_SUSPEND_UP) {
+ netif_device_attach(net);
+ /* Clean since we lost tx buffer */
+ if (priv->tx_skb || priv->tx_len) {
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ }
+ mcp251x_set_normal_mode(spi);
+ } else {
+ mcp251x_hw_sleep(spi);
+ }
+ priv->after_suspend = 0;
+ }
+
+ if (priv->can.restart_ms == 0 && priv->can.state == CAN_STATE_BUS_OFF) {
+ while (!priv->force_quit && !freezing(current) &&
+ (intf = mcp251x_read_reg(spi, CANINTF)))
+ mcp251x_write_bits(spi, CANINTF, intf, 0x00);
+ return;
+ }
+
+ while (!priv->force_quit && !freezing(current)) {
+ u8 eflag = mcp251x_read_reg(spi, EFLG);
+ int can_id = 0, data1 = 0;
+
+ mcp251x_write_reg(spi, EFLG, 0x00);
+
+ if (priv->restart_tx) {
+ priv->restart_tx = 0;
+ mcp251x_write_reg(spi, TXBCTRL(0), 0);
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ can_id |= CAN_ERR_RESTARTED;
+ }
+
+ if (priv->wake) {
+ /* Wait whilst the device wakes up */
+ mdelay(10);
+ priv->wake = 0;
+ }
+
+ intf = mcp251x_read_reg(spi, CANINTF);
+ mcp251x_write_bits(spi, CANINTF, intf, 0x00);
+
+ /* Update can state */
+ if (eflag & EFLG_TXBO) {
+ new_state = CAN_STATE_BUS_OFF;
+ can_id |= CAN_ERR_BUSOFF;
+ } else if (eflag & EFLG_TXEP) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_TX_PASSIVE;
+ } else if (eflag & EFLG_RXEP) {
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_RX_PASSIVE;
+ } else if (eflag & EFLG_TXWAR) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_TX_WARNING;
+ } else if (eflag & EFLG_RXWAR) {
+ new_state = CAN_STATE_ERROR_WARNING;
+ can_id |= CAN_ERR_CRTL;
+ data1 |= CAN_ERR_CRTL_RX_WARNING;
+ } else {
+ new_state = CAN_STATE_ERROR_ACTIVE;
+ }
+
+ /* Update can state statistics */
+ switch (priv->can.state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ if (new_state >= CAN_STATE_ERROR_WARNING &&
+ new_state <= CAN_STATE_BUS_OFF)
+ priv->can.can_stats.error_warning++;
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ if (new_state >= CAN_STATE_ERROR_PASSIVE &&
+ new_state <= CAN_STATE_BUS_OFF)
+ priv->can.can_stats.error_passive++;
+ break;
+ default:
+ break;
+ }
+ priv->can.state = new_state;
+
+ if ((intf & CANINTF_ERRIF) || (can_id & CAN_ERR_RESTARTED)) {
+ struct sk_buff *skb;
+ struct can_frame *frame;
+
+ /* Create error frame */
+ skb = alloc_can_err_skb(net, &frame);
+ if (skb) {
+ /* Set error frame flags based on bus state */
+ frame->can_id = can_id;
+ frame->data[1] = data1;
+
+ /* Update net stats for overflows */
+ if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) {
+ if (eflag & EFLG_RX0OVR)
+ net->stats.rx_over_errors++;
+ if (eflag & EFLG_RX1OVR)
+ net->stats.rx_over_errors++;
+ frame->can_id |= CAN_ERR_CRTL;
+ frame->data[1] |=
+ CAN_ERR_CRTL_RX_OVERFLOW;
+ }
+
+ netif_rx(skb);
+ } else {
+ dev_info(&spi->dev,
+ "cannot allocate error skb\n");
+ }
+ }
+
+ if (priv->can.state == CAN_STATE_BUS_OFF) {
+ if (priv->can.restart_ms == 0) {
+ can_bus_off(net);
+ mcp251x_hw_sleep(spi);
+ return;
+ }
+ }
+
+ if (intf == 0)
+ break;
+
+ if (intf & CANINTF_WAKIF)
+ complete(&priv->awake);
+
+ if (intf & CANINTF_MERRF) {
+ /* If there are pending Tx buffers, restart queue */
+ txbnctrl = mcp251x_read_reg(spi, TXBCTRL(0));
+ if (!(txbnctrl & TXBCTRL_TXREQ)) {
+ if (priv->tx_skb || priv->tx_len)
+ mcp251x_clean(net);
+ netif_wake_queue(net);
+ }
+ }
+
+ if (intf & (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF)) {
+ net->stats.tx_packets++;
+ net->stats.tx_bytes += priv->tx_len - 1;
+ if (priv->tx_len) {
+ can_get_echo_skb(net, 0);
+ priv->tx_len = 0;
+ }
+ netif_wake_queue(net);
+ }
+
+ if (intf & CANINTF_RX0IF)
+ mcp251x_hw_rx(spi, 0);
+
+ if (intf & CANINTF_RX1IF)
+ mcp251x_hw_rx(spi, 1);
+ }
+}
+
+static const struct net_device_ops mcp251x_netdev_ops = {
+ .ndo_open = mcp251x_open,
+ .ndo_stop = mcp251x_stop,
+ .ndo_start_xmit = mcp251x_hard_start_xmit,
+};
+
+static int __devinit mcp251x_can_probe(struct spi_device *spi)
+{
+ struct net_device *net;
+ struct mcp251x_priv *priv;
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ int ret = -ENODEV;
+
+ if (!pdata)
+ /* Platform data is required for osc freq */
+ goto error_out;
+
+ /* Allocate can/net device */
+ net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
+ if (!net) {
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
+
+ net->netdev_ops = &mcp251x_netdev_ops;
+ net->flags |= IFF_ECHO;
+
+ priv = netdev_priv(net);
+ priv->can.bittiming_const = &mcp251x_bittiming_const;
+ priv->can.do_set_mode = mcp251x_do_set_mode;
+ priv->can.clock.freq = pdata->oscillator_frequency / 2;
+ priv->can.do_set_bittiming = mcp251x_do_set_bittiming;
+ priv->net = net;
+ dev_set_drvdata(&spi->dev, priv);
+
+ priv->spi = spi;
+ mutex_init(&priv->spi_lock);
+
+ /* If requested, allocate DMA buffers */
+ if (mcp251x_enable_dma) {
+ spi->dev.coherent_dma_mask = ~0;
+
+ /*
+ * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+ * that much and share it between Tx and Rx DMA buffers.
+ */
+ priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+ PAGE_SIZE,
+ &priv->spi_tx_dma,
+ GFP_DMA);
+
+ if (priv->spi_tx_buf) {
+ priv->spi_rx_buf = (u8 *)(priv->spi_tx_buf +
+ (PAGE_SIZE / 2));
+ priv->spi_rx_dma = (dma_addr_t)(priv->spi_tx_dma +
+ (PAGE_SIZE / 2));
+ } else {
+ /* Fall back to non-DMA */
+ mcp251x_enable_dma = 0;
+ }
+ }
+
+ /* Allocate non-DMA buffers */
+ if (!mcp251x_enable_dma) {
+ priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_tx_buf;
+ }
+ priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+ if (!priv->spi_tx_buf) {
+ ret = -ENOMEM;
+ goto error_rx_buf;
+ }
+ }
+
+ if (pdata->power_enable)
+ pdata->power_enable(1);
+
+ /* Call out to platform specific setup */
+ if (pdata->board_specific_setup)
+ pdata->board_specific_setup(spi);
+
+ SET_NETDEV_DEV(net, &spi->dev);
+
+ priv->wq = create_freezeable_workqueue("mcp251x_wq");
+
+ INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
+ INIT_WORK(&priv->irq_work, mcp251x_irq_work_handler);
+
+ init_completion(&priv->awake);
+
+ /* Configure the SPI bus */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ if (!mcp251x_hw_probe(spi)) {
+ dev_info(&spi->dev, "Probe failed\n");
+ goto error_probe;
+ }
+ mcp251x_hw_sleep(spi);
+
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+
+ ret = register_candev(net);
+ if (ret >= 0) {
+ dev_info(&spi->dev, "probed\n");
+ return ret;
+ }
+error_probe:
+ if (!mcp251x_enable_dma)
+ kfree(priv->spi_rx_buf);
+error_rx_buf:
+ if (!mcp251x_enable_dma)
+ kfree(priv->spi_tx_buf);
+error_tx_buf:
+ free_candev(net);
+ if (mcp251x_enable_dma)
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+error_alloc:
+ dev_err(&spi->dev, "probe failed\n");
+error_out:
+ return ret;
+}
+
+static int __devexit mcp251x_can_remove(struct spi_device *spi)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct net_device *net = priv->net;
+
+ unregister_candev(net);
+ free_candev(net);
+
+ priv->force_quit = 1;
+ flush_workqueue(priv->wq);
+ destroy_workqueue(priv->wq);
+
+ if (mcp251x_enable_dma) {
+ dma_free_coherent(&spi->dev, PAGE_SIZE,
+ priv->spi_tx_buf, priv->spi_tx_dma);
+ } else {
+ kfree(priv->spi_tx_buf);
+ kfree(priv->spi_rx_buf);
+ }
+
+ if (pdata->power_enable)
+ pdata->power_enable(0);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcp251x_can_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+ struct net_device *net = priv->net;
+
+ if (netif_running(net)) {
+ netif_device_detach(net);
+
+ mcp251x_hw_sleep(spi);
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(0);
+ priv->after_suspend = AFTER_SUSPEND_UP;
+ } else {
+ priv->after_suspend = AFTER_SUSPEND_DOWN;
+ }
+
+ if (pdata->power_enable) {
+ pdata->power_enable(0);
+ priv->after_suspend |= AFTER_SUSPEND_POWER;
+ }
+
+ return 0;
+}
+
+static int mcp251x_can_resume(struct spi_device *spi)
+{
+ struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+ if (priv->after_suspend & AFTER_SUSPEND_POWER) {
+ pdata->power_enable(1);
+ queue_work(priv->wq, &priv->irq_work);
+ } else {
+ if (priv->after_suspend & AFTER_SUSPEND_UP) {
+ if (pdata->transceiver_enable)
+ pdata->transceiver_enable(1);
+ queue_work(priv->wq, &priv->irq_work);
+ } else {
+ priv->after_suspend = 0;
+ }
+ }
+ return 0;
+}
+#else
+#define mcp251x_can_suspend NULL
+#define mcp251x_can_resume NULL
+#endif
+
+static struct spi_driver mcp251x_can_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = mcp251x_can_probe,
+ .remove = __devexit_p(mcp251x_can_remove),
+ .suspend = mcp251x_can_suspend,
+ .resume = mcp251x_can_resume,
+};
+
+static int __init mcp251x_can_init(void)
+{
+ return spi_register_driver(&mcp251x_can_driver);
+}
+
+static void __exit mcp251x_can_exit(void)
+{
+ spi_unregister_driver(&mcp251x_can_driver);
+}
+
+module_init(mcp251x_can_init);
+module_exit(mcp251x_can_exit);
+
+MODULE_AUTHOR("Chris Elston <celston@...alix.com>, "
+ "Christian Pellegrin <chripell@...lware.org>");
+MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
new file mode 100644
index 0000000..1448177
--- /dev/null
+++ b/include/linux/can/platform/mcp251x.h
@@ -0,0 +1,36 @@
+#ifndef __CAN_PLATFORM_MCP251X_H__
+#define __CAN_PLATFORM_MCP251X_H__
+
+/*
+ *
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ */
+
+#include <linux/spi/spi.h>
+
+/**
+ * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
+ * @oscillator_frequency: - oscillator frequency in Hz
+ * @model: - actual type of chip
+ * @board_specific_setup: - called before probing the chip (power,reset)
+ * @transceiver_enable: - called to power on/off the transceiver
+ * @power_enable: - called to power on/off the mcp *and* the
+ * transceiver
+ *
+ * Please note that you should define power_enable or transceiver_enable or
+ * none of them. Defining both of them is no use.
+ *
+ */
+
+struct mcp251x_platform_data {
+ unsigned long oscillator_frequency;
+ int model;
+#define CAN_MCP251X_MCP2510 0
+#define CAN_MCP251X_MCP2515 1
+ int (*board_specific_setup)(struct spi_device *spi);
+ int (*transceiver_enable)(int enable);
+ int (*power_enable) (int enable);
+};
+
+#endif /* __CAN_PLATFORM_MCP251X_H__ */
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists