| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4AF09A15.3060504@gmail.com> Date: Tue, 03 Nov 2009 22:01:09 +0100 From: Gertjan van Wingerde <gwingerde@...il.com> To: Bartlomiej Zolnierkiewicz <bzolnier@...il.com> CC: linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org, netdev@...r.kernel.org, Ivo van Doorn <ivdoorn@...il.com>, Randy Dunlap <rdunlap@...otime.net>, Luis Correia <luis.f.correia@...il.com>, "John W. Linville" <linville@...driver.com>, Ingo Molnar <mingo@...e.hu>, Johannes Berg <johannes@...solutions.net>, Jarek Poplawski <jarkao2@...il.com>, Pekka Enberg <penberg@...helsinki.fi>, David Miller <davem@...emloft.net> Subject: Re: [announce] new rt2800 drivers for Ralink wireless & project tree Hi, On 11/03/09 19:51, Bartlomiej Zolnierkiewicz wrote: > > Hi, > > The following patch series (against wireless-next) addresses issues raised > during code review and subsequently rejected by rt2x00/wireless/networking > maintainers. > This seems to be a misrepresentation of the situation. The issues raised by you were acknowledged as being valid, however they were not deemed important enough to stop inclusion in wireless-next and net-next. However, it is good to see that you have put effort in providing a patch series for these issues. Now, since I believe that it is better to work with people, rather than against them, would it be possible to post this patch series somewhere as a set of separate patches, so that they can be reviewed as such? --- Gertjan rt2x00 project developer > > Namely, it: > > - Adds abstraction of chipset register access for chipsets connected to > different buses by using new structure (struct rt2800_ops) which contains > all needed register access methods. > > [ It is a prerequisite for fixing code duplication between rt2800usb.c > and rt2800pci.c drivers. ] > > - Fixes code duplication in rt2800usb.h and rt2800pci.h header files by > using new shared rt2800.h header (almost 1800 LOC gone). > > Updated debugging scripts are located here: > > http://www.kernel.org/pub/linux/kernel/people/bart/rt2800/scripts/ > > (they also work fine with older drivers) > > - Adds rt2800 library containing common code for PCI and USB versions > of rt2800 chipsets. This removes over 1300 LOC and allows us to save > a lot of maintenance burden in the future. > > > It also fixes two real bugs (one in rt2800pci and one in rt2800usb) found > as a direct result of the code de-duplication: > > - Fix rt2800usb driver to write the rfcsr read request into RF_CSR_CFG > register and not BBP_CSR_CFG one in rt2800usb_rfcsr_read(). > > - Use the correct encryption key index for TX frames in rt2800pci (this is > based on rt2800usb patch from Benoit PAPILLAULT already in Linus' tree, > unfortunately the fix was not ported over to rt2800pci). > > [ There are also some minor code rt2x00 infrastructure fixes and improvements > here and there... ] > > > All in all over 3100 LOC are gone and rt2800pci specific code is: > > 1685 drivers/net/wireless/rt2x00/rt2800pci.c > 180 drivers/net/wireless/rt2x00/rt2800pci.h > 1865 total > > instead of: > > 3323 drivers/net/wireless/rt2x00/rt2800pci.c > 1960 drivers/net/wireless/rt2x00/rt2800pci.h > 5283 total > > (wireless-next and net-next trees) > > which means decrease of the code needed for rt2800pci by 65% (this in turn > translates to 31% decrease for rt2800 specific code and 9% for whole rt2x00 > infrastructure). > > The rewrite was quite conservative and there is still a room for improvement > but it should serve as a good starting base for all future work on rt2800 > drivers, and there is a lot to do there (both drivers are still practically > non-functional). > > Comments and patches are welcomed. > > > The following changes since commit fa867e7355a1bdcd9bf7d55ebe9296f5b9c4028a: > Juuso Oikarinen (1): > wl1271: Generalize command response reading > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/bart/misc.git rt2800 > > Bartlomiej Zolnierkiewicz (40): > rt2800usb: fix rt2800usb_rfcsr_read() > rt2800pci: fix crypto in TX frame > rt2800pci: fix comment about register access > rt2800pci: fix comment about IV/EIV fields > rt2x00: fix rt2x00usb_register_read() comment > rt2800usb: use rt2x00usb_register_multiwrite() to set key entries > rt2800usb: add rt2800_register_[read,write]() wrappers > rt2800pci: add rt2800_register_[read,write]() wrappers > rt2800usb: add rt2800_register_multi[read,write]() wrappers > rt2800pci: add rt2800_register_multi[read,write]() wrappers > rt2800usb: add rt2800_regbusy_read() wrapper > rt2800pci: add rt2800_regbusy_read() wrapper > rt2800usb: add rt2800_bbp_[read,write]() wrappers > rt2800pci: add rt2800_bbp_[read,write]() wrappers > rt2800usb: add rt2800_rfcsr_[read,write]() wrappers > rt2800pci: add rt2800_rfcsr_[read,write]() wrappers > rt2800usb: add rt2800_rf_[read,write]() wrappers > rt2800pci: add rt2800_rf_[read,write]() wrappers > rt2800usb: add rt2800_mcu_request() wrapper > rt2800pci: add rt2800_mcu_request() wrapper > rt2x00: add driver private field to struct rt2x00_dev > rt2800usb: convert to use struct rt2800_ops methods > rt2800pci: convert to use struct rt2800_ops methods > rt2x00: fix rt2x00usb_register_multiwrite() arguments > rt2x00: fix rt2x00usb_regbusy_read() arguments > rt2x00: fix rt2x00pci_register_multi[read,write]() arguments > rt2800: add rt2800lib.h > rt2800usb: fix comments in rt2800usb.h > rt2800usb: add RXINFO_DESC_SIZE definition > rt2800: fix duplication in header files > rt2800: fix comments in rt2800.h > rt2x00: add support for different chipset interfaces > rt2800: prepare for rt2800lib addition > rt2800: add rt2800lib (part one) > rt2x00: remove needless ifdefs from rt2x00leds.h > rt2800: add rt2800lib (part two) > rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h > rt2800: add rt2800lib (part three) > rt2800: add rt2800lib (part four) > MAINTAINERS: add rt2800 entry > > MAINTAINERS | 7 + > drivers/net/wireless/rt2x00/Kconfig | 5 + > drivers/net/wireless/rt2x00/Makefile | 1 + > drivers/net/wireless/rt2x00/rt2800.h | 1816 ++++++++++++++++++++++++++++ > drivers/net/wireless/rt2x00/rt2800lib.c | 1817 ++++++++++++++++++++++++++++ > drivers/net/wireless/rt2x00/rt2800lib.h | 134 +++ > drivers/net/wireless/rt2x00/rt2800pci.c | 1908 +++--------------------------- > drivers/net/wireless/rt2x00/rt2800pci.h | 1780 ---------------------------- > drivers/net/wireless/rt2x00/rt2800usb.c | 1828 ++--------------------------- > drivers/net/wireless/rt2x00/rt2800usb.h | 1818 +---------------------------- > drivers/net/wireless/rt2x00/rt2x00.h | 33 + > drivers/net/wireless/rt2x00/rt2x00leds.h | 4 - > drivers/net/wireless/rt2x00/rt2x00pci.h | 24 +- > drivers/net/wireless/rt2x00/rt2x00usb.c | 2 +- > drivers/net/wireless/rt2x00/rt2x00usb.h | 17 +- > 15 files changed, 4036 insertions(+), 7158 deletions(-) > create mode 100644 drivers/net/wireless/rt2x00/rt2800.h > create mode 100644 drivers/net/wireless/rt2x00/rt2800lib.c > create mode 100644 drivers/net/wireless/rt2x00/rt2800lib.h > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists