lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091106120720.GA19198@serverengines.com> Date: Fri, 6 Nov 2009 17:37:32 +0530 From: Ajit Khaparde <ajitk@...verengines.com> To: David Miller <davem@...emloft.net> Cc: netdev <netdev@...r.kernel.org> Subject: [PATCH 2/2] be2net: Bug fix to send config commands to hardware after netdev_register Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde <ajitk@...verengines.com> --- drivers/net/benet/be_main.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 4a7a452..876b357 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) @@ -1648,18 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, - adapter->tx_fc, adapter->rx_fc); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists