| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091113043659.1240.79193.stgit@localhost.localdomain>
Date: Thu, 12 Nov 2009 20:37:00 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com,
Alexander Duyck <alexander.h.duyck@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 PATCH 2/7] igb: move timesync init into a seperate
function
From: Alexander Duyck <alexander.h.duyck@...el.com>
Current code is quite large and making igb_probe difficult to read.
Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/igb/igb_main.c | 115 +++++++++++++++++++++++++-------------------
1 files changed, 65 insertions(+), 50 deletions(-)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index b044c98..d72d484 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1566,56 +1566,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
}
#endif
- switch (hw->mac.type) {
- case e1000_82576:
- /*
- * Initialize hardware timer: we keep it running just in case
- * that some program needs it later on.
- */
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * substracted at each clock tick. The drawbacks of a large
- * factor are a) that the clock register overflows more quickly
- * (not such a big deal) and b) that the increment per tick has
- * to fit into 24 bits. As a result we need to use a shift of
- * 19 so we can fit a value of 16 into the TIMINCA register.
- */
- adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
- wr32(E1000_TIMINCA,
- (1 << E1000_TIMINCA_16NS_SHIFT) |
- (16 << IGB_82576_TSYNC_SHIFT));
-
- /* Set registers so that rollover occurs soon to test this. */
- wr32(E1000_SYSTIML, 0x00000000);
- wr32(E1000_SYSTIMH, 0xFF800000);
- wrfl();
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82575:
- /* 82575 does not support timesync */
- default:
- break;
- }
-
dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
/* print bus type/speed/width info */
dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
@@ -1781,6 +1731,70 @@ static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
#endif /* CONFIG_PCI_IOV */
}
+
+/**
+ * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
+ * @adapter: board private structure to initialize
+ *
+ * igb_init_hw_timer initializes the function pointer and values for the hw
+ * timer found in hardware.
+ **/
+static void igb_init_hw_timer(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ /*
+ * Initialize hardware timer: we keep it running just in case
+ * that some program needs it later on.
+ */
+ memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+ adapter->cycles.read = igb_read_clock;
+ adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+ adapter->cycles.mult = 1;
+ /**
+ * Scale the NIC clock cycle by a large factor so that
+ * relatively small clock corrections can be added or
+ * substracted at each clock tick. The drawbacks of a large
+ * factor are a) that the clock register overflows more quickly
+ * (not such a big deal) and b) that the increment per tick has
+ * to fit into 24 bits. As a result we need to use a shift of
+ * 19 so we can fit a value of 16 into the TIMINCA register.
+ */
+ adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+ wr32(E1000_TIMINCA,
+ (1 << E1000_TIMINCA_16NS_SHIFT) |
+ (16 << IGB_82576_TSYNC_SHIFT));
+
+ /* Set registers so that rollover occurs soon to test this. */
+ wr32(E1000_SYSTIML, 0x00000000);
+ wr32(E1000_SYSTIMH, 0xFF800000);
+ wrfl();
+
+ timecounter_init(&adapter->clock,
+ &adapter->cycles,
+ ktime_to_ns(ktime_get_real()));
+ /*
+ * Synchronize our NIC clock against system wall clock. NIC
+ * time stamp reading requires ~3us per sample, each sample
+ * was pretty stable even under load => only require 10
+ * samples for each offset comparison.
+ */
+ memset(&adapter->compare, 0, sizeof(adapter->compare));
+ adapter->compare.source = &adapter->clock;
+ adapter->compare.target = ktime_get_real;
+ adapter->compare.num_samples = 10;
+ timecompare_update(&adapter->compare, 0);
+ break;
+ case e1000_82575:
+ /* 82575 does not support timesync */
+ default:
+ break;
+ }
+
+}
+
/**
* igb_sw_init - Initialize general software structures (struct igb_adapter)
* @adapter: board private structure to initialize
@@ -1816,6 +1830,7 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter)
return -ENOMEM;
}
+ igb_init_hw_timer(adapter);
igb_probe_vfs(adapter);
/* Explicitly disable IRQ since the NIC can be in any state. */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists