| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1258490898.21197.42.camel@johannes.local>
Date: Tue, 17 Nov 2009 21:48:18 +0100
From: Johannes Berg <johannes@...solutions.net>
To: netdev <netdev@...r.kernel.org>
Cc: linux-wireless <linux-wireless@...r.kernel.org>,
Stephen Hemminger <shemminger@...tta.com>,
Felix Fietkau <nbd@...nwrt.org>
Subject: [RFC v2] mac80211: disallow bridging managed/adhoc interfaces
A number of people have tried to add a wireless interface
(in managed mode) to a bridge and then complained that it
doesn't work. It cannot work, however, because in 802.11
networks all packets need to be acknowledged and as such
need to be sent to the right address. Promiscuous doesn't
help here. The wireless address format used for these
links has only space for three addresses, the
* transmitter, which must be equal to the sender (origin)
* receiver (on the wireless medium), which is the AP in
the case of managed mode
* the recipient (destination), which is on the APs local
network segment
In an IBSS, it is similar, but the receiver and recipient
must match and the third address is used as the BSSID.
To avoid such mistakes in the future, disallow adding a
wireless interface to a bridge.
Felix has recently added a four-address mode to the AP
and client side that can be used (after negotiating that
it is possible, which must happen out-of-band by setting
up both sides) for bridging, so allow that case.
Signed-off-by: Johannes Berg <johannes@...solutions.net>
---
v2: * change error code as requested by Michael
* disallow changing wireless mode on a bridged iface
Should more (all?) of this be in cfg80211?
include/linux/if.h | 1 +
net/bridge/br_if.c | 4 ++++
net/mac80211/cfg.c | 9 ++++++++-
net/mac80211/iface.c | 22 ++++++++++++++++++++--
4 files changed, 33 insertions(+), 3 deletions(-)
--- wireless-testing.orig/include/linux/if.h 2009-11-17 14:18:36.000000000 +0100
+++ wireless-testing/include/linux/if.h 2009-11-17 14:19:04.000000000 +0100
@@ -70,6 +70,7 @@
#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
* release skb->dst
*/
+#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
--- wireless-testing.orig/net/bridge/br_if.c 2009-11-17 14:19:17.000000000 +0100
+++ wireless-testing/net/bridge/br_if.c 2009-11-17 15:07:59.000000000 +0100
@@ -390,6 +390,10 @@ int br_add_if(struct net_bridge *br, str
if (dev->br_port != NULL)
return -EBUSY;
+ /* No bridging devices that dislike that (e.g. wireless) */
+ if (dev->priv_flags & IFF_DONT_BRIDGE)
+ return -EOPNOTSUPP;
+
p = new_nbp(br, dev);
if (IS_ERR(p))
return PTR_ERR(p);
--- wireless-testing.orig/net/mac80211/cfg.c 2009-11-17 14:21:24.000000000 +0100
+++ wireless-testing/net/mac80211/cfg.c 2009-11-17 14:37:13.000000000 +0100
@@ -106,8 +106,15 @@ static int ieee80211_change_iface(struct
params->mesh_id_len,
params->mesh_id);
- if (params->use_4addr >= 0)
+ if (params->use_4addr >= 0) {
sdata->use_4addr = !!params->use_4addr;
+ sdata->dev->priv_flags &= ~IFF_DONT_BRIDGE;
+
+ if ((sdata->vif.type == NL80211_IFTYPE_STATION ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC) &&
+ !sdata->use_4addr)
+ sdata->dev->priv_flags |= IFF_DONT_BRIDGE;
+ }
if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags)
return 0;
--- wireless-testing.orig/net/mac80211/iface.c 2009-11-17 14:20:19.000000000 +0100
+++ wireless-testing/net/mac80211/iface.c 2009-11-17 17:56:08.000000000 +0100
@@ -745,6 +745,11 @@ int ieee80211_if_change_type(struct ieee
if (type == sdata->vif.type)
return 0;
+ /* if it's part of a bridge, reject changing type to station/ibss */
+ if (sdata->dev->br_port && (type == NL80211_IFTYPE_ADHOC ||
+ type == NL80211_IFTYPE_STATION))
+ return -EBUSY;
+
/* Setting ad-hoc mode on non-IBSS channel is not supported. */
if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
type == NL80211_IFTYPE_ADHOC)
@@ -769,6 +774,11 @@ int ieee80211_if_change_type(struct ieee
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
sdata->use_4addr = 0;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ sdata->dev->priv_flags |= IFF_DONT_BRIDGE;
+ else
+ sdata->dev->priv_flags &= ~IFF_DONT_BRIDGE;
return 0;
}
@@ -843,8 +853,16 @@ int ieee80211_if_add(struct ieee80211_lo
params->mesh_id_len,
params->mesh_id);
- if (params && params->use_4addr >= 0)
- sdata->use_4addr = !!params->use_4addr;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ sdata->dev->priv_flags |= IFF_DONT_BRIDGE;
+ else
+ sdata->dev->priv_flags &= ~IFF_DONT_BRIDGE;
+
+ if (params && params->use_4addr > 0) {
+ sdata->use_4addr = true;
+ sdata->dev->priv_flags &= ~IFF_DONT_BRIDGE;
+ }
mutex_lock(&local->iflist_mtx);
list_add_tail_rcu(&sdata->list, &local->interfaces);
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists