| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1258529958.2810.36.camel@localhost>
Date: Wed, 18 Nov 2009 07:39:18 +0000
From: Ben Hutchings <ben@...adent.org.uk>
To: netdev@...r.kernel.org
Cc: Michel Messerschmidt <lists@...hel-messerschmidt.de>,
556587@...s.debian.org
Subject: nf_conntrack sets wrong value for ctorigsrc parameter
From the Debian bug tracking system:
-------- Forwarded Message --------
From: Michel Messerschmidt <lists@...hel-messerschmidt.de>
Reply-to: Michel Messerschmidt <lists@...hel-messerschmidt.de>, 556587@...s.debian.org
To: Debian Bug Tracking System <submit@...s.debian.org>
Subject: Bug#556587: linux-image-2.6.31-1-686-bigmem: nf_conntrack sets wrong value for ctorigsrc parameter
Date: Mon, 16 Nov 2009 23:09:10 +0100
Package: linux-2.6
Version: 2.6.31-2
Severity: normal
My iptables script using the conntrack module does not work with this kernel
version anymore. The value of the ctorigsrc parameter is not set correctly:
rei:~$ cat /etc/mm_iptables/mm_iptables_dmz | grep -E 'ctorig|LOCALIP='
LOCALIP="192.168.40.3"
$IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctproto udp --ctorigsrc $LOCALIP --ctorigdstport 53 --ctreplsrcport 53 -j ACCEPT
$IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctstate RELATED,ESTABLISHED --ctproto udp --ctorigsrc $LOCALIP -j ACCEPT
rei:~$ iptables -nvL | grep ctorig
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.60.154.245 ctorigdstport 53 ctreplsrcport 53
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 ctorigsrc 128.49.154.245
I see the same behavior with the 686 flavour (without bigmem).
With older kernels up to 2.6.30-8, the ctorigsrc value was set as expected:
rei:~$ iptables -nvL | grep ctorig
21 2452 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.168.40.3 ctorigdstport 53 ctreplsrcport 53
0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 ctorigsrc 192.168.40.3
-- Package-specific info:
** Version:
Linux version 2.6.31-1-686-bigmem (Debian 2.6.31-2) (ben@...adent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 21:22:56 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.31-1-686-bigmem root=/dev/mapper/sda2_crypt ro vdso=1
** Not tainted
** Kernel log:
[ 252.421890] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.150.205 DST=192.168.40.3 LEN=126 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=25586 LEN=106
[ 252.425260] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.149.142 DST=192.168.40.3 LEN=126 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=25586 LEN=106
[ 252.425929] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.150.205 DST=192.168.40.3 LEN=144 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=42698 LEN=124
[ 252.429781] FW-DROP-DEFAULT IN=eth1 OUT= MAC=00:08:54:50:08:d8:00:16:38:aa:fd:00:08:00 SRC=217.237.149.142 DST=192.168.40.3 LEN=144 TOS=0x00 PREC=0x00 TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=42698 LEN=124
[...cut many repeated log messages...]
** Model information
not available
** Loaded modules:
Module Size Used by
tun 13120 2
video 19856 0
output 2872 1 video
ac 3124 0
battery 6348 0
acpi_cpufreq 8104 0
cpufreq_userspace 2944 0
cpufreq_conservative 6780 0
cpufreq_powersave 1408 0
cpufreq_stats 3868 0
nfsd 223620 9
exportfs 4016 1 nfsd
nfs 252000 0
lockd 64696 2 nfsd,nfs
fscache 36696 1 nfs
nfs_acl 2860 2 nfsd,nfs
auth_rpcgss 34388 2 nfsd,nfs
sunrpc 181096 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipt_MASQUERADE 2400 1
iptable_nat 5596 1
xt_TCPMSS 3604 1
xt_conntrack 4028 36
xt_tcpudp 2716 195
ip6t_LOG 4864 1
ipt_LOG 4784 39
ip6table_filter 3312 1
ip6_tables 12000 2 ip6t_LOG,ip6table_filter
iptable_filter 3240 1
nf_nat 17316 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ftp 6592 0
nf_conntrack_ipv4 13120 39 iptable_nat,nf_nat
nf_conntrack 64156 6 ipt_MASQUERADE,iptable_nat,xt_conntrack,nf_nat,nf_conntrack_ftp,nf_conntrack_ipv4
nf_defrag_ipv4 1808 1 nf_conntrack_ipv4
ip_tables 10764 2 iptable_nat,iptable_filter
x_tables 16084 9 ipt_MASQUERADE,iptable_nat,xt_TCPMSS,xt_conntrack,xt_tcpudp,ip6t_LOG,ipt_LOG,ip6_tables,ip_tables
fuse 58196 1
ext2 58996 1
hwmon_vid 2576 0
eeprom 5184 0
firewire_sbp2 14016 0
loop 14268 0
snd_ca0106 32032 0
snd_rawmidi 20452 1 snd_ca0106
snd_seq_device 6780 1 snd_rawmidi
snd_ac97_codec 99668 1 snd_ca0106
snd_pcsp 9540 0
ac97_bus 1628 1 snd_ac97_codec
i2c_i801 8952 0
snd_pcm 70136 3 snd_ca0106,snd_ac97_codec,snd_pcsp
snd_timer 19000 1 snd_pcm
i2c_core 21744 2 eeprom,i2c_i801
rng_core 3996 0
snd 54440 7 snd_ca0106,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcsp,snd_pcm,snd_timer
soundcore 6844 1 snd
snd_page_alloc 8716 2 snd_ca0106,snd_pcm
evdev 8832 3
button 5488 0
processor 36772 1 acpi_cpufreq
ext4 284896 8
mbcache 7488 2 ext2,ext4
jbd2 73892 1 ext4
crc16 1840 1 ext4
cbc 3352 9
dm_crypt 12340 9
dm_mod 65432 40 dm_crypt
sd_mod 31840 7
crc_t10dif 1716 1 sd_mod
ide_pci_generic 3784 0
ide_core 97736 1 ide_pci_generic
ata_generic 4500 0
ahci 33412 0
ata_piix 21532 5
uhci_hcd 20568 0
libata 163228 3 ata_generic,ahci,ata_piix
firewire_ohci 20740 0
firewire_core 45276 2 firewire_sbp2,firewire_ohci
crc_itu_t 1892 1 firewire_core
r8169 30624 0
mii 5048 1 r8169
ehci_hcd 32868 0
scsi_mod 143036 3 firewire_sbp2,sd_mod,libata
tg3 97292 0
libphy 23160 1 tg3
usbcore 141496 4 uhci_hcd,ehci_hcd
nls_base 7188 1 usbcore
intel_agp 25752 1
agpgart 33112 1 intel_agp
thermal 13720 0
fan 4460 0
thermal_sys 14396 4 video,processor,thermal,fan
aes_i586 8312 18
aes_generic 27640 1 aes_i586
sha256_generic 11492 0
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
post-up /etc/mm_iptables/mm_iptables_init start
# The primary network interface
# really use hotplug ???
#allow-hotplug eth0
auto eth0
iface eth0 inet static
address 192.168.42.3
netmask 255.255.255.0
broadcast 192.168.42.255
# gateway must not be set here to allow dialup connections
#gateway 192.168.42.3
# hardware address (MAC)
# hwaddress ether
# set MTU for ethernet only network
mtu 1500
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.42.3
dns-search matrix
# handle firewall rules for this interface
post-up /etc/mm_iptables/mm_iptables_localnet start
pre-down /etc/mm_iptables/mm_iptables_localnet stop || true
auto eth1
iface eth1 inet static
address 192.168.40.3
netmask 255.255.255.0
broadcast 192.168.40.255
# gateway must not be set here to allow dialup connections
gateway 192.168.40.1
# hardware address (MAC)
# hwaddress ether
# set MTU for dialup / dsl / internet
mtu 1492
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.42.3
dns-search home
# handle firewall rules for this interface
post-up /etc/mm_iptables/mm_iptables_dmz start
pre-down /etc/mm_iptables/mm_iptables_dmz stop || true
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:08:54:50:08:d8 brd ff:ff:ff:ff:ff:ff
inet 192.168.40.3/24 brd 192.168.40.255 scope global eth1
inet6 fe80::208:54ff:fe50:8d8/64 scope link
valid_lft forever preferred_lft forever
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:30:1b:ba:73:70 brd ff:ff:ff:ff:ff:ff
inet 192.168.42.3/24 brd 192.168.42.255 scope global eth0
inet6 fe80::230:1bff:feba:7370/64 scope link
valid_lft forever preferred_lft forever
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/[65534]
inet 10.1.41.3 peer 10.1.41.10/32 scope global tun0
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 18976 258 0 0 0 0 0 0 18976 258 0 0 0 0 0 0
eth1: 48518 332 0 0 0 0 0 0 30390 378 0 0 0 0 0 0
eth0: 84454 855 0 0 0 0 0 0 115085 537 0 0 0 0 0 0
tun0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1475 total packets received
70 forwarded
0 incoming packets discarded
1105 incoming packets delivered
1146 requests sent out
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
InType3: 1
OutType3: 1
Tcp:
4 active connections openings
2 passive connection openings
4 failed connection attempts
0 connection resets received
2 connections established
727 segments received
452 segments send out
0 segments retransmited
0 bad segments received.
9 resets sent
Udp:
377 packets received
1 packets to unknown port received.
0 packet receive errors
627 packets sent
UdpLite:
TcpExt:
4 delayed acks sent
4 packets directly queued to recvmsg prequeue.
230 packet headers predicted
45 acknowledgments not containing data payload received
376 predicted acknowledgments
IpExt:
InBcastPkts: 48
OutBcastPkts: 48
InOctets: 136879
OutOctets: 148461
InBcastOctets: 5833
OutBcastOctets: 5833
*** Device features:
eth0: 0x109a3
eth1: 0x180
lo: 0x13865
tun0: 0x0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ff00 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dff80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 00000000dfa00000-00000000dfafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: df900000-df9fffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 11)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:fd11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfdf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at be00 [size=256]
Region 2: Memory at df9ff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at df800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:09.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at df00 [size=32]
Capabilities: <access denied>
Kernel driver in use: CA0106
03:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at de00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.31-1-686-bigmem (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.31-1-686-bigmem recommends:
ii firmware-linux-free 2.6.31-2 Binary firmware for various driver
ii libc6-i686 2.10.1-7 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.31-1-686-bigmem suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.18 Binary firmware for various driver
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.31-1-686-bigmem/postinst/bootloader-error-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/postinst/depmod-error-initrd-2.6.31-1-686-bigmem: false
linux-image-2.6.31-1-686-bigmem/prerm/removing-running-kernel-2.6.31-1-686-bigmem: true
linux-image-2.6.31-1-686-bigmem/postinst/bootloader-test-error-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/postinst/missing-firmware-2.6.31-1-686-bigmem:
linux-image-2.6.31-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.31-1-686-bigmem: true
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.31-1-686-bigmem recommends:
ii firmware-linux-free 2.6.31-2 Binary firmware for various driver
ii libc6-i686 2.10.1-7 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.31-1-686-bigmem suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.18 Binary firmware for various driver
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
Download attachment "signature.asc" of type "application/pgp-signature" (829 bytes)
Powered by blists - more mailing lists