lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B056158.5060104@embedded-sol.com>
Date:	Thu, 19 Nov 2009 17:16:40 +0200
From:	Felix Radensky <felix@...edded-sol.com>
To:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linuxppc-dev@...abs.org" <linuxppc-dev@...abs.org>
Subject: tg3: link is permanently down after ifdown and ifup

Hi,

I have a problem with tg3 driver on a custom MPC8536 based board
running linux-2.6.31, with tg3 and Broadcom phy drivers taken from
linux-2.6.32-rc7. Broadcom NIC is BCM57760, phy is BCM57780.

The problem I'm seeing is that the downing and interface leads to
permanent link loss, even after interface is upped again. E.g, to
reproduce the problem it is sufficient to run:

modprobe tg3
ifconfig eth2 up
ifconfig eth2 down
ifconfig eth2 up

After ifdown PHY LEDs also go down and do not come back
after ifup. Ethtool reports that no link is detected. After reloading
the driver the link comes back.

Am I the only one seeing this problem  ?
Any help on fixing this is appreciated.

Thanks a lot.

Felix.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ