[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1259502180.3709.45.camel@localhost>
Date: Sun, 29 Nov 2009 13:43:00 +0000
From: Ben Hutchings <bhutchings@...arflare.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH 06/12] sfc: Generalise link state monitoring
From: Steve Hodgson <shodgson@...arflare.com>
Use the efx_nic_type::monitor operation or event handling as
appropriate.
Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
drivers/net/sfc/efx.c | 16 ++++++++-
drivers/net/sfc/selftest.c | 79 ++++++++++++++++++++++++++------------------
2 files changed, 61 insertions(+), 34 deletions(-)
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 4210121..14ef27f 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1174,10 +1174,18 @@ static void efx_start_all(struct efx_nic *efx)
falcon_enable_interrupts(efx);
- /* Start the hardware monitor (if there is one) if we're in RUNNING */
- if (efx->state == STATE_RUNNING && efx->type->monitor != NULL)
+ /* Start the hardware monitor if there is one. Otherwise (we're link
+ * event driven), we have to poll the PHY because after an event queue
+ * flush, we could have a missed a link state change */
+ if (efx->type->monitor != NULL) {
queue_delayed_work(efx->workqueue, &efx->monitor_work,
efx_monitor_interval);
+ } else {
+ mutex_lock(&efx->mac_lock);
+ if (efx->phy_op->poll(efx))
+ efx_link_status_changed(efx);
+ mutex_unlock(&efx->mac_lock);
+ }
efx->type->start_stats(efx);
}
@@ -1421,6 +1429,10 @@ static int efx_net_open(struct net_device *net_dev)
if (efx->phy_mode & PHY_MODE_SPECIAL)
return -EBUSY;
+ /* Notify the kernel of the link state polled during driver load,
+ * before the monitor starts running */
+ efx_link_status_changed(efx);
+
efx_start_all(efx);
return 0;
}
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index dddeb9d..f45bf74 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -563,14 +563,49 @@ efx_test_loopback(struct efx_tx_queue *tx_queue,
return 0;
}
+/* Wait for link up. On Falcon, we would prefer to rely on efx_monitor, but
+ * any contention on the mac lock (via e.g. efx_mac_mcast_work) causes it
+ * to delay and retry. Therefore, it's safer to just poll directly. Wait
+ * for link up and any faults to dissipate. */
+static int efx_wait_for_link(struct efx_nic *efx)
+{
+ struct efx_link_state *link_state = &efx->link_state;
+ int count;
+ bool link_up;
+
+ for (count = 0; count < 40; count++) {
+ schedule_timeout_uninterruptible(HZ / 10);
+
+ if (efx->type->monitor != NULL) {
+ mutex_lock(&efx->mac_lock);
+ efx->type->monitor(efx);
+ mutex_unlock(&efx->mac_lock);
+ } else {
+ struct efx_channel *channel = &efx->channel[0];
+ if (channel->work_pending)
+ efx_process_channel_now(channel);
+ }
+
+ mutex_lock(&efx->mac_lock);
+ link_up = link_state->up;
+ if (link_up)
+ link_up = !efx->mac_op->check_fault(efx);
+ mutex_unlock(&efx->mac_lock);
+
+ if (link_up)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
static int efx_test_loopbacks(struct efx_nic *efx, struct efx_self_tests *tests,
unsigned int loopback_modes)
{
enum efx_loopback_mode mode;
struct efx_loopback_state *state;
struct efx_tx_queue *tx_queue;
- bool link_up;
- int count, rc = 0;
+ int rc = 0;
/* Set the port loopback_selftest member. From this point on
* all received packets will be dropped. Mark the state as
@@ -589,43 +624,23 @@ static int efx_test_loopbacks(struct efx_nic *efx, struct efx_self_tests *tests,
/* Move the port into the specified loopback mode. */
state->flush = true;
+ mutex_lock(&efx->mac_lock);
efx->loopback_mode = mode;
- efx_reconfigure_port(efx);
-
- /* Wait for the PHY to signal the link is up. Interrupts
- * are enabled for PHY's using LASI, otherwise we poll()
- * quickly */
- count = 0;
- do {
- struct efx_channel *channel = &efx->channel[0];
-
- efx->phy_op->poll(efx);
- schedule_timeout_uninterruptible(HZ / 10);
- if (channel->work_pending)
- efx_process_channel_now(channel);
- /* Wait for PHY events to be processed */
- flush_workqueue(efx->workqueue);
- rmb();
-
- /* We need both the PHY and MAC-PHY links to be OK */
- link_up = efx->link_state.up;
- if (link_up)
- link_up = !efx->mac_op->check_fault(efx);
-
- } while ((++count < 20) && !link_up);
+ rc = __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+ if (rc) {
+ EFX_ERR(efx, "unable to move into %s loopback\n",
+ LOOPBACK_MODE(efx));
+ goto out;
+ }
- /* The link should now be up. If it isn't, there is no point
- * in attempting a loopback test */
- if (!link_up) {
+ rc = efx_wait_for_link(efx);
+ if (rc) {
EFX_ERR(efx, "loopback %s never came up\n",
LOOPBACK_MODE(efx));
- rc = -EIO;
goto out;
}
- EFX_LOG(efx, "link came up in %s loopback in %d iterations\n",
- LOOPBACK_MODE(efx), count);
-
/* Test every TX queue */
efx_for_each_tx_queue(tx_queue, efx) {
state->offload_csum = (tx_queue->queue ==
--
1.6.5.3
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists