Add support for writing data to EEPROM. Signed-off-by: Ben Dooks Cc: Wolfram Sang Cc: Jean Delvare Cc: Linux Kernel --- drivers/misc/eeprom/eeprom_93cx6.c | 86 +++++++++++++++++++++++++++++++++++++ include/linux/eeprom_93cx6.h | 7 +++ 2 files changed, 93 insertions(+) Index: b/drivers/misc/eeprom/eeprom_93cx6.c =================================================================== --- a/drivers/misc/eeprom/eeprom_93cx6.c 2009-10-06 15:51:18.000000000 +0100 +++ b/drivers/misc/eeprom/eeprom_93cx6.c 2009-10-06 15:54:36.000000000 +0100 @@ -241,3 +241,89 @@ void eeprom_93cx6_multiread(struct eepro } EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread); + +/** + * eeprom_93cx6_wren - set the write enable state + * @eeprom: Pointer to eeprom structure + * @enable: true to enable writes, otherwise disable writes + * + * Set the EEPROM write enable state to either allow or deny + * writes depending on the @enable value. + */ +void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable) +{ + u16 command; + + /* start the command */ + eeprom_93cx6_startup(eeprom); + + /* create command to enable/disable */ + + command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE; + command <<= (eeprom->width - 2); + + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_wren); + +/** + * eeprom_93cx6_write - write data to the EEPROM + * @eeprom: Pointer to eeprom structure + * @addr: Address to write data to. + * @data: The data to write to address @addr. + * + * Write the @data to the specified @addr in the EEPROM and + * waiting for the device to finish writing. + * + * Note, since we do not expect large number of write operations + * we use msleep() to delay in between parts of the operation to + * avoid using excessive amounts of CPU time busy waiting. + */ +void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data) +{ + int timeout = 100; + u16 command; + + /* start the command */ + eeprom_93cx6_startup(eeprom); + + command = PCI_EEPROM_WRITE_OPCODE << eeprom->width; + command |= addr; + + /* send write command */ + eeprom_93cx6_write_bits(eeprom, command, + PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + + /* send data */ + eeprom_93cx6_write_bits(eeprom, data, 16); + + /* get ready to check for busy */ + eeprom->drive_data = 0; + eeprom->reg_chip_select = 1; + eeprom->register_write(eeprom); + + /* wait at-least 250ns to get DO to be the busy signal */ + msleep(1); + + /* wait for DO to go high to signify finish */ + + while (true) { + eeprom->register_read(eeprom); + + if (eeprom->reg_data_out) + break; + + msleep(1); + + if (--timeout <= 0) { + printk(KERN_ERR "%s: timeout\n", __func__); + break; + } + } + + eeprom_93cx6_cleanup(eeprom); +} +EXPORT_SYMBOL_GPL(eeprom_93cx6_write); Index: b/include/linux/eeprom_93cx6.h =================================================================== --- a/include/linux/eeprom_93cx6.h 2009-10-06 15:51:18.000000000 +0100 +++ b/include/linux/eeprom_93cx6.h 2009-10-06 15:53:16.000000000 +0100 @@ -32,6 +32,7 @@ #define PCI_EEPROM_WIDTH_93C66 8 #define PCI_EEPROM_WIDTH_OPCODE 3 #define PCI_EEPROM_WRITE_OPCODE 0x05 +#define PCI_EEPROM_ERASE_OPCODE 0x07 #define PCI_EEPROM_READ_OPCODE 0x06 #define PCI_EEPROM_EWDS_OPCODE 0x10 #define PCI_EEPROM_EWEN_OPCODE 0x13 @@ -73,3 +74,9 @@ extern void eeprom_93cx6_read(struct eep const u8 word, u16 *data); extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word, __le16 *data, const u16 words); + +extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); + +extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, + u8 addr, u16 data); + -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html