/*
 * Routerboard RB600 Device Tree Source
 */

/dts-v1/;

/ {
	model = "RB600";
	compatible = "MPC83xx";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
	};


	chosen {
		linux,stdout-path = "/soc8343@e0000000/serial@4500";
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8343E@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <0x20>;
			i-cache-line-size = <0x20>;
			d-cache-size = <0x8000>;
			i-cache-size = <0x8000>;
			timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
			clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
		};
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
	};

	cf@f9200000 {
		lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
		interrupt-at-level = <0x0>;
		interrupt-parent = <&ipic>;
		interrupts = <0x16 0x8>;
		lbc_extra_divider = <0x1>;
		reg = <0xf9200000 0x200000>;
		device_type = "rb,cf";
	};

	cf@f9000000 {
		lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
		interrupt-at-level = <0x0>;
		interrupt-parent = <&ipic>;
		interrupts = <0x14 0x8>;
		lbc_extra_divider = <0x1>;
		reg = <0xf9000000 0x200000>;
		device_type = "rb,cf";
	};

	flash {
		reg = <0xff800000 0x20000>;
	};

	nnand {
		reg = <0xf0000000 0x1000>;
	};

	nand {
		ale = <&gpio 0x6>;
		cle = <&gpio 0x5>;
		nce = <&gpio 0x4>;
		rdy = <&gpio 0x3>;
		reg = <0xf8000000 0x1000>;
		device_type = "rb,nand";
	};

	fancon {
		interrupt-parent = <&ipic>;
		interrupts = <0x17 0x8>;
		sense = <&gpio 0x7>;
		fan_on = <&gpio 0x9>;
	};

	pci0: pci@e0008500 {
		device_type = "pci";
		compatible = "fsl,mpc8349-pci";
		reg = <0xe0008500 0x100 0xe0008300 0x8>;
		#address-cells = <3>;
		#size-cells = <2>;
		#interrupt-cells = <1>;
		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
		bus-range = <0x0 0x0>;
		interrupt-map = <
		0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
		0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
		0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
		0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
		0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
		0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
		0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
		0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
		0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
		0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
		0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
		0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
		0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
		0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
		0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
		0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
		0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
		0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
		0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
		0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
		0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-parent = <&ipic>;
		};


	soc8343@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x0 0xe0000000 0x100000>;
		reg = <0xe0000000 0x200>;
		bus-frequency = <0x1>;

		led {
			user_led = <&gpio 0x8>;
		};

		beeper {
			reg = <0x500 0x100>;
		};

		gpio: gpio@0 {
			#gpio-cells = <2>;
			compatible = "fsl,mpc8349-gpio";
			reg = <0xc08 0x4>;
			interrupt-parent = <&ipic>;
			gpio-controller;
		};

		enet0: ethernet@25000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <0>;
			phy-handle = <&phy0>;
			tbi-handle = <&tbi0>;
			interrupt-parent = <&ipic>;
			interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
			local-mac-address = [00 00 00 00 00 00];
			reg = <0x25000 0x1000>;
			ranges = <0x0 0x25000 0x1000>;
			compatible = "gianfar";
			model = "TSEC";
			device_type = "network";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-tbi";
				reg = <0x520 0x20>;

				tbi0: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		enet1: ethernet@24000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <1>;
			phy-handle = <&phy1>;
			tbi-handle = <&tbi1>;
			interrupt-parent = <&ipic>;
			interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
			local-mac-address = [00 00 00 00 00 00];
			reg = <0x24000 0x1000>;
			ranges = <0x0 0x24000 0x1000>;
			compatible = "gianfar";
			model = "TSEC";
			device_type = "network";

			mdio@520 {
				#size-cells = <0x0>;
				#address-cells = <0x1>;
				reg = <0x520 0x20>;
				compatible = "fsl,gianfar-mdio";

				phy0: ethernet-phy@0 {
					device_type = "ethernet-phy";
					reg = <0x0>;
				};

				phy1: ethernet-phy@1 {
					device_type = "ethernet-phy";
					reg = <0x1>;
				};

				tbi1: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};



		ipic: pic@700 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x700 0x100>;
			device_type = "ipic";
		};

		serial@4500 {
			interrupt-parent = <&ipic>;
			interrupts = <0x9 0x8>;
			clock-frequency = <0xfe4f840>;
			reg = <0x4500 0x100>;
			compatible = "ns16550";
			device_type = "serial";
		};

		wdt@200 {
			reg = <0x200 0x100>;
			compatible = "mpc83xx_wdt";
			device_type = "watchdog";
		};
	};
};