| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091223144134.GA23401@serverengines.com>
Date: Wed, 23 Dec 2009 20:11:44 +0530
From: Sarveshwar Bandi <sarveshwarb@...verengines.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net
Subject: [net-2.6 PATCH 2/3] be2net: Bug fix to config NIC appropriately
before loopback test
NIC controller has to be set to an appropriate mode before doing a loopback
test. Test will fail otherwise.
Signed-off-by: Sarveshwar Bandi <sarveshwarb@...verengines.com>
---
drivers/net/benet/be_cmds.c | 35 +++++++++++++++++++++++++++++++++++
drivers/net/benet/be_cmds.h | 16 ++++++++++++++++
drivers/net/benet/be_ethtool.c | 37 +++++++++++++++++++++++--------------
3 files changed, 74 insertions(+), 14 deletions(-)
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index a27fdb3..102ade1 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1479,6 +1479,41 @@ err:
return status;
}
+int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable)
+{
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_set_lmode *req;
+ int status;
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
+
+ req = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE,
+ sizeof(*req));
+
+ req->src_port = port_num;
+ req->dest_port = port_num;
+ req->loopback_type = loopback_type;
+ req->loopback_state = enable;
+
+ status = be_mcc_notify_wait(adapter);
+err:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern)
{
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 92b87ef..c002b83 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -155,6 +155,7 @@ #define OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG
#define OPCODE_LOWLEVEL_HOST_DDR_DMA 17
#define OPCODE_LOWLEVEL_LOOPBACK_TEST 18
+#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19
struct be_cmd_req_hdr {
u8 opcode; /* dword 0 */
@@ -821,6 +822,19 @@ struct be_cmd_resp_loopback_test {
u32 ticks_compl;
};
+struct be_cmd_req_set_lmode {
+ struct be_cmd_req_hdr hdr;
+ u8 src_port;
+ u8 dest_port;
+ u8 loopback_type;
+ u8 loopback_state;
+};
+
+struct be_cmd_resp_set_lmode {
+ struct be_cmd_resp_hdr resp_hdr;
+ u8 rsvd0[4];
+};
+
/********************** DDR DMA test *********************/
struct be_cmd_req_ddrdma_test {
struct be_cmd_req_hdr hdr;
@@ -912,3 +926,5 @@ extern int be_cmd_loopback_test(struct b
u32 num_pkts, u64 pattern);
extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
u32 byte_cnt, struct be_dma_mem *cmd);
+extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 298b92c..da66d15 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -118,6 +118,7 @@ #define ETHTOOL_TESTS_NUM ARRAY_SIZE(et_
#define BE_MAC_LOOPBACK 0x0
#define BE_PHY_LOOPBACK 0x1
#define BE_ONE_PORT_EXT_LOOPBACK 0x2
+#define BE_NO_LOOPBACK 0xff
static void
be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
@@ -489,6 +490,19 @@ err:
return ret;
}
+static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
+ u64 *status)
+{
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ loopback_type, 1);
+ *status = be_cmd_loopback_test(adapter, adapter->port_num,
+ loopback_type, 1500,
+ 2, 0xabc);
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ BE_NO_LOOPBACK, 1);
+ return *status;
+}
+
static void
be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
{
@@ -497,23 +511,18 @@ be_self_test(struct net_device *netdev,
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
if (test->flags & ETH_TEST_FL_OFFLINE) {
- data[0] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_MAC_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[0] != 0)
+ if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
+ &data[0]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[1] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_PHY_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[1] != 0)
+ }
+ if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
+ &data[1]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[2] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_ONE_PORT_EXT_LOOPBACK,
- 1500, 2, 0xabc);
- if (data[2] != 0)
+ }
+ if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
+ &data[2]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
+ }
data[3] = be_test_ddr_dma(adapter);
if (data[3] != 0)
--
1.4.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists