netdev - [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in adjust

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20091224153120.GC1206@oksana.dev.rtsoft.ru>
Date:	Thu, 24 Dec 2009 18:31:20 +0300
From:	Anton Vorontsov <avorontsov@...mvista.com>
To:	David Miller <davem@...emloft.net>
Cc:	Lennart Sorensen <lsorense@...lub.uwaterloo.ca>,
	Li Yang <leoli@...escale.com>, netdev@...r.kernel.org,
	linuxppc-dev@...abs.org
Subject: [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in
 adjust_link()

If PHY doesn't have an IRQ, phylib would poll for link changes, and
would call adjust_link() every second. In that case we disable and
enable the controller every second.

Let's better check if there is actually anything changed, and, if so,
change the MAC settings.

Signed-off-by: Anton Vorontsov <avorontsov@...mvista.com>
---
 drivers/net/ucc_geth.c |   33 ++++++++++++++++++---------------
 1 files changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 7fff4c5..41ad2f3 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1651,25 +1651,28 @@ static void adjust_link(struct net_device *dev)
 			ugeth->oldspeed = phydev->speed;
 		}
 
-		/*
-		 * To change the MAC configuration we need to disable the
-		 * controller. To do so, we have to either grab ugeth->lock,
-		 * which is a bad idea since 'graceful stop' commands might
-		 * take quite a while, or we can quiesce driver's activity.
-		 */
-		ugeth_quiesce(ugeth);
-		ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
-
-		out_be32(&ug_regs->maccfg2, tempval);
-		out_be32(&uf_regs->upsmr, upsmr);
-
-		ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
-		ugeth_activate(ugeth);
-
 		if (!ugeth->oldlink) {
 			new_state = 1;
 			ugeth->oldlink = 1;
 		}
+
+		if (new_state) {
+			/*
+			 * To change the MAC configuration we need to disable
+			 * the controller. To do so, we have to either grab
+			 * ugeth->lock, which is a bad idea since 'graceful
+			 * stop' commands might take quite a while, or we can
+			 * quiesce driver's activity.
+			 */
+			ugeth_quiesce(ugeth);
+			ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
+			out_be32(&ug_regs->maccfg2, tempval);
+			out_be32(&uf_regs->upsmr, upsmr);
+
+			ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+			ugeth_activate(ugeth);
+		}
 	} else if (ugeth->oldlink) {
 			new_state = 1;
 			ugeth->oldlink = 0;
-- 
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html