[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <4B3A3EB9.9070008@majjas.com>
Date: Tue, 29 Dec 2009 12:39:05 -0500
From: Michael Breuer <mbreuer@...jas.com>
To: Stephen Hemminger <shemminger@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
"Berck E. Nash" <flyboy@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
netdev@...r.kernel.org
Subject: Re: sky2 panic in 2.6.32.1 under load (new oops)
Ok - I can also try with VT-D disabled for another data point.
On 12/29/2009 12:30 PM, Stephen Hemminger wrote:
> There could be DMA problems, either because chip isn't remembering
> upper address, or because of lack of wires from chip to memory controller;
> there have been problems on motherboards where I/O devices couldn't access
> all of memory.
>
> Try this, it forces each transmit to have full 64 bit address. It drops an
> optimization that was done to reduce the number of transmit descriptors
> used.
>
> --- a/drivers/net/sky2.c 2009-12-29 09:23:37.114074275 -0800
> +++ b/drivers/net/sky2.c 2009-12-29 09:26:38.699912035 -0800
> @@ -1038,10 +1038,11 @@ static void tx_init(struct sky2_port *sk
> sky2->tx_tcpsum = 0;
> sky2->tx_last_mss = 0;
>
> - le = get_tx_le(sky2,&sky2->tx_prod);
> - le->addr = 0;
> - le->opcode = OP_ADDR64 | HW_OWNER;
> - sky2->tx_last_upper = 0;
> + if (sizeof(dma_addr_t) == sizeof(u32)) {
> + le = get_tx_le(sky2,&sky2->tx_prod);
> + le->addr = 0;
> + le->opcode = OP_ADDR64 | HW_OWNER;
> + }
> }
>
> /* Update chip's next pointer */
> @@ -1669,10 +1670,9 @@ static netdev_tx_t sky2_xmit_frame(struc
>
> /* Send high bits if needed */
> upper = upper_32_bits(mapping);
> - if (upper != sky2->tx_last_upper) {
> + if (sizeof(mapping)> sizeof(u32)) {
> le = get_tx_le(sky2,&slot);
> le->addr = cpu_to_le32(upper);
> - sky2->tx_last_upper = upper;
> le->opcode = OP_ADDR64 | HW_OWNER;
> }
>
> @@ -1762,10 +1762,9 @@ static netdev_tx_t sky2_xmit_frame(struc
> goto mapping_unwind;
>
> upper = upper_32_bits(mapping);
> - if (upper != sky2->tx_last_upper) {
> + if (sizeof(mapping)> sizeof(u32)) {
> le = get_tx_le(sky2,&slot);
> le->addr = cpu_to_le32(upper);
> - sky2->tx_last_upper = upper;
> le->opcode = OP_ADDR64 | HW_OWNER;
> }
>
> --- a/drivers/net/sky2.h 2009-12-29 09:23:37.164072886 -0800
> +++ b/drivers/net/sky2.h 2009-12-29 09:25:15.302197993 -0800
> @@ -2191,7 +2191,6 @@ struct sky2_port {
>
> u16 tx_pending;
> u16 tx_last_mss;
> - u32 tx_last_upper;
> u32 tx_tcpsum;
>
> struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists