[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100107162113.GB7394@pengutronix.de>
Date: Thu, 7 Jan 2010 17:21:13 +0100
From: Wolfram Sang <w.sang@...gutronix.de>
To: Wolfgang Grandegger <wg@...ndegger.com>
Cc: Netdev@...r.kernel.org, Socketcan-core@...ts.berlios.de,
Linuxppc-dev@...ts.ozlabs.org, Devicetree-discuss@...ts.ozlabs.org,
Wolfgang Grandegger <wg@...x.de>
Subject: Re: [PATCH net-next v3 2/3] can: mscan-mpc5xxx: add support for
the MPC512x processor
On Thu, Jan 07, 2010 at 03:10:20PM +0100, Wolfgang Grandegger wrote:
> From: Wolfgang Grandegger <wg@...x.de>
>
> The main differences compared to the MSCAN on the MPC5200 are:
>
> - More flexibility in choosing the CAN source clock and frequency:
>
> Three different clock sources can be selected: "ip", "ref" or "sys".
> For the latter two, a clock divider can be defined as well. If the
> clock source is not specified by the device tree, we first try to
> find an optimal CAN source clock based on the system clock. If that
> is not possible, the reference clock will be used.
>
> - The behavior of bus-off recovery is configurable:
>
> To comply with the usual handling of Socket-CAN bus-off recovery,
> "recovery on request" is selected (instead of automatic recovery).
>
> Note that only MPC5121 Rev. 2 and later is supported.
>
> Signed-off-by: Wolfgang Grandegger <wg@...x.de>
Reviewed-by: Wolfram Sang <w.sang@...gutronix.de>
It still works with our board and I didn't find anything else to comment on.
Thanks, Wolfgang!
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Download attachment "signature.asc" of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists