netdev - RE: [PATCH] drivers/net/defxx.c: use %pMF to show MAC address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1262973254.14898.14.camel@Joe-Laptop.home>
Date:	Fri, 08 Jan 2010 09:54:14 -0800
From:	Joe Perches <joe@...ches.com>
To:	"Maciej W. Rozycki" <macro@...ux-mips.org>
Cc:	H Hartley Sweeten <hartleys@...ionengravers.com>,
	Linux Kernel <linux-kernel@...r.kernel.org>,
	netdev@...r.kernel.org, davem@...emloft.net
Subject: RE: [PATCH] drivers/net/defxx.c: use %pMF to show MAC address

On Fri, 2010-01-08 at 13:34 +0000, Maciej W. Rozycki wrote:
> On Thu, 7 Jan 2010, H Hartley Sweeten wrote:
> > >> I believe the output will _now_ be in the canonical form.
> > >> Before it wasn't bit reversed.  Now it should be.
> > >
> > > Output was correct -- why would you assume otherwise?
> > > With the two patches in place the output produced is now broken. :(

>  Here are excerpts from old bootstrap logs -- I don't have any of these 
> boards handy at the moment, but I'll have access to a couple in a few 
> weeks' time:
> 
> defxx: v1.10 2006/12/14  Lawrence V. Stefani and others
> tc0: DEFTA at addr = 0x10100000, IRQ = 2, Hardware addr = 08-00-2B-A3-66-C8
> tc0: registered as fddi0
> tc1: DEFTA at addr = 0x14100000, IRQ = 3, Hardware addr = 08-00-2B-A3-A3-29
> tc1: registered as fddi1
> 
> defxx: v1.10 2006/12/14  Lawrence V. Stefani and others
> 0000:00:06.0: DEFPA at addr = 0x41071000, IRQ = 57, Hardware addr = 00-60-B0-58-40-75
> 0000:00:06.0: registered as fddi0
> 0000:02:00.0: DEFPA at addr = 0x41510000, IRQ = 57, Hardware addr = 00-60-B0-58-41-E7
> 0000:02:00.0: registered as fddi1
> 
> Compare the addresses reported with the OUIs of the respective 
> manufacturers -- the former is DEC and the latter is HP.  See 
> http://standards.ieee.org/regauth/oui/oui.txt for a reference.

Then isn't the hardware address shown as ethernet and not as
in the FDDI canonical format?

Which confuses me relative to what you wrote earlier.

> On Mon, 2010-01-04 at 23:43 +0000, Maciej W. Rozycki wrote:
> > The example below shows an address, and the sequence of bits or symbols 
> > that would be transmitted when the address is used in the Source Address 
> > or Destination Address fields on the MAC header.  The transmission line 
> > shows the address bits in the order transmitted, from left to right.  For 
> > IEEE 802 LANs these correspond to actual bits on the medium.  The FDDI 
> > symbols line shows how the FDDI PHY sends the address bits as encoded 
> > symbols.
> > 
> >         MSB:            35:7B:12:00:00:01
> >         Canonical:      AC-DE-48-00-00-80

So, it should simply use %pM correct?

Is there any address that should be shown in the
FDDI canonical form?

cheers, Joe

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html