| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <14385191E87B904DBD836449AA30269D021A4A@MORGANITE.micrel.com>
Date: Fri, 15 Jan 2010 18:57:59 -0800
From: "Ha, Tristram" <Tristram.Ha@...rel.Com>
To: "Dave Miller" <davem@...emloft.net>
Cc: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 2.6.33 1/3] net: Micrel KSZ8841/2 PCI Ethernet driver
From: Tristram Ha <Tristram.Ha@...rel.com>
This is a new network driver for Micrel KSZ8841/KSZ8842 PCI Ethernet chips. The same driver can run both chips at the same time. It supports IPv4 TCP hardware checksumming and so can use scatter/gather transmission.
The KSZ8842 has a switch with lots of hardware configurations. The driver uses the proc system to allow users to configure the switch. If this is not desired the whole thing can be removed by not calling the init_proc() function.
The KSZ8842 switch has 2 ports. Some users like to take direct control of those ports. So KSZ8842 has a multiple devices mode in which the driver creates another network device so that users can specify which port to send packets. This mode is enabled by passing the "multi_dev=1" parameter to the driver during loading.
The KSZ884X can receive huge frames with size up to 1916 bytes. To use this feature change the network device MTU from 1500 to 1898.
The KSZ884X driver has 3 packet receive processing functions for the normal mode, multiple devices mode, and huge frame mode. Those functions are identical except for more checking for the new features. In normal programming point of view the huge frame version is the one to use because it covers all the cases, but this is done for performance consideration because the target clients for the KSZ884X chips are embedded systems, which unlike desktop PC may not have powerful CPU.
Signed-off-by: Tristram Ha <Tristram.Ha@...rel.com>
---
diff -uprN linux-2.6.33-rc3.old/drivers/net/ksz884x.c linux-2.6.33-rc3.new/drivers/net/ksz884x.c
--- linux-2.6.33-rc3.old/drivers/net/ksz884x.c 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.33-rc3.new/drivers/net/ksz884x.c 2010-01-15 14:48:19.000000000 -0800
@@ -0,0 +1,9527 @@
+/**
+ * drivers/net/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver
+ *
+ * Copyright (c) 2009-2010 Micrel, Inc.
+ * Tristram Ha <Tristram.Ha@...rel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/sched.h>
+
+/* Needed for STP support. */
+#ifdef CONFIG_KSZ8842_STP
+#include <../net/bridge/br_private.h>
+#endif
+
+
+/*
+ * PCI Configuration Space Registers
+ */
+
+/* Configuration ID Register */
+#define CFID 0x00
+/* vendor id, 2 bytes */
+#define CFID_DEVID 0xFFFF0000
+/* device id, 2 bytes */
+#define CFID_VENID 0x0000FFFF
+
+/* Command and Status Configuration Register */
+#define CFCS 0x04
+/* status register, 2 bytes */
+#define CFCS_STAT 0xFFFF0000
+/* command register, 2 bytes */
+#define CFCS_COMM 0x0000FFFF
+/* memory access enable */
+#define CFCS_COMM_MEM 0x00000002
+/* master enable */
+#define CFCS_COMM_MASTER 0x00000004
+/* parity error response */
+#define CFCS_COMM_PERRSP 0x00000040
+/* system error enable */
+#define CFCS_COMM_SYSERREN 0x00000100
+#define COMM_SETTING \
+ (CFCS_COMM_MEM | \
+ CFCS_COMM_MASTER | \
+ CFCS_COMM_PERRSP | \
+ CFCS_COMM_SYSERREN)
+
+/* Data Parity Error */
+#define CFCS_STAT_DPR 0x0100
+/* Device Select Timing */
+#define CFCS_STAT_DST 0x0600
+/* Received Target Abort */
+#define CFCS_STAT_RVTAB 0x1000
+/* Received Master Abort */
+#define CFCS_STAT_RVMAB 0x2000
+/* Signal System Error */
+#define CFCS_STAT_SYSERR 0x4000
+/* Detected Parity Error */
+#define CFCS_STAT_DPERR 0x8000
+
+/* Configuration Revision Register */
+#define CFRV 0x08
+/* basic code, 1 byte */
+#define CFRV_BASCLASS 0xFF000000
+/* sub-class code, 1 byte */
+#define CFRV_SUBCLASS 0x00FF0000
+/* revision id (Revision\Step number), 1 byte */
+#define CFRV_REVID 0x000000FF
+
+/* Configuration Latency Timer Register */
+#define CFLT 0x0C
+/* latency timer, 1 byte */
+#define CFLT_LATENCY_TIMER 0x0000FF00
+/* cache line size, 1 byte */
+#define CFLT_CACHE_LINESZ 0x000000FF
+/* default latency timer - 0 */
+#define LATENCY_TIMER 0x00000080
+/* default cache line size - 8 (8-DWORD) */
+#define CACHE_LINESZ 8
+
+/* Configuration Memory Base Address Register */
+#define CMBA 0x10
+
+/* Subsystem ID Register */
+#define CSID 0x2C
+/* Subsystem ID, 2 bytes */
+#define CSID_SUBSYSID 0xFFFF0000
+/* Subsystem Vendor ID, 2 bytes*/
+#define CSID_SUBVENID 0x0000FFFF
+
+/* Configuration Interrupt Register */
+#define CFIT 0x3C
+/* maximum latency, 1 byte */
+#define CFIT_MAX_L 0xFF000000
+/* minimum grant, 1 byte */
+#define CFIT_MIN_G 0x00FF0000
+/* interrupt pin, 1 byte */
+#define CFIT_IPIN 0x0000FF00
+/* interrupt line, 1 byte */
+#define CFIT_ILINE 0x000000FF
+/* default maximum latency - 0x28 */
+#define MAX_LATENCY 0x28
+/* default minimum grant - 0x14 */
+#define MIN_GRANT 0x14
+
+/* Power Management Control and Status Register */
+#define CPMC 0x54
+#define POWER_STATE_D0 0x0000
+#define POWER_STATE_D1 0x0001
+#define POWER_STATE_D2 0x0002
+#define POWER_STATE_D3 0x0003
+#define POWER_STATE_MASK 0x0003
+#define POWER_PME_ENABLE 0x0100
+#define POWER_PME_STATUS 0x8000
+
+/* DMA Registers */
+
+#define KS_DMA_TX_CTRL 0x0000
+#define DMA_TX_ENABLE 0x00000001
+#define DMA_TX_CRC_ENABLE 0x00000002
+#define DMA_TX_PAD_ENABLE 0x00000004
+#define DMA_TX_LOOPBACK 0x00000100
+#define DMA_TX_FLOW_ENABLE 0x00000200
+#define DMA_TX_CSUM_IP 0x00010000
+#define DMA_TX_CSUM_TCP 0x00020000
+#define DMA_TX_CSUM_UDP 0x00040000
+#define DMA_TX_BURST_SIZE 0x3F000000
+
+#define KS_DMA_RX_CTRL 0x0004
+#define DMA_RX_ENABLE 0x00000001
+#define KS884X_DMA_RX_MULTICAST 0x00000002
+#define DMA_RX_PROMISCUOUS 0x00000004
+#define DMA_RX_ERROR 0x00000008
+#define DMA_RX_UNICAST 0x00000010
+#define DMA_RX_ALL_MULTICAST 0x00000020
+#define DMA_RX_BROADCAST 0x00000040
+#define DMA_RX_FLOW_ENABLE 0x00000200
+#define DMA_RX_CSUM_IP 0x00010000
+#define DMA_RX_CSUM_TCP 0x00020000
+#define DMA_RX_CSUM_UDP 0x00040000
+#define DMA_RX_BURST_SIZE 0x3F000000
+
+#define DMA_BURST_SHIFT 24
+#define DMA_BURST_DEFAULT 8
+
+#define KS_DMA_TX_START 0x0008
+#define KS_DMA_RX_START 0x000C
+#define DMA_START 0x00000001
+
+#define KS_DMA_TX_ADDR 0x0010
+#define KS_DMA_RX_ADDR 0x0014
+
+#define DMA_ADDR_LIST_MASK 0xFFFFFFFC
+#define DMA_ADDR_LIST_SHIFT 2
+
+/* MTR0 */
+#define KS884X_MULTICAST_0_OFFSET 0x0020
+#define KS884X_MULTICAST_1_OFFSET 0x0021
+#define KS884X_MULTICAST_2_OFFSET 0x0022
+#define KS884x_MULTICAST_3_OFFSET 0x0023
+/* MTR1 */
+#define KS884X_MULTICAST_4_OFFSET 0x0024
+#define KS884X_MULTICAST_5_OFFSET 0x0025
+#define KS884X_MULTICAST_6_OFFSET 0x0026
+#define KS884X_MULTICAST_7_OFFSET 0x0027
+
+/* Interrupt Registers */
+
+/* INTEN */
+#define KS884X_INTERRUPTS_ENABLE 0x0028
+/* INTST */
+#define KS884X_INTERRUPTS_STATUS 0x002C
+
+#define KS884X_INT_RX_STOPPED 0x02000000
+#define KS884X_INT_TX_STOPPED 0x04000000
+#define KS884X_INT_RX_OVERRUN 0x08000000
+#define KS884X_INT_TX_EMPTY 0x10000000
+#define KS884X_INT_RX 0x20000000
+#define KS884X_INT_TX 0x40000000
+#define KS884X_INT_PHY 0x80000000
+
+#define KS884X_INT_RX_MASK \
+ (KS884X_INT_RX | KS884X_INT_RX_OVERRUN)
+#define KS884X_INT_TX_MASK \
+ (KS884X_INT_TX | KS884X_INT_TX_EMPTY)
+#define KS884X_INT_MASK (KS884X_INT_RX | KS884X_INT_TX | KS884X_INT_PHY)
+
+/* MAC Additional Station Address */
+
+/* MAAL0 */
+#define KS_ADD_ADDR_0_LO 0x0080
+/* MAAH0 */
+#define KS_ADD_ADDR_0_HI 0x0084
+/* MAAL1 */
+#define KS_ADD_ADDR_1_LO 0x0088
+/* MAAH1 */
+#define KS_ADD_ADDR_1_HI 0x008C
+/* MAAL2 */
+#define KS_ADD_ADDR_2_LO 0x0090
+/* MAAH2 */
+#define KS_ADD_ADDR_2_HI 0x0094
+/* MAAL3 */
+#define KS_ADD_ADDR_3_LO 0x0098
+/* MAAH3 */
+#define KS_ADD_ADDR_3_HI 0x009C
+/* MAAL4 */
+#define KS_ADD_ADDR_4_LO 0x00A0
+/* MAAH4 */
+#define KS_ADD_ADDR_4_HI 0x00A4
+/* MAAL5 */
+#define KS_ADD_ADDR_5_LO 0x00A8
+/* MAAH5 */
+#define KS_ADD_ADDR_5_HI 0x00AC
+/* MAAL6 */
+#define KS_ADD_ADDR_6_LO 0x00B0
+/* MAAH6 */
+#define KS_ADD_ADDR_6_HI 0x00B4
+/* MAAL7 */
+#define KS_ADD_ADDR_7_LO 0x00B8
+/* MAAH7 */
+#define KS_ADD_ADDR_7_HI 0x00BC
+/* MAAL8 */
+#define KS_ADD_ADDR_8_LO 0x00C0
+/* MAAH8 */
+#define KS_ADD_ADDR_8_HI 0x00C4
+/* MAAL9 */
+#define KS_ADD_ADDR_9_LO 0x00C8
+/* MAAH9 */
+#define KS_ADD_ADDR_9_HI 0x00CC
+/* MAAL10 */
+#define KS_ADD_ADDR_A_LO 0x00D0
+/* MAAH10 */
+#define KS_ADD_ADDR_A_HI 0x00D4
+/* MAAL11 */
+#define KS_ADD_ADDR_B_LO 0x00D8
+/* MAAH11 */
+#define KS_ADD_ADDR_B_HI 0x00DC
+/* MAAL12 */
+#define KS_ADD_ADDR_C_LO 0x00E0
+/* MAAH12 */
+#define KS_ADD_ADDR_C_HI 0x00E4
+/* MAAL13 */
+#define KS_ADD_ADDR_D_LO 0x00E8
+/* MAAH13 */
+#define KS_ADD_ADDR_D_HI 0x00EC
+/* MAAL14 */
+#define KS_ADD_ADDR_E_LO 0x00F0
+/* MAAH14 */
+#define KS_ADD_ADDR_E_HI 0x00F4
+/* MAAL15 */
+#define KS_ADD_ADDR_F_LO 0x00F8
+/* MAAH15 */
+#define KS_ADD_ADDR_F_HI 0x00FC
+
+#define ADD_ADDR_HI_MASK 0x0000FFFF
+#define ADD_ADDR_ENABLE 0x80000000
+#define ADD_ADDR_INCR 8
+
+/* Miscellaneous Registers */
+
+/* MARL */
+#define KS884X_ADDR_0_OFFSET 0x0200
+#define KS884X_ADDR_1_OFFSET 0x0201
+/* MARM */
+#define KS884X_ADDR_2_OFFSET 0x0202
+#define KS884X_ADDR_3_OFFSET 0x0203
+/* MARH */
+#define KS884X_ADDR_4_OFFSET 0x0204
+#define KS884X_ADDR_5_OFFSET 0x0205
+
+/* OBCR */
+#define KS884X_BUS_CTRL_OFFSET 0x0210
+
+#define BUS_SPEED_125_MHZ 0x0000
+#define BUS_SPEED_62_5_MHZ 0x0001
+#define BUS_SPEED_41_66_MHZ 0x0002
+#define BUS_SPEED_25_MHZ 0x0003
+
+/* EEPCR */
+#define KS884X_EEPROM_CTRL_OFFSET 0x0212
+
+#define EEPROM_CHIP_SELECT 0x0001
+#define EEPROM_SERIAL_CLOCK 0x0002
+#define EEPROM_DATA_OUT 0x0004
+#define EEPROM_DATA_IN 0x0008
+#define EEPROM_ACCESS_ENABLE 0x0010
+
+/* MBIR */
+#define KS884X_MEM_INFO_OFFSET 0x0214
+
+#define RX_MEM_TEST_FAILED 0x0008
+#define RX_MEM_TEST_FINISHED 0x0010
+#define TX_MEM_TEST_FAILED 0x0800
+#define TX_MEM_TEST_FINISHED 0x1000
+
+/* GCR */
+#define KS884X_GLOBAL_CTRL_OFFSET 0x0216
+#define GLOBAL_SOFTWARE_RESET 0x0001
+
+#define KS8841_POWER_MANAGE_OFFSET 0x0218
+
+/* WFCR */
+#define KS8841_WOL_CTRL_OFFSET 0x021A
+#define KS8841_WOL_MAGIC_ENABLE 0x0080
+#define KS8841_WOL_FRAME3_ENABLE 0x0008
+#define KS8841_WOL_FRAME2_ENABLE 0x0004
+#define KS8841_WOL_FRAME1_ENABLE 0x0002
+#define KS8841_WOL_FRAME0_ENABLE 0x0001
+
+/* WF0 */
+#define KS8841_WOL_FRAME_CRC_OFFSET 0x0220
+#define KS8841_WOL_FRAME_BYTE0_OFFSET 0x0224
+#define KS8841_WOL_FRAME_BYTE2_OFFSET 0x0228
+
+/* IACR */
+#define KS884X_IACR_P 0x04A0
+#define KS884X_IACR_OFFSET KS884X_IACR_P
+
+/* IADR1 */
+#define KS884X_IADR1_P 0x04A2
+#define KS884X_IADR2_P 0x04A4
+#define KS884X_IADR3_P 0x04A6
+#define KS884X_IADR4_P 0x04A8
+#define KS884X_IADR5_P 0x04AA
+
+#define KS884X_ACC_CTRL_SEL_OFFSET KS884X_IACR_P
+#define KS884X_ACC_CTRL_INDEX_OFFSET (KS884X_ACC_CTRL_SEL_OFFSET + 1)
+
+#define KS884X_ACC_DATA_0_OFFSET KS884X_IADR4_P
+#define KS884X_ACC_DATA_1_OFFSET (KS884X_ACC_DATA_0_OFFSET + 1)
+#define KS884X_ACC_DATA_2_OFFSET KS884X_IADR5_P
+#define KS884X_ACC_DATA_3_OFFSET (KS884X_ACC_DATA_2_OFFSET + 1)
+#define KS884X_ACC_DATA_4_OFFSET KS884X_IADR2_P
+#define KS884X_ACC_DATA_5_OFFSET (KS884X_ACC_DATA_4_OFFSET + 1)
+#define KS884X_ACC_DATA_6_OFFSET KS884X_IADR3_P
+#define KS884X_ACC_DATA_7_OFFSET (KS884X_ACC_DATA_6_OFFSET + 1)
+#define KS884X_ACC_DATA_8_OFFSET KS884X_IADR1_P
+
+/* P1MBCR */
+#define KS884X_P1MBCR_P 0x04D0
+#define KS884X_P1MBSR_P 0x04D2
+#define KS884X_PHY1ILR_P 0x04D4
+#define KS884X_PHY1IHR_P 0x04D6
+#define KS884X_P1ANAR_P 0x04D8
+#define KS884X_P1ANLPR_P 0x04DA
+
+/* P2MBCR */
+#define KS884X_P2MBCR_P 0x04E0
+#define KS884X_P2MBSR_P 0x04E2
+#define KS884X_PHY2ILR_P 0x04E4
+#define KS884X_PHY2IHR_P 0x04E6
+#define KS884X_P2ANAR_P 0x04E8
+#define KS884X_P2ANLPR_P 0x04EA
+
+#define KS884X_PHY_1_CTRL_OFFSET KS884X_P1MBCR_P
+#define PHY_CTRL_INTERVAL (KS884X_P2MBCR_P - KS884X_P1MBCR_P)
+
+#define KS884X_PHY_CTRL_OFFSET 0x00
+
+/* Mode Control Register */
+#define PHY_REG_CTRL 0
+
+#define PHY_RESET 0x8000
+#define PHY_LOOPBACK 0x4000
+#define PHY_SPEED_100MBIT 0x2000
+#define PHY_AUTO_NEG_ENABLE 0x1000
+#define PHY_POWER_DOWN 0x0800
+#define PHY_MII_DISABLE 0x0400
+#define PHY_AUTO_NEG_RESTART 0x0200
+#define PHY_FULL_DUPLEX 0x0100
+#define PHY_COLLISION_TEST 0x0080
+#define PHY_HP_MDIX 0x0020
+#define PHY_FORCE_MDIX 0x0010
+#define PHY_AUTO_MDIX_DISABLE 0x0008
+#define PHY_REMOTE_FAULT_DISABLE 0x0004
+#define PHY_TRANSMIT_DISABLE 0x0002
+#define PHY_LED_DISABLE 0x0001
+
+#define KS884X_PHY_STATUS_OFFSET 0x02
+
+/* Mode Status Register */
+#define PHY_REG_STATUS 1
+
+#define PHY_100BT4_CAPABLE 0x8000
+#define PHY_100BTX_FD_CAPABLE 0x4000
+#define PHY_100BTX_CAPABLE 0x2000
+#define PHY_10BT_FD_CAPABLE 0x1000
+#define PHY_10BT_CAPABLE 0x0800
+#define PHY_MII_SUPPRESS_CAPABLE 0x0040
+#define PHY_AUTO_NEG_ACKNOWLEDGE 0x0020
+#define PHY_REMOTE_FAULT 0x0010
+#define PHY_AUTO_NEG_CAPABLE 0x0008
+#define PHY_LINK_STATUS 0x0004
+#define PHY_JABBER_DETECT 0x0002
+#define PHY_EXTENDED_CAPABILITY 0x0001
+
+#define KS884X_PHY_ID_1_OFFSET 0x04
+#define KS884X_PHY_ID_2_OFFSET 0x06
+
+/* PHY Identifier Registers */
+#define PHY_REG_ID_1 2
+#define PHY_REG_ID_2 3
+
+#define KS884X_PHY_AUTO_NEG_OFFSET 0x08
+
+/* Auto-Negotiation Advertisement Register */
+#define PHY_REG_AUTO_NEGOTIATION 4
+
+#define PHY_AUTO_NEG_NEXT_PAGE 0x8000
+#define PHY_AUTO_NEG_REMOTE_FAULT 0x2000
+/* Not supported. */
+#define PHY_AUTO_NEG_ASYM_PAUSE 0x0800
+#define PHY_AUTO_NEG_SYM_PAUSE 0x0400
+#define PHY_AUTO_NEG_100BT4 0x0200
+#define PHY_AUTO_NEG_100BTX_FD 0x0100
+#define PHY_AUTO_NEG_100BTX 0x0080
+#define PHY_AUTO_NEG_10BT_FD 0x0040
+#define PHY_AUTO_NEG_10BT 0x0020
+#define PHY_AUTO_NEG_SELECTOR 0x001F
+#define PHY_AUTO_NEG_802_3 0x0001
+
+#define PHY_AUTO_NEG_PAUSE (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE)
+
+#define KS884X_PHY_REMOTE_CAP_OFFSET 0x0A
+
+/* Auto-Negotiation Link Partner Ability Register */
+#define PHY_REG_REMOTE_CAPABILITY 5
+
+#define PHY_REMOTE_NEXT_PAGE 0x8000
+#define PHY_REMOTE_ACKNOWLEDGE 0x4000
+#define PHY_REMOTE_REMOTE_FAULT 0x2000
+#define PHY_REMOTE_SYM_PAUSE 0x0400
+#define PHY_REMOTE_100BTX_FD 0x0100
+#define PHY_REMOTE_100BTX 0x0080
+#define PHY_REMOTE_10BT_FD 0x0040
+#define PHY_REMOTE_10BT 0x0020
+
+/* P1VCT */
+#define KS884X_P1VCT_P 0x04F0
+#define KS884X_P1PHYCTRL_P 0x04F2
+
+/* P2VCT */
+#define KS884X_P2VCT_P 0x04F4
+#define KS884X_P2PHYCTRL_P 0x04F6
+
+#define KS884X_PHY_SPECIAL_OFFSET KS884X_P1VCT_P
+#define PHY_SPECIAL_INTERVAL (KS884X_P2VCT_P - KS884X_P1VCT_P)
+
+#define KS884X_PHY_LINK_MD_OFFSET 0x00
+
+#define PHY_START_CABLE_DIAG 0x8000
+#define PHY_CABLE_DIAG_RESULT 0x6000
+#define PHY_CABLE_STAT_NORMAL 0x0000
+#define PHY_CABLE_STAT_OPEN 0x2000
+#define PHY_CABLE_STAT_SHORT 0x4000
+#define PHY_CABLE_STAT_FAILED 0x6000
+#define PHY_CABLE_10M_SHORT 0x1000
+#define PHY_CABLE_FAULT_COUNTER 0x01FF
+
+#define KS884X_PHY_PHY_CTRL_OFFSET 0x02
+
+#define PHY_STAT_REVERSED_POLARITY 0x0020
+#define PHY_STAT_MDIX 0x0010
+#define PHY_FORCE_LINK 0x0008
+#define PHY_POWER_SAVING_DISABLE 0x0004
+#define PHY_REMOTE_LOOPBACK 0x0002
+
+/* SIDER */
+#define KS884X_SIDER_P 0x0400
+#define KS884X_CHIP_ID_OFFSET KS884X_SIDER_P
+#define KS884X_FAMILY_ID_OFFSET (KS884X_CHIP_ID_OFFSET + 1)
+
+#define REG_FAMILY_ID 0x88
+
+#define REG_CHIP_ID_41 0x8810
+#define REG_CHIP_ID_42 0x8800
+
+#define KS884X_CHIP_ID_MASK_41 0xFF10
+#define KS884X_CHIP_ID_MASK 0xFFF0
+#define KS884X_CHIP_ID_SHIFT 4
+#define KS884X_REVISION_MASK 0x000E
+#define KS884X_REVISION_SHIFT 1
+#define KS8842_START 0x0001
+
+#define CHIP_IP_41_M 0x8810
+#define CHIP_IP_42_M 0x8800
+#define CHIP_IP_61_M 0x8890
+#define CHIP_IP_62_M 0x8880
+
+#define CHIP_IP_41_P 0x8850
+#define CHIP_IP_42_P 0x8840
+#define CHIP_IP_61_P 0x88D0
+#define CHIP_IP_62_P 0x88C0
+
+/* SGCR1 */
+#define KS8842_SGCR1_P 0x0402
+#define KS8842_SWITCH_CTRL_1_OFFSET KS8842_SGCR1_P
+
+#define SWITCH_PASS_ALL 0x8000
+#define SWITCH_TX_FLOW_CTRL 0x2000
+#define SWITCH_RX_FLOW_CTRL 0x1000
+#define SWITCH_CHECK_LENGTH 0x0800
+#define SWITCH_AGING_ENABLE 0x0400
+#define SWITCH_FAST_AGING 0x0200
+#define SWITCH_AGGR_BACKOFF 0x0100
+#define SWITCH_PASS_PAUSE 0x0008
+#define SWITCH_LINK_AUTO_AGING 0x0001
+
+/* SGCR2 */
+#define KS8842_SGCR2_P 0x0404
+#define KS8842_SWITCH_CTRL_2_OFFSET KS8842_SGCR2_P
+
+#define SWITCH_VLAN_ENABLE 0x8000
+#define SWITCH_IGMP_SNOOP 0x4000
+#define IPV6_MLD_SNOOP_ENABLE 0x2000
+#define IPV6_MLD_SNOOP_OPTION 0x1000
+#define PRIORITY_SCHEME_SELECT 0x0800
+#define SWITCH_MIRROR_RX_TX 0x0100
+#define UNICAST_VLAN_BOUNDARY 0x0080
+#define MULTICAST_STORM_DISABLE 0x0040
+#define SWITCH_BACK_PRESSURE 0x0020
+#define FAIR_FLOW_CTRL 0x0010
+#define NO_EXC_COLLISION_DROP 0x0008
+#define SWITCH_HUGE_PACKET 0x0004
+#define SWITCH_LEGAL_PACKET 0x0002
+#define SWITCH_BUF_RESERVE 0x0001
+
+/* SGCR3 */
+#define KS8842_SGCR3_P 0x0406
+#define KS8842_SWITCH_CTRL_3_OFFSET KS8842_SGCR3_P
+
+#define BROADCAST_STORM_RATE_LO 0xFF00
+#define SWITCH_REPEATER 0x0080
+#define SWITCH_HALF_DUPLEX 0x0040
+#define SWITCH_FLOW_CTRL 0x0020
+#define SWITCH_10_MBIT 0x0010
+#define SWITCH_REPLACE_NULL_VID 0x0008
+#define BROADCAST_STORM_RATE_HI 0x0007
+
+#define BROADCAST_STORM_RATE 0x07FF
+
+/* SGCR4 */
+#define KS8842_SGCR4_P 0x0408
+
+/* SGCR5 */
+#define KS8842_SGCR5_P 0x040A
+#define KS8842_SWITCH_CTRL_5_OFFSET KS8842_SGCR5_P
+
+#define LED_MODE 0x8200
+#define LED_SPEED_DUPLEX_ACT 0x0000
+#define LED_SPEED_DUPLEX_LINK_ACT 0x8000
+#define LED_DUPLEX_10_100 0x0200
+
+/* SGCR6 */
+#define KS8842_SGCR6_P 0x0410
+#define KS8842_SWITCH_CTRL_6_OFFSET KS8842_SGCR6_P
+
+#define KS8842_PRIORITY_MASK 3
+#define KS8842_PRIORITY_SHIFT 2
+
+/* SGCR7 */
+#define KS8842_SGCR7_P 0x0412
+#define KS8842_SWITCH_CTRL_7_OFFSET KS8842_SGCR7_P
+
+#define SWITCH_UNK_DEF_PORT_ENABLE 0x0008
+#define SWITCH_UNK_DEF_PORT_3 0x0004
+#define SWITCH_UNK_DEF_PORT_2 0x0002
+#define SWITCH_UNK_DEF_PORT_1 0x0001
+
+/* MACAR1 */
+#define KS8842_MACAR1_P 0x0470
+#define KS8842_MACAR2_P 0x0472
+#define KS8842_MACAR3_P 0x0474
+#define KS8842_MAC_ADDR_1_OFFSET KS8842_MACAR1_P
+#define KS8842_MAC_ADDR_0_OFFSET (KS8842_MAC_ADDR_1_OFFSET + 1)
+#define KS8842_MAC_ADDR_3_OFFSET KS8842_MACAR2_P
+#define KS8842_MAC_ADDR_2_OFFSET (KS8842_MAC_ADDR_3_OFFSET + 1)
+#define KS8842_MAC_ADDR_5_OFFSET KS8842_MACAR3_P
+#define KS8842_MAC_ADDR_4_OFFSET (KS8842_MAC_ADDR_5_OFFSET + 1)
+
+/* TOSR1 */
+#define KS8842_TOSR1_P 0x0480
+#define KS8842_TOSR2_P 0x0482
+#define KS8842_TOSR3_P 0x0484
+#define KS8842_TOSR4_P 0x0486
+#define KS8842_TOSR5_P 0x0488
+#define KS8842_TOSR6_P 0x048A
+#define KS8842_TOSR7_P 0x0490
+#define KS8842_TOSR8_P 0x0492
+#define KS8842_TOS_1_OFFSET KS8842_TOSR1_P
+#define KS8842_TOS_2_OFFSET KS8842_TOSR2_P
+#define KS8842_TOS_3_OFFSET KS8842_TOSR3_P
+#define KS8842_TOS_4_OFFSET KS8842_TOSR4_P
+#define KS8842_TOS_5_OFFSET KS8842_TOSR5_P
+#define KS8842_TOS_6_OFFSET KS8842_TOSR6_P
+
+#define KS8842_TOS_7_OFFSET KS8842_TOSR7_P
+#define KS8842_TOS_8_OFFSET KS8842_TOSR8_P
+
+/* P1CR1 */
+#define KS8842_P1CR1_P 0x0500
+#define KS8842_P1CR2_P 0x0502
+#define KS8842_P1VIDR_P 0x0504
+#define KS8842_P1CR3_P 0x0506
+#define KS8842_P1IRCR_P 0x0508
+#define KS8842_P1ERCR_P 0x050A
+#define KS884X_P1SCSLMD_P 0x0510
+#define KS884X_P1CR4_P 0x0512
+#define KS884X_P1SR_P 0x0514
+
+/* P2CR1 */
+#define KS8842_P2CR1_P 0x0520
+#define KS8842_P2CR2_P 0x0522
+#define KS8842_P2VIDR_P 0x0524
+#define KS8842_P2CR3_P 0x0526
+#define KS8842_P2IRCR_P 0x0528
+#define KS8842_P2ERCR_P 0x052A
+#define KS884X_P2SCSLMD_P 0x0530
+#define KS884X_P2CR4_P 0x0532
+#define KS884X_P2SR_P 0x0534
+
+/* P3CR1 */
+#define KS8842_P3CR1_P 0x0540
+#define KS8842_P3CR2_P 0x0542
+#define KS8842_P3VIDR_P 0x0544
+#define KS8842_P3CR3_P 0x0546
+#define KS8842_P3IRCR_P 0x0548
+#define KS8842_P3ERCR_P 0x054A
+
+#define KS8842_PORT_1_CTRL_1 KS8842_P1CR1_P
+#define KS8842_PORT_2_CTRL_1 KS8842_P2CR1_P
+#define KS8842_PORT_3_CTRL_1 KS8842_P3CR1_P
+
+#define PORT_CTRL_ADDR(port, addr) \
+ (addr = KS8842_PORT_1_CTRL_1 + port * \
+ (KS8842_PORT_2_CTRL_1 - KS8842_PORT_1_CTRL_1))
+
+#define KS8842_PORT_CTRL_1_OFFSET 0x00
+
+#define PORT_BROADCAST_STORM 0x0080
+#define PORT_DIFFSERV_ENABLE 0x0040
+#define PORT_802_1P_ENABLE 0x0020
+#define PORT_BASED_PRIORITY_MASK 0x0018
+#define PORT_BASED_PRIORITY_BASE 0x0003
+#define PORT_BASED_PRIORITY_SHIFT 3
+#define PORT_BASED_PRIORITY_0 0x0000
+#define PORT_BASED_PRIORITY_1 0x0008
+#define PORT_BASED_PRIORITY_2 0x0010
+#define PORT_BASED_PRIORITY_3 0x0018
+#define PORT_INSERT_TAG 0x0004
+#define PORT_REMOVE_TAG 0x0002
+#define PORT_PRIO_QUEUE_ENABLE 0x0001
+
+#define KS8842_PORT_CTRL_2_OFFSET 0x02
+
+#define PORT_INGRESS_VLAN_FILTER 0x4000
+#define PORT_DISCARD_NON_VID 0x2000
+#define PORT_FORCE_FLOW_CTRL 0x1000
+#define PORT_BACK_PRESSURE 0x0800
+#define PORT_TX_ENABLE 0x0400
+#define PORT_RX_ENABLE 0x0200
+#define PORT_LEARN_DISABLE 0x0100
+#define PORT_MIRROR_SNIFFER 0x0080
+#define PORT_MIRROR_RX 0x0040
+#define PORT_MIRROR_TX 0x0020
+#define PORT_USER_PRIORITY_CEILING 0x0008
+#define PORT_VLAN_MEMBERSHIP 0x0007
+
+#define KS8842_PORT_CTRL_VID_OFFSET 0x04
+
+#define PORT_DEFAULT_VID 0x0001
+
+#define KS8842_PORT_CTRL_3_OFFSET 0x06
+
+#define PORT_INGRESS_LIMIT_MODE 0x000C
+#define PORT_INGRESS_ALL 0x0000
+#define PORT_INGRESS_UNICAST 0x0004
+#define PORT_INGRESS_MULTICAST 0x0008
+#define PORT_INGRESS_BROADCAST 0x000C
+#define PORT_COUNT_IFG 0x0002
+#define PORT_COUNT_PREAMBLE 0x0001
+
+#define KS8842_PORT_IN_RATE_OFFSET 0x08
+#define KS8842_PORT_OUT_RATE_OFFSET 0x0A
+
+#define PORT_PRIORITY_RATE 0x0F
+#define PORT_PRIORITY_RATE_SHIFT 4
+
+#define KS884X_PORT_LINK_MD 0x10
+
+#define PORT_CABLE_10M_SHORT 0x8000
+#define PORT_CABLE_DIAG_RESULT 0x6000
+#define PORT_CABLE_STAT_NORMAL 0x0000
+#define PORT_CABLE_STAT_OPEN 0x2000
+#define PORT_CABLE_STAT_SHORT 0x4000
+#define PORT_CABLE_STAT_FAILED 0x6000
+#define PORT_START_CABLE_DIAG 0x1000
+#define PORT_FORCE_LINK 0x0800
+#define PORT_POWER_SAVING_DISABLE 0x0400
+#define PORT_PHY_REMOTE_LOOPBACK 0x0200
+#define PORT_CABLE_FAULT_COUNTER 0x01FF
+
+#define KS884X_PORT_CTRL_4_OFFSET 0x12
+
+#define PORT_LED_OFF 0x8000
+#define PORT_TX_DISABLE 0x4000
+#define PORT_AUTO_NEG_RESTART 0x2000
+#define PORT_REMOTE_FAULT_DISABLE 0x1000
+#define PORT_POWER_DOWN 0x0800
+#define PORT_AUTO_MDIX_DISABLE 0x0400
+#define PORT_FORCE_MDIX 0x0200
+#define PORT_LOOPBACK 0x0100
+#define PORT_AUTO_NEG_ENABLE 0x0080
+#define PORT_FORCE_100_MBIT 0x0040
+#define PORT_FORCE_FULL_DUPLEX 0x0020
+#define PORT_AUTO_NEG_SYM_PAUSE 0x0010
+#define PORT_AUTO_NEG_100BTX_FD 0x0008
+#define PORT_AUTO_NEG_100BTX 0x0004
+#define PORT_AUTO_NEG_10BT_FD 0x0002
+#define PORT_AUTO_NEG_10BT 0x0001
+
+#define KS884X_PORT_STATUS_OFFSET 0x14
+
+#define PORT_HP_MDIX 0x8000
+#define PORT_REVERSED_POLARITY 0x2000
+#define PORT_RX_FLOW_CTRL 0x0800
+#define PORT_TX_FLOW_CTRL 0x1000
+#define PORT_STATUS_SPEED_100MBIT 0x0400
+#define PORT_STATUS_FULL_DUPLEX 0x0200
+#define PORT_REMOTE_FAULT 0x0100
+#define PORT_MDIX_STATUS 0x0080
+#define PORT_AUTO_NEG_COMPLETE 0x0040
+#define PORT_STATUS_LINK_GOOD 0x0020
+#define PORT_REMOTE_SYM_PAUSE 0x0010
+#define PORT_REMOTE_100BTX_FD 0x0008
+#define PORT_REMOTE_100BTX 0x0004
+#define PORT_REMOTE_10BT_FD 0x0002
+#define PORT_REMOTE_10BT 0x0001
+
+/*
+#define STATIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+#define STATIC_MAC_TABLE_FWD_PORTS 00-00070000-00000000
+#define STATIC_MAC_TABLE_VALID 00-00080000-00000000
+#define STATIC_MAC_TABLE_OVERRIDE 00-00100000-00000000
+#define STATIC_MAC_TABLE_USE_FID 00-00200000-00000000
+#define STATIC_MAC_TABLE_FID 00-03C00000-00000000
+*/
+
+#define STATIC_MAC_TABLE_ADDR 0x0000FFFF
+#define STATIC_MAC_TABLE_FWD_PORTS 0x00070000
+#define STATIC_MAC_TABLE_VALID 0x00080000
+#define STATIC_MAC_TABLE_OVERRIDE 0x00100000
+#define STATIC_MAC_TABLE_USE_FID 0x00200000
+#define STATIC_MAC_TABLE_FID 0x03C00000
+
+#define STATIC_MAC_FWD_PORTS_SHIFT 16
+#define STATIC_MAC_FID_SHIFT 22
+
+/*
+#define VLAN_TABLE_VID 00-00000000-00000FFF
+#define VLAN_TABLE_FID 00-00000000-0000F000
+#define VLAN_TABLE_MEMBERSHIP 00-00000000-00070000
+#define VLAN_TABLE_VALID 00-00000000-00080000
+*/
+
+#define VLAN_TABLE_VID 0x00000FFF
+#define VLAN_TABLE_FID 0x0000F000
+#define VLAN_TABLE_MEMBERSHIP 0x00070000
+#define VLAN_TABLE_VALID 0x00080000
+
+#define VLAN_TABLE_FID_SHIFT 12
+#define VLAN_TABLE_MEMBERSHIP_SHIFT 16
+
+/*
+#define DYNAMIC_MAC_TABLE_ADDR 00-0000FFFF-FFFFFFFF
+#define DYNAMIC_MAC_TABLE_FID 00-000F0000-00000000
+#define DYNAMIC_MAC_TABLE_SRC_PORT 00-00300000-00000000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP 00-00C00000-00000000
+#define DYNAMIC_MAC_TABLE_ENTRIES 03-FF000000-00000000
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY 04-00000000-00000000
+#define DYNAMIC_MAC_TABLE_RESERVED 78-00000000-00000000
+#define DYNAMIC_MAC_TABLE_NOT_READY 80-00000000-00000000
+*/
+
+#define DYNAMIC_MAC_TABLE_ADDR 0x0000FFFF
+#define DYNAMIC_MAC_TABLE_FID 0x000F0000
+#define DYNAMIC_MAC_TABLE_SRC_PORT 0x00300000
+#define DYNAMIC_MAC_TABLE_TIMESTAMP 0x00C00000
+#define DYNAMIC_MAC_TABLE_ENTRIES 0xFF000000
+
+#define DYNAMIC_MAC_TABLE_ENTRIES_H 0x03
+#define DYNAMIC_MAC_TABLE_MAC_EMPTY 0x04
+#define DYNAMIC_MAC_TABLE_RESERVED 0x78
+#define DYNAMIC_MAC_TABLE_NOT_READY 0x80
+
+#define DYNAMIC_MAC_FID_SHIFT 16
+#define DYNAMIC_MAC_SRC_PORT_SHIFT 20
+#define DYNAMIC_MAC_TIMESTAMP_SHIFT 22
+#define DYNAMIC_MAC_ENTRIES_SHIFT 24
+#define DYNAMIC_MAC_ENTRIES_H_SHIFT 8
+
+/*
+#define MIB_COUNTER_VALUE 00-00000000-3FFFFFFF
+#define MIB_COUNTER_VALID 00-00000000-40000000
+#define MIB_COUNTER_OVERFLOW 00-00000000-80000000
+*/
+
+#define MIB_COUNTER_VALUE 0x3FFFFFFF
+#define MIB_COUNTER_VALID 0x40000000
+#define MIB_COUNTER_OVERFLOW 0x80000000
+
+#define MIB_PACKET_DROPPED 0x0000FFFF
+
+#define KS_MIB_PACKET_DROPPED_TX_0 0x100
+#define KS_MIB_PACKET_DROPPED_TX_1 0x101
+#define KS_MIB_PACKET_DROPPED_TX 0x102
+#define KS_MIB_PACKET_DROPPED_RX_0 0x103
+#define KS_MIB_PACKET_DROPPED_RX_1 0x104
+#define KS_MIB_PACKET_DROPPED_RX 0x105
+
+/*
+ * Hardware register access macros
+ */
+
+#define hw_dis_intr_sync(hw) hw_dis_intr(hw)
+
+#define HW_R8(hw, addr, data) (*(data) = readb((hw)->ioaddr + (addr)))
+#define HW_W8(hw, addr, data) writeb((data), (hw)->ioaddr + (addr))
+
+#define HW_R16(hw, addr, data) (*(data) = readw((hw)->ioaddr + (addr)))
+#define HW_W16(hw, addr, data) writew((data), (hw)->ioaddr + (addr))
+
+#define HW_R32(hw, addr, data) (*(data) = readl((hw)->ioaddr + (addr)))
+#define HW_W32(hw, addr, data) writel((data), (hw)->ioaddr + (addr))
+
+#define HW_PCI_READ_BYTE(hw, addr, data) \
+ pci_read_config_byte((struct pci_dev *) (hw)->pdev, addr, data)
+
+#define HW_PCI_READ_WORD(hw, addr, data) \
+ pci_read_config_word((struct pci_dev *) (hw)->pdev, addr, data)
+
+#define HW_PCI_READ_DWORD(hw, addr, data) \
+ pci_read_config_dword((struct pci_dev *) (hw)->pdev, addr, data)
+
+#define HW_PCI_WRITE_BYTE(hw, addr, data) \
+ pci_write_config_byte((struct pci_dev *) (hw)->pdev, addr, data)
+
+#define HW_PCI_WRITE_WORD(hw, addr, data) \
+ pci_write_config_word((struct pci_dev *) (hw)->pdev, addr, data)
+
+#define HW_PCI_WRITE_DWORD(hw, addr, data) \
+ pci_write_config_dword((struct pci_dev *) (hw)->pdev, addr, data)
+
+
+/* Change default LED mode. */
+#define SET_DEFAULT_LED LED_SPEED_DUPLEX_ACT
+
+#define MAC_ADDR_LEN 6
+#define MAC_ADDR_ORDER(i) (MAC_ADDR_LEN - 1 - (i))
+
+#define MAX_ETHERNET_BODY_SIZE 1500
+#define ETHERNET_HEADER_SIZE 14
+
+#define MAX_ETHERNET_PACKET_SIZE \
+ (MAX_ETHERNET_BODY_SIZE + ETHERNET_HEADER_SIZE)
+
+#define REGULAR_RX_BUF_SIZE (MAX_ETHERNET_PACKET_SIZE + 4)
+#define MAX_RX_BUF_SIZE (1912 + 4)
+
+#define ADDITIONAL_ENTRIES 16
+#define MAX_MULTICAST_LIST 32
+
+#define HW_MULTICAST_SIZE 8
+
+#define HW_TO_DEV_PORT(port) (port - 1)
+
+enum {
+ media_connected,
+ media_disconnected
+};
+
+enum {
+ OID_COUNTER_UNKOWN,
+
+ OID_COUNTER_FIRST,
+
+ /* total transmit errors */
+ OID_COUNTER_XMIT_ERROR,
+
+ /* total receive errors */
+ OID_COUNTER_RCV_ERROR,
+
+ OID_COUNTER_LAST
+};
+
+/*
+ * Hardware descriptor definitions
+ */
+
+#define DESC_ALIGNMENT 16
+#define BUFFER_ALIGNMENT 8
+
+#define NUM_OF_RX_DESC 64
+#define NUM_OF_TX_DESC 64
+
+#define KS_DESC_RX_FRAME_LEN 0x000007FF
+#define KS_DESC_RX_FRAME_TYPE 0x00008000
+#define KS_DESC_RX_ERROR_CRC 0x00010000
+#define KS_DESC_RX_ERROR_RUNT 0x00020000
+#define KS_DESC_RX_ERROR_TOO_LONG 0x00040000
+#define KS_DESC_RX_ERROR_PHY 0x00080000
+#define KS884X_DESC_RX_PORT_MASK 0x00300000
+#define KS_DESC_RX_MULTICAST 0x01000000
+#define KS_DESC_RX_ERROR 0x02000000
+#define KS_DESC_RX_ERROR_CSUM_UDP 0x04000000
+#define KS_DESC_RX_ERROR_CSUM_TCP 0x08000000
+#define KS_DESC_RX_ERROR_CSUM_IP 0x10000000
+#define KS_DESC_RX_LAST 0x20000000
+#define KS_DESC_RX_FIRST 0x40000000
+#define KS_DESC_RX_ERROR_COND \
+ (KS_DESC_RX_ERROR_CRC | \
+ KS_DESC_RX_ERROR_RUNT | \
+ KS_DESC_RX_ERROR_PHY | \
+ KS_DESC_RX_ERROR_TOO_LONG)
+
+#define KS_DESC_HW_OWNED 0x80000000
+
+#define KS_DESC_BUF_SIZE 0x000007FF
+#define KS884X_DESC_TX_PORT_MASK 0x00300000
+#define KS_DESC_END_OF_RING 0x02000000
+#define KS_DESC_TX_CSUM_GEN_UDP 0x04000000
+#define KS_DESC_TX_CSUM_GEN_TCP 0x08000000
+#define KS_DESC_TX_CSUM_GEN_IP 0x10000000
+#define KS_DESC_TX_LAST 0x20000000
+#define KS_DESC_TX_FIRST 0x40000000
+#define KS_DESC_TX_INTERRUPT 0x80000000
+
+#define KS_DESC_PORT_SHIFT 20
+
+#define KS_DESC_RX_MASK (KS_DESC_BUF_SIZE)
+
+#define KS_DESC_TX_MASK \
+ (KS_DESC_TX_INTERRUPT | \
+ KS_DESC_TX_FIRST | \
+ KS_DESC_TX_LAST | \
+ KS_DESC_TX_CSUM_GEN_IP | \
+ KS_DESC_TX_CSUM_GEN_TCP | \
+ KS_DESC_TX_CSUM_GEN_UDP | \
+ KS_DESC_BUF_SIZE)
+
+struct ksz_desc_rx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 hw_owned:1;
+ u32 first_desc:1;
+ u32 last_desc:1;
+ u32 csum_err_ip:1;
+ u32 csum_err_tcp:1;
+ u32 csum_err_udp:1;
+ u32 error:1;
+ u32 multicast:1;
+ u32 src_port:4;
+ u32 err_phy:1;
+ u32 err_too_long:1;
+ u32 err_runt:1;
+ u32 err_crc:1;
+ u32 frame_type:1;
+ u32 reserved1:4;
+ u32 frame_len:11;
+#else
+ u32 frame_len:11;
+ u32 reserved1:4;
+ u32 frame_type:1;
+ u32 err_crc:1;
+ u32 err_runt:1;
+ u32 err_too_long:1;
+ u32 err_phy:1;
+ u32 src_port:4;
+ u32 multicast:1;
+ u32 error:1;
+ u32 csum_err_udp:1;
+ u32 csum_err_tcp:1;
+ u32 csum_err_ip:1;
+ u32 last_desc:1;
+ u32 first_desc:1;
+ u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_tx_stat {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 hw_owned:1;
+ u32 reserved1:31;
+#else
+ u32 reserved1:31;
+ u32 hw_owned:1;
+#endif
+};
+
+struct ksz_desc_rx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 reserved4:6;
+ u32 end_of_ring:1;
+ u32 reserved3:14;
+ u32 buf_size:11;
+#else
+ u32 buf_size:11;
+ u32 reserved3:14;
+ u32 end_of_ring:1;
+ u32 reserved4:6;
+#endif
+};
+
+struct ksz_desc_tx_buf {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 intr:1;
+ u32 first_seg:1;
+ u32 last_seg:1;
+ u32 csum_gen_ip:1;
+ u32 csum_gen_tcp:1;
+ u32 csum_gen_udp:1;
+ u32 end_of_ring:1;
+ u32 reserved4:1;
+ u32 dest_port:4;
+ u32 reserved3:9;
+ u32 buf_size:11;
+#else
+ u32 buf_size:11;
+ u32 reserved3:9;
+ u32 dest_port:4;
+ u32 reserved4:1;
+ u32 end_of_ring:1;
+ u32 csum_gen_udp:1;
+ u32 csum_gen_tcp:1;
+ u32 csum_gen_ip:1;
+ u32 last_seg:1;
+ u32 first_seg:1;
+ u32 intr:1;
+#endif
+};
+
+union desc_stat {
+ struct ksz_desc_rx_stat rx;
+ struct ksz_desc_tx_stat tx;
+ u32 data;
+};
+
+union desc_buf {
+ struct ksz_desc_rx_buf rx;
+ struct ksz_desc_tx_buf tx;
+ u32 data;
+};
+
+/**
+ * struct ksz_hw_desc - Hardware descriptor data structure
+ * @ctrl: Descriptor control value.
+ * @buf: Descriptor buffer value.
+ * @addr: Physical address of memory buffer.
+ * @next: Pointer to next hardware descriptor.
+ */
+struct ksz_hw_desc {
+ union desc_stat ctrl;
+ union desc_buf buf;
+ u32 addr;
+ u32 next;
+};
+
+/**
+ * struct ksz_sw_desc - Software descriptor data structure
+ * @ctrl: Descriptor control value.
+ * @buf: Descriptor buffer value.
+ * @buf_size: Current buffers size value in hardware descriptor.
+ */
+struct ksz_sw_desc {
+ union desc_stat ctrl;
+ union desc_buf buf;
+ u32 buf_size;
+};
+
+/**
+ * struct ksz_dma_buf - OS dependent DMA buffer data structure
+ * @skb: Associated socket buffer.
+ * @dma: Associated physical DMA address.
+ * len: Actual len used.
+ */
+struct ksz_dma_buf {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ int len;
+};
+
+/**
+ * struct ksz_desc - Descriptor structure
+ * @phw: Hardware descriptor pointer to uncached physical memory.
+ * @sw: Cached memory to hold hardware descriptor values for
+ * manipulation.
+ * @dma_buf: Operating system dependent data structure to hold physical
+ * memory buffer allocation information.
+ */
+struct ksz_desc {
+ struct ksz_hw_desc *phw;
+ struct ksz_sw_desc sw;
+ struct ksz_dma_buf dma_buf;
+};
+
+#define DMA_BUFFER(desc) ((struct ksz_dma_buf *)(&(desc)->dma_buf))
+
+/**
+ * struct ksz_desc_info - Descriptor information data structure
+ * @ring: First descriptor in the ring.
+ * @cur: Current descriptor being manipulated.
+ * @ring_virt: First hardware descriptor in the ring.
+ * @ring_phys: The physical address of the first descriptor of the ring.
+ * @size: Size of hardware descriptor.
+ * @alloc: Number of descriptors allocated.
+ * @avail: Number of descriptors available for use.
+ * @last: Index for last descriptor released to hardware.
+ * @next: Index for next descriptor available for use.
+ * @mask: Mask for index wrapping.
+ */
+struct ksz_desc_info {
+ struct ksz_desc *ring;
+ struct ksz_desc *cur;
+ struct ksz_hw_desc *ring_virt;
+ u32 ring_phys;
+ int size;
+ int alloc;
+ int avail;
+ int last;
+ int next;
+ int mask;
+};
+
+/*
+ * KSZ8842 switch definitions
+ */
+
+enum {
+ TABLE_STATIC_MAC = 0,
+ TABLE_VLAN,
+ TABLE_DYNAMIC_MAC,
+ TABLE_MIB
+};
+
+#define LEARNED_MAC_TABLE_ENTRIES 1024
+#define STATIC_MAC_TABLE_ENTRIES 8
+
+/**
+ * struct ksz_mac_table - Static MAC table data structure
+ * @mac_addr: MAC address to filter.
+ * @vid: VID value.
+ * @fid: FID value.
+ * @ports: Port membership.
+ * @override: Override setting.
+ * @use_fid: FID use setting.
+ * @valid: Valid setting indicating the entry is being used.
+ */
+struct ksz_mac_table {
+ u8 mac_addr[MAC_ADDR_LEN];
+ u16 vid;
+ u8 fid;
+ u8 ports;
+ u8 override:1;
+ u8 use_fid:1;
+ u8 valid:1;
+};
+
+#define VLAN_TABLE_ENTRIES 16
+
+/**
+ * struct ksz_vlan_table - VLAN table data structure
+ * @vid: VID value.
+ * @fid: FID value.
+ * @member: Port membership.
+ */
+struct ksz_vlan_table {
+ u16 vid;
+ u8 fid;
+ u8 member;
+};
+
+#define DIFFSERV_ENTRIES 64
+#define PRIO_802_1P_ENTRIES 8
+#define PRIO_QUEUES 4
+
+#define SWITCH_PORT_NUM 2
+#define TOTAL_PORT_NUM (SWITCH_PORT_NUM + 1)
+#define HOST_MASK (1 << SWITCH_PORT_NUM)
+#define PORT_MASK 7
+
+#define MAIN_PORT 0
+#define OTHER_PORT 1
+#define HOST_PORT SWITCH_PORT_NUM
+
+#define PORT_COUNTER_NUM 0x20
+#define TOTAL_PORT_COUNTER_NUM (PORT_COUNTER_NUM + 2)
+
+#define MIB_COUNTER_RX_LO_PRIORITY 0x00
+#define MIB_COUNTER_RX_HI_PRIORITY 0x01
+#define MIB_COUNTER_RX_UNDERSIZE 0x02
+#define MIB_COUNTER_RX_FRAGMENT 0x03
+#define MIB_COUNTER_RX_OVERSIZE 0x04
+#define MIB_COUNTER_RX_JABBER 0x05
+#define MIB_COUNTER_RX_SYMBOL_ERR 0x06
+#define MIB_COUNTER_RX_CRC_ERR 0x07
+#define MIB_COUNTER_RX_ALIGNMENT_ERR 0x08
+#define MIB_COUNTER_RX_CTRL_8808 0x09
+#define MIB_COUNTER_RX_PAUSE 0x0A
+#define MIB_COUNTER_RX_BROADCAST 0x0B
+#define MIB_COUNTER_RX_MULTICAST 0x0C
+#define MIB_COUNTER_RX_UNICAST 0x0D
+#define MIB_COUNTER_RX_OCTET_64 0x0E
+#define MIB_COUNTER_RX_OCTET_65_127 0x0F
+#define MIB_COUNTER_RX_OCTET_128_255 0x10
+#define MIB_COUNTER_RX_OCTET_256_511 0x11
+#define MIB_COUNTER_RX_OCTET_512_1023 0x12
+#define MIB_COUNTER_RX_OCTET_1024_1522 0x13
+#define MIB_COUNTER_TX_LO_PRIORITY 0x14
+#define MIB_COUNTER_TX_HI_PRIORITY 0x15
+#define MIB_COUNTER_TX_LATE_COLLISION 0x16
+#define MIB_COUNTER_TX_PAUSE 0x17
+#define MIB_COUNTER_TX_BROADCAST 0x18
+#define MIB_COUNTER_TX_MULTICAST 0x19
+#define MIB_COUNTER_TX_UNICAST 0x1A
+#define MIB_COUNTER_TX_DEFERRED 0x1B
+#define MIB_COUNTER_TX_TOTAL_COLLISION 0x1C
+#define MIB_COUNTER_TX_EXCESS_COLLISION 0x1D
+#define MIB_COUNTER_TX_SINGLE_COLLISION 0x1E
+#define MIB_COUNTER_TX_MULTI_COLLISION 0x1F
+
+#define MIB_COUNTER_RX_DROPPED_PACKET 0x20
+#define MIB_COUNTER_TX_DROPPED_PACKET 0x21
+
+/**
+ * struct ksz_port_mib - Port MIB data structure
+ * @cnt_ptr: Current pointer to MIB counter index.
+ * @link_down: Indication the link has just gone down.
+ * @state: Connection status of the port.
+ * @mib_start: The starting counter index. Some ports do not start at 0.
+ * @counter: 64-bit MIB counter value.
+ * @dropped: Temporary buffer to remember last read packet dropped values.
+ *
+ * MIB counters needs to be read periodically so that counters do not get
+ * overflowed and give incorrect values. A right balance is needed to
+ * satisfy this condition and not waste too much CPU time.
+ *
+ * It is pointless to read MIB counters when the port is disconnected. The
+ * @state provides the connection status so that MIB counters are read only
+ * when the port is connected. The @link_down indicates the port is just
+ * disconnected so that all MIB counters are read one last time to update the
+ * information.
+ */
+struct ksz_port_mib {
+ u8 cnt_ptr;
+ u8 link_down;
+ u8 state;
+ u8 mib_start;
+
+ u64 counter[TOTAL_PORT_COUNTER_NUM];
+ u32 dropped[2];
+};
+
+/**
+ * struct ksz_port_cfg - Port configuration data structure
+ * @vid: VID value.
+ * @member: Port membership.
+ * @port_prio: Port priority.
+ * @rx_rate: Receive priority rate.
+ * @tx_rate: Transmit priority rate.
+ * @stp_state: Current Spanning Tree Protocol state.
+ */
+struct ksz_port_cfg {
+ u16 vid;
+ u8 member;
+ u8 port_prio;
+ u32 rx_rate[PRIO_QUEUES];
+ u32 tx_rate[PRIO_QUEUES];
+ int stp_state;
+};
+
+/**
+ * struct ksz_switch - KSZ8842 switch data structure
+ * @mac_table: MAC table entries information.
+ * @vlan_table: VLAN table entries information.
+ * @port_cfg: Port configuration information.
+ * @diffserv: DiffServ priority settings. Possible values from 6-bit of ToS
+ * (bit7 ~ bit2) field.
+ * @p_802_1p: 802.1P priority settings. Possible values from 3-bit of 802.1p
+ * Tag priority field.
+ * @br_addr: Bridge address. Used for STP.
+ * @other_addr: Other MAC address. Used for multiple network device mode.
+ * @broad_per: Broadcast storm percentage.
+ * @member: Current port membership. Used for STP.
+ */
+struct ksz_switch {
+ struct ksz_mac_table mac_table[STATIC_MAC_TABLE_ENTRIES];
+ struct ksz_vlan_table vlan_table[VLAN_TABLE_ENTRIES];
+ struct ksz_port_cfg port_cfg[TOTAL_PORT_NUM];
+
+ u8 diffserv[DIFFSERV_ENTRIES];
+ u8 p_802_1p[PRIO_802_1P_ENTRIES];
+
+ u8 br_addr[MAC_ADDR_LEN];
+ u8 other_addr[MAC_ADDR_LEN];
+
+ u8 broad_per;
+ u8 member;
+};
+
+#define TX_RATE_UNIT 10000
+
+/**
+ * struct ksz_port_info - Port information data structure
+ * @state: Connection status of the port.
+ * @tx_rate: Transmit rate divided by 10000 to get Mbit.
+ * @duplex: Duplex mode.
+ * @advertised: Advertised auto-negotiation setting. Used to determine link.
+ * @partner: Auto-negotiation partner setting. Used to determine link.
+ * @port_id: Port index to access actual hardware register.
+ * @pdev: Pointer to OS dependent network device.
+ */
+struct ksz_port_info {
+ uint state;
+ uint tx_rate;
+ u8 duplex;
+ u8 advertised;
+ u8 partner;
+ u8 port_id;
+ void *pdev;
+};
+
+#define MAX_TX_HELD_SIZE 52000
+
+/* Hardware features and bug fixes. */
+#define LINK_INT_WORKING (1 << 0)
+#define SMALL_PACKET_TX_BUG (1 << 1)
+#define HALF_DUPLEX_SIGNAL_BUG (1 << 2)
+#define IPV6_CSUM_GEN_BUG (1 << 3)
+#define RX_HUGE_FRAME (1 << 4)
+#define STP_SUPPORT (1 << 8)
+
+/* Software overrides. */
+#define PAUSE_FLOW_CTRL (1 << 0)
+#define FAST_AGING (1 << 1)
+
+/**
+ * struct ksz_hw - KSZ884X hardware data structure
+ * @ioaddr: Virtual address assigned.
+ * @ksz_switch: Pointer to KSZ8842 switch.
+ * @port_info: Port information.
+ * @port_mib: Port MIB information.
+ * @dev_count: Number of network devices this hardware supports.
+ * @dst_ports: Destination ports in switch for transmission.
+ * @id: Hardware ID. Used for display only.
+ * @mib_cnt: Number of MIB counters this hardware has.
+ * @mib_port_cnt: Number of ports with MIB counters.
+ * @tx_cfg: Cached transmit control settings.
+ * @rx_cfg: Cached receive control settings.
+ * @intr_mask: Current interrupt mask.
+ * @intr_set: Current interrup set.
+ * @intr_blocked: Interrupt blocked.
+ * @rx_desc_info: Receive descriptor information.
+ * @tx_desc_info: Transmit descriptor information.
+ * @tx_int_cnt: Transmit interrupt count. Used for TX optimization.
+ * @tx_int_mask: Transmit interrupt mask. Used for TX optimization.
+ * @tx_size: Transmit data size. Used for TX optimization.
+ * The maximum is defined by MAX_TX_HELD_SIZE.
+ * @pdev: Pointer to PCI device.
+ * @perm_addr: Permanent MAC address.
+ * @override_addr: Overrided MAC address.
+ * @address: Additional MAC address entries.
+ * @addr_list_size: Additional MAC address list size.
+ * @mac_override: Indication of MAC address overrided.
+ * @promiscuous: Counter to keep track of promiscuous mode set.
+ * @all_multi: Counter to keep track of all multicast mode set.
+ * @multi_list: Multicast address entries.
+ * @multi_bits: Cached multicast hash table settings.
+ * @multi_list_size: Multicast address list size.
+ * @enabled: Indication of hardware enabled.
+ * @rx_stop: Indication of receive process stop.
+ * @features: Hardware features to enable.
+ * @overrides: Hardware features to override.
+ * @parent: Pointer to parent, network device private structure.
+ */
+struct ksz_hw {
+ void __iomem *ioaddr;
+
+ struct ksz_switch *ksz_switch;
+ struct ksz_port_info port_info[SWITCH_PORT_NUM];
+ struct ksz_port_mib port_mib[TOTAL_PORT_NUM];
+ int dev_count;
+ int dst_ports;
+ int id;
+ int mib_cnt;
+ int mib_port_cnt;
+
+ u32 tx_cfg;
+ u32 rx_cfg;
+ u32 intr_mask;
+ u32 intr_set;
+ uint intr_blocked;
+
+ struct ksz_desc_info rx_desc_info;
+ struct ksz_desc_info tx_desc_info;
+
+ int tx_int_cnt;
+ int tx_int_mask;
+ int tx_size;
+
+ void *pdev;
+
+ u8 perm_addr[MAC_ADDR_LEN];
+ u8 override_addr[MAC_ADDR_LEN];
+ u8 address[ADDITIONAL_ENTRIES][MAC_ADDR_LEN];
+ u8 addr_list_size;
+ u8 mac_override;
+ u8 promiscuous;
+ u8 all_multi;
+ u8 multi_list[MAX_MULTICAST_LIST][MAC_ADDR_LEN];
+ u8 multi_bits[HW_MULTICAST_SIZE];
+ u8 multi_list_size;
+
+ u8 enabled;
+ u8 rx_stop;
+ u8 reserved2[1];
+
+ uint features;
+ uint overrides;
+
+ void *parent;
+};
+
+enum {
+ PHY_NO_FLOW_CTRL,
+ PHY_FLOW_CTRL,
+ PHY_TX_ONLY,
+ PHY_RX_ONLY
+};
+
+/**
+ * struct ksz_port - Virtual port data structure
+ * @duplex: Duplex mode setting. 1 for half duplex, 2 for full
+ * duplex, and 0 for auto, which normally results in full
+ * duplex.
+ * @speed: Speed setting. 10 for 10 Mbit, 100 for 100 Mbit, and
+ * 0 for auto, which normally results in 100 Mbit.
+ * @force_link: Force link setting. 0 for auto-negotiation, and 1 for
+ * force.
+ * @flow_ctrl: Flow control setting. PHY_NO_FLOW_CTRL for no flow
+ * control, and PHY_FLOW_CTRL for flow control.
+ * PHY_TX_ONLY and PHY_RX_ONLY are not supported for 100
+ * Mbit PHY.
+ * @first_port: Index of first port this port supports.
+ * @mib_port_cnt: Number of ports with MIB counters.
+ * @port_cnt: Number of ports this port supports.
+ * @counter: Port statistics counter.
+ * @hw: Pointer to hardware structure.
+ * @linked: Pointer to port information linked to this port.
+ */
+struct ksz_port {
+ u8 duplex;
+ u8 speed;
+ u8 force_link;
+ u8 flow_ctrl;
+
+ int first_port;
+ int mib_port_cnt;
+ int port_cnt;
+ u64 counter[OID_COUNTER_LAST];
+
+ struct ksz_hw *hw;
+ struct ksz_port_info *linked;
+};
+
+/**
+ * struct ksz_timer_info - Timer information data structure
+ * @timer: Kernel timer.
+ * @cnt: Running timer counter.
+ * @max: Number of times to run timer; -1 for infinity.
+ * @period: Timer period in jiffies.
+ */
+struct ksz_timer_info {
+ struct timer_list timer;
+ int cnt;
+ int max;
+ int period;
+};
+
+/**
+ * struct ksz_shared_mem - OS dependent shared memory data structure
+ * @dma_addr: Physical DMA address allocated.
+ * @alloc_size: Allocation size.
+ * @phys: Actual physical address used.
+ * @alloc_virt: Virtual address allocated.
+ * @virt: Actual virtual address used.
+ */
+struct ksz_shared_mem {
+ dma_addr_t dma_addr;
+ uint alloc_size;
+ uint phys;
+ u8 *alloc_virt;
+ u8 *virt;
+};
+
+/**
+ * struct ksz_counter_info - OS dependent counter information data structure
+ * @counter: Wait queue to wakeup after counters are read.
+ * @time: Next time in jiffies to read counter.
+ * @read: Indication of counters read in full or not.
+ */
+struct ksz_counter_info {
+ wait_queue_head_t counter;
+ unsigned long time;
+ int read;
+};
+
+enum {
+ /* Read-only entries. */
+ PROC_INFO,
+
+ PROC_DYNAMIC,
+ PROC_STATIC,
+
+ /* Read-write entries. */
+ PROC_SET_DUPLEX,
+ PROC_SET_SPEED,
+ PROC_SET_FORCE,
+ PROC_SET_FLOW_CTRL,
+ PROC_SET_MIB,
+
+ PROC_SET_PME,
+
+ PROC_SET_BROADCAST_STORM,
+ PROC_SET_DIFFSERV,
+ PROC_SET_802_1P,
+
+ PROC_ENABLE_VLAN,
+ PROC_SET_REPLACE_NULL_VID,
+
+ PROC_MAIN_LAST,
+
+ /* Port specific read-only entries. */
+ PROC_GET_PORT_DUPLEX,
+ PROC_GET_PORT_SPEED,
+ PROC_GET_PORT_MIB,
+
+ PROC_GET_CABLE_STATUS,
+ PROC_GET_LINK_STATUS,
+
+ /* Port specific read-write entries. */
+ PROC_SET_DEF_VID,
+
+ PROC_SET_CAPABILITIES,
+
+ PROC_ENABLE_BROADCAST_STORM,
+ PROC_ENABLE_DIFFSERV,
+ PROC_ENABLE_802_1P,
+ PROC_ENABLE_PRIO_QUEUE,
+
+ PROC_SET_PORT_BASED,
+
+ PROC_SET_DIS_NON_VID,
+ PROC_SET_INGRESS,
+ PROC_SET_INSERT_TAG,
+ PROC_SET_REMOVE_TAG,
+ PROC_SET_REPLACE_VID,
+
+ PROC_ENABLE_PRIO_RATE,
+ PROC_SET_RX_P0_RATE,
+ PROC_SET_RX_P1_RATE,
+ PROC_SET_RX_P2_RATE,
+ PROC_SET_RX_P3_RATE,
+ PROC_SET_TX_P0_RATE,
+ PROC_SET_TX_P1_RATE,
+ PROC_SET_TX_P2_RATE,
+ PROC_SET_TX_P3_RATE,
+
+ PROC_LAST
+};
+
+enum {
+ FOR_ALL,
+ FOR_WAN,
+ FOR_OUT,
+ FOR_LAN = TOTAL_PORT_NUM
+};
+
+/**
+ * struct ksz_proc_def - Proc definition data structure
+ * @port_cnt: Setting to indicate whether this proc setting is available.
+ * @port_num: The defined proc index.
+ * @proct_name: The defined proc name.
+ */
+struct ksz_proc_def {
+ int port_cnt;
+ int proc_num;
+ char *proc_name;
+};
+
+/* struct ksz_proc_info - Proc information data structure
+ * @priv: Pointer to network device private data.
+ * @info: Pointer to defined proc definition.
+ * @port: The port index.
+ */
+struct ksz_proc_info {
+ void *priv;
+ struct ksz_proc_def *info;
+ int port;
+};
+
+/**
+ * struct dev_info - Network device information data structure
+ * @dev: Pointer to network device.
+ * @pdev: Pointer to PCI device.
+ * @hw: Hardware structure.
+ * @desc_pool: Physical memory used for descriptor pool.
+ * @hwlock: Spinlock to prevent hardware from accessing.
+ * @lock: Mutex lock to prevent device from accessing.
+ * @dev_rcv: Receive process function used.
+ * @last_skb: Socket buffer allocated for descriptor rx fragments.
+ * @skb_index: Buffer index for receiving fragments.
+ * @skb_len: Buffer length for receiving fragments.
+ * @mib_read: Workqueue to read MIB counters.
+ * @mib_timer_info: Timer to read MIB counters.
+ * @counter: Used for MIB reading.
+ * @mtu: Current MTU used. The default is REGULAR_RX_BUF_SIZE;
+ * the maximum is MAX_RX_BUF_SIZE.
+ * @opened: Counter to keep track of device open.
+ * @rx_tasklet: Receive processing tasklet.
+ * @tx_tasklet: Transmit processing tasklet.
+ * @wol_enable: Wake-on-LAN enable set by ethtool.
+ * @wol_support: Wake-on-LAN support used by ethtool.
+ * @pme_wait: Used for KSZ8841 power management.
+ */
+struct dev_info {
+ struct net_device *dev;
+ struct pci_dev *pdev;
+
+ struct ksz_hw hw;
+ struct ksz_shared_mem desc_pool;
+
+ spinlock_t hwlock;
+ struct mutex lock;
+
+ int (*dev_rcv)(struct dev_info *);
+
+ struct sk_buff *last_skb;
+ int skb_index;
+ int skb_len;
+
+ struct work_struct mib_read;
+ struct ksz_timer_info mib_timer_info;
+ struct ksz_counter_info counter[TOTAL_PORT_NUM];
+
+ int mtu;
+ int opened;
+
+ struct tasklet_struct rx_tasklet;
+ struct tasklet_struct tx_tasklet;
+
+ int wol_enable;
+ int wol_support;
+ unsigned long pme_wait;
+};
+
+/**
+ * struct dev_priv - Network device private data structure
+ * @adapter: Adapter device information.
+ * @port: Port information.
+ * @monitor_time_info: Timer to monitor ports.
+ * @stats: Network statistics.
+ * @proc_info: Proc information.
+ * @proc_main: Main proc entry.
+ * @proc_port_info: Proc information for each port.
+ * @proc_port: Port proc entry.
+ * @proc_sem: Semaphore for proc accessing.
+ * @id: Device ID.
+ * @mii_if: MII interface information.
+ * @advertising: Temporary variable to store advertised settings.
+ * @msg_enable: The message flags controlling driver output.
+ * @media_state: The connection status of the device.
+ * @multicast: The all multicast state of the device.
+ * @promiscuous: The promiscuous state of the device.
+ */
+struct dev_priv {
+ struct dev_info *adapter;
+ struct ksz_port port;
+ struct ksz_timer_info monitor_timer_info;
+ struct net_device_stats stats;
+
+ struct ksz_proc_info proc_info[PROC_MAIN_LAST];
+ struct proc_dir_entry *proc_main;
+ struct ksz_proc_info proc_port_info[TOTAL_PORT_NUM]
+ [PROC_LAST - PROC_MAIN_LAST - 1];
+ struct proc_dir_entry *proc_port[TOTAL_PORT_NUM];
+ struct semaphore proc_sem;
+ int id;
+
+ struct mii_if_info mii_if;
+ u32 advertising;
+
+ u32 msg_enable;
+ int media_state;
+ int multicast;
+ int promiscuous;
+};
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define DRV_NAME "KSZ884X PCI"
+#define DEVICE_NAME "KSZ884x PCI"
+#define DRV_VERSION "1.0.0"
+#define DRV_RELDATE "Jan 15, 2010"
+
+static char version[] __devinitdata =
+ "Micrel " DEVICE_NAME " " DRV_VERSION " (" DRV_RELDATE ")";
+
+static u8 DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x88, 0x42, 0x01 };
+
+/*
+ * Interrupt processing primary routines
+ */
+
+static inline void hw_ack_intr(struct ksz_hw *hw, uint interrupt)
+{
+ HW_W32(hw, KS884X_INTERRUPTS_STATUS, interrupt);
+}
+
+static inline void hw_dis_intr(struct ksz_hw *hw)
+{
+ hw->intr_blocked = hw->intr_mask;
+ HW_W32(hw, KS884X_INTERRUPTS_ENABLE, 0);
+ HW_R32(hw, KS884X_INTERRUPTS_ENABLE, &hw->intr_set);
+}
+
+static inline void hw_set_intr(struct ksz_hw *hw, uint interrupt)
+{
+ hw->intr_set = interrupt;
+ HW_W32(hw, KS884X_INTERRUPTS_ENABLE, interrupt);
+}
+
+static inline void hw_ena_intr(struct ksz_hw *hw)
+{
+ hw->intr_blocked = 0;
+ hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_dis_intr_bit(struct ksz_hw *hw, uint bit)
+{
+ hw->intr_mask &= ~(bit);
+}
+
+static inline void hw_turn_off_intr(struct ksz_hw *hw, uint interrupt)
+{
+ u32 read_intr;
+
+ HW_R32(hw, KS884X_INTERRUPTS_ENABLE, &read_intr);
+ hw->intr_set = read_intr & ~interrupt;
+ HW_W32(hw, KS884X_INTERRUPTS_ENABLE, hw->intr_set);
+ hw_dis_intr_bit(hw, interrupt);
+}
+
+/**
+ * hw_turn_on_intr - turn on specified interrupts
+ * @hw: The hardware instance.
+ * @bit: The interrupt bits to be on.
+ *
+ * This routine turns on the specified interrupts in the interrupt mask so that
+ * those interrupts will be enabled.
+ */
+static void hw_turn_on_intr(struct ksz_hw *hw, u32 bit)
+{
+ hw->intr_mask |= bit;
+
+ if (!hw->intr_blocked)
+ hw_set_intr(hw, hw->intr_mask);
+}
+
+static inline void hw_ena_intr_bit(struct ksz_hw *hw, uint interrupt)
+{
+ u32 read_intr;
+
+ HW_R32(hw, KS884X_INTERRUPTS_ENABLE, &read_intr);
+ hw->intr_set = read_intr | interrupt;
+ HW_W32(hw, KS884X_INTERRUPTS_ENABLE, hw->intr_set);
+}
+
+static inline void hw_read_intr(struct ksz_hw *hw, uint *status)
+{
+ HW_R32(hw, KS884X_INTERRUPTS_STATUS, status);
+ *status = *status & hw->intr_set;
+}
+
+static inline void hw_restore_intr(struct ksz_hw *hw, uint interrupt)
+{
+ if (interrupt)
+ hw_ena_intr(hw);
+}
+
+/**
+ * hw_block_intr - block hardware interrupts
+ *
+ * This function blocks all interrupts of the hardware and returns the current
+ * interrupt enable mask so that interrupts can be restored later.
+ *
+ * Return the current interrupt enable mask.
+ */
+static uint hw_block_intr(struct ksz_hw *hw)
+{
+ uint interrupt = 0;
+
+ if (!hw->intr_blocked) {
+ hw_dis_intr_sync(hw);
+ interrupt = hw->intr_blocked;
+ }
+ return interrupt;
+}
+
+/*
+ * Hardware descriptor routines
+ */
+
+static inline void reset_desc(struct ksz_desc *desc, union desc_stat status)
+{
+ status.rx.hw_owned = 0;
+ desc->phw->ctrl.data = cpu_to_le32(status.data);
+}
+
+static inline void release_desc(struct ksz_desc *desc)
+{
+ desc->sw.ctrl.tx.hw_owned = 1;
+ if (desc->sw.buf_size != desc->sw.buf.data) {
+ desc->sw.buf_size = desc->sw.buf.data;
+ desc->phw->buf.data = cpu_to_le32(desc->sw.buf.data);
+ }
+ desc->phw->ctrl.data = cpu_to_le32(desc->sw.ctrl.data);
+}
+
+static void get_rx_pkt(struct ksz_desc_info *info, struct ksz_desc **desc)
+{
+ *desc = &info->ring[info->last];
+ info->last++;
+ info->last &= info->mask;
+ info->avail--;
+ (*desc)->sw.buf.data &= ~KS_DESC_RX_MASK;
+}
+
+static inline void set_rx_buf(struct ksz_desc *desc, u32 addr)
+{
+ desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_rx_len(struct ksz_desc *desc, u32 len)
+{
+ desc->sw.buf.rx.buf_size = len;
+}
+
+static inline void get_tx_pkt(struct ksz_desc_info *info,
+ struct ksz_desc **desc)
+{
+ *desc = &info->ring[info->next];
+ info->next++;
+ info->next &= info->mask;
+ info->avail--;
+ (*desc)->sw.buf.data &= ~KS_DESC_TX_MASK;
+}
+
+static inline void set_tx_buf(struct ksz_desc *desc, u32 addr)
+{
+ desc->phw->addr = cpu_to_le32(addr);
+}
+
+static inline void set_tx_len(struct ksz_desc *desc, u32 len)
+{
+ desc->sw.buf.tx.buf_size = len;
+}
+
+/**
+ * delay_micro - delay in microsecond
+ * @microsec: Number of microseconds to delay.
+ *
+ * This routine delays in microseconds.
+ */
+static void delay_micro(uint microsec)
+{
+ uint millisec = microsec / 1000;
+
+ microsec %= 1000;
+ if (millisec)
+ mdelay(millisec);
+ if (microsec)
+ udelay(microsec);
+}
+
+/**
+ * delay_milli - delay in millisecond
+ * @millisec: Number of milliseconds to delay.
+ *
+ * This routine delays in milliseconds.
+ */
+static void delay_milli(uint millisec)
+{
+ unsigned long ticks = millisec * HZ / 1000;
+
+ if (!ticks || in_interrupt())
+ mdelay(millisec);
+ else {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(ticks);
+ }
+}
+
+/* Switch functions */
+
+#define TABLE_READ 0x10
+#define TABLE_SEL_SHIFT 2
+
+#define HW_DELAY(hw, reg) \
+ do { \
+ u16 dummy; \
+ HW_R16(hw, reg, &dummy); \
+ } while (0)
+
+/**
+ * sw_r_table - read 4 bytes of data from switch table
+ * @hw: The hardware instance.
+ * @table: The table selector.
+ * @addr: The address of the table entry.
+ * @data: Buffer to store the read data.
+ *
+ * This routine reads 4 bytes of data from the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void sw_r_table(struct ksz_hw *hw, int table, u16 addr, u32 *data)
+{
+ u16 ctrl_addr;
+ uint interrupt;
+
+ ctrl_addr = (((table << TABLE_SEL_SHIFT) | TABLE_READ) << 8) | addr;
+
+ interrupt = hw_block_intr(hw);
+
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+ HW_R32(hw, KS884X_ACC_DATA_0_OFFSET, data);
+
+ hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_table - write 4 bytes of data to the switch table
+ * @hw: The hardware instance.
+ * @table: The table selector.
+ * @addr: The address of the table entry.
+ * @data: Data to be written.
+ *
+ * This routine writes 4 bytes of data to the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of written data.
+ */
+static void sw_w_table(struct ksz_hw *hw, int table, u16 addr, u32 data)
+{
+ u16 ctrl_addr;
+ uint interrupt;
+
+ ctrl_addr = ((table << TABLE_SEL_SHIFT) << 8) | addr;
+
+ interrupt = hw_block_intr(hw);
+
+ HW_W32(hw, KS884X_ACC_DATA_0_OFFSET, data);
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+ hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_r_table_64 - read 8 bytes of data from the switch table
+ * @hw: The hardware instance.
+ * @table: The table selector.
+ * @addr: The address of the table entry.
+ * @data_hi: Buffer to store the high part of read data (bit63 ~ bit32).
+ * @data_lo: Buffer to store the low part of read data (bit31 ~ bit0).
+ *
+ * This routine reads 8 bytes of data from the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void sw_r_table_64(struct ksz_hw *hw, int table, u16 addr, u32 *data_hi,
+ u32 *data_lo)
+{
+ u16 ctrl_addr;
+ uint interrupt;
+
+ ctrl_addr = (((table << TABLE_SEL_SHIFT) | TABLE_READ) << 8) | addr;
+
+ interrupt = hw_block_intr(hw);
+
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+ HW_R32(hw, KS884X_ACC_DATA_4_OFFSET, data_hi);
+ HW_R32(hw, KS884X_ACC_DATA_0_OFFSET, data_lo);
+
+ hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * sw_w_table_64 - write 8 bytes of data to the switch table
+ * @hw: The hardware instance.
+ * @table: The table selector.
+ * @addr: The address of the table entry.
+ * @data_hi: The high part of data to be written (bit63 ~ bit32).
+ * @data_lo: The low part of data to be written (bit31 ~ bit0).
+ *
+ * This routine writes 8 bytes of data to the table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of written data.
+ */
+static void sw_w_table_64(struct ksz_hw *hw, int table, u16 addr, u32 data_hi,
+ u32 data_lo)
+{
+ u16 ctrl_addr;
+ uint interrupt;
+
+ ctrl_addr = ((table << TABLE_SEL_SHIFT) << 8) | addr;
+
+ interrupt = hw_block_intr(hw);
+
+ HW_W32(hw, KS884X_ACC_DATA_4_OFFSET, data_hi);
+ HW_W32(hw, KS884X_ACC_DATA_0_OFFSET, data_lo);
+
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+ hw_restore_intr(hw, interrupt);
+}
+
+static inline int valid_dyn_entry(struct ksz_hw *hw, u8 *data)
+{
+ int timeout = 100;
+
+ do {
+ HW_R8(hw, KS884X_ACC_DATA_8_OFFSET, data);
+ timeout--;
+ } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
+
+ /* Entry is not ready for accessing. */
+ if (*data & DYNAMIC_MAC_TABLE_NOT_READY)
+ return 1;
+
+ /* Entry is ready for accessing. */
+ else {
+ /* There is no valid entry in the table. */
+ if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
+ return 2;
+ }
+ return 0;
+}
+
+/**
+ * sw_r_dyn_mac_table - read from dynamic MAC table
+ * @hw: The hardware instance.
+ * @addr: The address of the table entry.
+ * @mac_addr: Buffer to store the MAC address.
+ * @fid: Buffer to store the FID.
+ * @src_port: Buffer to store the source port number.
+ * @timestamp: Buffer to store the timestamp.
+ * @entries: Buffer to store the number of entries. If this is zero, the
+ * table is empty and so this function should not be called again
+ * until later.
+ *
+ * This function reads an entry of the dynamic MAC table of the switch.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ *
+ * Return 0 if the entry is successfully read; otherwise -1.
+ */
+static int sw_r_dyn_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr,
+ u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+{
+ u32 data_hi;
+ u32 data_lo;
+ u16 ctrl_addr;
+ int rc;
+ uint interrupt;
+ u8 data;
+
+ ctrl_addr = (((TABLE_DYNAMIC_MAC << TABLE_SEL_SHIFT) | TABLE_READ) <<
+ 8) | addr;
+
+ interrupt = hw_block_intr(hw);
+
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+ rc = valid_dyn_entry(hw, &data);
+ if (1 == rc) {
+ if (0 == addr)
+ *entries = 0;
+ } else if (2 == rc)
+ *entries = 0;
+ /* At least one valid entry in the table. */
+ else {
+ HW_R32(hw, KS884X_ACC_DATA_4_OFFSET, &data_hi);
+
+ /* Check out how many valid entry in the table. */
+ *entries = (u16)(((((u16)
+ data & DYNAMIC_MAC_TABLE_ENTRIES_H) <<
+ DYNAMIC_MAC_ENTRIES_H_SHIFT) |
+ (((data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
+ DYNAMIC_MAC_ENTRIES_SHIFT))) + 1);
+
+ *fid = (u8)((data_hi & DYNAMIC_MAC_TABLE_FID) >>
+ DYNAMIC_MAC_FID_SHIFT);
+ *src_port = (u8)((data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
+ DYNAMIC_MAC_SRC_PORT_SHIFT);
+ *timestamp = (u8)((
+ data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
+ DYNAMIC_MAC_TIMESTAMP_SHIFT);
+
+ HW_R32(hw, KS884X_ACC_DATA_0_OFFSET, &data_lo);
+
+ mac_addr[5] = (u8) data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8) data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ rc = 0;
+ }
+
+ hw_restore_intr(hw, interrupt);
+
+ return rc;
+}
+
+static void sw_d_dyn_mac_table(struct ksz_hw *hw)
+{
+ u16 entries = 0;
+ u16 i;
+ u8 mac_addr[MAC_ADDR_LEN];
+ u8 ports = 0;
+ u8 timestamp = 0;
+ u8 fid = 0;
+
+ memset(mac_addr, 0, MAC_ADDR_LEN);
+ i = 0;
+ do {
+ if (!sw_r_dyn_mac_table(hw, i, mac_addr, &fid, &ports,
+ ×tamp, &entries)) {
+ printk(KERN_INFO
+ "%02X:%02X:%02X:%02X:%02X:%02X %x %x %x %03x\n",
+ mac_addr[0], mac_addr[1], mac_addr[2],
+ mac_addr[3], mac_addr[4], mac_addr[5],
+ fid, ports, timestamp, entries);
+ }
+ i++;
+ } while (i < entries);
+}
+
+/**
+ * sw_r_sta_mac_table - read from static MAC table
+ * @hw: The hardware instance.
+ * @addr: The address of the table entry.
+ * @mac_addr: Buffer to store the MAC address.
+ * @ports: Buffer to store the port members.
+ * @override: Buffer to store the override flag.
+ * @use_fid: Buffer to store the use FID flag which indicates the FID is
+ * valid.
+ * @fid: Buffer to store the FID.
+ *
+ * This function reads an entry of the static MAC table of the switch. It
+ * calls sw_r_table_64() to get the data.
+ *
+ * Return 0 if the entry is valid; otherwise -1.
+ */
+static int sw_r_sta_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr,
+ u8 *ports, int *override, int *use_fid, u8 *fid)
+{
+ u32 data_hi;
+ u32 data_lo;
+
+ sw_r_table_64(hw, TABLE_STATIC_MAC, addr, &data_hi, &data_lo);
+ if (data_hi & STATIC_MAC_TABLE_VALID) {
+ mac_addr[5] = (u8) data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+ mac_addr[1] = (u8) data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ *ports = (u8)((data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
+ STATIC_MAC_FWD_PORTS_SHIFT);
+ *override = (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
+ *use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
+ *fid = (u8)((data_hi & STATIC_MAC_TABLE_FID) >>
+ STATIC_MAC_FID_SHIFT);
+ return 0;
+ }
+ return -1;
+}
+
+/**
+ * sw_w_sta_mac_table - write to the static MAC table
+ * @hw: The hardware instance.
+ * @addr: The address of the table entry.
+ * @mac_addr: The MAC address.
+ * @ports: The port members.
+ * @override: The flag to override the port receive/transmit settings.
+ * @valid: The flag to indicate entry is valid.
+ * @use_fid: The flag to indicate the FID is valid.
+ * @fid: The FID value.
+ *
+ * This routine writes an entry of the static MAC table of the switch. It
+ * calls sw_w_table_64() to write the data.
+ */
+static void sw_w_sta_mac_table(struct ksz_hw *hw, u16 addr, u8 *mac_addr,
+ u8 ports, int override, int valid, int use_fid, u8 fid)
+{
+ u32 data_hi;
+ u32 data_lo;
+
+ data_lo = ((u32) mac_addr[2] << 24) |
+ ((u32) mac_addr[3] << 16) |
+ ((u32) mac_addr[4] << 8) | mac_addr[5];
+ data_hi = ((u32) mac_addr[0] << 8) | mac_addr[1];
+ data_hi |= (u32) ports << STATIC_MAC_FWD_PORTS_SHIFT;
+
+ if (override)
+ data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+ if (use_fid) {
+ data_hi |= STATIC_MAC_TABLE_USE_FID;
+ data_hi |= (u32) fid << STATIC_MAC_FID_SHIFT;
+ }
+ if (valid)
+ data_hi |= STATIC_MAC_TABLE_VALID;
+
+ sw_w_table_64(hw, TABLE_STATIC_MAC, addr, data_hi, data_lo);
+}
+
+static void sw_d_sta_mac_table(struct ksz_hw *hw)
+{
+ u16 i;
+ u8 mac_addr[MAC_ADDR_LEN];
+ u8 ports;
+ int override;
+ int use_fid;
+ u8 fid;
+
+ i = 0;
+ do {
+ if (!sw_r_sta_mac_table(hw, i, mac_addr, &ports, &override,
+ &use_fid, &fid)) {
+ printk(KERN_INFO
+ "%02X:%02X:%02X:%02X:%02X:%02X %02x %u %u:%x\n",
+ mac_addr[0], mac_addr[1], mac_addr[2],
+ mac_addr[3], mac_addr[4], mac_addr[5],
+ ports, override, use_fid, fid);
+ }
+ i++;
+ } while (i < STATIC_MAC_TABLE_ENTRIES);
+}
+
+/**
+ * sw_r_vlan_table - read from the VLAN table
+ * @hw: The hardware instance.
+ * @addr: The address of the table entry.
+ * @vid: Buffer to store the VID.
+ * @fid: Buffer to store the VID.
+ * @member: Buffer to store the port membership.
+ *
+ * This function reads an entry of the VLAN table of the switch. It calls
+ * sw_r_table() to get the data.
+ *
+ * Return 0 if the entry is valid; otherwise -1.
+ */
+static int sw_r_vlan_table(struct ksz_hw *hw, u16 addr, u16 *vid, u8 *fid,
+ u8 *member)
+{
+ u32 data;
+
+ sw_r_table(hw, TABLE_VLAN, addr, &data);
+ if (data & VLAN_TABLE_VALID) {
+ *vid = (u16)(data & VLAN_TABLE_VID);
+ *fid = (u8)((data & VLAN_TABLE_FID) >> VLAN_TABLE_FID_SHIFT);
+ *member = (u8)((data & VLAN_TABLE_MEMBERSHIP) >>
+ VLAN_TABLE_MEMBERSHIP_SHIFT);
+ return 0;
+ }
+ return -1;
+}
+
+/**
+ * sw_w_vlan_table - write to the VLAN table
+ * @hw: The hardware instance.
+ * @addr: The address of the table entry.
+ * @vid: The VID value.
+ * @fid: The FID value.
+ * @member: The port membership.
+ * @valid: The flag to indicate entry is valid.
+ *
+ * This routine writes an entry of the VLAN table of the switch. It calls
+ * sw_w_table() to write the data.
+ */
+static void sw_w_vlan_table(struct ksz_hw *hw, u16 addr, u16 vid, u8 fid,
+ u8 member, int valid)
+{
+ u32 data;
+ int entry;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ data = vid;
+ data |= (u32) fid << VLAN_TABLE_FID_SHIFT;
+ data |= (u32) member << VLAN_TABLE_MEMBERSHIP_SHIFT;
+ if (valid)
+ data |= VLAN_TABLE_VALID;
+
+ sw_w_table(hw, TABLE_VLAN, addr, data);
+
+ entry = addr;
+ if (entry >= VLAN_TABLE_ENTRIES)
+ return;
+ if (valid) {
+ sw->vlan_table[entry].vid = vid;
+ sw->vlan_table[entry].fid = fid;
+ sw->vlan_table[entry].member = member;
+ } else {
+ sw->vlan_table[entry].vid = 0;
+ sw->vlan_table[entry].fid = 0;
+ sw->vlan_table[entry].member = 0;
+ }
+}
+
+/**
+ * port_r_mib_cnt - read MIB counter
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @addr: The address of the counter.
+ * @cnt: Buffer to store the counter.
+ *
+ * This routine reads a MIB counter of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_cnt(struct ksz_hw *hw, int port, u16 addr, u64 *cnt)
+{
+ u32 data;
+ u16 ctrl_addr;
+ uint interrupt;
+ int timeout;
+
+ ctrl_addr = addr + PORT_COUNTER_NUM * port;
+
+ interrupt = hw_block_intr(hw);
+
+ ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ) << 8);
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+
+ for (timeout = 100; timeout > 0; timeout--) {
+ HW_R32(hw, KS884X_ACC_DATA_0_OFFSET, &data);
+
+ if (data & MIB_COUNTER_VALID) {
+ if (data & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_COUNTER_VALUE + 1;
+ *cnt += data & MIB_COUNTER_VALUE;
+ break;
+ }
+ }
+
+ hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * port_r_mib_pkt - read dropped packet counts
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @cnt: Buffer to store the receive and transmit dropped packet counts.
+ *
+ * This routine reads the dropped packet counts of the port.
+ * Hardware interrupts are disabled to minimize corruption of read data.
+ */
+static void port_r_mib_pkt(struct ksz_hw *hw, int port, u32 *last, u64 *cnt)
+{
+ u32 cur;
+ u32 data;
+ u16 ctrl_addr;
+ uint interrupt;
+ int index;
+
+ index = KS_MIB_PACKET_DROPPED_RX_0 + port;
+ do {
+ interrupt = hw_block_intr(hw);
+
+ ctrl_addr = (u16) index;
+ ctrl_addr |= (((TABLE_MIB << TABLE_SEL_SHIFT) | TABLE_READ)
+ << 8);
+ HW_W16(hw, KS884X_IACR_OFFSET, ctrl_addr);
+ HW_DELAY(hw, KS884X_IACR_OFFSET);
+ HW_R32(hw, KS884X_ACC_DATA_0_OFFSET, &data);
+
+ hw_restore_intr(hw, interrupt);
+
+ data &= MIB_PACKET_DROPPED;
+ cur = *last;
+ if (data != cur) {
+ *last = data;
+ if (data < cur)
+ data += MIB_PACKET_DROPPED + 1;
+ data -= cur;
+ *cnt += data;
+ }
+ ++last;
+ ++cnt;
+ index -= KS_MIB_PACKET_DROPPED_TX -
+ KS_MIB_PACKET_DROPPED_TX_0 + 1;
+ } while (index >= KS_MIB_PACKET_DROPPED_TX_0 + port);
+}
+
+/**
+ * port_r_cnt - read MIB counters periodically
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine is used to read the counters of the port periodically to avoid
+ * counter overflow. The hardware should be acquired first before calling this
+ * routine.
+ *
+ * Return non-zero when not all counters not read.
+ */
+static int port_r_cnt(struct ksz_hw *hw, int port)
+{
+ struct ksz_port_mib *mib = &hw->port_mib[port];
+
+ if (mib->mib_start < PORT_COUNTER_NUM)
+ while (mib->cnt_ptr < PORT_COUNTER_NUM) {
+ port_r_mib_cnt(hw, port, mib->cnt_ptr,
+ &mib->counter[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+ if (hw->mib_cnt > PORT_COUNTER_NUM)
+ port_r_mib_pkt(hw, port, mib->dropped,
+ &mib->counter[PORT_COUNTER_NUM]);
+ mib->cnt_ptr = 0;
+ return 0;
+}
+
+/**
+ * port_init_cnt - initialize MIB counter values
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine is used to initialize all counters to zero if the hardware
+ * cannot do it after reset.
+ */
+static void port_init_cnt(struct ksz_hw *hw, int port)
+{
+ struct ksz_port_mib *mib = &hw->port_mib[port];
+
+ mib->cnt_ptr = 0;
+ if (mib->mib_start < PORT_COUNTER_NUM)
+ do {
+ port_r_mib_cnt(hw, port, mib->cnt_ptr,
+ &mib->counter[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ } while (mib->cnt_ptr < PORT_COUNTER_NUM);
+ if (hw->mib_cnt > PORT_COUNTER_NUM)
+ port_r_mib_pkt(hw, port, mib->dropped,
+ &mib->counter[PORT_COUNTER_NUM]);
+ memset((void *) mib->counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+ mib->cnt_ptr = 0;
+}
+
+/*
+ * Port functions
+ */
+
+/**
+ * port_chk - check port register bits
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @bits: The data bits to check.
+ *
+ * This function checks whether the specified bits of the port register are set
+ * or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int port_chk(struct ksz_hw *hw, int port, int offset, u16 bits)
+{
+ u32 addr;
+ u16 data;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_R16(hw, addr, &data);
+ return (data & bits) == bits;
+}
+
+/**
+ * port_cfg - set port register bits
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @bits: The data bits to set.
+ * @set: The flag indicating whether the bits are to be set or not.
+ *
+ * This routine sets or resets the specified bits of the port register.
+ */
+static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits,
+ int set)
+{
+ u32 addr;
+ u16 data;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_R16(hw, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ HW_W16(hw, addr, data);
+}
+
+/**
+ * port_chk_shift - check port bit
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the register.
+ * @shift: Number of bits to shift.
+ *
+ * This function checks whether the specified port is set in the register or
+ * not.
+ *
+ * Return 0 if the port is not set.
+ */
+static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift)
+{
+ u16 data;
+ u16 bit = 1 << port;
+
+ HW_R16(hw, addr, &data);
+ data >>= shift;
+ return (data & bit) == bit;
+}
+
+/**
+ * port_cfg_shift - set port bit
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the register.
+ * @shift: Number of bits to shift.
+ * @set: The flag indicating whether the port is to be set or not.
+ *
+ * This routine sets or resets the specified port in the register.
+ */
+static void port_cfg_shift(struct ksz_hw *hw, int port, u32 addr, int shift,
+ int set)
+{
+ u16 data;
+ u16 bits = 1 << port;
+
+ HW_R16(hw, addr, &data);
+ bits <<= shift;
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ HW_W16(hw, addr, data);
+}
+
+/**
+ * port_r8 - read byte from port register
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @data: Buffer to store the data.
+ *
+ * This routine reads a byte from the port register.
+ */
+static void port_r8(struct ksz_hw *hw, int port, int offset, u8 *data)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_R8(hw, addr, data);
+}
+
+/**
+ * port_w8 - write byte to port register
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @data: Data to write.
+ *
+ * This routine writes a byte to the port register.
+ */
+static void port_w8(struct ksz_hw *hw, int port, int offset, u8 data)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_W8(hw, addr, data);
+}
+
+/**
+ * port_r16 - read word from port register.
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @data: Buffer to store the data.
+ *
+ * This routine reads a word from the port register.
+ */
+static void port_r16(struct ksz_hw *hw, int port, int offset, u16 *data)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_R16(hw, addr, data);
+}
+
+/**
+ * port_w16 - write word to port register.
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The offset of the port register.
+ * @data: Data to write.
+ *
+ * This routine writes a word to the port register.
+ */
+static void port_w16(struct ksz_hw *hw, int port, int offset, u16 data)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += offset;
+ HW_W16(hw, addr, data);
+}
+
+/**
+ * sw_chk - check switch register bits
+ * @hw: The hardware instance.
+ * @addr: The address of the switch register.
+ * @bits: The data bits to check.
+ *
+ * This function checks whether the specified bits of the switch register are
+ * set or not.
+ *
+ * Return 0 if the bits are not set.
+ */
+static int sw_chk(struct ksz_hw *hw, u32 addr, u16 bits)
+{
+ u16 data;
+
+ HW_R16(hw, addr, &data);
+ return (data & bits) == bits;
+}
+
+/**
+ * sw_cfg - set switch register bits
+ * @hw: The hardware instance.
+ * @addr: The address of the switch register.
+ * @bits: The data bits to set.
+ * @set: The flag indicating whether the bits are to be set or not.
+ *
+ * This function sets or resets the specified bits of the switch register.
+ */
+static void sw_cfg(struct ksz_hw *hw, u32 addr, u16 bits, int set)
+{
+ u16 data;
+
+ HW_R16(hw, addr, &data);
+ if (set)
+ data |= bits;
+ else
+ data &= ~bits;
+ HW_W16(hw, addr, data);
+}
+
+/* Bandwidth */
+
+static inline void port_cfg_broad_storm(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM, set);
+}
+
+static inline int port_chk_broad_storm(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM);
+}
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROTECTION_RATE 10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE 9969
+
+/**
+ * sw_cfg_broad_storm - configure broadcast storm threshold
+ * @hw: The hardware instance.
+ * @percent: Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ */
+static void sw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+ u16 data;
+ u32 value = ((u32) BROADCAST_STORM_VALUE * (u32) percent / 100);
+
+ if (value > BROADCAST_STORM_RATE)
+ value = BROADCAST_STORM_RATE;
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_3_OFFSET, &data);
+ data &= ~(BROADCAST_STORM_RATE_LO | BROADCAST_STORM_RATE_HI);
+ data |= ((value & 0x00FF) << 8) | ((value & 0xFF00) >> 8);
+ HW_W16(hw, KS8842_SWITCH_CTRL_3_OFFSET, data);
+}
+
+/**
+ * sw_get_board_storm - get broadcast storm threshold
+ * @hw: The hardware instance.
+ * @percent: Buffer to store the broadcast storm threshold percentage.
+ *
+ * This routine retrieves the broadcast storm threshold of the switch.
+ */
+static void sw_get_broad_storm(struct ksz_hw *hw, u8 *percent)
+{
+ int num;
+ u16 data;
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_3_OFFSET, &data);
+ num = (data & BROADCAST_STORM_RATE_HI);
+ num <<= 8;
+ num |= (data & BROADCAST_STORM_RATE_LO) >> 8;
+ num = (num * 100 + BROADCAST_STORM_VALUE / 2) / BROADCAST_STORM_VALUE;
+ *percent = (u8) num;
+}
+
+/**
+ * sw_dis_broad_storm - disable broadstorm
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine disables the broadcast storm limit function of the switch.
+ */
+static void sw_dis_broad_storm(struct ksz_hw *hw, int port)
+{
+ port_cfg_broad_storm(hw, port, 0);
+}
+
+/**
+ * sw_ena_broad_storm - enable broadcast storm
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine enables the broadcast storm limit function of the switch.
+ */
+static void sw_ena_broad_storm(struct ksz_hw *hw, int port)
+{
+ sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+ port_cfg_broad_storm(hw, port, 1);
+}
+
+/**
+ * sw_init_broad_storm - initialize broadcast storm
+ * @hw: The hardware instance.
+ *
+ * This routine initializes the broadcast storm limit function of the switch.
+ */
+static void sw_init_broad_storm(struct ksz_hw *hw)
+{
+ int port;
+
+ hw->ksz_switch->broad_per = 1;
+ sw_cfg_broad_storm(hw, hw->ksz_switch->broad_per);
+ for (port = 0; port < TOTAL_PORT_NUM; port++)
+ sw_dis_broad_storm(hw, port);
+ sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, MULTICAST_STORM_DISABLE, 1);
+}
+
+/**
+ * hw_cfg_broad_storm - configure broadcast storm
+ * @hw: The hardware instance.
+ * @percent: Broadcast storm threshold in percent of transmit rate.
+ *
+ * This routine configures the broadcast storm threshold of the switch.
+ * It is called by user functions. The hardware should be acquired first.
+ */
+static void hw_cfg_broad_storm(struct ksz_hw *hw, u8 percent)
+{
+ if (percent > 100)
+ percent = 100;
+
+ sw_cfg_broad_storm(hw, percent);
+ sw_get_broad_storm(hw, &percent);
+ hw->ksz_switch->broad_per = percent;
+}
+
+#define RATE_LIMIT_TABLE_ENTRY 15
+
+static uint rate_limit_table[] = {
+ 0,
+ 64, /* 64Kbps */
+ 128, /* 128Kbps */
+ 256, /* 256Kbps */
+ 512, /* 512Kbps */
+ 1024, /* 1Mbps */
+ 2048, /* 2Mbps */
+ 4096, /* 4Mbps */
+ 8192, /* 8Mbps */
+ 16384, /* 16Mbps */
+ 32768, /* 32Mbps */
+ 49152, /* 48Mbps */
+ 65536, /* 64Mbps */
+ 73728, /* 72Mbps */
+ 81920, /* 80Mbps */
+ 90112, /* 88Mbps */
+};
+
+static int get_rate_to_val(uint rate)
+{
+ int i;
+
+ for (i = 1; i <= RATE_LIMIT_TABLE_ENTRY; i++)
+ if (rate < rate_limit_table[i])
+ return i - 1;
+
+ return RATE_LIMIT_TABLE_ENTRY;
+}
+
+/**
+ * port_cfg_rate - configure port priority rate
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The receive or transmit, high or low priority, rate offset.
+ * @shift: The shift position to set the value.
+ * @rate: The rate limit in number of Kbps.
+ *
+ * This routine configures the priority rate of the port.
+ */
+static void port_cfg_rate(struct ksz_hw *hw, int port, int offset, int shift,
+ uint rate)
+{
+ u8 data;
+ u8 factor;
+
+ factor = (u8) get_rate_to_val(rate);
+
+ port_r8(hw, port, offset, &data);
+ data &= ~(PORT_PRIORITY_RATE << shift);
+ data |= (u8)(factor << shift);
+ port_w8(hw, port, offset, data);
+}
+
+/**
+ * port_get_rate - get port priority rate
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @offset: The receive or transmit, high or low priority, rate offset.
+ * @shift: The shift position to get the value.
+ * @rate: Buffer to store the data rate in number of Kbps.
+ *
+ * This routine retrieves the priority rate of the port.
+ */
+static void port_get_rate(struct ksz_hw *hw, int port, int offset, int shift,
+ uint *rate)
+{
+ u8 data;
+
+ port_r8(hw, port, offset, &data);
+ data >>= shift;
+ data &= PORT_PRIORITY_RATE;
+ *rate = rate_limit_table[data];
+}
+
+/**
+ * hw_cfg_prio_rate - configure port priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @prio: The priority index to configure.
+ * @rate: The rate limit in number of Kbps.
+ * @offset: The receive or transmit rate offset.
+ * @result: Buffer to store the data rate in number of Kbps.
+ *
+ * This routine configures the priority rate of the port and retrieves the
+ * actual rate number.
+ */
+static void hw_cfg_prio_rate(struct ksz_hw *hw, int port, int prio, uint rate,
+ int offset, uint *result)
+{
+ int shift;
+
+ offset += prio / 2;
+ shift = PORT_PRIORITY_RATE_SHIFT * (prio & 1);
+
+ port_cfg_rate(hw, port, offset, shift, rate);
+ port_get_rate(hw, port, offset, shift, result);
+}
+
+/**
+ * hw_cfg_rx_prio_rate - configure port receive priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @prio: The priority index to configure.
+ * @rate: The rate limit in number of Kbps.
+ *
+ * This routine configures the receive priority rate of the port.
+ * It is called by user functions. The hardware should be acquired first.
+ */
+static void hw_cfg_rx_prio_rate(struct ksz_hw *hw, int port, int prio,
+ uint rate)
+{
+ hw_cfg_prio_rate(hw, port, prio, rate,
+ KS8842_PORT_IN_RATE_OFFSET,
+ &hw->ksz_switch->port_cfg[port].rx_rate[prio]);
+}
+
+/**
+ * hw_cfg_tx_prio_rate - configure port transmit priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @prio: The priority index to configure.
+ * @rate: The rate limit in number of Kbps.
+ *
+ * This routine configures the transmit priority rate of the port.
+ * It is called by user functions. The hardware should be acquired first.
+ */
+static void hw_cfg_tx_prio_rate(struct ksz_hw *hw, int port, int prio,
+ uint rate)
+{
+ hw_cfg_prio_rate(hw, port, prio, rate,
+ KS8842_PORT_OUT_RATE_OFFSET,
+ &hw->ksz_switch->port_cfg[port].tx_rate[prio]);
+}
+
+/**
+ * sw_chk_prio_rate - check switch priority rate
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This function checks whether the priority rate function of the switch is
+ * enabled.
+ *
+ * Return 0 if not enabled.
+ */
+static int sw_chk_prio_rate(struct ksz_hw *hw, int port)
+{
+ u32 addr;
+ u32 rate;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS8842_PORT_IN_RATE_OFFSET;
+ HW_R32(hw, addr, &rate);
+ return rate != 0;
+}
+
+/**
+ * sw_dis_prio_rate - disable switch priority rate
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine disables the priority rate function of the switch.
+ */
+static void sw_dis_prio_rate(struct ksz_hw *hw, int port)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS8842_PORT_IN_RATE_OFFSET;
+ HW_W32(hw, addr, 0);
+}
+
+/**
+ * sw_ena_prio_rate - enable switch priority rate
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine enables the priority rate function of the switch.
+ */
+static void sw_ena_prio_rate(struct ksz_hw *hw, int port)
+{
+ int prio;
+
+ for (prio = 0; prio < PRIO_QUEUES; prio++) {
+ hw_cfg_rx_prio_rate(hw, port, prio,
+ hw->ksz_switch->port_cfg[port].rx_rate[prio]);
+ hw_cfg_tx_prio_rate(hw, port, prio,
+ hw->ksz_switch->port_cfg[port].tx_rate[prio]);
+ }
+}
+
+/**
+ * sw_init_prio_rate - initialize switch prioirty rate
+ * @hw: The hardware instance.
+ *
+ * This routine initializes the priority rate function of the switch.
+ */
+static void sw_init_prio_rate(struct ksz_hw *hw)
+{
+ int port;
+ int prio;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ for (port = 0; port < TOTAL_PORT_NUM; port++) {
+ for (prio = 0; prio < PRIO_QUEUES; prio++) {
+ sw->port_cfg[port].rx_rate[prio] =
+ sw->port_cfg[port].tx_rate[prio] = 0;
+ }
+ sw_dis_prio_rate(hw, port);
+ }
+}
+
+/* Communication */
+
+static inline void port_cfg_back_pressure(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE, set);
+}
+
+static inline void port_cfg_force_flow_ctrl(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL, set);
+}
+
+static inline int port_chk_back_pressure(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE);
+}
+
+static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL);
+}
+
+/* Spanning Tree */
+
+static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set);
+}
+
+static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_RX_ENABLE, set);
+}
+
+static inline void port_cfg_tx(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_TX_ENABLE, set);
+}
+
+static inline void sw_cfg_fast_aging(struct ksz_hw *hw, int set)
+{
+ sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, SWITCH_FAST_AGING, set);
+}
+
+static inline void sw_flush_dyn_mac_table(struct ksz_hw *hw)
+{
+ if (!(hw->overrides & FAST_AGING)) {
+ sw_cfg_fast_aging(hw, 1);
+ delay_milli(1);
+ sw_cfg_fast_aging(hw, 0);
+ }
+}
+
+/* VLAN */
+
+static inline void port_cfg_ins_tag(struct ksz_hw *hw, int p, int insert)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG, insert);
+}
+
+static inline void port_cfg_rmv_tag(struct ksz_hw *hw, int p, int remove)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG, remove);
+}
+
+static inline int port_chk_ins_tag(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG);
+}
+
+static inline int port_chk_rmv_tag(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG);
+}
+
+static inline void port_cfg_dis_non_vid(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID, set);
+}
+
+static inline void port_cfg_in_filter(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER, set);
+}
+
+static inline int port_chk_dis_non_vid(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID);
+}
+
+static inline int port_chk_in_filter(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER);
+}
+
+/* Mirroring */
+
+static inline void port_cfg_mirror_sniffer(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_SNIFFER, set);
+}
+
+static inline void port_cfg_mirror_rx(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_RX, set);
+}
+
+static inline void port_cfg_mirror_tx(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_MIRROR_TX, set);
+}
+
+static inline void sw_cfg_mirror_rx_tx(struct ksz_hw *hw, int set)
+{
+ sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_MIRROR_RX_TX, set);
+}
+
+static void sw_init_mirror(struct ksz_hw *hw)
+{
+ int port;
+
+ for (port = 0; port < TOTAL_PORT_NUM; port++) {
+ port_cfg_mirror_sniffer(hw, port, 0);
+ port_cfg_mirror_rx(hw, port, 0);
+ port_cfg_mirror_tx(hw, port, 0);
+ }
+ sw_cfg_mirror_rx_tx(hw, 0);
+}
+
+static inline void sw_cfg_unk_def_deliver(struct ksz_hw *hw, int set)
+{
+ sw_cfg(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+ SWITCH_UNK_DEF_PORT_ENABLE, set);
+}
+
+static inline int sw_cfg_chk_unk_def_deliver(struct ksz_hw *hw)
+{
+ return sw_chk(hw, KS8842_SWITCH_CTRL_7_OFFSET,
+ SWITCH_UNK_DEF_PORT_ENABLE);
+}
+
+static inline void sw_cfg_unk_def_port(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0, set);
+}
+
+static inline int sw_chk_unk_def_port(struct ksz_hw *hw, int port)
+{
+ return port_chk_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0);
+}
+
+/* Priority */
+
+static inline void port_cfg_diffserv(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE, set);
+}
+
+static inline void port_cfg_802_1p(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE, set);
+}
+
+static inline void port_cfg_replace_vid(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING, set);
+}
+
+static inline void port_cfg_prio(struct ksz_hw *hw, int p, int set)
+{
+ port_cfg(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE, set);
+}
+
+static inline int port_chk_diffserv(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE);
+}
+
+static inline int port_chk_802_1p(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE);
+}
+
+static inline int port_chk_replace_vid(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING);
+}
+
+static inline int port_chk_prio(struct ksz_hw *hw, int p)
+{
+ return port_chk(hw, p,
+ KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE);
+}
+
+#define MAX_TOS_IN_FIRST_TOS_BANK 48
+
+/**
+ * sw_set_tos_prio - program switch TOS priority
+ * @hw: The hardware instance.
+ * @tos: ToS value from 6-bit (bit7 ~ bit2) of ToS field, ranging from 0
+ * to 63.
+ * @prio: Priority to be assigned.
+ *
+ * This routine programs the TOS priority into the switch registers.
+ */
+static void sw_set_tos_prio(struct ksz_hw *hw, u8 tos, u16 prio)
+{
+ int offset;
+ int shift;
+ int index;
+ u16 data;
+ u16 mask = KS8842_PRIORITY_MASK;
+
+ if (tos < MAX_TOS_IN_FIRST_TOS_BANK) {
+ offset = KS8842_TOS_1_OFFSET;
+ index = tos / 8;
+ } else {
+ offset = KS8842_TOS_7_OFFSET;
+ index = (tos - MAX_TOS_IN_FIRST_TOS_BANK) / 8;
+ }
+
+ if (index > 0)
+ offset += (index << 1);
+
+ shift = (tos % 8) * KS8842_PRIORITY_SHIFT;
+ prio = prio << shift;
+ mask <<= shift;
+
+ HW_R16(hw, offset, &data);
+ data &= ~mask;
+ data |= prio;
+ HW_W16(hw, offset, data);
+}
+
+/**
+ * sw_dis_diffserv - disable switch DiffServ priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine disables the DiffServ priority function of the switch.
+ */
+static void sw_dis_diffserv(struct ksz_hw *hw, int port)
+{
+ port_cfg_diffserv(hw, port, 0);
+}
+
+/**
+ * sw_ena_diffserv - enable switch DiffServ priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine enables the DiffServ priority function of the switch.
+ */
+static void sw_ena_diffserv(struct ksz_hw *hw, int port)
+{
+ u8 tos;
+
+ for (tos = 0; tos < DIFFSERV_ENTRIES; tos++)
+ sw_set_tos_prio(hw, tos, hw->ksz_switch->diffserv[tos]);
+
+ port_cfg_diffserv(hw, port, 1);
+}
+
+/**
+ * hw_cfg_tos_prio - configure TOS priority
+ * @hw: The hardware instance.
+ * @tos: ToS value from 6-bit (bit7 ~ bit2) of ToS field, ranging from 0
+ * to 63.
+ * @prio: Priority to be assigned.
+ *
+ * This routine configures the TOS priority in the hardware.
+ * DiffServ Value 0 ~ 63 is mapped to Priority Queue Number 0 ~ 3.
+ * It is called by user functions. The hardware should be acquired first.
+ */
+static void hw_cfg_tos_prio(struct ksz_hw *hw, u8 tos, u8 prio)
+{
+ if ((tos >= DIFFSERV_ENTRIES) || (prio >= PRIO_QUEUES))
+ return;
+
+ hw->ksz_switch->diffserv[tos] = prio;
+ sw_set_tos_prio(hw, tos, prio);
+}
+
+/**
+ * sw_set_802_1p_prio - program switch 802.1p priority
+ * @hw: The hardware instance.
+ * @tag: The 802.1p tag priority value, ranging from 0 to 7.
+ * @prio: Priority to be assigned.
+ *
+ * This routine programs the 802.1p priority into the switch register.
+ */
+static void sw_set_802_1p_prio(struct ksz_hw *hw, u8 tag, u16 prio)
+{
+ int shift;
+ u16 data;
+ u16 mask = KS8842_PRIORITY_MASK;
+
+ shift = tag * KS8842_PRIORITY_SHIFT;
+ prio = prio << shift;
+ mask <<= shift;
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_6_OFFSET, &data);
+ data &= ~mask;
+ data |= prio;
+ HW_W16(hw, KS8842_SWITCH_CTRL_6_OFFSET, data);
+}
+
+/**
+ * sw_dis_802_1p - disable switch 802.1p priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine disables the 802.1p priority function of the switch.
+ */
+static void sw_dis_802_1p(struct ksz_hw *hw, int port)
+{
+ port_cfg_802_1p(hw, port, 0);
+}
+
+/**
+ * sw_ena_802_1p - enable switch 802.1p priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine enables the 802.1p priority function of the switch.
+ */
+static void sw_ena_802_1p(struct ksz_hw *hw, int port)
+{
+ u8 tag;
+
+ for (tag = 0; tag < PRIO_802_1P_ENTRIES; tag++)
+ sw_set_802_1p_prio(hw, tag, hw->ksz_switch->p_802_1p[tag]);
+ port_cfg_802_1p(hw, port, 1);
+}
+
+/**
+ * hw_cfg_802_1p_prio - configure 802.1p priority
+ * @hw: The hardware instance.
+ * @tag: The 802.1p tag priority value, ranging from 0 to 7.
+ * @prio: Priority to be assigned.
+ *
+ * This routine configures the 802.1p priority in the hardware.
+ * 802.1p Tag priority value 0 ~ 7 is mapped to Priority Queue Number 0 ~ 3.
+ * It is called by user functions. The hardware should be acquired first.
+ */
+static void hw_cfg_802_1p_prio(struct ksz_hw *hw, u8 tag, u8 prio)
+{
+ if ((tag >= PRIO_802_1P_ENTRIES) || (prio >= PRIO_QUEUES))
+ return;
+
+ hw->ksz_switch->p_802_1p[tag] = prio;
+ sw_set_802_1p_prio(hw, tag, prio);
+}
+
+/**
+ * sw_cfg_replace_null_vid -
+ * @hw: The hardware instance.
+ * @set: The flag to disable or enable.
+ *
+ */
+static void sw_cfg_replace_null_vid(struct ksz_hw *hw, int set)
+{
+ sw_cfg(hw, KS8842_SWITCH_CTRL_3_OFFSET, SWITCH_REPLACE_NULL_VID, set);
+}
+
+/**
+ * sw_cfg_replace_vid - enable switch 802.10 priority re-mapping
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @set: The flag to disable or enable.
+ *
+ * This routine enables the 802.1p priority re-mapping function of the switch.
+ * That allows 802.1p priority field to be replaced with the port's default
+ * tag's priority value if the ingress packet's 802.1p priority has a higher
+ * priority than port's default tag's priority.
+ */
+static void sw_cfg_replace_vid(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_replace_vid(hw, port, set);
+}
+
+/**
+ * sw_cfg_port_based - configure switch port based priority
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @prio: The priority to set.
+ *
+ * This routine configures the port based priority of the switch.
+ */
+static void sw_cfg_port_based(struct ksz_hw *hw, int port, u8 prio)
+{
+ u16 data;
+
+ if (prio > PORT_BASED_PRIORITY_BASE)
+ prio = PORT_BASED_PRIORITY_BASE;
+
+ hw->ksz_switch->port_cfg[port].port_prio = prio;
+
+ port_r16(hw, port, KS8842_PORT_CTRL_1_OFFSET, &data);
+ data &= ~PORT_BASED_PRIORITY_MASK;
+ data |= prio << PORT_BASED_PRIORITY_SHIFT;
+ port_w16(hw, port, KS8842_PORT_CTRL_1_OFFSET, data);
+}
+
+/**
+ * sw_dis_multi_queue - disable transmit multiple queues
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine disables the transmit multiple queues selection of the switch
+ * port. Only single transmit queue on the port.
+ */
+static void sw_dis_multi_queue(struct ksz_hw *hw, int port)
+{
+ port_cfg_prio(hw, port, 0);
+}
+
+/**
+ * sw_ena_multi_queue - enable transmit multiple queues
+ * @hw: The hardware instance.
+ * @port: The port index.
+ *
+ * This routine enables the transmit multiple queues selection of the switch
+ * port. The port transmit queue is split into four priority queues.
+ */
+static void sw_ena_multi_queue(struct ksz_hw *hw, int port)
+{
+ port_cfg_prio(hw, port, 1);
+}
+
+/**
+ * sw_init_prio - initialize switch priority
+ * @hw: The hardware instance.
+ *
+ * This routine initializes the switch QoS priority functions.
+ */
+static void sw_init_prio(struct ksz_hw *hw)
+{
+ int port;
+ int tos;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ /*
+ * Init all the 802.1p tag priority value to be assigned to different
+ * priority queue.
+ */
+ sw->p_802_1p[0] = 0;
+ sw->p_802_1p[1] = 0;
+ sw->p_802_1p[2] = 1;
+ sw->p_802_1p[3] = 1;
+ sw->p_802_1p[4] = 2;
+ sw->p_802_1p[5] = 2;
+ sw->p_802_1p[6] = 3;
+ sw->p_802_1p[7] = 3;
+
+ /*
+ * Init all the DiffServ priority value to be assigned to priority
+ * queue 0.
+ */
+ for (tos = 0; tos < DIFFSERV_ENTRIES; tos++)
+ sw->diffserv[tos] = 0;
+
+ /* All QoS functions disabled. */
+ for (port = 0; port < TOTAL_PORT_NUM; port++) {
+ sw_dis_multi_queue(hw, port);
+ sw_dis_diffserv(hw, port);
+ sw_dis_802_1p(hw, port);
+ sw_cfg_replace_vid(hw, port, 0);
+
+ sw->port_cfg[port].port_prio = 0;
+ sw_cfg_port_based(hw, port, sw->port_cfg[port].port_prio);
+ }
+ sw_cfg_replace_null_vid(hw, 0);
+}
+
+/**
+ * port_cfg_def_vid - configure port default VID
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @vid: The VID value.
+ *
+ * This routine configures the default VID of the port.
+ */
+static void port_cfg_def_vid(struct ksz_hw *hw, int port, u16 vid)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS8842_PORT_CTRL_VID_OFFSET;
+
+ HW_W16(hw, addr, vid);
+}
+
+/**
+ * port_get_def_vid - get port default VID.
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @vid: Buffer to store the VID.
+ *
+ * This routine retrieves the default VID of the port.
+ */
+static void port_get_def_vid(struct ksz_hw *hw, int port, u16 *vid)
+{
+ u32 addr;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS8842_PORT_CTRL_VID_OFFSET;
+
+ HW_R16(hw, addr, vid);
+}
+
+/**
+ * sw_dis_vlan - disable switch VLAN
+ * @hw: The hardware instance.
+ *
+ * This routine disables the VLAN function of the switch.
+ */
+static void sw_dis_vlan(struct ksz_hw *hw)
+{
+ sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_VLAN_ENABLE, 0);
+}
+
+/**
+ * sw_ena_vlan - enable switch VLAN
+ * @hw: The hardware instance.
+ *
+ * This routine enables the VLAN function of the switch.
+ */
+static void sw_ena_vlan(struct ksz_hw *hw)
+{
+ int entry;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ /* Create 16 VLAN entries in the VLAN table. */
+ for (entry = 0; entry < VLAN_TABLE_ENTRIES; entry++) {
+ if (sw->vlan_table[entry].vid)
+ sw_w_vlan_table(hw, entry,
+ sw->vlan_table[entry].vid,
+ sw->vlan_table[entry].fid,
+ sw->vlan_table[entry].member, 1);
+ else
+ sw_w_vlan_table(hw, entry, 0, 0, 0, 0);
+ }
+
+ /* Enable 802.1q VLAN mode. */
+ sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, UNICAST_VLAN_BOUNDARY, 1);
+ sw_cfg(hw, KS8842_SWITCH_CTRL_2_OFFSET, SWITCH_VLAN_ENABLE, 1);
+}
+
+/**
+ * sw_init_vlan - initialize switch VLAN
+ * @hw: The hardware instance.
+ *
+ * This routine initializes the VLAN function of the switch.
+ */
+static void sw_init_vlan(struct ksz_hw *hw)
+{
+ int port;
+ int entry;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ /* Read 16 VLAN entries from device's VLAN table. */
+ for (entry = 0; entry < VLAN_TABLE_ENTRIES; entry++) {
+ sw_r_vlan_table(hw, entry,
+ &sw->vlan_table[entry].vid,
+ &sw->vlan_table[entry].fid,
+ &sw->vlan_table[entry].member);
+ }
+
+ for (port = 0; port < TOTAL_PORT_NUM; port++) {
+ port_get_def_vid(hw, port, &sw->port_cfg[port].vid);
+ sw->port_cfg[port].member = PORT_MASK;
+ }
+}
+
+/**
+ * sw_cfg_def_vid - configure switch port default VID
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @vid: The VID value.
+ *
+ * This routine configures the default VID of the port.
+ */
+static void sw_cfg_def_vid(struct ksz_hw *hw, int port, u16 vid)
+{
+ hw->ksz_switch->port_cfg[port].vid = vid;
+
+ port_cfg_def_vid(hw, port, vid);
+}
+
+/**
+ * sw_cfg_port_base_vlan - configure port-based VLAN membership
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @member: The port-based VLAN membership.
+ *
+ * This routine configures the port-based VLAN membership of the port.
+ */
+static void sw_cfg_port_base_vlan(struct ksz_hw *hw, int port, u8 member)
+{
+ u32 addr;
+ u8 data;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS8842_PORT_CTRL_2_OFFSET;
+
+ HW_R8(hw, addr, &data);
+ data &= ~PORT_VLAN_MEMBERSHIP;
+ data |= (member & PORT_MASK);
+ HW_W8(hw, addr, data);
+
+ hw->ksz_switch->port_cfg[port].member = member;
+}
+
+/**
+ * sw_vlan_cfg_dis_non_vid - configure discard non VID
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @set: The flag to disable or enable.
+ *
+ * This routine configures Discard Non VID packets of the switch port.
+ * If enabled, the device will discard packets whose VLAN id does not match
+ * ingress port-based default VLAN id.
+ */
+static void sw_vlan_cfg_dis_non_vid(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_dis_non_vid(hw, port, set);
+}
+
+/**
+ * sw_vlan_cfg_in_filter - configure ingress VLAN filtering
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @set: The flag to disable or enable.
+ *
+ * This routine configures Ingress VLAN filtering of the switch port.
+ * If enabled, the device will discard packets whose VLAN id membership in the
+ * VLAN table bits [18:16] does not include the ingress port that received this
+ * packet.
+ */
+static void sw_vlan_cfg_in_filter(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_in_filter(hw, port, set);
+}
+
+/**
+ * sw_vlan_cfg_ins_tag - configure 802.1q tag insertion
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @set: The flag to disable or enable.
+ *
+ * This routine configures 802.1q Tag insertion to the switch port.
+ * If enabled, the device will insert 802.1q tag to the transmit packet on this
+ * port if received packet is an untagged packet. The device will not insert
+ * 802.1q tag if received packet is tagged packet.
+ */
+static void sw_vlan_cfg_ins_tag(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_ins_tag(hw, port, set);
+}
+
+/**
+ * sw_vlan_cfg_rmv_tag - configure 802.1q tag removal
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @set: The flag to disable or enable.
+ *
+ * This routine configures 802.1q Tag removal to the switch port.
+ * If enabled, the device will removed 802.1q tag to the transmit packet on
+ * this port if received packet is a tagged packet. The device will not remove
+ * 802.1q tag if received packet is untagged packet.
+ */
+static void sw_vlan_cfg_rmv_tag(struct ksz_hw *hw, int port, int set)
+{
+ port_cfg_rmv_tag(hw, port, set);
+}
+
+/**
+ * sw_get_addr - get the switch MAC address.
+ * @hw: The hardware instance.
+ * @mac_addr: Buffer to store the MAC address.
+ *
+ * This function retrieves the MAC address of the switch.
+ */
+static inline void sw_get_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+ int i;
+
+ for (i = 0; i < 6; i += 2) {
+ HW_R8(hw, KS8842_MAC_ADDR_0_OFFSET + i, &mac_addr[i]);
+ HW_R8(hw, KS8842_MAC_ADDR_1_OFFSET + i, &mac_addr[1 + i]);
+ }
+}
+
+/**
+ * sw_set_addr - configure switch MAC address
+ * @hw: The hardware instance.
+ * @mac_addr: The MAC address.
+ *
+ * This function configures the MAC address of the switch.
+ */
+static void sw_set_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+ int i;
+
+ for (i = 0; i < 6; i += 2) {
+ HW_W8(hw, KS8842_MAC_ADDR_0_OFFSET + i, mac_addr[i]);
+ HW_W8(hw, KS8842_MAC_ADDR_1_OFFSET + i, mac_addr[1 + i]);
+ }
+}
+
+/**
+ * sw_set_global_ctrl - set switch global control
+ * @hw: The hardware instance.
+ *
+ * This routine sets the global control of the switch function.
+ */
+static void sw_set_global_ctrl(struct ksz_hw *hw)
+{
+ u16 data;
+
+ /* Enable switch MII flow control. */
+ HW_R16(hw, KS8842_SWITCH_CTRL_3_OFFSET, &data);
+ data |= SWITCH_FLOW_CTRL;
+ HW_W16(hw, KS8842_SWITCH_CTRL_3_OFFSET, data);
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_1_OFFSET, &data);
+
+ /* Enable aggressive back off algorithm in half duplex mode. */
+ data |= SWITCH_AGGR_BACKOFF;
+
+ /* Enable automatic fast aging when link changed detected. */
+ data |= SWITCH_AGING_ENABLE;
+ data |= SWITCH_LINK_AUTO_AGING;
+
+ if (hw->overrides & FAST_AGING)
+ data |= SWITCH_FAST_AGING;
+ else
+ data &= ~SWITCH_FAST_AGING;
+ HW_W16(hw, KS8842_SWITCH_CTRL_1_OFFSET, data);
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_2_OFFSET, &data);
+
+ /* Enable no excessive collision drop. */
+ data |= NO_EXC_COLLISION_DROP;
+ HW_W16(hw, KS8842_SWITCH_CTRL_2_OFFSET, data);
+}
+
+enum {
+ STP_STATE_DISABLED = 0,
+ STP_STATE_LISTENING,
+ STP_STATE_LEARNING,
+ STP_STATE_FORWARDING,
+ STP_STATE_BLOCKED,
+ STP_STATE_SIMPLE
+};
+
+/**
+ * port_set_stp_state - configure port spanning tree state
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @state: The spanning tree state.
+ *
+ * This routine configures the spanning tree state of the port.
+ */
+static void port_set_stp_state(struct ksz_hw *hw, int port, int state)
+{
+ u16 data;
+
+ port_r16(hw, port, KS8842_PORT_CTRL_2_OFFSET, &data);
+ switch (state) {
+ case STP_STATE_DISABLED:
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+ data |= PORT_LEARN_DISABLE;
+ break;
+ case STP_STATE_LISTENING:
+/*
+ * No need to turn on transmit because of port direct mode.
+ * Turning on receive is required if static MAC table is not setup.
+ */
+ data &= ~PORT_TX_ENABLE;
+ data |= PORT_RX_ENABLE;
+ data |= PORT_LEARN_DISABLE;
+ break;
+ case STP_STATE_LEARNING:
+ data &= ~PORT_TX_ENABLE;
+ data |= PORT_RX_ENABLE;
+ data &= ~PORT_LEARN_DISABLE;
+ break;
+ case STP_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+ data &= ~PORT_LEARN_DISABLE;
+ break;
+ case STP_STATE_BLOCKED:
+/*
+ * Need to setup static MAC table with override to keep receiving BPDU
+ * messages. See sw_init_stp routine.
+ */
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE);
+ data |= PORT_LEARN_DISABLE;
+ break;
+ case STP_STATE_SIMPLE:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+ data |= PORT_LEARN_DISABLE;
+ break;
+ }
+ port_w16(hw, port, KS8842_PORT_CTRL_2_OFFSET, data);
+ hw->ksz_switch->port_cfg[port].stp_state = state;
+}
+
+#define STP_ENTRY 0
+#define BROADCAST_ENTRY 1
+#define BRIDGE_ADDR_ENTRY 2
+#define IPV6_ADDR_ENTRY 3
+
+/**
+ * sw_clr_sta_mac_table - clear static MAC table
+ * @hw: The hardware instance.
+ *
+ * This routine clears the static MAC table.
+ */
+static void sw_clr_sta_mac_table(struct ksz_hw *hw)
+{
+ struct ksz_mac_table *entry;
+ int i;
+
+ for (i = 0; i < STATIC_MAC_TABLE_ENTRIES; i++) {
+ entry = &hw->ksz_switch->mac_table[i];
+ sw_w_sta_mac_table(hw, i,
+ entry->mac_addr, entry->ports,
+ entry->override, 0,
+ entry->use_fid, entry->fid);
+ }
+}
+
+/**
+ * sw_init_stp - initialize switch spanning tree support
+ * @hw: The hardware instance.
+ *
+ * This routine initializes the spanning tree support of the switch.
+ */
+static void sw_init_stp(struct ksz_hw *hw)
+{
+ struct ksz_mac_table *entry;
+
+ entry = &hw->ksz_switch->mac_table[STP_ENTRY];
+ entry->mac_addr[0] = 0x01;
+ entry->mac_addr[1] = 0x80;
+ entry->mac_addr[2] = 0xC2;
+ entry->mac_addr[3] = 0x00;
+ entry->mac_addr[4] = 0x00;
+ entry->mac_addr[5] = 0x00;
+ entry->ports = HOST_MASK;
+ entry->override = 1;
+ entry->valid = 1;
+ sw_w_sta_mac_table(hw, STP_ENTRY,
+ entry->mac_addr, entry->ports,
+ entry->override, entry->valid,
+ entry->use_fid, entry->fid);
+}
+
+/**
+ * sw_block_addr - block certain packets from the host port
+ * @hw: The hardware instance.
+ *
+ * This routine blocks certain packets from reaching to the host port.
+ */
+static void sw_block_addr(struct ksz_hw *hw)
+{
+ struct ksz_mac_table *entry;
+ int i;
+
+ for (i = BROADCAST_ENTRY; i <= IPV6_ADDR_ENTRY; i++) {
+ entry = &hw->ksz_switch->mac_table[i];
+ entry->valid = 0;
+ sw_w_sta_mac_table(hw, i,
+ entry->mac_addr, entry->ports,
+ entry->override, entry->valid,
+ entry->use_fid, entry->fid);
+ }
+}
+
+#ifdef CONFIG_KSZ8842_STP
+/**
+ * sw_pass_addr - allow certain packets to the host port
+ * @hw: The hardware instance.
+ *
+ * This routine allows certain packets to reach the host port.
+ */
+static void sw_pass_addr(struct ksz_hw *hw)
+{
+ struct ksz_mac_table *entry;
+ struct ksz_switch *sw = hw->ksz_switch;
+ int i;
+
+ for (i = BROADCAST_ENTRY; i <= IPV6_ADDR_ENTRY; i++) {
+ entry = &sw->mac_table[i];
+ switch (i) {
+ case BROADCAST_ENTRY:
+ memset(entry->mac_addr, 0xFF, MAC_ADDR_LEN);
+ break;
+ case BRIDGE_ADDR_ENTRY:
+ memcpy(entry->mac_addr, sw->br_addr, MAC_ADDR_LEN);
+ break;
+ case IPV6_ADDR_ENTRY:
+ memcpy(entry->mac_addr, sw->br_addr, MAC_ADDR_LEN);
+ entry->mac_addr[0] = 0x33;
+ entry->mac_addr[1] = 0x33;
+ entry->mac_addr[2] = 0xFF;
+ break;
+ }
+ entry->ports = HOST_MASK;
+ entry->override = 1;
+ entry->valid = 1;
+ sw_w_sta_mac_table(hw, i,
+ entry->mac_addr, entry->ports,
+ entry->override, entry->valid,
+ entry->use_fid, entry->fid);
+ }
+}
+#endif
+
+#define PHY_LINK_SUPPORT \
+ (PHY_AUTO_NEG_ASYM_PAUSE | \
+ PHY_AUTO_NEG_SYM_PAUSE | \
+ PHY_AUTO_NEG_100BT4 | \
+ PHY_AUTO_NEG_100BTX_FD | \
+ PHY_AUTO_NEG_100BTX | \
+ PHY_AUTO_NEG_10BT_FD | \
+ PHY_AUTO_NEG_10BT)
+
+static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_w_phy_ctrl(struct ksz_hw *hw, int phy, u16 data)
+{
+ HW_W16(hw, phy + KS884X_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_r_phy_link_stat(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_STATUS_OFFSET, data);
+}
+
+static inline void hw_r_phy_auto_neg(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_AUTO_NEG_OFFSET, data);
+}
+
+static inline void hw_w_phy_auto_neg(struct ksz_hw *hw, int phy, u16 data)
+{
+ HW_W16(hw, phy + KS884X_PHY_AUTO_NEG_OFFSET, data);
+}
+
+static inline void hw_r_phy_rem_cap(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_REMOTE_CAP_OFFSET, data);
+}
+
+static inline void hw_r_phy_crossover(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_w_phy_crossover(struct ksz_hw *hw, int phy, u16 data)
+{
+ HW_W16(hw, phy + KS884X_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_r_phy_polarity(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_w_phy_polarity(struct ksz_hw *hw, int phy, u16 data)
+{
+ HW_W16(hw, phy + KS884X_PHY_PHY_CTRL_OFFSET, data);
+}
+
+static inline void hw_r_phy_link_md(struct ksz_hw *hw, int phy, u16 *data)
+{
+ HW_R16(hw, phy + KS884X_PHY_LINK_MD_OFFSET, data);
+}
+
+static inline void hw_w_phy_link_md(struct ksz_hw *hw, int phy, u16 data)
+{
+ HW_W16(hw, phy + KS884X_PHY_LINK_MD_OFFSET, data);
+}
+
+/**
+ * hw_r_phy - read data from PHY register
+ * @hw: The hardware instance.
+ * @port: Port to read.
+ * @reg: PHY register to read.
+ * @val: Buffer to store the read data.
+ *
+ * This routine reads data from the PHY register.
+ */
+static void hw_r_phy(struct ksz_hw *hw, int port, u16 reg, u16 *val)
+{
+ int phy;
+
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+ HW_R16(hw, phy, val);
+}
+
+/**
+ * port_w_phy - write data to PHY register
+ * @hw: The hardware instance.
+ * @port: Port to write.
+ * @reg: PHY register to write.
+ * @val: Word data to write.
+ *
+ * This routine writes data to the PHY register.
+ */
+static void hw_w_phy(struct ksz_hw *hw, int port, u16 reg, u16 val)
+{
+ int phy;
+
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL + reg;
+ HW_W16(hw, phy, val);
+}
+
+/*
+ * EEPROM access functions
+ */
+
+#define AT93C_CODE 0
+#define AT93C_WR_OFF 0x00
+#define AT93C_WR_ALL 0x10
+#define AT93C_ER_ALL 0x20
+#define AT93C_WR_ON 0x30
+
+#define AT93C_WRITE 1
+#define AT93C_READ 2
+#define AT93C_ERASE 3
+
+#define EEPROM_DELAY 4
+
+static inline void drop_gpio(struct ksz_hw *hw, u8 gpio)
+{
+ u16 data;
+
+ HW_R16(hw, KS884X_EEPROM_CTRL_OFFSET, &data);
+ data &= ~gpio;
+ HW_W16(hw, KS884X_EEPROM_CTRL_OFFSET, data);
+}
+
+static inline void raise_gpio(struct ksz_hw *hw, u8 gpio)
+{
+ u16 data;
+
+ HW_R16(hw, KS884X_EEPROM_CTRL_OFFSET, &data);
+ data |= gpio;
+ HW_W16(hw, KS884X_EEPROM_CTRL_OFFSET, data);
+}
+
+static inline u8 state_gpio(struct ksz_hw *hw, u8 gpio)
+{
+ u16 data;
+
+ HW_R16(hw, KS884X_EEPROM_CTRL_OFFSET, &data);
+ return (u8)(data & gpio);
+}
+
+static void eeprom_clk(struct ksz_hw *hw)
+{
+ raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+ delay_micro(EEPROM_DELAY);
+ drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+ delay_micro(EEPROM_DELAY);
+}
+
+static u16 spi_r(struct ksz_hw *hw)
+{
+ int i;
+ u16 temp = 0;
+
+ for (i = 15; i >= 0; i--) {
+ raise_gpio(hw, EEPROM_SERIAL_CLOCK);
+ delay_micro(EEPROM_DELAY);
+
+ temp |= (state_gpio(hw, EEPROM_DATA_IN)) ? 1 << i : 0;
+
+ drop_gpio(hw, EEPROM_SERIAL_CLOCK);
+ delay_micro(EEPROM_DELAY);
+ }
+ return temp;
+}
+
+static void spi_w(struct ksz_hw *hw, u16 data)
+{
+ int i;
+
+ for (i = 15; i >= 0; i--) {
+ (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+ drop_gpio(hw, EEPROM_DATA_OUT);
+ eeprom_clk(hw);
+ }
+}
+
+static void spi_reg(struct ksz_hw *hw, u8 data, u8 reg)
+{
+ int i;
+
+ /* Initial start bit */
+ raise_gpio(hw, EEPROM_DATA_OUT);
+ eeprom_clk(hw);
+
+ /* AT93C operation */
+ for (i = 1; i >= 0; i--) {
+ (data & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+ drop_gpio(hw, EEPROM_DATA_OUT);
+ eeprom_clk(hw);
+ }
+
+ /* Address location */
+ for (i = 5; i >= 0; i--) {
+ (reg & (0x01 << i)) ? raise_gpio(hw, EEPROM_DATA_OUT) :
+ drop_gpio(hw, EEPROM_DATA_OUT);
+ eeprom_clk(hw);
+ }
+}
+
+#define EEPROM_DATA_RESERVED 0
+#define EEPROM_DATA_MAC_ADDR_0 1
+#define EEPROM_DATA_MAC_ADDR_1 2
+#define EEPROM_DATA_MAC_ADDR_2 3
+#define EEPROM_DATA_SUBSYS_ID 4
+#define EEPROM_DATA_SUBSYS_VEN_ID 5
+#define EEPROM_DATA_PM_CAP 6
+
+/* User defined EEPROM data */
+#define EEPROM_DATA_OTHER_MAC_ADDR 9
+
+/**
+ * eeprom_read - read from AT93C46 EEPROM
+ * @hw: The hardware instance.
+ * @reg: The register offset.
+ *
+ * This function reads a word from the AT93C46 EEPROM.
+ *
+ * Return the data value.
+ */
+static u16 eeprom_read(struct ksz_hw *hw, u8 reg)
+{
+ u16 data;
+
+ raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+ spi_reg(hw, AT93C_READ, reg);
+ data = spi_r(hw);
+
+ drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+ return data;
+}
+
+/**
+ * eeprom_write - write to AT93C46 EEPROM
+ * @hw: The hardware instance.
+ * @reg: The register offset.
+ * @data: The data value.
+ *
+ * This procedure writes a word to the AT93C46 EEPROM.
+ */
+static void eeprom_write(struct ksz_hw *hw, u8 reg, u16 data)
+{
+ int timeout;
+
+ raise_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+
+ /* Enable write. */
+ spi_reg(hw, AT93C_CODE, AT93C_WR_ON);
+ drop_gpio(hw, EEPROM_CHIP_SELECT);
+ delay_micro(1);
+
+ /* Erase the register. */
+ raise_gpio(hw, EEPROM_CHIP_SELECT);
+ spi_reg(hw, AT93C_ERASE, reg);
+ drop_gpio(hw, EEPROM_CHIP_SELECT);
+ delay_micro(1);
+
+ /* Check operation complete. */
+ raise_gpio(hw, EEPROM_CHIP_SELECT);
+ timeout = 8;
+ delay_milli(2);
+ do {
+ delay_milli(1);
+ } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+ drop_gpio(hw, EEPROM_CHIP_SELECT);
+ delay_micro(1);
+
+ /* Write the register. */
+ raise_gpio(hw, EEPROM_CHIP_SELECT);
+ spi_reg(hw, AT93C_WRITE, reg);
+ spi_w(hw, data);
+ drop_gpio(hw, EEPROM_CHIP_SELECT);
+ delay_micro(1);
+
+ /* Check operation complete. */
+ raise_gpio(hw, EEPROM_CHIP_SELECT);
+ timeout = 8;
+ delay_milli(2);
+ do {
+ delay_milli(1);
+ } while (!state_gpio(hw, EEPROM_DATA_IN) && --timeout);
+ drop_gpio(hw, EEPROM_CHIP_SELECT);
+ delay_micro(1);
+
+ /* Disable write. */
+ raise_gpio(hw, EEPROM_CHIP_SELECT);
+ spi_reg(hw, AT93C_CODE, AT93C_WR_OFF);
+
+ drop_gpio(hw, EEPROM_ACCESS_ENABLE | EEPROM_CHIP_SELECT);
+}
+
+/*
+ * Link detection routines
+ */
+
+static u16 advertised_flow_ctrl(struct ksz_port *port, u16 ctrl)
+{
+ ctrl &= ~PORT_AUTO_NEG_SYM_PAUSE;
+ switch (port->flow_ctrl) {
+ case PHY_FLOW_CTRL:
+ ctrl |= PORT_AUTO_NEG_SYM_PAUSE;
+ break;
+ /* Not supported. */
+ case PHY_TX_ONLY:
+ case PHY_RX_ONLY:
+ default:
+ break;
+ }
+ return ctrl;
+}
+
+static void set_flow_ctrl(struct ksz_hw *hw, int rx, int tx)
+{
+ u32 rx_cfg;
+ u32 tx_cfg;
+
+ rx_cfg = hw->rx_cfg;
+ tx_cfg = hw->tx_cfg;
+ if (rx)
+ hw->rx_cfg |= DMA_RX_FLOW_ENABLE;
+ else
+ hw->rx_cfg &= ~DMA_RX_FLOW_ENABLE;
+ if (tx)
+ hw->tx_cfg |= DMA_TX_FLOW_ENABLE;
+ else
+ hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+ if (hw->enabled) {
+ if (rx_cfg != hw->rx_cfg)
+ HW_W32(hw, KS_DMA_RX_CTRL, hw->rx_cfg);
+ if (tx_cfg != hw->tx_cfg)
+ HW_W32(hw, KS_DMA_TX_CTRL, hw->tx_cfg);
+ }
+}
+
+static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port,
+ u16 local, u16 remote)
+{
+ int rx;
+ int tx;
+
+ if (hw->overrides & PAUSE_FLOW_CTRL)
+ return;
+
+ rx = tx = 0;
+ if (port->force_link)
+ rx = tx = 1;
+ if (remote & PHY_AUTO_NEG_SYM_PAUSE) {
+ if (local & PHY_AUTO_NEG_SYM_PAUSE) {
+ rx = tx = 1;
+ } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) &&
+ (local & PHY_AUTO_NEG_PAUSE) ==
+ PHY_AUTO_NEG_ASYM_PAUSE) {
+ tx = 1;
+ }
+ } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) {
+ if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE)
+ rx = 1;
+ }
+ if (!hw->ksz_switch)
+ set_flow_ctrl(hw, rx, tx);
+}
+
+static inline void port_cfg_change(struct ksz_hw *hw, struct ksz_port *port,
+ struct ksz_port_info *info, u16 link_status)
+{
+ if ((hw->features & HALF_DUPLEX_SIGNAL_BUG) &&
+ !(hw->overrides & PAUSE_FLOW_CTRL)) {
+ u32 cfg = hw->tx_cfg;
+
+ /* Disable flow control in the half duplex mode. */
+ if (1 == info->duplex)
+ hw->tx_cfg &= ~DMA_TX_FLOW_ENABLE;
+ if (hw->enabled && cfg != hw->tx_cfg)
+ HW_W32(hw, KS_DMA_TX_CTRL, hw->tx_cfg);
+ }
+}
+
+/**
+ * port_get_link_speed - get current link status
+ * @port: The port instance.
+ *
+ * This routine reads PHY registers to determine the current link status of the
+ * switch ports.
+ */
+static void port_get_link_speed(struct ksz_port *port)
+{
+ uint interrupt;
+ struct ksz_port_info *info;
+ struct ksz_port_info *linked = NULL;
+ struct ksz_hw *hw = port->hw;
+ u16 data;
+ u16 status;
+ u8 local;
+ u8 remote;
+ int i;
+ int p;
+ int change = 0;
+
+ interrupt = hw_block_intr(hw);
+
+ for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+ info = &hw->port_info[p];
+ port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+ port_r16(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+ /*
+ * Link status is changing all the time even when there is no
+ * cable connection!
+ */
+ remote = status & (PORT_AUTO_NEG_COMPLETE |
+ PORT_STATUS_LINK_GOOD);
+ local = (u8) data;
+
+ /* No change to status. */
+ if (local == info->advertised && remote == info->partner)
+ continue;
+
+ info->advertised = local;
+ info->partner = remote;
+ if (status & PORT_STATUS_LINK_GOOD) {
+
+ /* Remember the first linked port. */
+ if (!linked)
+ linked = info;
+
+ info->tx_rate = 10 * TX_RATE_UNIT;
+ if (status & PORT_STATUS_SPEED_100MBIT)
+ info->tx_rate = 100 * TX_RATE_UNIT;
+
+ info->duplex = 1;
+ if (status & PORT_STATUS_FULL_DUPLEX)
+ info->duplex = 2;
+
+ if (media_connected != info->state) {
+ hw_r_phy(hw, p, KS884X_PHY_AUTO_NEG_OFFSET,
+ &data);
+ hw_r_phy(hw, p, KS884X_PHY_REMOTE_CAP_OFFSET,
+ &status);
+ determine_flow_ctrl(hw, port, data, status);
+ if (hw->ksz_switch) {
+ port_cfg_back_pressure(hw, p,
+ (1 == info->duplex));
+ }
+ change |= 1 << i;
+ port_cfg_change(hw, port, info, status);
+ }
+ info->state = media_connected;
+ } else {
+ if (media_disconnected != info->state) {
+ change |= 1 << i;
+
+ /* Indicate the link just goes down. */
+ hw->port_mib[p].link_down = 1;
+ }
+ info->state = media_disconnected;
+ }
+ hw->port_mib[p].state = (u8) info->state;
+ }
+
+ if (linked && media_disconnected == port->linked->state)
+ port->linked = linked;
+
+ hw_restore_intr(hw, interrupt);
+}
+
+#define PHY_RESET_TIMEOUT 10
+
+/**
+ * port_set_link_speed - set port speed
+ * @port: The port instance.
+ *
+ * This routine sets the link speed of the switch ports.
+ */
+static void port_set_link_speed(struct ksz_port *port)
+{
+ struct ksz_port_info *info;
+ struct ksz_hw *hw = port->hw;
+ u16 data;
+ u16 cfg;
+ u8 status;
+ int i;
+ int p;
+
+ for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+ info = &hw->port_info[p];
+
+ port_r16(hw, p, KS884X_PORT_CTRL_4_OFFSET, &data);
+ port_r8(hw, p, KS884X_PORT_STATUS_OFFSET, &status);
+
+ cfg = 0;
+ if (status & PORT_STATUS_LINK_GOOD)
+ cfg = data;
+
+ data |= PORT_AUTO_NEG_ENABLE;
+ data = advertised_flow_ctrl(port, data);
+
+ data |= PORT_AUTO_NEG_100BTX_FD | PORT_AUTO_NEG_100BTX |
+ PORT_AUTO_NEG_10BT_FD | PORT_AUTO_NEG_10BT;
+
+ /* Check if manual configuration is specified by the user. */
+ if (port->speed || port->duplex) {
+ if (10 == port->speed)
+ data &= ~(PORT_AUTO_NEG_100BTX_FD |
+ PORT_AUTO_NEG_100BTX);
+ else if (100 == port->speed)
+ data &= ~(PORT_AUTO_NEG_10BT_FD |
+ PORT_AUTO_NEG_10BT);
+ if (1 == port->duplex)
+ data &= ~(PORT_AUTO_NEG_100BTX_FD |
+ PORT_AUTO_NEG_10BT_FD);
+ else if (2 == port->duplex)
+ data &= ~(PORT_AUTO_NEG_100BTX |
+ PORT_AUTO_NEG_10BT);
+ }
+ if (data != cfg) {
+ data |= PORT_AUTO_NEG_RESTART;
+ port_w16(hw, p, KS884X_PORT_CTRL_4_OFFSET, data);
+ }
+ }
+}
+
+/**
+ * port_force_link_speed - force port speed
+ * @port: The port instance.
+ *
+ * This routine forces the link speed of the switch ports.
+ */
+static void port_force_link_speed(struct ksz_port *port)
+{
+ struct ksz_hw *hw = port->hw;
+ u16 data;
+ int i;
+ int phy;
+ int p;
+
+ for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+ phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL;
+ hw_r_phy_ctrl(hw, phy, &data);
+
+ data &= ~PHY_AUTO_NEG_ENABLE;
+
+ if (10 == port->speed)
+ data &= ~PHY_SPEED_100MBIT;
+ else if (100 == port->speed)
+ data |= PHY_SPEED_100MBIT;
+ if (1 == port->duplex)
+ data &= ~PHY_FULL_DUPLEX;
+ else if (2 == port->duplex)
+ data |= PHY_FULL_DUPLEX;
+ hw_w_phy_ctrl(hw, phy, data);
+ }
+}
+
+static void port_set_power_saving(struct ksz_port *port, int enable)
+{
+ struct ksz_hw *hw = port->hw;
+ int i;
+ int p;
+
+ for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++)
+ port_cfg(hw, p,
+ KS884X_PORT_CTRL_4_OFFSET, PORT_POWER_DOWN, enable);
+}
+
+/*
+ * KSZ8841 power management functions
+ */
+
+/**
+ * hw_chk_wol_pme_status - check PMEN pin
+ * @hw: The hardware instance.
+ *
+ * This function is used to check PMEN pin is asserted.
+ *
+ * Return 1 if PMEN pin is asserted; otherwise, 0.
+ */
+static int hw_chk_wol_pme_status(struct ksz_hw *hw)
+{
+ u16 data;
+
+ HW_PCI_READ_WORD(hw, CPMC, &data);
+ return (data & POWER_PME_STATUS) == POWER_PME_STATUS;
+}
+
+/**
+ * hw_clr_wol_pme_status - clear PMEN pin
+ * @hw: The hardware instance.
+ *
+ * This routine is used to clear PME_Status to deassert PMEN pin.
+ */
+static void hw_clr_wol_pme_status(struct ksz_hw *hw)
+{
+ u16 data;
+
+ /* Clear PME_Status to deassert PMEN pin. */
+ HW_PCI_READ_WORD(hw, CPMC, &data);
+ data |= POWER_PME_STATUS;
+ HW_PCI_WRITE_WORD(hw, CPMC, data);
+}
+
+/**
+ * hw_cfg_wol_pme - enable or disable Wake-on-LAN
+ * @hw: The hardware instance.
+ * @set: The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable Wake-on-LAN.
+ */
+static void hw_cfg_wol_pme(struct ksz_hw *hw, int set)
+{
+ u16 data;
+
+ HW_PCI_READ_WORD(hw, CPMC, &data);
+ data &= ~POWER_STATE_MASK;
+ if (set)
+ data |= POWER_PME_ENABLE | POWER_STATE_D3;
+ else
+ data &= ~POWER_PME_ENABLE;
+ HW_PCI_WRITE_WORD(hw, CPMC, data);
+}
+
+/**
+ * hw_cfg_wol - configure Wake-on-LAN features
+ * @hw: The hardware instance.
+ * @frame: The pattern frame bit.
+ * @set: The flag indicating whether to enable or disable.
+ *
+ * This routine is used to enable or disable certain Wake-on-LAN features.
+ */
+static void hw_cfg_wol(struct ksz_hw *hw, u16 frame, int set)
+{
+ u16 data;
+
+ HW_R16(hw, KS8841_WOL_CTRL_OFFSET, &data);
+ if (set)
+ data |= frame;
+ else
+ data &= ~frame;
+ HW_W16(hw, KS8841_WOL_CTRL_OFFSET, data);
+}
+
+/**
+ * hw_set_wol_frame - program Wake-on-LAN pattern
+ * @hw: The hardware instance.
+ * @i: The frame index.
+ * @mask_size: The size of the mask.
+ * @mask: Mask to ignore certain bytes in the pattern.
+ * @frame_size: The size of the frame.
+ * @pattern: The frame data.
+ *
+ * This routine is used to program Wake-on-LAN pattern.
+ */
+static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size,
+ u8 *mask, uint frame_size, u8 *pattern)
+{
+ int bits;
+ int from;
+ int len;
+ int to;
+ u32 crc;
+ u8 data[64];
+ u8 val = 0;
+
+ if (frame_size > mask_size * 8)
+ frame_size = mask_size * 8;
+ if (frame_size > 64)
+ frame_size = 64;
+
+ i *= 0x10;
+ HW_W32(hw, KS8841_WOL_FRAME_BYTE0_OFFSET + i, 0);
+ HW_W32(hw, KS8841_WOL_FRAME_BYTE2_OFFSET + i, 0);
+
+ bits = len = from = to = 0;
+ do {
+ if (bits) {
+ if ((val & 1))
+ data[to++] = pattern[from];
+ val >>= 1;
+ ++from;
+ --bits;
+ } else {
+ val = mask[len];
+ HW_W8(hw, KS8841_WOL_FRAME_BYTE0_OFFSET + i + len, val);
+ ++len;
+ if (val)
+ bits = 8;
+ else
+ from += 8;
+ }
+ } while (from < (int) frame_size);
+ if (val) {
+ bits = mask[len - 1];
+ val <<= (from % 8);
+ bits &= ~val;
+ HW_W8(hw, KS8841_WOL_FRAME_BYTE0_OFFSET + i + len - 1, bits);
+ }
+ crc = ether_crc(to, data);
+ HW_W32(hw, KS8841_WOL_FRAME_CRC_OFFSET + i, crc);
+}
+
+/**
+ * hw_add_wol_arp - add ARP pattern
+ * @hw: The hardware instance.
+ * @ip_addr: The IPv4 address assigned to the device.
+ *
+ * This routine is used to add ARP pattern for waking up the host.
+ */
+static void hw_add_wol_arp(struct ksz_hw *hw, u8 *ip_addr)
+{
+ u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 };
+ u8 pattern[42] = {
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x08, 0x06,
+ 0x00, 0x01, 0x08, 0x00, 0x06, 0x04, 0x00, 0x01,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00 };
+
+ memcpy(&pattern[38], ip_addr, 4);
+ hw_set_wol_frame(hw, 3, 6, mask, 42, pattern);
+}
+
+/**
+ * hw_add_wol_bcast - add broadcast pattern
+ * @hw: The hardware instance.
+ *
+ * This routine is used to add broadcast pattern for waking up the host.
+ */
+static void hw_add_wol_bcast(struct ksz_hw *hw)
+{
+ u8 mask[] = { 0x3F };
+ u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+ hw_set_wol_frame(hw, 2, 1, mask, MAC_ADDR_LEN, pattern);
+}
+
+/**
+ * hw_add_wol_mcast - add multicast pattern
+ * @hw: The hardware instance.
+ *
+ * This routine is used to add multicast pattern for waking up the host.
+ *
+ * It is assumed the multicast packet is the ICMPv6 neighbor solicitation used
+ * by IPv6 ping command. Note that multicast packets are filtred through the
+ * multicast hash table, so not all multicast packets can wake up the host.
+ */
+static void hw_add_wol_mcast(struct ksz_hw *hw)
+{
+ u8 mask[] = { 0x3F };
+ u8 pattern[] = { 0x33, 0x33, 0xFF, 0x00, 0x00, 0x00 };
+
+ memcpy(&pattern[3], &hw->override_addr[3], 3);
+ hw_set_wol_frame(hw, 1, 1, mask, 6, pattern);
+}
+
+/**
+ * hw_add_wol_ucast - add unicast pattern
+ * @hw: The hardware instance.
+ *
+ * This routine is used to add unicast pattern to wakeup the host.
+ *
+ * It is assumed the unicast packet is directed to the device, as the hardware
+ * can only receive them in normal case.
+ */
+static void hw_add_wol_ucast(struct ksz_hw *hw)
+{
+ u8 mask[] = { 0x3F };
+
+ hw_set_wol_frame(hw, 0, 1, mask, MAC_ADDR_LEN, hw->override_addr);
+}
+
+/**
+ * hw_enable_wol - enable Wake-on-LAN
+ * @hw: The hardware instance.
+ * @wol_enable: The Wake-on-LAN settings.
+ * @net_addr: The IPv4 address assigned to the device.
+ *
+ * This routine is used to enable Wake-on-LAN depending on driver settings.
+ */
+static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, u8 *net_addr)
+{
+ hw_cfg_wol(hw, KS8841_WOL_MAGIC_ENABLE, (wol_enable & WAKE_MAGIC));
+ hw_cfg_wol(hw, KS8841_WOL_FRAME0_ENABLE, (wol_enable & WAKE_UCAST));
+ hw_add_wol_ucast(hw);
+ hw_cfg_wol(hw, KS8841_WOL_FRAME1_ENABLE, (wol_enable & WAKE_MCAST));
+ hw_add_wol_mcast(hw);
+ hw_cfg_wol(hw, KS8841_WOL_FRAME2_ENABLE, (wol_enable & WAKE_BCAST));
+ hw_cfg_wol(hw, KS8841_WOL_FRAME3_ENABLE, (wol_enable & WAKE_ARP));
+ hw_add_wol_arp(hw, net_addr);
+}
+
+/**
+ * hw_init - check driver is correct for the hardware
+ * @hw: The hardware instance.
+ *
+ * This function checks the hardware is correct for this driver and sets the
+ * hardware up for proper initialization.
+ *
+ * Return number of ports or 0 if not right.
+ */
+static int hw_init(struct ksz_hw *hw)
+{
+ int rc = 0;
+ u16 data;
+ u16 revision;
+
+ /* Set bus speed to 125MHz. */
+ HW_W16(hw, KS884X_BUS_CTRL_OFFSET, BUS_SPEED_125_MHZ);
+
+ /* Check KSZ884x chip ID. */
+ HW_R16(hw, KS884X_CHIP_ID_OFFSET, &data);
+
+ revision = (data & KS884X_REVISION_MASK) >> KS884X_REVISION_SHIFT;
+ data &= KS884X_CHIP_ID_MASK_41;
+ if (REG_CHIP_ID_41 == data)
+ rc = 1;
+ else if (REG_CHIP_ID_42 == data)
+ rc = 2;
+ else
+ return 0;
+
+ /* Setup hardware features or bug workarounds. */
+ if (revision <= 1) {
+ hw->features |= SMALL_PACKET_TX_BUG;
+ if (1 == rc)
+ hw->features |= HALF_DUPLEX_SIGNAL_BUG;
+ hw->features |= IPV6_CSUM_GEN_BUG;
+ }
+ return rc;
+}
+
+/**
+ * hw_reset - reset the hardware
+ * @hw: The hardware instance.
+ *
+ * This routine resets the hardware.
+ */
+static void hw_reset(struct ksz_hw *hw)
+{
+ HW_W16(hw, KS884X_GLOBAL_CTRL_OFFSET, GLOBAL_SOFTWARE_RESET);
+
+ /* Wait for device to reset. */
+ delay_milli(10);
+
+ /* Write 0 to clear device reset. */
+ HW_W16(hw, KS884X_GLOBAL_CTRL_OFFSET, 0);
+}
+
+/**
+ * hw_setup - setup the hardware
+ * @hw: The hardware instance.
+ *
+ * This routine setup the hardware for proper operation.
+ */
+static void hw_setup(struct ksz_hw *hw)
+{
+ /* Setup transmit control. */
+ hw->tx_cfg = (DMA_TX_PAD_ENABLE | DMA_TX_CRC_ENABLE |
+ (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_TX_ENABLE);
+
+ /* Setup receive control. */
+ hw->rx_cfg = (DMA_RX_BROADCAST | DMA_RX_UNICAST |
+ (DMA_BURST_DEFAULT << DMA_BURST_SHIFT) | DMA_RX_ENABLE);
+ hw->rx_cfg |= KS884X_DMA_RX_MULTICAST;
+
+ /* Hardware cannot handle UDP packet in IP fragments. */
+ hw->rx_cfg |= (DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP);
+
+ if (hw->all_multi)
+ hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+ if (hw->promiscuous)
+ hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+
+#if SET_DEFAULT_LED
+ /* Change default LED mode. */
+ HW_R16(hw, KS8842_SWITCH_CTRL_5_OFFSET, ®_data);
+ reg_data &= ~LED_MODE;
+ reg_data |= SET_DEFAULT_LED;
+ HW_W16(hw, KS8842_SWITCH_CTRL_5_OFFSET, reg_data);
+#endif
+}
+
+/**
+ * hw_setup_intr - setup interrupt mask
+ * @hw: The hardware instance.
+ *
+ * This routine setup the interrupt mask for proper operation.
+ */
+static void hw_setup_intr(struct ksz_hw *hw)
+{
+ hw->intr_mask = KS884X_INT_MASK | KS884X_INT_RX_OVERRUN;
+}
+
+static void ksz_check_desc_num(struct ksz_desc_info *info)
+{
+#define MIN_DESC_SHIFT 2
+
+ int alloc = info->alloc;
+ int shift;
+
+ shift = 0;
+ while (!(alloc & 1)) {
+ shift++;
+ alloc >>= 1;
+ }
+ if (alloc != 1 || shift < MIN_DESC_SHIFT) {
+ printk(KERN_ALERT "Hardware descriptor numbers not right!\n");
+ while (alloc) {
+ shift++;
+ alloc >>= 1;
+ }
+ if (shift < MIN_DESC_SHIFT)
+ shift = MIN_DESC_SHIFT;
+ alloc = 1 << shift;
+ info->alloc = alloc;
+ }
+ info->mask = info->alloc - 1;
+}
+
+static void hw_init_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+ int i;
+ u32 phys = desc_info->ring_phys;
+ struct ksz_hw_desc *desc = desc_info->ring_virt;
+ struct ksz_desc *cur = desc_info->ring;
+ struct ksz_desc *previous = NULL;
+
+ for (i = 0; i < desc_info->alloc; i++) {
+ cur->phw = desc++;
+ phys += desc_info->size;
+ previous = cur++;
+ previous->phw->next = cpu_to_le32(phys);
+ }
+ previous->phw->next = cpu_to_le32(desc_info->ring_phys);
+ previous->sw.buf.rx.end_of_ring = 1;
+ previous->phw->buf.data = cpu_to_le32(previous->sw.buf.data);
+
+ desc_info->avail = desc_info->alloc;
+ desc_info->last = desc_info->next = 0;
+
+ desc_info->cur = desc_info->ring;
+}
+
+/**
+ * hw_set_desc_base - set descriptor base addresses
+ * @hw: The hardware instance.
+ * @tx_addr: The transmit descriptor base.
+ * @rx_addr: The receive descriptor base.
+ *
+ * This routine programs the descriptor base addresses after reset.
+ */
+static void hw_set_desc_base(struct ksz_hw *hw, u32 tx_addr, u32 rx_addr)
+{
+ /* Set base address of Tx/Rx descriptors. */
+ HW_W32(hw, KS_DMA_TX_ADDR, tx_addr);
+ HW_W32(hw, KS_DMA_RX_ADDR, rx_addr);
+}
+
+static void hw_reset_pkts(struct ksz_desc_info *info)
+{
+ info->cur = info->ring;
+ info->avail = info->alloc;
+ info->last = info->next = 0;
+}
+
+static inline void hw_resume_rx(struct ksz_hw *hw)
+{
+ HW_W32(hw, KS_DMA_RX_START, DMA_START);
+}
+
+/**
+ * hw_start_rx - start receiving
+ * @hw: The hardware instance.
+ *
+ * This routine starts the receive function of the hardware.
+ */
+static void hw_start_rx(struct ksz_hw *hw)
+{
+ HW_W32(hw, KS_DMA_RX_CTRL, hw->rx_cfg);
+
+ /* Notify when the receive stops. */
+ hw->intr_mask |= KS884X_INT_RX_STOPPED;
+
+ HW_W32(hw, KS_DMA_RX_START, DMA_START);
+ hw_ack_intr(hw, KS884X_INT_RX_STOPPED);
+ hw->rx_stop++;
+
+ /* Variable overflows. */
+ if (0 == hw->rx_stop)
+ hw->rx_stop = 2;
+}
+
+/*
+ * hw_stop_rx - stop receiving
+ * @hw: The hardware instance.
+ *
+ * This routine stops the receive function of the hardware.
+ */
+static void hw_stop_rx(struct ksz_hw *hw)
+{
+ hw->rx_stop = 0;
+ hw_turn_off_intr(hw, KS884X_INT_RX_STOPPED);
+ HW_W32(hw, KS_DMA_RX_CTRL, (hw->rx_cfg & ~DMA_RX_ENABLE));
+}
+
+/**
+ * hw_start_tx - start transmitting
+ * @hw: The hardware instance.
+ *
+ * This routine starts the transmit function of the hardware.
+ */
+static void hw_start_tx(struct ksz_hw *hw)
+{
+ HW_W32(hw, KS_DMA_TX_CTRL, hw->tx_cfg);
+}
+
+/**
+ * hw_stop_tx - stop transmitting
+ * @hw: The hardware instance.
+ *
+ * This routine stops the transmit function of the hardware.
+ */
+static void hw_stop_tx(struct ksz_hw *hw)
+{
+ HW_W32(hw, KS_DMA_TX_CTRL, (hw->tx_cfg & ~DMA_TX_ENABLE));
+}
+
+/**
+ * hw_disable - disable hardware
+ * @hw: The hardware instance.
+ *
+ * This routine disables the hardware.
+ */
+static void hw_disable(struct ksz_hw *hw)
+{
+ hw_stop_rx(hw);
+ hw_stop_tx(hw);
+ hw->enabled = 0;
+}
+
+/**
+ * hw_enable - enable hardware
+ * @hw: The hardware instance.
+ *
+ * This routine enables the hardware.
+ */
+static void hw_enable(struct ksz_hw *hw)
+{
+ hw_start_tx(hw);
+ hw_start_rx(hw);
+ hw->enabled = 1;
+}
+
+/**
+ * hw_alloc_pkt - allocate enough descriptors for transmission
+ * @hw: The hardware instance.
+ * @length: The length of the packet.
+ * @physical: Number of descriptors required.
+ *
+ * This function allocates descriptors for transmission.
+ *
+ * Return 0 if not successful; 1 for buffer copy; or number of descriptors.
+ */
+static int hw_alloc_pkt(struct ksz_hw *hw, int length, int physical)
+{
+ /* Always leave one descriptor free. */
+ if (hw->tx_desc_info.avail <= 1)
+ return 0;
+
+ /* Allocate a descriptor for transmission and mark it current. */
+ get_tx_pkt(&hw->tx_desc_info, &hw->tx_desc_info.cur);
+ hw->tx_desc_info.cur->sw.buf.tx.first_seg = 1;
+
+ /* Keep track of number of transmit descriptors used so far. */
+ ++hw->tx_int_cnt;
+ hw->tx_size += length;
+
+ /* Cannot hold on too much data. */
+ if (hw->tx_size >= MAX_TX_HELD_SIZE)
+ hw->tx_int_cnt = hw->tx_int_mask + 1;
+
+ if (physical > hw->tx_desc_info.avail)
+ return 1;
+
+ return hw->tx_desc_info.avail;
+}
+
+/**
+ * hw_send_pkt - mark packet for transmission
+ * @hw: The hardware instance.
+ *
+ * This routine marks the packet for transmission in PCI version.
+ */
+static void hw_send_pkt(struct ksz_hw *hw)
+{
+ struct ksz_desc *cur = hw->tx_desc_info.cur;
+
+ cur->sw.buf.tx.last_seg = 1;
+
+ /* Interrupt only after specified number of descriptors used. */
+ if (hw->tx_int_cnt > hw->tx_int_mask) {
+ cur->sw.buf.tx.intr = 1;
+ hw->tx_int_cnt = 0;
+ hw->tx_size = 0;
+ }
+
+ /* KSZ8842 supports port directed transmission. */
+ cur->sw.buf.tx.dest_port = hw->dst_ports;
+
+ release_desc(cur);
+
+ HW_W32(hw, KS_DMA_TX_START, 0);
+}
+
+static int empty_addr(u8 *addr)
+{
+ u32 *addr1 = (u32 *) addr;
+ u16 *addr2 = (u16 *) &addr[4];
+
+ return 0 == *addr1 && 0 == *addr2;
+}
+
+/**
+ * hw_set_addr - set MAC address
+ * @hw: The hardware instance.
+ *
+ * This routine programs the MAC address of the hardware when the address is
+ * overrided.
+ */
+static void hw_set_addr(struct ksz_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ HW_W8(hw, KS884X_ADDR_0_OFFSET + i,
+ hw->override_addr[MAC_ADDR_ORDER(i)]);
+
+ sw_set_addr(hw, hw->override_addr);
+}
+
+/**
+ * hw_read_addr - read MAC address
+ * @hw: The hardware instance.
+ *
+ * This routine retrieves the MAC address of the hardware.
+ */
+static void hw_read_addr(struct ksz_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ HW_R8(hw, KS884X_ADDR_0_OFFSET + i,
+ &hw->perm_addr[MAC_ADDR_ORDER(i)]);
+
+ if (!hw->mac_override) {
+ memcpy(hw->override_addr, hw->perm_addr, MAC_ADDR_LEN);
+ if (empty_addr(hw->override_addr)) {
+ memcpy(hw->perm_addr, DEFAULT_MAC_ADDRESS,
+ MAC_ADDR_LEN);
+ memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS,
+ MAC_ADDR_LEN);
+ hw->override_addr[5] += hw->id;
+ hw_set_addr(hw);
+ }
+ }
+}
+
+static void hw_ena_add_addr(struct ksz_hw *hw, int index, u8 *mac_addr)
+{
+ int i;
+ u32 mac_addr_lo;
+ u32 mac_addr_hi;
+
+ mac_addr_hi = 0;
+ for (i = 0; i < 2; i++) {
+ mac_addr_hi <<= 8;
+ mac_addr_hi |= mac_addr[i];
+ }
+ mac_addr_hi |= ADD_ADDR_ENABLE;
+ mac_addr_lo = 0;
+ for (i = 2; i < 6; i++) {
+ mac_addr_lo <<= 8;
+ mac_addr_lo |= mac_addr[i];
+ }
+ index *= ADD_ADDR_INCR;
+
+ HW_W32(hw, index + KS_ADD_ADDR_0_LO, mac_addr_lo);
+ HW_W32(hw, index + KS_ADD_ADDR_0_HI, mac_addr_hi);
+}
+
+static void hw_set_add_addr(struct ksz_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < ADDITIONAL_ENTRIES; i++) {
+ if (empty_addr(hw->address[i]))
+ HW_W32(hw, ADD_ADDR_INCR * i + KS_ADD_ADDR_0_HI, 0);
+ else
+ hw_ena_add_addr(hw, i, hw->address[i]);
+ }
+}
+
+static int hw_add_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+ int i;
+ int j = ADDITIONAL_ENTRIES;
+
+ if (!memcmp(hw->override_addr, mac_addr, MAC_ADDR_LEN))
+ return 0;
+ for (i = 0; i < hw->addr_list_size; i++) {
+ if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN))
+ return 0;
+ if (ADDITIONAL_ENTRIES == j && empty_addr(hw->address[i]))
+ j = i;
+ }
+ if (j < ADDITIONAL_ENTRIES) {
+ memcpy(hw->address[j], mac_addr, MAC_ADDR_LEN);
+ hw_ena_add_addr(hw, j, hw->address[j]);
+ return 0;
+ }
+ return -1;
+}
+
+static int hw_del_addr(struct ksz_hw *hw, u8 *mac_addr)
+{
+ int i;
+
+ for (i = 0; i < hw->addr_list_size; i++) {
+ if (!memcmp(hw->address[i], mac_addr, MAC_ADDR_LEN)) {
+ memset(hw->address[i], 0, MAC_ADDR_LEN);
+ HW_W32(hw, ADD_ADDR_INCR * i + KS_ADD_ADDR_0_HI, 0);
+ return 0;
+ }
+ }
+ return -1;
+}
+
+/**
+ * hw_clr_multicast - clear multicast addresses
+ * @hw: The hardware instance.
+ *
+ * This routine removes all multicast addresses set in the hardware.
+ */
+static void hw_clr_multicast(struct ksz_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < HW_MULTICAST_SIZE; i++) {
+ hw->multi_bits[i] = 0;
+
+ HW_W8(hw, KS884X_MULTICAST_0_OFFSET + i, 0);
+ }
+}
+
+/**
+ * hw_set_grp_addr - set multicast addresses
+ * @hw: The hardware instance.
+ *
+ * This routine programs multicast addresses for the hardware to accept those
+ * addresses.
+ */
+static void hw_set_grp_addr(struct ksz_hw *hw)
+{
+ int i;
+ int index;
+ int position;
+ int value;
+
+ memset(hw->multi_bits, 0, sizeof(u8) * HW_MULTICAST_SIZE);
+
+ for (i = 0; i < hw->multi_list_size; i++) {
+ position = (ether_crc(6, hw->multi_list[i]) >> 26) & 0x3f;
+ index = position >> 3;
+ value = 1 << (position & 7);
+ hw->multi_bits[index] |= (u8) value;
+ }
+
+ for (i = 0; i < HW_MULTICAST_SIZE; i++)
+ HW_W8(hw, KS884X_MULTICAST_0_OFFSET + i, hw->multi_bits[i]);
+}
+
+/**
+ * hw_set_multicast - enable or disable all multicast receiving
+ * @hw: The hardware instance.
+ * @multicast: To turn on or off the all multicast feature.
+ *
+ * This routine enables/disables the hardware to accept all multicast packets.
+ */
+static void hw_set_multicast(struct ksz_hw *hw, u8 multicast)
+{
+ /* Stop receiving for reconfiguration. */
+ hw_stop_rx(hw);
+
+ if (multicast)
+ hw->rx_cfg |= DMA_RX_ALL_MULTICAST;
+ else
+ hw->rx_cfg &= ~DMA_RX_ALL_MULTICAST;
+
+ if (hw->enabled)
+ hw_start_rx(hw);
+}
+
+/**
+ * hw_set_promiscuous - enable or disable promiscuous receiving
+ * @hw: The hardware instance.
+ * @prom: To turn on or off the promiscuous feature.
+ *
+ * This routine enables/disables the hardware to accept all packets.
+ */
+static void hw_set_promiscuous(struct ksz_hw *hw, u8 prom)
+{
+ /* Stop receiving for reconfiguration. */
+ hw_stop_rx(hw);
+
+ if (prom)
+ hw->rx_cfg |= DMA_RX_PROMISCUOUS;
+ else
+ hw->rx_cfg &= ~DMA_RX_PROMISCUOUS;
+
+ if (hw->enabled)
+ hw_start_rx(hw);
+}
+
+/**
+ * sw_enable - enable the switch
+ * @hw: The hardware instance.
+ * @enable: The flag to enable or disable the switch
+ *
+ * This routine is used to enable/disable the switch in KSZ8842.
+ */
+static void sw_enable(struct ksz_hw *hw, int enable)
+{
+ int port;
+
+ for (port = 0; port < SWITCH_PORT_NUM; port++) {
+ if (hw->dev_count > 1) {
+ /* Set port-base vlan membership with host port. */
+ sw_cfg_port_base_vlan(hw, port,
+ HOST_MASK | (1 << port));
+ port_set_stp_state(hw, port, STP_STATE_DISABLED);
+ } else {
+ sw_cfg_port_base_vlan(hw, port, PORT_MASK);
+ port_set_stp_state(hw, port, STP_STATE_FORWARDING);
+ }
+ }
+ if (hw->dev_count > 1)
+ port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+ else
+ port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_FORWARDING);
+
+ if (enable)
+ enable = KS8842_START;
+ HW_W16(hw, KS884X_CHIP_ID_OFFSET, enable);
+}
+
+/**
+ * sw_setup - setup the switch
+ * @hw: The hardware instance.
+ *
+ * This routine setup the hardware switch engine for default operation.
+ */
+static void sw_setup(struct ksz_hw *hw)
+{
+ int port;
+
+ sw_set_global_ctrl(hw);
+
+ /* Enable switch broadcast storm protection at 10% percent rate. */
+ sw_init_broad_storm(hw);
+ hw_cfg_broad_storm(hw, BROADCAST_STORM_PROTECTION_RATE);
+ for (port = 0; port < SWITCH_PORT_NUM; port++)
+ sw_ena_broad_storm(hw, port);
+
+ sw_init_prio(hw);
+
+ sw_init_mirror(hw);
+
+ sw_init_prio_rate(hw);
+
+ sw_init_vlan(hw);
+
+ if (hw->features & STP_SUPPORT)
+ sw_init_stp(hw);
+ if (!sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_TX_FLOW_CTRL | SWITCH_RX_FLOW_CTRL))
+ hw->overrides |= PAUSE_FLOW_CTRL;
+ sw_enable(hw, 1);
+}
+
+/*
+ * Micrel LinkMD routines
+ */
+
+enum {
+ CABLE_UNKNOWN,
+ CABLE_GOOD,
+ CABLE_CROSSED,
+ CABLE_REVERSED,
+ CABLE_CROSSED_REVERSED,
+ CABLE_OPEN,
+ CABLE_SHORT
+};
+
+#define STATUS_FULL_DUPLEX 0x01
+#define STATUS_CROSSOVER 0x02
+#define STATUS_REVERSED 0x04
+
+#define LINK_10MBPS_FULL 0x00000001
+#define LINK_10MBPS_HALF 0x00000002
+#define LINK_100MBPS_FULL 0x00000004
+#define LINK_100MBPS_HALF 0x00000008
+#define LINK_1GBPS_FULL 0x00000010
+#define LINK_1GBPS_HALF 0x00000020
+#define LINK_10GBPS_FULL 0x00000040
+#define LINK_10GBPS_HALF 0x00000080
+#define LINK_SYM_PAUSE 0x00000100
+#define LINK_ASYM_PAUSE 0x00000200
+
+#define LINK_AUTO_MDIX 0x00010000
+#define LINK_MDIX 0x00020000
+#define LINK_AUTO_POLARITY 0x00040000
+
+#define CABLE_LEN_MAXIMUM 15000
+#define CABLE_LEN_MULTIPLIER 41
+
+/**
+ * hw_get_cable_status -
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @buf: Buffer to store the cable status.
+ *
+ * This routine is used to get the cable status.
+ */
+static void hw_get_cable_status(struct ksz_hw *hw, int port, void *buf)
+{
+ u32 *result = buf;
+ u16 crossover;
+ u16 ctrl;
+ u16 data;
+ u32 length[5];
+ u32 status[5];
+ int i;
+ int phy;
+ int timeout;
+
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL;
+ hw_r_phy_link_stat(hw, phy, &data);
+ status[4] = CABLE_UNKNOWN;
+ if (data & PHY_LINK_STATUS) {
+ int stat = 0;
+
+ status[4] = CABLE_GOOD;
+ length[4] = 1;
+ status[0] = CABLE_GOOD;
+ length[0] = 1;
+ status[1] = CABLE_GOOD;
+ length[1] = 1;
+
+ phy = KS884X_PHY_SPECIAL_OFFSET + port * PHY_SPECIAL_INTERVAL;
+ hw_r_phy_polarity(hw, phy, &data);
+ if (data & PHY_STAT_MDIX)
+ stat |= STATUS_CROSSOVER;
+ if (data & PHY_STAT_REVERSED_POLARITY)
+ stat |= STATUS_REVERSED;
+ if ((stat & (STATUS_CROSSOVER | STATUS_REVERSED)) ==
+ (STATUS_CROSSOVER | STATUS_REVERSED))
+ status[4] = CABLE_CROSSED_REVERSED;
+ else if ((stat & STATUS_CROSSOVER) == STATUS_CROSSOVER)
+ status[4] = CABLE_CROSSED;
+ else if ((stat & STATUS_REVERSED) == STATUS_REVERSED)
+ status[4] = CABLE_REVERSED;
+ goto get_cable_status_done;
+ }
+
+ /* Put in 10 Mbps mode. */
+ hw_r_phy_ctrl(hw, phy, &ctrl);
+ data = ctrl;
+ data &= ~(PHY_AUTO_NEG_ENABLE | PHY_SPEED_100MBIT | PHY_FULL_DUPLEX);
+
+ crossover = data;
+
+ for (i = 0; i < 2; i++) {
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL;
+ data = crossover;
+
+ /* Disable auto MDIX. */
+ data |= PHY_AUTO_MDIX_DISABLE;
+ if (0 == i)
+ data &= ~PHY_FORCE_MDIX;
+ else
+ data |= PHY_FORCE_MDIX;
+
+ /* Disable transmitter. */
+ data |= PHY_TRANSMIT_DISABLE;
+ hw_w_phy_ctrl(hw, phy, data);
+
+ /* Wait at most 1 second.*/
+ delay_milli(100);
+
+ /* Enable transmitter. */
+ data &= ~PHY_TRANSMIT_DISABLE;
+ hw_w_phy_ctrl(hw, phy, data);
+
+ /* Start cable diagnostic test. */
+ phy = KS884X_PHY_SPECIAL_OFFSET + port * PHY_SPECIAL_INTERVAL;
+ hw_r_phy_link_md(hw, phy, &data);
+ data |= PHY_START_CABLE_DIAG;
+ hw_w_phy_link_md(hw, phy, data);
+ timeout = PHY_RESET_TIMEOUT;
+ do {
+ if (!--timeout)
+ break;
+ delay_milli(10);
+ hw_r_phy_link_md(hw, phy, &data);
+ } while ((data & PHY_START_CABLE_DIAG));
+
+ length[i] = 0;
+ status[i] = CABLE_UNKNOWN;
+
+ if (!(data & PHY_START_CABLE_DIAG)) {
+ length[i] = (data & PHY_CABLE_FAULT_COUNTER) *
+ CABLE_LEN_MULTIPLIER;
+ data &= PHY_CABLE_DIAG_RESULT;
+ switch (data) {
+ case PHY_CABLE_STAT_NORMAL:
+ status[i] = CABLE_GOOD;
+ length[i] = 1;
+ break;
+ case PHY_CABLE_STAT_OPEN:
+ status[i] = CABLE_OPEN;
+ break;
+ case PHY_CABLE_STAT_SHORT:
+ status[i] = CABLE_SHORT;
+ break;
+ }
+ }
+ }
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL;
+ hw_w_phy_ctrl(hw, phy, ctrl);
+ if (ctrl & PHY_AUTO_NEG_ENABLE) {
+ ctrl |= PHY_AUTO_NEG_RESTART;
+ hw_w_phy_ctrl(hw, phy, ctrl);
+ }
+
+ length[4] = length[0];
+ status[4] = status[0];
+ for (i = 1; i < 2; i++) {
+ if (CABLE_GOOD == status[4]) {
+ if (status[i] != CABLE_GOOD) {
+ status[4] = status[i];
+ length[4] = length[i];
+ break;
+ }
+ }
+ }
+
+get_cable_status_done:
+ /* Overall status */
+ *result++ = length[4];
+ *result++ = status[4];
+
+ /* Pair 1-2 */
+ *result++ = length[0];
+ *result++ = status[0];
+
+ /* Pair 3-6 */
+ *result++ = length[1];
+ *result++ = status[1];
+
+ /* Pair 4-5 */
+ *result++ = 0;
+ *result++ = CABLE_UNKNOWN;
+
+ /* Pair 7-8 */
+ *result++ = 0;
+ *result++ = CABLE_UNKNOWN;
+}
+
+/**
+ * hw_get_link_status - Get port link status
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @buf: Buffer to store the link status.
+ *
+ * This routine is used to get the link status.
+ */
+static void hw_get_link_status(struct ksz_hw *hw, int port, void *buf)
+{
+ u32 *result = buf;
+ uint status;
+ u16 capable;
+ u16 crossover;
+ u16 link;
+ u16 local;
+ u16 polarity;
+ u16 remote;
+ int phy;
+ u32 addr;
+
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL;
+ hw_r_phy_link_stat(hw, phy, &capable);
+
+ status = 0;
+ if (capable & PHY_LINK_STATUS)
+ status = 1;
+
+ /* Link status */
+ *result++ = status;
+
+ PORT_CTRL_ADDR(port, addr);
+ addr += KS884X_PORT_STATUS_OFFSET;
+ HW_R16(hw, addr, &link);
+ hw_r_phy_auto_neg(hw, phy, &local);
+ hw_r_phy_rem_cap(hw, phy, &remote);
+
+ hw_r_phy_crossover(hw, phy, &crossover);
+ phy = KS884X_PHY_SPECIAL_OFFSET + port * PHY_SPECIAL_INTERVAL;
+ hw_r_phy_polarity(hw, phy, &polarity);
+
+ status = 100000;
+ if (link & PORT_STATUS_SPEED_100MBIT)
+ status = 1000000;
+
+ /* Link speed */
+ *result++ = status;
+
+ status = 0;
+ if (link & PORT_STATUS_FULL_DUPLEX)
+ status |= STATUS_FULL_DUPLEX;
+
+ if (polarity & PHY_STAT_MDIX)
+ status |= STATUS_CROSSOVER;
+
+ if (polarity & PHY_STAT_REVERSED_POLARITY)
+ status |= STATUS_REVERSED;
+
+ /* Duplex mode with crossover and reversed polarity */
+ *result++ = status;
+
+ status = 0;
+ if (capable & PHY_100BTX_FD_CAPABLE)
+ status |= LINK_100MBPS_FULL;
+ if (capable & PHY_100BTX_CAPABLE)
+ status |= LINK_100MBPS_HALF;
+ if (capable & PHY_10BT_FD_CAPABLE)
+ status |= LINK_10MBPS_FULL;
+ if (capable & PHY_10BT_CAPABLE)
+ status |= LINK_10MBPS_HALF;
+
+ status |= LINK_SYM_PAUSE;
+
+ /* Capability */
+ *result++ = status;
+
+ status = 0;
+ if (local & PHY_AUTO_NEG_SYM_PAUSE)
+ status |= LINK_SYM_PAUSE;
+ if (local & PHY_AUTO_NEG_100BTX_FD)
+ status |= LINK_100MBPS_FULL;
+ if (local & PHY_AUTO_NEG_100BTX)
+ status |= LINK_100MBPS_HALF;
+ if (local & PHY_AUTO_NEG_10BT_FD)
+ status |= LINK_10MBPS_FULL;
+ if (local & PHY_AUTO_NEG_10BT)
+ status |= LINK_10MBPS_HALF;
+
+ if (!(crossover & PHY_AUTO_MDIX_DISABLE))
+ status |= LINK_AUTO_MDIX;
+ else if (crossover & PHY_FORCE_MDIX)
+ status |= LINK_MDIX;
+ status |= LINK_AUTO_POLARITY;
+
+ /* Auto-Negotiation advertisement */
+ *result++ = status;
+
+ status = 0;
+ if (remote & PHY_REMOTE_SYM_PAUSE)
+ status |= LINK_SYM_PAUSE;
+ if (remote & PHY_REMOTE_100BTX_FD)
+ status |= LINK_100MBPS_FULL;
+ if (remote & PHY_REMOTE_100BTX)
+ status |= LINK_100MBPS_HALF;
+ if (remote & PHY_REMOTE_10BT_FD)
+ status |= LINK_10MBPS_FULL;
+ if (remote & PHY_REMOTE_10BT)
+ status |= LINK_10MBPS_HALF;
+
+ /* Link parnter capabilities */
+ *result++ = status;
+}
+
+/**
+ * hw_set_capabilities - Set port capabilities
+ * @hw: The hardware instance.
+ * @port: The port index.
+ * @capab: A set of flags indicating different capabilities.
+ *
+ * This routine is used to set the link capabilities.
+ */
+static void hw_set_capabilities(struct ksz_hw *hw, int port, u32 capab)
+{
+ uint interrupt;
+ u16 data;
+ int phy;
+ int timeout = PHY_RESET_TIMEOUT;
+
+ interrupt = hw_block_intr(hw);
+ hw_disable(hw);
+
+ phy = KS884X_PHY_1_CTRL_OFFSET + port * PHY_CTRL_INTERVAL;
+ hw_r_phy_auto_neg(hw, phy, &data);
+
+ if (capab & LINK_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ else
+ data &= ~PHY_AUTO_NEG_SYM_PAUSE;
+ if (capab & LINK_100MBPS_FULL)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ else
+ data &= ~PHY_AUTO_NEG_100BTX_FD;
+ if (capab & LINK_100MBPS_HALF)
+ data |= PHY_AUTO_NEG_100BTX;
+ else
+ data &= ~PHY_AUTO_NEG_100BTX;
+ if (capab & LINK_10MBPS_FULL)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ else
+ data &= ~PHY_AUTO_NEG_10BT_FD;
+ if (capab & LINK_10MBPS_HALF)
+ data |= PHY_AUTO_NEG_10BT;
+ else
+ data &= ~PHY_AUTO_NEG_10BT;
+ hw_w_phy_auto_neg(hw, phy, data);
+
+ hw_r_phy_crossover(hw, phy, &data);
+ if (capab & LINK_AUTO_MDIX)
+ data &= ~(PHY_AUTO_MDIX_DISABLE | PHY_FORCE_MDIX);
+ else {
+ data |= PHY_AUTO_MDIX_DISABLE;
+ if (capab & LINK_MDIX)
+ data |= PHY_FORCE_MDIX;
+ else
+ data &= ~PHY_FORCE_MDIX;
+ }
+ hw_w_phy_crossover(hw, phy, data);
+
+ hw_r_phy_ctrl(hw, phy, &data);
+ data |= PHY_AUTO_NEG_RESTART;
+ hw_w_phy_ctrl(hw, phy, data);
+
+ /* Wait for auto negotiation to complete. */
+ delay_milli(1500);
+ hw_r_phy_link_stat(hw, phy, &data);
+ while (!(data & PHY_LINK_STATUS)) {
+ if (!--timeout)
+ break;
+ delay_milli(100);
+ hw_r_phy_link_stat(hw, phy, &data);
+ }
+
+ hw_enable(hw);
+ hw_restore_intr(hw, interrupt);
+}
+
+/**
+ * ksz_start_timer - start kernel timer
+ * @info: Kernel timer information.
+ * @time: The time tick.
+ *
+ * This routine starts the kernel timer after the specified time tick.
+ */
+static void ksz_start_timer(struct ksz_timer_info *info, int time)
+{
+ info->cnt = 0;
+ info->timer.expires = jiffies + time;
+ add_timer(&info->timer);
+
+ /* infinity */
+ info->max = -1;
+}
+
+/**
+ * ksz_stop_timer - stop kernel timer
+ * @info: Kernel timer information.
+ *
+ * This routine stops the kernel timer.
+ */
+static void ksz_stop_timer(struct ksz_timer_info *info)
+{
+ if (info->max) {
+ info->max = 0;
+ del_timer_sync(&info->timer);
+ }
+}
+
+static void ksz_init_timer(struct ksz_timer_info *info, int period,
+ void (*function)(unsigned long), void *data)
+{
+ info->max = 0;
+ info->period = period;
+ init_timer(&info->timer);
+ info->timer.function = function;
+ info->timer.data = (unsigned long) data;
+}
+
+static void ksz_update_timer(struct ksz_timer_info *info)
+{
+ ++info->cnt;
+ if (info->max > 0) {
+ if (info->cnt < info->max) {
+ info->timer.expires = jiffies + info->period;
+ add_timer(&info->timer);
+ } else
+ info->max = 0;
+ } else if (info->max < 0) {
+ info->timer.expires = jiffies + info->period;
+ add_timer(&info->timer);
+ }
+}
+
+/**
+ * ksz_alloc_soft_desc - allocate software descriptors
+ * @desc_info: Descriptor information structure.
+ * @transmit: Indication that descriptors are for transmit.
+ *
+ * This local function allocates software descriptors for manipulation in
+ * memory.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_soft_desc(struct ksz_desc_info *desc_info, int transmit)
+{
+ desc_info->ring = kmalloc(sizeof(struct ksz_desc) * desc_info->alloc,
+ GFP_KERNEL);
+ if (!desc_info->ring)
+ return 1;
+ memset((void *) desc_info->ring, 0,
+ sizeof(struct ksz_desc) * desc_info->alloc);
+ hw_init_desc(desc_info, transmit);
+ return 0;
+}
+
+/**
+ * ksz_alloc_desc - allocate hardware descriptors
+ * @adapter: Adapter information structure.
+ *
+ * This local function allocates hardware descriptors for receiving and
+ * transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_desc(struct dev_info *adapter)
+{
+ struct ksz_hw *hw = &adapter->hw;
+ int offset;
+
+ /* Allocate memory for RX & TX descriptors. */
+ adapter->desc_pool.alloc_size =
+ hw->rx_desc_info.size * hw->rx_desc_info.alloc +
+ hw->tx_desc_info.size * hw->tx_desc_info.alloc +
+ DESC_ALIGNMENT;
+
+ adapter->desc_pool.alloc_virt =
+ pci_alloc_consistent(
+ adapter->pdev, adapter->desc_pool.alloc_size,
+ &adapter->desc_pool.dma_addr);
+ if (adapter->desc_pool.alloc_virt == NULL) {
+ adapter->desc_pool.alloc_size = 0;
+ return 1;
+ }
+ memset(adapter->desc_pool.alloc_virt, 0, adapter->desc_pool.alloc_size);
+
+ /* Align to the next cache line boundary. */
+ offset = (((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT) ?
+ (DESC_ALIGNMENT -
+ ((ulong) adapter->desc_pool.alloc_virt % DESC_ALIGNMENT)) : 0);
+ adapter->desc_pool.virt = adapter->desc_pool.alloc_virt + offset;
+ adapter->desc_pool.phys = adapter->desc_pool.dma_addr + offset;
+
+ /* Allocate receive/transmit descriptors. */
+ hw->rx_desc_info.ring_virt = (struct ksz_hw_desc *)
+ adapter->desc_pool.virt;
+ hw->rx_desc_info.ring_phys = adapter->desc_pool.phys;
+ offset = hw->rx_desc_info.alloc * hw->rx_desc_info.size;
+ hw->tx_desc_info.ring_virt = (struct ksz_hw_desc *)
+ (adapter->desc_pool.virt + offset);
+ hw->tx_desc_info.ring_phys = adapter->desc_pool.phys + offset;
+
+ if (ksz_alloc_soft_desc(&hw->rx_desc_info, 0))
+ return 1;
+ if (ksz_alloc_soft_desc(&hw->tx_desc_info, 1))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * free_dma_buf - release DMA buffer resources
+ * @adapter: Adapter information structure.
+ *
+ * This routine is just a helper function to release the DMA buffer resources.
+ */
+static void free_dma_buf(struct dev_info *adapter, struct ksz_dma_buf *dma_buf,
+ int direction)
+{
+ pci_unmap_single(adapter->pdev, dma_buf->dma, dma_buf->len, direction);
+ dev_kfree_skb(dma_buf->skb);
+ dma_buf->skb = NULL;
+ dma_buf->dma = 0;
+}
+
+/**
+ * ksz_init_rx_buffers - initialize receive descriptors
+ * @adapter: Adapter information structure.
+ *
+ * This routine initializes DMA buffers for receiving.
+ */
+static void ksz_init_rx_buffers(struct dev_info *adapter)
+{
+ int i;
+ struct ksz_desc *desc;
+ struct ksz_dma_buf *dma_buf;
+ struct ksz_hw *hw = &adapter->hw;
+ struct ksz_desc_info *info = &hw->rx_desc_info;
+
+ for (i = 0; i < hw->rx_desc_info.alloc; i++) {
+ get_rx_pkt(info, &desc);
+
+ dma_buf = DMA_BUFFER(desc);
+ if (dma_buf->skb && dma_buf->len != adapter->mtu)
+ free_dma_buf(adapter, dma_buf, PCI_DMA_FROMDEVICE);
+ dma_buf->len = adapter->mtu;
+ if (!dma_buf->skb)
+ dma_buf->skb = alloc_skb(dma_buf->len, GFP_ATOMIC);
+ if (dma_buf->skb && !dma_buf->dma) {
+ dma_buf->skb->dev = adapter->dev;
+ dma_buf->dma = pci_map_single(
+ adapter->pdev,
+ skb_tail_pointer(dma_buf->skb),
+ dma_buf->len,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ /* Set descriptor. */
+ set_rx_buf(desc, dma_buf->dma);
+ set_rx_len(desc, dma_buf->len);
+ release_desc(desc);
+ }
+}
+
+/**
+ * ksz_alloc_mem - allocate memory for hardware descriptors
+ * @adapter: Adapter information structure.
+ *
+ * This function allocates memory for use by hardware descriptors for receiving
+ * and transmitting.
+ *
+ * Return 0 if successful.
+ */
+static int ksz_alloc_mem(struct dev_info *adapter)
+{
+ struct ksz_hw *hw = &adapter->hw;
+
+ /* Determine the number of receive and transmit descriptors. */
+ hw->rx_desc_info.alloc = NUM_OF_RX_DESC;
+ hw->tx_desc_info.alloc = NUM_OF_TX_DESC;
+
+ /* Determine how many descriptors to skip transmit interrupt. */
+ hw->tx_int_cnt = 0;
+ hw->tx_int_mask = NUM_OF_TX_DESC / 4;
+ if (hw->tx_int_mask > 8)
+ hw->tx_int_mask = 8;
+ while (hw->tx_int_mask) {
+ hw->tx_int_cnt++;
+ hw->tx_int_mask >>= 1;
+ }
+ if (hw->tx_int_cnt) {
+ hw->tx_int_mask = (1 << (hw->tx_int_cnt - 1)) - 1;
+ hw->tx_int_cnt = 0;
+ }
+
+ /* Determine the descriptor size. */
+ hw->rx_desc_info.size =
+ (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+ DESC_ALIGNMENT) * DESC_ALIGNMENT);
+ hw->tx_desc_info.size =
+ (((sizeof(struct ksz_hw_desc) + DESC_ALIGNMENT - 1) /
+ DESC_ALIGNMENT) * DESC_ALIGNMENT);
+ if (hw->rx_desc_info.size != sizeof(struct ksz_hw_desc))
+ printk(KERN_ALERT
+ "Hardware descriptor size not right!\n");
+ ksz_check_desc_num(&hw->rx_desc_info);
+ ksz_check_desc_num(&hw->tx_desc_info);
+
+ /* Allocate descriptors. */
+ if (ksz_alloc_desc(adapter))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * ksz_free_desc - free software and hardware descriptors
+ * @adapter: Adapter information structure.
+ *
+ * This local routine frees the software and hardware descriptors allocated by
+ * ksz_alloc_desc().
+ */
+static void ksz_free_desc(struct dev_info *adapter)
+{
+ struct ksz_hw *hw = &adapter->hw;
+
+ /* Reset descriptor. */
+ hw->rx_desc_info.ring_virt = NULL;
+ hw->tx_desc_info.ring_virt = NULL;
+ hw->rx_desc_info.ring_phys = 0;
+ hw->tx_desc_info.ring_phys = 0;
+
+ /* Free memory. */
+ if (adapter->desc_pool.alloc_virt)
+ pci_free_consistent(
+ adapter->pdev,
+ adapter->desc_pool.alloc_size,
+ adapter->desc_pool.alloc_virt,
+ adapter->desc_pool.dma_addr);
+
+ /* Reset resource pool. */
+ adapter->desc_pool.alloc_size = 0;
+ adapter->desc_pool.alloc_virt = NULL;
+
+ kfree(hw->rx_desc_info.ring);
+ hw->rx_desc_info.ring = NULL;
+ kfree(hw->tx_desc_info.ring);
+ hw->tx_desc_info.ring = NULL;
+}
+
+/**
+ * ksz_free_buffers - free buffers used in the descriptors
+ * @adapter: Adapter information structure.
+ * @desc_info: Descriptor information structure.
+ *
+ * This local routine frees buffers used in the DMA buffers.
+ */
+static void ksz_free_buffers(struct dev_info *adapter,
+ struct ksz_desc_info *desc_info, int direction)
+{
+ int i;
+ struct ksz_dma_buf *dma_buf;
+ struct ksz_desc *desc = desc_info->ring;
+
+ for (i = 0; i < desc_info->alloc; i++) {
+ dma_buf = DMA_BUFFER(desc);
+ if (dma_buf->skb)
+ free_dma_buf(adapter, dma_buf, direction);
+ desc++;
+ }
+}
+
+/**
+ * ksz_free_mem - free all resources used by descriptors
+ * @adapter: Adapter information structure.
+ *
+ * This local routine frees all the resources allocated by ksz_alloc_mem().
+ */
+static void ksz_free_mem(struct dev_info *adapter)
+{
+ /* Free transmit buffers. */
+ ksz_free_buffers(adapter, &adapter->hw.tx_desc_info,
+ PCI_DMA_TODEVICE);
+
+ /* Free receive buffers. */
+ ksz_free_buffers(adapter, &adapter->hw.rx_desc_info,
+ PCI_DMA_FROMDEVICE);
+
+ /* Free descriptors. */
+ ksz_free_desc(adapter);
+}
+
+static void get_mib_counters(struct ksz_hw *hw, int first, int cnt,
+ u64 *counter)
+{
+ int i;
+ int mib;
+ int port;
+ struct ksz_port_mib *port_mib;
+
+ memset(counter, 0, sizeof(u64) * TOTAL_PORT_COUNTER_NUM);
+ for (i = 0, port = first; i < cnt; i++, port++) {
+ port_mib = &hw->port_mib[port];
+ for (mib = port_mib->mib_start; mib < hw->mib_cnt; mib++)
+ counter[mib] += port_mib->counter[mib];
+ }
+}
+
+static int display_mib_counters(struct ksz_hw *hw, int first, int cnt,
+ char *buf)
+{
+ int mib;
+ int len = 0;
+ u64 counter[TOTAL_PORT_COUNTER_NUM];
+
+ get_mib_counters(hw, first, cnt, counter);
+ for (cnt = 0, mib = hw->port_mib[first].mib_start;
+ mib < hw->mib_cnt; cnt++, mib++) {
+ if (buf)
+ len += sprintf(buf + len, "%2x = %-10lu ", mib,
+ (unsigned long) counter[mib]);
+ else
+ printk(KERN_INFO "%2x = %-10lu ", mib,
+ (unsigned long) counter[mib]);
+ if ((cnt % 4) == 3) {
+ if (buf)
+ len += sprintf(buf + len, "\n");
+ else
+ printk(KERN_INFO "\n");
+ }
+ }
+ if ((cnt % 4) != 0) {
+ if (buf)
+ len += sprintf(buf + len, "\n");
+ else
+ printk(KERN_INFO "\n");
+ }
+ return len;
+}
+
+/**
+ * send_packet - send packet
+ * @skb: Socket buffer.
+ * @dev: Network device.
+ *
+ * This routine is used to send a packet out to the network.
+ */
+static void send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ksz_desc *desc;
+ struct ksz_desc *first;
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_desc_info *info = &hw->tx_desc_info;
+ struct ksz_dma_buf *dma_buf;
+ int len;
+ int last_frag = skb_shinfo(skb)->nr_frags;
+
+ /*
+ * KSZ8842 with multiple device interfaces needs to be told which port
+ * to send.
+ */
+ if (hw->dev_count > 1)
+ hw->dst_ports = 1 << priv->port.first_port;
+
+ /* Hardware will pad the length to 60. */
+ len = skb->len;
+
+ /* Remember the very first descriptor. */
+ first = info->cur;
+ desc = first;
+
+ dma_buf = DMA_BUFFER(desc);
+ if (last_frag) {
+ int frag;
+ skb_frag_t *this_frag;
+
+ dma_buf->len = skb->len - skb->data_len;
+
+ dma_buf->dma = pci_map_single(
+ hw_priv->pdev, skb->data, dma_buf->len,
+ PCI_DMA_TODEVICE);
+ set_tx_buf(desc, dma_buf->dma);
+ set_tx_len(desc, dma_buf->len);
+
+ frag = 0;
+ do {
+ this_frag = &skb_shinfo(skb)->frags[frag];
+
+ /* Get a new descriptor. */
+ get_tx_pkt(info, &desc);
+
+ /* Keep track of descriptors used so far. */
+ ++hw->tx_int_cnt;
+
+ dma_buf = DMA_BUFFER(desc);
+ dma_buf->len = this_frag->size;
+
+ dma_buf->dma = pci_map_single(
+ hw_priv->pdev,
+ page_address(this_frag->page) +
+ this_frag->page_offset,
+ dma_buf->len,
+ PCI_DMA_TODEVICE);
+ set_tx_buf(desc, dma_buf->dma);
+ set_tx_len(desc, dma_buf->len);
+
+ frag++;
+ if (frag == last_frag)
+ break;
+
+ /* Do not release the last descriptor here. */
+ release_desc(desc);
+ } while (1);
+
+ /* current points to the last descriptor. */
+ info->cur = desc;
+
+ /* Release the first descriptor. */
+ release_desc(first);
+ } else {
+ dma_buf->len = len;
+
+ dma_buf->dma = pci_map_single(
+ hw_priv->pdev, skb->data, dma_buf->len,
+ PCI_DMA_TODEVICE);
+ set_tx_buf(desc, dma_buf->dma);
+ set_tx_len(desc, dma_buf->len);
+ }
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ (desc)->sw.buf.tx.csum_gen_tcp = 1;
+ (desc)->sw.buf.tx.csum_gen_udp = 1;
+ }
+
+ /*
+ * The last descriptor holds the packet so that it can be returned to
+ * network subsystem after all descriptors are transmitted.
+ */
+ dma_buf->skb = skb;
+
+ hw_send_pkt(hw);
+
+ /* Update transmit statistics. */
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += len;
+}
+
+/**
+ * transmit_cleanup - clean up transmit descriptors
+ * @dev: Network device.
+ *
+ * This routine is called to clean up the transmitted buffers.
+ */
+static void transmit_cleanup(struct dev_info *hw_priv, int normal)
+{
+ int last;
+ union desc_stat status;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_desc_info *info = &hw->tx_desc_info;
+ struct ksz_desc *desc;
+ struct ksz_dma_buf *dma_buf;
+ struct net_device *dev = NULL;
+
+ spin_lock(&hw_priv->hwlock);
+ last = info->last;
+
+ while (info->avail < info->alloc) {
+ /* Get next descriptor which is not hardware owned. */
+ desc = &info->ring[last];
+ status.data = le32_to_cpu(desc->phw->ctrl.data);
+ if (status.tx.hw_owned) {
+ if (normal)
+ break;
+ else
+ reset_desc(desc, status);
+ }
+
+ dma_buf = DMA_BUFFER(desc);
+ pci_unmap_single(
+ hw_priv->pdev, dma_buf->dma, dma_buf->len,
+ PCI_DMA_TODEVICE);
+
+ /* This descriptor contains the last buffer in the packet. */
+ if (dma_buf->skb) {
+ dev = dma_buf->skb->dev;
+
+ /* Release the packet back to network subsystem. */
+ dev_kfree_skb_irq(dma_buf->skb);
+ dma_buf->skb = NULL;
+ }
+
+ /* Free the transmitted descriptor. */
+ last++;
+ last &= info->mask;
+ info->avail++;
+ }
+ info->last = last;
+ spin_unlock(&hw_priv->hwlock);
+
+ /* Notify the network subsystem that the packet has been sent. */
+ if (dev)
+ dev->trans_start = jiffies;
+}
+
+/**
+ * transmit_done - transmit done processing
+ * @dev: Network device.
+ *
+ * This routine is called when the transmit interrupt is triggered, indicating
+ * either a packet is sent successfully or there are transmit errors.
+ */
+static void tx_done(struct dev_info *hw_priv)
+{
+ struct ksz_hw *hw = &hw_priv->hw;
+ int port;
+
+ transmit_cleanup(hw_priv, 1);
+
+ for (port = 0; port < hw->dev_count; port++) {
+ struct net_device *dev = hw->port_info[port].pdev;
+
+ if (netif_running(dev) && netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+}
+
+static inline void copy_old_skb(struct sk_buff *old, struct sk_buff *skb)
+{
+ skb->dev = old->dev;
+ skb->protocol = old->protocol;
+ skb->ip_summed = old->ip_summed;
+ skb->csum = old->csum;
+ skb_set_network_header(skb, ETH_HLEN);
+
+ dev_kfree_skb(old);
+}
+
+/**
+ * netdev_tx - send out packet
+ * @skb: Socket buffer.
+ * @dev: Network device.
+ *
+ * This function is used by the upper network layer to send out a packet.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int left;
+ int num = 1;
+ int rc = 0;
+
+ if (hw->features & SMALL_PACKET_TX_BUG) {
+ struct sk_buff *org_skb = skb;
+
+ if (skb->len <= 48) {
+ if (skb_end_pointer(skb) - skb->data >= 50) {
+ memset(&skb->data[skb->len], 0, 50 - skb->len);
+ skb->len = 50;
+ } else {
+ skb = dev_alloc_skb(50);
+ if (!skb)
+ return NETDEV_TX_BUSY;
+ memcpy(skb->data, org_skb->data, org_skb->len);
+ memset(&skb->data[org_skb->len], 0,
+ 50 - org_skb->len);
+ skb->len = 50;
+ copy_old_skb(org_skb, skb);
+ }
+ }
+ }
+
+ spin_lock_irq(&hw_priv->hwlock);
+
+ num = skb_shinfo(skb)->nr_frags + 1;
+ left = hw_alloc_pkt(hw, skb->len, num);
+ if (left) {
+ if (left < num ||
+ ((hw->features & IPV6_CSUM_GEN_BUG) &&
+ (CHECKSUM_PARTIAL == skb->ip_summed) &&
+ (ETH_P_IPV6 == htons(skb->protocol)))) {
+ struct sk_buff *org_skb = skb;
+
+ skb = dev_alloc_skb(org_skb->len);
+ if (!skb)
+ return NETDEV_TX_BUSY;
+ skb_copy_and_csum_dev(org_skb, skb->data);
+ org_skb->ip_summed = 0;
+ skb->len = org_skb->len;
+ copy_old_skb(org_skb, skb);
+ }
+ send_packet(skb, dev);
+ if (left <= num)
+ netif_stop_queue(dev);
+ } else {
+ /* Stop the transmit queue until packet is allocated. */
+ netif_stop_queue(dev);
+ rc = NETDEV_TX_BUSY;
+ }
+
+ spin_unlock_irq(&hw_priv->hwlock);
+
+ return rc;
+}
+
+/**
+ * netdev_tx_timeout - transmit timeout processing
+ * @dev: Network device.
+ *
+ * This routine is called when the transmit timer expires. That indicates the
+ * hardware is not running correctly because transmit interrupts are not
+ * triggered to free up resources so that the transmit routine can continue
+ * sending out packets. The hardware is reset to correct the problem.
+ */
+static void netdev_tx_timeout(struct net_device *dev)
+{
+ static unsigned long last_reset;
+
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int port;
+
+ if (hw->dev_count > 1) {
+ /*
+ * Only reset the hardware if time between calls is long
+ * enough.
+ */
+ if (jiffies - last_reset <= dev->watchdog_timeo)
+ hw_priv = NULL;
+ }
+
+ last_reset = jiffies;
+ if (hw_priv) {
+ hw_dis_intr(hw);
+ hw_disable(hw);
+
+ transmit_cleanup(hw_priv, 0);
+ hw_reset_pkts(&hw->rx_desc_info);
+ hw_reset_pkts(&hw->tx_desc_info);
+ ksz_init_rx_buffers(hw_priv);
+
+ hw_reset(hw);
+
+ hw_set_desc_base(hw,
+ hw->tx_desc_info.ring_phys,
+ hw->rx_desc_info.ring_phys);
+ hw_set_addr(hw);
+ if (hw->all_multi)
+ hw_set_multicast(hw, hw->all_multi);
+ else if (hw->multi_list_size)
+ hw_set_grp_addr(hw);
+
+ if (hw->dev_count > 1) {
+ hw_set_add_addr(hw);
+ for (port = 0; port < SWITCH_PORT_NUM; port++) {
+ struct net_device *port_dev;
+
+ port_set_stp_state(hw, port,
+ STP_STATE_DISABLED);
+
+ port_dev = hw->port_info[port].pdev;
+ if (netif_running(port_dev))
+ port_set_stp_state(hw, port,
+ STP_STATE_SIMPLE);
+ }
+ }
+
+ hw_enable(hw);
+ hw_ena_intr(hw);
+ }
+
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+}
+
+static inline void csum_verified(struct sk_buff *skb)
+{
+ unsigned short protocol;
+ struct iphdr *iph;
+
+ protocol = skb->protocol;
+ skb_reset_network_header(skb);
+ iph = (struct iphdr *) skb_network_header(skb);
+ if (protocol == htons(ETH_P_8021Q)) {
+ protocol = iph->tot_len;
+ skb_set_network_header(skb, VLAN_HLEN);
+ iph = (struct iphdr *) skb_network_header(skb);
+ }
+ if (protocol == htons(ETH_P_IP)) {
+ if (iph->protocol == IPPROTO_TCP)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+}
+
+static inline int rx_proc(struct net_device *dev, struct ksz_hw* hw,
+ struct ksz_desc *desc, union desc_stat status)
+{
+ int packet_len;
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_dma_buf *dma_buf;
+ struct sk_buff *skb;
+ int rx_status;
+
+ /* Received length includes 4-byte CRC. */
+ packet_len = status.rx.frame_len - 4;
+
+ dma_buf = DMA_BUFFER(desc);
+ pci_dma_sync_single_for_cpu(
+ hw_priv->pdev, dma_buf->dma, packet_len + 4,
+ PCI_DMA_FROMDEVICE);
+
+ do {
+ /* skb->data != skb->head */
+ skb = dev_alloc_skb(packet_len + 2);
+ if (!skb) {
+ priv->stats.rx_dropped++;
+ return -ENOMEM;
+ }
+
+ /*
+ * Align socket buffer in 4-byte boundary for better
+ * performance.
+ */
+ skb_reserve(skb, 2);
+
+ memcpy(skb_put(skb, packet_len),
+ dma_buf->skb->data, packet_len);
+ } while (0);
+
+ skb->dev = dev;
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (hw->rx_cfg & (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP))
+ csum_verified(skb);
+
+ /* Update receive statistics. */
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += packet_len;
+
+ /* Notify upper layer for received packet. */
+ dev->last_rx = jiffies;
+
+ rx_status = netif_rx(skb);
+
+ return 0;
+}
+
+static int dev_rcv_packets(struct dev_info *hw_priv)
+{
+ int next;
+ union desc_stat status;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct net_device *dev = hw->port_info[0].pdev;
+ struct ksz_desc_info *info = &hw->rx_desc_info;
+ int left = info->alloc;
+ struct ksz_desc *desc;
+ int received = 0;
+
+ next = info->next;
+ while (left--) {
+ /* Get next descriptor which is not hardware owned. */
+ desc = &info->ring[next];
+ status.data = le32_to_cpu(desc->phw->ctrl.data);
+ if (status.rx.hw_owned)
+ break;
+
+ /* Status valid only when last descriptor bit is set. */
+ if (status.rx.last_desc && status.rx.first_desc) {
+ if (rx_proc(dev, hw, desc, status))
+ goto release_packet;
+ received++;
+ }
+
+release_packet:
+ release_desc(desc);
+ next++;
+ next &= info->mask;
+ }
+ info->next = next;
+
+ return received;
+}
+
+static int port_rcv_packets(struct dev_info *hw_priv)
+{
+ int next;
+ union desc_stat status;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct net_device *dev = hw->port_info[0].pdev;
+ struct ksz_desc_info *info = &hw->rx_desc_info;
+ int left = info->alloc;
+ struct ksz_desc *desc;
+ int received = 0;
+
+ next = info->next;
+ while (left--) {
+ /* Get next descriptor which is not hardware owned. */
+ desc = &info->ring[next];
+ status.data = le32_to_cpu(desc->phw->ctrl.data);
+ if (status.rx.hw_owned)
+ break;
+
+ if (hw->dev_count > 1) {
+ /* Get received port number. */
+ int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+ dev = hw->port_info[p].pdev;
+ if (!netif_running(dev))
+ goto release_packet;
+ }
+
+ /* Status valid only when last descriptor bit is set. */
+ if (status.rx.last_desc && status.rx.first_desc) {
+ if (rx_proc(dev, hw, desc, status))
+ goto release_packet;
+ received++;
+ }
+
+release_packet:
+ release_desc(desc);
+ next++;
+ next &= info->mask;
+ }
+ info->next = next;
+
+ return received;
+}
+
+static int dev_rcv_special(struct dev_info *hw_priv)
+{
+ int next;
+ union desc_stat status;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct net_device *dev = hw->port_info[0].pdev;
+ struct ksz_desc_info *info = &hw->rx_desc_info;
+ int left = info->alloc;
+ struct ksz_desc *desc;
+ int received = 0;
+
+ next = info->next;
+ while (left--) {
+ /* Get next descriptor which is not hardware owned. */
+ desc = &info->ring[next];
+ status.data = le32_to_cpu(desc->phw->ctrl.data);
+ if (status.rx.hw_owned)
+ break;
+
+ if (hw->dev_count > 1) {
+ /* Get received port number. */
+ int p = HW_TO_DEV_PORT(status.rx.src_port);
+
+ dev = hw->port_info[p].pdev;
+ if (!netif_running(dev))
+ goto release_packet;
+ }
+
+ /* Status valid only when last descriptor bit is set. */
+ if (status.rx.last_desc && status.rx.first_desc) {
+ /*
+ * Receive without error. With receive errors
+ * disabled, packets with receive errors will be
+ * dropped, so no need to check the error bit.
+ */
+ if (!status.rx.error || (status.data &
+ KS_DESC_RX_ERROR_COND) ==
+ KS_DESC_RX_ERROR_TOO_LONG) {
+ if (rx_proc(dev, hw, desc, status))
+ goto release_packet;
+ received++;
+ } else {
+ struct dev_priv *priv = netdev_priv(dev);
+
+ /* Update receive error statistics. */
+ priv->port.counter[OID_COUNTER_RCV_ERROR]++;
+ }
+ }
+
+release_packet:
+ release_desc(desc);
+ next++;
+ next &= info->mask;
+ }
+ info->next = next;
+
+ return received;
+}
+
+static void rx_proc_task(unsigned long data)
+{
+ struct dev_info *hw_priv = (struct dev_info *) data;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ if (!hw->enabled)
+ return;
+ if (unlikely(!hw_priv->dev_rcv(hw_priv))) {
+
+ /* In case receive process is suspended because of overrun. */
+ hw_resume_rx(hw);
+
+ /* tasklets are interruptible. */
+ spin_lock_irq(&hw_priv->hwlock);
+ hw_turn_on_intr(hw, KS884X_INT_RX_MASK);
+ spin_unlock_irq(&hw_priv->hwlock);
+ } else {
+ hw_ack_intr(hw, KS884X_INT_RX);
+ tasklet_schedule(&hw_priv->rx_tasklet);
+ }
+}
+
+static void tx_proc_task(unsigned long data)
+{
+ struct dev_info *hw_priv = (struct dev_info *) data;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ hw_ack_intr(hw, KS884X_INT_TX_MASK);
+
+ tx_done(hw_priv);
+
+ /* tasklets are interruptible. */
+ spin_lock_irq(&hw_priv->hwlock);
+ hw_turn_on_intr(hw, KS884X_INT_TX);
+ spin_unlock_irq(&hw_priv->hwlock);
+}
+
+static inline void handle_rx_stop(struct ksz_hw *hw)
+{
+ /* Receive just has been stopped. */
+ if (0 == hw->rx_stop)
+ hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+ else if (hw->rx_stop > 1) {
+ if (hw->enabled && (hw->rx_cfg & DMA_RX_ENABLE)) {
+ hw_start_rx(hw);
+ } else {
+ hw->intr_mask &= ~KS884X_INT_RX_STOPPED;
+ hw->rx_stop = 0;
+ }
+ } else
+ /* Receive just has been started. */
+ hw->rx_stop++;
+}
+
+/**
+ * netdev_intr - interrupt handling
+ * @irq: Interrupt number.
+ * @dev_id: Network device.
+ *
+ * This function is called by upper network layer to signal interrupt.
+ *
+ * Return IRQ_HANDLED if interrupt is handled.
+ */
+static irqreturn_t netdev_intr(int irq, void *dev_id)
+{
+ uint int_enable = 0;
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ hw_read_intr(hw, &int_enable);
+
+ /* Not our interrupt! */
+ if (!int_enable)
+ return IRQ_NONE;
+
+ do {
+ hw_ack_intr(hw, int_enable);
+ int_enable &= hw->intr_mask;
+
+ if (unlikely(int_enable & KS884X_INT_TX_MASK)) {
+ hw_dis_intr_bit(hw, KS884X_INT_TX_MASK);
+ tasklet_schedule(&hw_priv->tx_tasklet);
+ }
+
+ if (likely(int_enable & KS884X_INT_RX)) {
+ hw_dis_intr_bit(hw, KS884X_INT_RX);
+ tasklet_schedule(&hw_priv->rx_tasklet);
+ }
+
+ if (unlikely(int_enable & KS884X_INT_RX_OVERRUN)) {
+ priv->stats.rx_fifo_errors++;
+ hw_resume_rx(hw);
+ }
+
+ if (unlikely(int_enable & KS884X_INT_PHY)) {
+ struct ksz_port *port = &priv->port;
+
+ hw->features |= LINK_INT_WORKING;
+ port_get_link_speed(port);
+ }
+
+ if (unlikely(int_enable & KS884X_INT_RX_STOPPED)) {
+ handle_rx_stop(hw);
+ break;
+ }
+
+ if (unlikely(int_enable & KS884X_INT_TX_STOPPED)) {
+ u32 data;
+
+ hw->intr_mask &= ~KS884X_INT_TX_STOPPED;
+ printk(KERN_INFO "Tx stopped\n");
+ HW_R32(hw, KS_DMA_TX_CTRL, &data);
+ if (!(data & DMA_TX_ENABLE))
+ printk(KERN_INFO "Tx disabled\n");
+ break;
+ }
+ } while (0);
+
+ hw_ena_intr(hw);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Linux network device functions
+ */
+
+static unsigned long next_jiffies;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void netdev_netpoll(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+
+ hw_dis_intr_sync(&hw_priv->hw);
+ netdev_intr(dev->irq, dev);
+}
+#endif
+
+static void bridge_change(struct ksz_hw *hw)
+{
+ int port;
+ u8 member;
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ /* No ports in forwarding state. */
+ if (!sw->member) {
+ port_set_stp_state(hw, SWITCH_PORT_NUM, STP_STATE_SIMPLE);
+ sw_block_addr(hw);
+ }
+ for (port = 0; port < SWITCH_PORT_NUM; port++) {
+ if (STP_STATE_FORWARDING == sw->port_cfg[port].stp_state)
+ member = HOST_MASK | sw->member;
+ else
+ member = HOST_MASK | (1 << port);
+ if (member != sw->port_cfg[port].member)
+ sw_cfg_port_base_vlan(hw, port, member);
+ }
+}
+
+/**
+ * netdev_close - close network device
+ * @dev: Network device.
+ *
+ * This function process the close operation of network device. This is caused
+ * by the user command "ifconfig ethX down."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_close(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_port *port = &priv->port;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int pi;
+
+ netif_stop_queue(dev);
+
+ ksz_stop_timer(&priv->monitor_timer_info);
+
+ /* Need to shut the port manually in multiple device interfaces mode. */
+ if (hw->dev_count > 1) {
+ port_set_stp_state(hw, port->first_port, STP_STATE_DISABLED);
+
+ /* Port is closed. Need to change bridge setting. */
+ if (hw->features & STP_SUPPORT) {
+ pi = 1 << port->first_port;
+ if (hw->ksz_switch->member & pi) {
+ hw->ksz_switch->member &= ~pi;
+ bridge_change(hw);
+ }
+ }
+ }
+ if (port->first_port > 0)
+ hw_del_addr(hw, dev->dev_addr);
+ if (!hw_priv->wol_enable)
+ port_set_power_saving(port, true);
+
+ if (priv->multicast)
+ --hw->all_multi;
+ if (priv->promiscuous)
+ --hw->promiscuous;
+
+ hw_priv->opened--;
+ if (!(hw_priv->opened)) {
+ ksz_stop_timer(&hw_priv->mib_timer_info);
+ flush_work(&hw_priv->mib_read);
+
+ hw_dis_intr(hw);
+ hw_disable(hw);
+ hw_clr_multicast(hw);
+
+ /* Delay for receive task to stop scheduling itself. */
+ delay_milli(2000 / HZ);
+
+ tasklet_disable(&hw_priv->rx_tasklet);
+ tasklet_disable(&hw_priv->tx_tasklet);
+ free_irq(dev->irq, hw_priv->dev);
+
+ transmit_cleanup(hw_priv, 0);
+ hw_reset_pkts(&hw->rx_desc_info);
+ hw_reset_pkts(&hw->tx_desc_info);
+
+ /* Clean out static MAC table when the switch is shutdown. */
+ if (hw->features & STP_SUPPORT)
+ sw_clr_sta_mac_table(hw);
+ }
+
+ return 0;
+}
+
+static void hw_cfg_huge_frame(struct dev_info *hw_priv, struct ksz_hw *hw)
+{
+ if (hw->ksz_switch) {
+ u32 data;
+
+ HW_R16(hw, KS8842_SWITCH_CTRL_2_OFFSET, &data);
+ if (hw->features & RX_HUGE_FRAME)
+ data |= SWITCH_HUGE_PACKET;
+ else
+ data &= ~SWITCH_HUGE_PACKET;
+ HW_W16(hw, KS8842_SWITCH_CTRL_2_OFFSET, data);
+ }
+ if (hw->features & RX_HUGE_FRAME) {
+ hw->rx_cfg |= DMA_RX_ERROR;
+ hw_priv->dev_rcv = dev_rcv_special;
+ } else {
+ hw->rx_cfg &= ~DMA_RX_ERROR;
+ if (hw->dev_count > 1)
+ hw_priv->dev_rcv = port_rcv_packets;
+ else
+ hw_priv->dev_rcv = dev_rcv_packets;
+ }
+}
+
+static int prepare_hardware(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int rc = 0;
+
+ /* Remember the network device that requests interrupts. */
+ hw_priv->dev = dev;
+ rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
+ if (rc)
+ return rc;
+ tasklet_enable(&hw_priv->rx_tasklet);
+ tasklet_enable(&hw_priv->tx_tasklet);
+
+ hw->promiscuous = 0;
+ hw->all_multi = 0;
+ hw->multi_list_size = 0;
+
+ hw_reset(hw);
+
+ hw_set_desc_base(hw,
+ hw->tx_desc_info.ring_phys, hw->rx_desc_info.ring_phys);
+ hw_set_addr(hw);
+ hw_cfg_huge_frame(hw_priv, hw);
+ ksz_init_rx_buffers(hw_priv);
+ return 0;
+}
+
+/**
+ * netdev_open - open network device
+ * @dev: Network device.
+ *
+ * This function process the open operation of network device. This is caused
+ * by the user command "ifconfig ethX up."
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int netdev_open(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+ int i;
+ int p;
+ int rc = 0;
+
+ priv->multicast = 0;
+ priv->promiscuous = 0;
+
+ /* Reset device statistics. */
+ memset(&priv->stats, 0, sizeof(struct net_device_stats));
+ memset((void *) port->counter, 0,
+ (sizeof(u64) * OID_COUNTER_LAST));
+
+ if (!(hw_priv->opened)) {
+ rc = prepare_hardware(dev);
+ if (rc)
+ return rc;
+ for (i = 0; i < hw->mib_port_cnt; i++) {
+ if (next_jiffies < jiffies)
+ next_jiffies = jiffies + HZ * 2;
+ else
+ next_jiffies += HZ * 1;
+ hw_priv->counter[i].time = next_jiffies;
+ hw->port_mib[i].state = media_disconnected;
+ port_init_cnt(hw, i);
+ }
+ if (hw->ksz_switch)
+ hw->port_mib[HOST_PORT].state = media_connected;
+ else {
+ hw_add_wol_bcast(hw);
+ hw_cfg_wol_pme(hw, 0);
+ hw_clr_wol_pme_status(&hw_priv->hw);
+ }
+ }
+ port_set_power_saving(port, false);
+
+ for (i = 0, p = port->first_port; i < port->port_cnt; i++, p++) {
+ /*
+ * Initialize to invalid value so that link detection
+ * is done.
+ */
+ hw->port_info[p].partner = 0xFF;
+ hw->port_info[p].state = media_disconnected;
+ }
+
+ /* Need to open the port in multiple device interfaces mode. */
+ if (hw->dev_count > 1) {
+ port_set_stp_state(hw, port->first_port, STP_STATE_SIMPLE);
+ if (port->first_port > 0)
+ hw_add_addr(hw, dev->dev_addr);
+ }
+
+ port_get_link_speed(port);
+ if (port->force_link)
+ port_force_link_speed(port);
+ else
+ port_set_link_speed(port);
+
+ if (!(hw_priv->opened)) {
+ hw_setup_intr(hw);
+ hw_enable(hw);
+ hw_ena_intr(hw);
+
+ if (hw->mib_port_cnt)
+ ksz_start_timer(&hw_priv->mib_timer_info,
+ hw_priv->mib_timer_info.period);
+ }
+
+ hw_priv->opened++;
+
+ ksz_start_timer(&priv->monitor_timer_info,
+ priv->monitor_timer_info.period);
+
+ priv->media_state = port->linked->state;
+
+ if (media_connected == priv->media_state)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s link %s\n", dev->name,
+ (media_connected == priv->media_state ?
+ "on" : "off"));
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/* RX errors = rx_errors */
+/* RX dropped = rx_dropped */
+/* RX overruns = rx_fifo_errors */
+/* RX frame = rx_crc_errors + rx_frame_errors + rx_length_errors */
+/* TX errors = tx_errors */
+/* TX dropped = tx_dropped */
+/* TX overruns = tx_fifo_errors */
+/* TX carrier = tx_aborted_errors + tx_carrier_errors + tx_window_errors */
+/* collisions = collisions */
+
+/**
+ * netdev_query_statistics - query network device statistics
+ * @dev: Network device.
+ *
+ * This function returns the statistics of the network device. The device
+ * needs not be opened.
+ *
+ * Return network device statistics.
+ */
+static struct net_device_stats *netdev_query_statistics(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct ksz_port *port = &priv->port;
+ struct ksz_hw *hw = &priv->adapter->hw;
+ struct ksz_port_mib *mib;
+ int i;
+ int p;
+
+ priv->stats.rx_errors = port->counter[OID_COUNTER_RCV_ERROR];
+ priv->stats.tx_errors = port->counter[OID_COUNTER_XMIT_ERROR];
+
+ /* Reset to zero to add count later. */
+ priv->stats.multicast = 0;
+ priv->stats.collisions = 0;
+ priv->stats.rx_length_errors = 0;
+ priv->stats.rx_crc_errors = 0;
+ priv->stats.rx_frame_errors = 0;
+ priv->stats.tx_window_errors = 0;
+
+ for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+ mib = &hw->port_mib[p];
+
+ priv->stats.multicast += (unsigned long)
+ mib->counter[MIB_COUNTER_RX_MULTICAST];
+
+ priv->stats.collisions += (unsigned long)
+ mib->counter[MIB_COUNTER_TX_TOTAL_COLLISION];
+
+ priv->stats.rx_length_errors += (unsigned long)(
+ mib->counter[MIB_COUNTER_RX_UNDERSIZE] +
+ mib->counter[MIB_COUNTER_RX_FRAGMENT] +
+ mib->counter[MIB_COUNTER_RX_OVERSIZE] +
+ mib->counter[MIB_COUNTER_RX_JABBER]);
+ priv->stats.rx_crc_errors += (unsigned long)
+ mib->counter[MIB_COUNTER_RX_CRC_ERR];
+ priv->stats.rx_frame_errors += (unsigned long)(
+ mib->counter[MIB_COUNTER_RX_ALIGNMENT_ERR] +
+ mib->counter[MIB_COUNTER_RX_SYMBOL_ERR]);
+
+ priv->stats.tx_window_errors += (unsigned long)
+ mib->counter[MIB_COUNTER_TX_LATE_COLLISION];
+ }
+
+ return &priv->stats;
+}
+
+/**
+ * netdev_set_mac_address - set network device MAC address
+ * @dev: Network device.
+ * @addr: Buffer of MAC address.
+ *
+ * This function is used to set the MAC address of the network device.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct sockaddr *mac = addr;
+ uint interrupt;
+
+ if (priv->port.first_port > 0)
+ hw_del_addr(hw, dev->dev_addr);
+ else {
+ hw->mac_override = 1;
+ memcpy(hw->override_addr, mac->sa_data, MAC_ADDR_LEN);
+ }
+
+ memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN);
+
+ interrupt = hw_block_intr(hw);
+
+ if (priv->port.first_port > 0)
+ hw_add_addr(hw, dev->dev_addr);
+ else
+ hw_set_addr(hw);
+ hw_restore_intr(hw, interrupt);
+
+ return 0;
+}
+
+static void dev_set_promiscuous(struct net_device *dev, struct dev_priv *priv,
+ struct ksz_hw *hw, int promiscuous)
+{
+ if (promiscuous != priv->promiscuous) {
+ u8 prev_state = hw->promiscuous;
+
+ if (promiscuous)
+ ++hw->promiscuous;
+ else
+ --hw->promiscuous;
+ priv->promiscuous = promiscuous;
+
+ /* Turn on/off promiscuous mode. */
+ if (hw->promiscuous <= 1 && prev_state <= 1)
+ hw_set_promiscuous(hw, hw->promiscuous);
+
+ /*
+ * Port is not in promiscuous mode, meaning it is released
+ * from the bridge.
+ */
+ if ((hw->features & STP_SUPPORT) && !promiscuous &&
+ dev->br_port) {
+ struct ksz_switch *sw = hw->ksz_switch;
+ int port = priv->port.first_port;
+
+ port_set_stp_state(hw, port, STP_STATE_DISABLED);
+ port = 1 << port;
+ if (sw->member & port) {
+ sw->member &= ~port;
+ bridge_change(hw);
+ }
+ }
+ }
+}
+
+static void dev_set_multicast(struct dev_priv *priv, struct ksz_hw *hw,
+ int multicast)
+{
+ if (multicast != priv->multicast) {
+ u8 all_multi = hw->all_multi;
+
+ if (multicast)
+ ++hw->all_multi;
+ else
+ --hw->all_multi;
+ priv->multicast = multicast;
+
+ /* Turn on/off all multicast mode. */
+ if (hw->all_multi <= 1 && all_multi <= 1)
+ hw_set_multicast(hw, hw->all_multi);
+ }
+}
+
+/**
+ * netdev_set_rx_mode
+ * @dev: Network device.
+ *
+ * This routine is used to set multicast addresses or put the network device
+ * into promiscuous mode.
+ */
+static void netdev_set_rx_mode(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct dev_mc_list *mc_ptr;
+ int multicast = (dev->flags & IFF_ALLMULTI);
+
+ dev_set_promiscuous(dev, priv, hw, (dev->flags & IFF_PROMISC));
+
+ if (hw_priv->hw.dev_count > 1)
+ multicast |= (dev->flags & IFF_MULTICAST);
+ dev_set_multicast(priv, hw, multicast);
+
+ /* Cannot use different hashes in multiple device interfaces mode. */
+ if (hw_priv->hw.dev_count > 1)
+ return;
+
+ if ((dev->flags & IFF_MULTICAST) && dev->mc_count) {
+ int i = 0;
+
+ /* List too big to support so turn on all multicast mode. */
+ if (dev->mc_count > MAX_MULTICAST_LIST) {
+ if (MAX_MULTICAST_LIST != hw->multi_list_size) {
+ hw->multi_list_size = MAX_MULTICAST_LIST;
+ ++hw->all_multi;
+ hw_set_multicast(hw, hw->all_multi);
+ }
+ return;
+ }
+
+ for (mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+ if (!(*mc_ptr->dmi_addr & 1))
+ continue;
+ if (i >= MAX_MULTICAST_LIST)
+ break;
+ memcpy(hw->multi_list[i++], mc_ptr->dmi_addr,
+ MAC_ADDR_LEN);
+ }
+ hw->multi_list_size = (u8) i;
+ hw_set_grp_addr(hw);
+ } else {
+ if (MAX_MULTICAST_LIST == hw->multi_list_size) {
+ --hw->all_multi;
+ hw_set_multicast(hw, hw->all_multi);
+ }
+ hw->multi_list_size = 0;
+ hw_clr_multicast(hw);
+ }
+}
+
+static int netdev_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int hw_mtu;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ /* Cannot use different MTU in multiple device interfaces mode. */
+ if (hw->dev_count > 1)
+ if (dev != hw_priv->dev)
+ return 0;
+ if (new_mtu < 60)
+ return -EINVAL;
+
+ if (dev->mtu != new_mtu) {
+ hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4;
+ if (hw_mtu > MAX_RX_BUF_SIZE)
+ return -EINVAL;
+ if (hw_mtu > REGULAR_RX_BUF_SIZE) {
+ hw->features |= RX_HUGE_FRAME;
+ hw_mtu = MAX_RX_BUF_SIZE;
+ } else {
+ hw->features &= ~RX_HUGE_FRAME;
+ hw_mtu = REGULAR_RX_BUF_SIZE;
+ }
+ hw_mtu = (hw_mtu + 3) & ~3;
+ hw_priv->mtu = hw_mtu;
+ dev->mtu = new_mtu;
+ }
+ return 0;
+}
+
+#define SIOCDEVDEBUG (SIOCDEVPRIVATE + 10)
+
+/**
+ * netdev_ioctl - I/O control processing
+ * @dev: Network device.
+ * @ifr: Interface request structure.
+ * @cmd: I/O control code.
+ *
+ * This function is used to process I/O control calls.
+ *
+ * Return 0 to indicate success.
+ */
+static int netdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+ int rc;
+ int result = 0;
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (down_interruptible(&priv->proc_sem))
+ return -ERESTARTSYS;
+
+ /* assume success */
+ rc = 0;
+ switch (cmd) {
+ /* Get address of MII PHY in use. */
+ case SIOCGMIIPHY:
+ data->phy_id = priv->id;
+
+ /* Fallthrough... */
+
+ /* Read MII PHY register. */
+ case SIOCGMIIREG:
+ if (data->phy_id != priv->id || data->reg_num >= 6)
+ result = -EIO;
+ else
+ hw_r_phy(hw, port->linked->port_id, data->reg_num,
+ &data->val_out);
+ break;
+
+ /* Write MII PHY register. */
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ result = -EPERM;
+ else if (data->phy_id != priv->id || data->reg_num >= 6)
+ result = -EIO;
+ else
+ hw_w_phy(hw, port->linked->port_id, data->reg_num,
+ data->val_in);
+ break;
+
+ case SIOCDEVDEBUG:
+ break;
+ default:
+ result = -EOPNOTSUPP;
+ }
+
+ up(&priv->proc_sem);
+
+ return result;
+}
+
+/*
+ * MII support
+ */
+
+/**
+ * mdio_read - read PHY register
+ * @dev: Network device.
+ * @phy_id: The PHY id.
+ * @reg_num: The register number.
+ *
+ * This function returns the PHY register value.
+ *
+ * Return the register value.
+ */
+static int mdio_read(struct net_device *dev, int phy_id, int reg_num)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct ksz_port *port = &priv->port;
+ struct ksz_hw *hw = port->hw;
+ u16 val_out;
+
+ hw_r_phy(hw, port->linked->port_id, reg_num << 1, &val_out);
+ return val_out;
+}
+
+/**
+ * mdio_write - set PHY register
+ * @dev: Network device.
+ * @phy_id: The PHY id.
+ * @reg_num: The register number.
+ * @val: The register value.
+ *
+ * This procedure sets the PHY register value.
+ */
+static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct ksz_port *port = &priv->port;
+ struct ksz_hw *hw = port->hw;
+ int i;
+ int pi;
+
+ for (i = 0, pi = port->first_port; i < port->port_cnt; i++, pi++)
+ hw_w_phy(hw, pi, reg_num << 1, val);
+}
+
+/*
+ * ethtool support
+ */
+
+#define EEPROM_SIZE 0x40
+
+static u16 eeprom_data[EEPROM_SIZE] = { 0 };
+
+#define ADVERTISED_ALL \
+ (ADVERTISED_10baseT_Half | \
+ ADVERTISED_10baseT_Full | \
+ ADVERTISED_100baseT_Half | \
+ ADVERTISED_100baseT_Full)
+
+/* These functions use the MII functions in mii.c. */
+
+/**
+ * netdev_get_settings - get network device settings
+ * @dev: Network device.
+ * @cmd: Ethtool command.
+ *
+ * This function queries the PHY and returns its state in the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+
+ mutex_lock(&hw_priv->lock);
+ mii_ethtool_gset(&priv->mii_if, cmd);
+ cmd->advertising |= SUPPORTED_TP;
+ mutex_unlock(&hw_priv->lock);
+
+ /* Save advertised settings for workaround in next function. */
+ priv->advertising = cmd->advertising;
+ return 0;
+}
+
+/**
+ * netdev_set_settings - set network device settings
+ * @dev: Network device.
+ * @cmd: Ethtool command.
+ *
+ * This function sets the PHY according to the ethtool command.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_port *port = &priv->port;
+ int rc;
+
+ /*
+ * ethtool utility does not change advertised setting if auto
+ * negotiation is not specified explicitly.
+ */
+ if (cmd->autoneg && priv->advertising == cmd->advertising) {
+ cmd->advertising |= ADVERTISED_ALL;
+ if (10 == cmd->speed)
+ cmd->advertising &=
+ ~(ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half);
+ else if (100 == cmd->speed)
+ cmd->advertising &=
+ ~(ADVERTISED_10baseT_Full |
+ ADVERTISED_10baseT_Half);
+ if (0 == cmd->duplex)
+ cmd->advertising &=
+ ~(ADVERTISED_100baseT_Full |
+ ADVERTISED_10baseT_Full);
+ else if (1 == cmd->duplex)
+ cmd->advertising &=
+ ~(ADVERTISED_100baseT_Half |
+ ADVERTISED_10baseT_Half);
+ }
+ mutex_lock(&hw_priv->lock);
+ if (cmd->autoneg &&
+ (cmd->advertising & ADVERTISED_ALL) ==
+ ADVERTISED_ALL) {
+ port->duplex = 0;
+ port->speed = 0;
+ port->force_link = 0;
+ } else {
+ port->duplex = cmd->duplex + 1;
+ if (cmd->speed != 1000)
+ port->speed = cmd->speed;
+ if (cmd->autoneg)
+ port->force_link = 0;
+ else
+ port->force_link = 1;
+ }
+ rc = mii_ethtool_sset(&priv->mii_if, cmd);
+ mutex_unlock(&hw_priv->lock);
+ return rc;
+}
+
+/**
+ * netdev_nway_reset - restart auto-negotiation
+ * @dev: Network device.
+ *
+ * This function restarts the PHY for auto-negotiation.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_nway_reset(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ int rc;
+
+ mutex_lock(&hw_priv->lock);
+ rc = mii_nway_restart(&priv->mii_if);
+ mutex_unlock(&hw_priv->lock);
+ return rc;
+}
+
+/**
+ * netdev_get_link - get network device link status
+ * @dev: Network device.
+ *
+ * This function gets the link status from the PHY.
+ *
+ * Return true if PHY is linked and false otherwise.
+ */
+static u32 netdev_get_link(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ int rc;
+
+ rc = mii_link_ok(&priv->mii_if);
+ return rc;
+}
+
+/**
+ * netdev_get_drvinfo - get network driver information
+ * @dev: Network device.
+ * @info: Ethtool driver info data structure.
+ *
+ * This procedure returns the driver information.
+ */
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(hw_priv->pdev));
+}
+
+/**
+ * netdev_get_regs_len - get length of register dump
+ * @dev: Network device.
+ *
+ * This function returns the length of the register dump.
+ *
+ * Return length of the register dump.
+ */
+static struct hw_regs {
+ int start;
+ int end;
+} hw_regs_range[] = {
+ { KS_DMA_TX_CTRL, KS884X_INTERRUPTS_STATUS },
+ { KS_ADD_ADDR_0_LO, KS_ADD_ADDR_F_HI },
+ { KS884X_ADDR_0_OFFSET, KS8841_WOL_FRAME_BYTE2_OFFSET },
+ { KS884X_SIDER_P, KS8842_SGCR7_P },
+ { KS8842_MACAR1_P, KS8842_TOSR8_P },
+ { KS884X_P1MBCR_P, KS8842_P3ERCR_P },
+ { 0, 0 }
+};
+
+static int netdev_get_regs_len(struct net_device *dev)
+{
+ struct hw_regs *range = hw_regs_range;
+ int regs_len = 0x10 * sizeof(u32);
+
+ while (range->end > range->start) {
+ regs_len += (range->end - range->start + 3) / 4 * 4;
+ range++;
+ }
+ return regs_len;
+}
+
+/**
+ * netdev_get_regs - get register dump
+ * @dev: Network device.
+ * @regs: Ethtool registers data structure.
+ * @ptr: Buffer to store the register values.
+ *
+ * This procedure dumps the register values in the provided buffer.
+ */
+static void netdev_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *ptr)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ int *buf = (int *) ptr;
+ struct hw_regs *range = hw_regs_range;
+ int len;
+
+ mutex_lock(&hw_priv->lock);
+ regs->version = 0;
+ for (len = 0; len < 0x40; len += 4) {
+ HW_PCI_READ_DWORD(hw, len, buf);
+ buf++;
+ }
+ while (range->end > range->start) {
+ for (len = range->start; len < range->end; len += 4) {
+ HW_R32(hw, len, buf);
+ buf++;
+ }
+ range++;
+ }
+ mutex_unlock(&hw_priv->lock);
+}
+
+#define WOL_SUPPORT \
+ (WAKE_PHY | WAKE_MAGIC | \
+ WAKE_UCAST | WAKE_MCAST | \
+ WAKE_BCAST | WAKE_ARP)
+
+/**
+ * netdev_get_wol - get Wake-on-LAN support
+ * @dev: Network device.
+ * @wol: Ethtool Wake-on-LAN data structure.
+ *
+ * This procedure returns Wake-on-LAN support.
+ */
+static void netdev_get_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wol)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+
+ wol->supported = hw_priv->wol_support;
+ wol->wolopts = hw_priv->wol_enable;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+/**
+ * netdev_set_wol - set Wake-on-LAN support
+ * @dev: Network device.
+ * @wol: Ethtool Wake-on-LAN data structure.
+ *
+ * This function sets Wake-on-LAN support.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wol)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+
+ /* Need to find a way to retrieve the device IP address. */
+ u8 net_addr[] = { 192, 168, 1, 1 };
+
+ if (wol->wolopts & ~hw_priv->wol_support)
+ return -EINVAL;
+
+ hw_priv->wol_enable = wol->wolopts;
+
+ /* Link wakeup cannot really be disabled. */
+ if (wol->wolopts)
+ hw_priv->wol_enable |= WAKE_PHY;
+ hw_enable_wol(&hw_priv->hw, hw_priv->wol_enable, net_addr);
+ return 0;
+}
+
+/**
+ * netdev_get_msglevel - get debug message level
+ * @dev: Network device.
+ *
+ * This function returns current debug message level.
+ *
+ * Return current debug message flags.
+ */
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+
+ return priv->msg_enable;
+}
+
+/**
+ * netdev_set_msglevel - set debug message level
+ * @dev: Network device.
+ * @value: Debug message flags.
+ *
+ * This procedure sets debug message level.
+ */
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+
+ priv->msg_enable = value;
+}
+
+/**
+ * netdev_get_eeprom_len - get EEPROM length
+ * @dev: Network device.
+ *
+ * This function returns the length of the EEPROM.
+ *
+ * Return length of the EEPROM.
+ */
+static int netdev_get_eeprom_len(struct net_device *dev)
+{
+ return EEPROM_SIZE * 2;
+}
+
+/**
+ * netdev_get_eeprom - get EEPROM data
+ * @dev: Network device.
+ * @eeprom: Ethtool EEPROM data structure.
+ * @data: Buffer to store the EEPROM data.
+ *
+ * This function dumps the EEPROM data in the provided buffer.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+#define EEPROM_MAGIC 0x10A18842
+
+static int netdev_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ u8 *eeprom_byte = (u8 *) eeprom_data;
+ int i;
+ int len;
+
+ len = (eeprom->offset + eeprom->len + 1) / 2;
+ for (i = eeprom->offset / 2; i < len; i++)
+ eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+ eeprom->magic = EEPROM_MAGIC;
+ memcpy(data, &eeprom_byte[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+/**
+ * netdev_set_eeprom - write EEPROM data
+ * @dev: Network device.
+ * @eeprom: Ethtool EEPROM data structure.
+ * @data: Data buffer.
+ *
+ * This function modifies the EEPROM data one byte at a time.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ u16 eeprom_word[EEPROM_SIZE];
+ u8 *eeprom_byte = (u8 *) eeprom_word;
+ int i;
+ int len;
+
+ if (eeprom->magic != EEPROM_MAGIC)
+ return 1;
+
+ len = (eeprom->offset + eeprom->len + 1) / 2;
+ for (i = eeprom->offset / 2; i < len; i++)
+ eeprom_data[i] = eeprom_read(&hw_priv->hw, i);
+ memcpy(eeprom_word, eeprom_data, EEPROM_SIZE * 2);
+ memcpy(&eeprom_byte[eeprom->offset], data, eeprom->len);
+ for (i = 0; i < EEPROM_SIZE; i++)
+ if (eeprom_word[i] != eeprom_data[i]) {
+ eeprom_data[i] = eeprom_word[i];
+ eeprom_write(&hw_priv->hw, i, eeprom_data[i]);
+ }
+
+ return 0;
+}
+
+/**
+ * netdev_get_pauseparam - get flow control parameters
+ * @dev: Network device.
+ * @pause: Ethtool PAUSE settings data structure.
+ *
+ * This procedure returns the PAUSE control flow settings.
+ */
+static void netdev_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ pause->autoneg = (hw->overrides & PAUSE_FLOW_CTRL) ? 0 : 1;
+ if (!hw->ksz_switch) {
+ pause->rx_pause =
+ (hw->rx_cfg & DMA_RX_FLOW_ENABLE) ? 1 : 0;
+ pause->tx_pause =
+ (hw->tx_cfg & DMA_TX_FLOW_ENABLE) ? 1 : 0;
+ } else {
+ pause->rx_pause =
+ (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_RX_FLOW_CTRL)) ? 1 : 0;
+ pause->tx_pause =
+ (sw_chk(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_TX_FLOW_CTRL)) ? 1 : 0;
+ }
+}
+
+/**
+ * netdev_set_pauseparam - set flow control parameters
+ * @dev: Network device.
+ * @pause: Ethtool PAUSE settings data structure.
+ *
+ * This function sets the PAUSE control flow settings.
+ * Not implemented yet.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pause)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+
+ mutex_lock(&hw_priv->lock);
+ if (pause->autoneg) {
+ if (!pause->rx_pause && !pause->tx_pause)
+ port->flow_ctrl = PHY_NO_FLOW_CTRL;
+ else
+ port->flow_ctrl = PHY_FLOW_CTRL;
+ hw->overrides &= ~PAUSE_FLOW_CTRL;
+ port->force_link = 0;
+ if (hw->ksz_switch) {
+ sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_RX_FLOW_CTRL, 1);
+ sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_TX_FLOW_CTRL, 1);
+ }
+ port_set_link_speed(port);
+ } else {
+ hw->overrides |= PAUSE_FLOW_CTRL;
+ if (hw->ksz_switch) {
+ sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_RX_FLOW_CTRL, pause->rx_pause);
+ sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET,
+ SWITCH_TX_FLOW_CTRL, pause->tx_pause);
+ } else
+ set_flow_ctrl(hw, pause->rx_pause, pause->tx_pause);
+ }
+ mutex_unlock(&hw_priv->lock);
+
+ return 0;
+}
+
+/**
+ * netdev_get_ringparam - get tx/rx ring parameters
+ * @dev: Network device.
+ * @pause: Ethtool RING settings data structure.
+ *
+ * This procedure returns the TX/RX ring settings.
+ */
+static void netdev_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ ring->tx_max_pending = (1 << 9);
+ ring->tx_pending = hw->tx_desc_info.alloc;
+ ring->rx_max_pending = (1 << 9);
+ ring->rx_pending = hw->rx_desc_info.alloc;
+}
+
+#define STATS_LEN (TOTAL_PORT_COUNTER_NUM)
+
+static struct {
+ char string[ETH_GSTRING_LEN];
+} ethtool_stats_keys[STATS_LEN] = {
+ { "rx_lo_priority_octets" },
+ { "rx_hi_priority_octets" },
+ { "rx_undersize_packets" },
+ { "rx_fragments" },
+ { "rx_oversize_packets" },
+ { "rx_jabbers" },
+ { "rx_symbol_errors" },
+ { "rx_crc_errors" },
+ { "rx_align_errors" },
+ { "rx_mac_ctrl_packets" },
+ { "rx_pause_packets" },
+ { "rx_bcast_packets" },
+ { "rx_mcast_packets" },
+ { "rx_ucast_packets" },
+ { "rx_64_or_less_octet_packets" },
+ { "rx_65_to_127_octet_packets" },
+ { "rx_128_to_255_octet_packets" },
+ { "rx_256_to_511_octet_packets" },
+ { "rx_512_to_1023_octet_packets" },
+ { "rx_1024_to_1522_octet_packets" },
+
+ { "tx_lo_priority_octets" },
+ { "tx_hi_priority_octets" },
+ { "tx_late_collisions" },
+ { "tx_pause_packets" },
+ { "tx_bcast_packets" },
+ { "tx_mcast_packets" },
+ { "tx_ucast_packets" },
+ { "tx_deferred" },
+ { "tx_total_collisions" },
+ { "tx_excessive_collisions" },
+ { "tx_single_collisions" },
+ { "tx_mult_collisions" },
+
+ { "rx_discards" },
+ { "tx_discards" },
+};
+
+/**
+ * netdev_get_strings - get statistics identity strings
+ * @dev: Network device.
+ * @stringset: String set identifier.
+ * @buf: Buffer to store the strings.
+ *
+ * This procedure returns the strings used to identify the statistics.
+ */
+static void netdev_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ if (ETH_SS_STATS == stringset)
+ memcpy(buf, ðtool_stats_keys,
+ ETH_GSTRING_LEN * hw->mib_cnt);
+}
+
+/**
+ * netdev_get_sset_count - get statistics size
+ * @dev: Network device.
+ * @sset: The statistics set number.
+ *
+ * This function returns the size of the statistics to be reported.
+ *
+ * Return size of the statistics to be reported.
+ */
+static int netdev_get_sset_count(struct net_device *dev, int sset)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ switch (sset) {
+ case ETH_SS_STATS:
+ return hw->mib_cnt;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * netdev_get_ethtool_stats - get network device statistics
+ * @dev: Network device.
+ * @stats: Ethtool statistics data structure.
+ * @data: Buffer to store the statistics.
+ *
+ * This procedure returns the statistics.
+ */
+static void netdev_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+ int n_stats = stats->n_stats;
+ int i;
+ int n;
+ int p;
+ int rc;
+ u64 counter[TOTAL_PORT_COUNTER_NUM];
+
+ mutex_lock(&hw_priv->lock);
+ n = SWITCH_PORT_NUM;
+ for (i = 0, p = port->first_port; i < port->mib_port_cnt; i++, p++) {
+ if (media_connected == hw->port_mib[p].state) {
+ hw_priv->counter[p].read = 1;
+
+ /* Remember first port that requests read. */
+ if (n == SWITCH_PORT_NUM)
+ n = p;
+ }
+ }
+ mutex_unlock(&hw_priv->lock);
+
+ if (n < SWITCH_PORT_NUM)
+ schedule_work(&hw_priv->mib_read);
+
+ if (1 == port->mib_port_cnt && n < SWITCH_PORT_NUM) {
+ p = n;
+ rc = wait_event_interruptible_timeout(
+ hw_priv->counter[p].counter,
+ 2 == hw_priv->counter[p].read,
+ HZ * 1);
+ } else
+ for (i = 0, p = n; i < port->mib_port_cnt - n; i++, p++) {
+ if (0 == i) {
+ rc = wait_event_interruptible_timeout(
+ hw_priv->counter[p].counter,
+ 2 == hw_priv->counter[p].read,
+ HZ * 2);
+ } else if (hw->port_mib[p].cnt_ptr) {
+ rc = wait_event_interruptible_timeout(
+ hw_priv->counter[p].counter,
+ 2 == hw_priv->counter[p].read,
+ HZ * 1);
+ }
+ }
+
+ get_mib_counters(hw, port->first_port, port->mib_port_cnt, counter);
+ n = hw->mib_cnt;
+ if (n > n_stats)
+ n = n_stats;
+ n_stats -= n;
+ for (i = 0; i < n; i++)
+ *data++ = counter[i];
+}
+
+/**
+ * netdev_get_rx_csum - get receive checksum support
+ * @dev: Network device.
+ *
+ * This function gets receive checksum support setting.
+ *
+ * Return true if receive checksum is enabled; false otherwise.
+ */
+static u32 netdev_get_rx_csum(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ return hw->rx_cfg &
+ (DMA_RX_CSUM_UDP |
+ DMA_RX_CSUM_TCP |
+ DMA_RX_CSUM_IP);
+}
+
+/**
+ * netdev_set_rx_csum - set receive checksum support
+ * @dev: Network device.
+ * @data: Zero to disable receive checksum support.
+ *
+ * This function sets receive checksum support setting.
+ *
+ * Return 0 if successful; otherwise an error code.
+ */
+static int netdev_set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ u32 new_setting = hw->rx_cfg;
+
+ if (data)
+ new_setting |=
+ (DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+ DMA_RX_CSUM_IP);
+ else
+ new_setting &=
+ ~(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
+ DMA_RX_CSUM_IP);
+ new_setting &= ~DMA_RX_CSUM_UDP;
+ mutex_lock(&hw_priv->lock);
+ if (new_setting != hw->rx_cfg) {
+ hw->rx_cfg = new_setting;
+ if (hw->enabled)
+ HW_W32(hw, KS_DMA_RX_CTRL, hw->rx_cfg);
+ }
+ mutex_unlock(&hw_priv->lock);
+ return 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_settings = netdev_get_settings,
+ .set_settings = netdev_set_settings,
+ .nway_reset = netdev_nway_reset,
+ .get_link = netdev_get_link,
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_regs_len = netdev_get_regs_len,
+ .get_regs = netdev_get_regs,
+ .get_wol = netdev_get_wol,
+ .set_wol = netdev_set_wol,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+ .get_eeprom_len = netdev_get_eeprom_len,
+ .get_eeprom = netdev_get_eeprom,
+ .set_eeprom = netdev_set_eeprom,
+ .get_pauseparam = netdev_get_pauseparam,
+ .set_pauseparam = netdev_set_pauseparam,
+ .get_ringparam = netdev_get_ringparam,
+ .get_strings = netdev_get_strings,
+ .get_sset_count = netdev_get_sset_count,
+ .get_ethtool_stats = netdev_get_ethtool_stats,
+ .get_rx_csum = netdev_get_rx_csum,
+ .set_rx_csum = netdev_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+};
+
+/*
+ * Hardware monitoring
+ */
+
+static void update_link(struct net_device *dev, struct dev_priv *priv,
+ struct ksz_port *port)
+{
+ if (priv->media_state != port->linked->state) {
+ priv->media_state = port->linked->state;
+ if (netif_running(dev)) {
+ if (media_connected == priv->media_state)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ if (netif_msg_link(priv))
+ printk(KERN_INFO "%s link %s\n", dev->name,
+ (media_connected == priv->media_state ?
+ "on" : "off"));
+ }
+ }
+}
+
+#ifdef CONFIG_KSZ8842_STP
+static void monitor_ports(struct ksz_hw *hw)
+{
+ int port;
+ struct net_device *bridge_dev = NULL;
+ struct ksz_switch *sw = hw->ksz_switch;
+ u8 member = sw->member;
+
+ for (port = 0; port < SWITCH_PORT_NUM; port++) {
+ struct net_device *dev = hw->port_info[port].pdev;
+
+ if (!dev->br_port)
+ continue;
+
+ /* Port is under bridge. */
+ bridge_dev = dev->br_port->br->dev;
+ if (sw->port_cfg[port].stp_state != dev->br_port->state) {
+ if (STP_STATE_FORWARDING ==
+ sw->port_cfg[port].stp_state)
+ member &= ~(1 << port);
+ if (STP_STATE_FORWARDING == dev->br_port->state)
+ member |= (1 << port);
+ port_set_stp_state(hw, port, dev->br_port->state);
+ if (STP_STATE_LEARNING == dev->br_port->state)
+ sw_flush_dyn_mac_table(hw);
+ }
+ }
+
+ if (member != sw->member) {
+ if (!sw->member) {
+ port_set_stp_state(hw, SWITCH_PORT_NUM,
+ STP_STATE_BLOCKED);
+ sw->br_addr[0] = 0xFF;
+ }
+ sw->member = member;
+ bridge_change(hw);
+ }
+
+ /* At least one port in forwarding state. */
+ if (sw->member && bridge_dev && memcmp(bridge_dev->dev_addr,
+ sw->br_addr, MAC_ADDR_LEN)) {
+ memcpy(sw->br_addr, bridge_dev->dev_addr, MAC_ADDR_LEN);
+ sw_pass_addr(hw);
+ }
+}
+#else
+static void monitor_ports(struct ksz_hw *hw) {}
+#endif
+
+static void mib_read_work(struct work_struct *work)
+{
+ struct dev_info *hw_priv =
+ container_of(work, struct dev_info, mib_read);
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port_mib *mib;
+ int i;
+
+ next_jiffies = jiffies;
+ for (i = 0; i < hw->mib_port_cnt; i++) {
+ mib = &hw->port_mib[i];
+
+ /* Reading MIB counters or requested to read. */
+ if (mib->cnt_ptr || 1 == hw_priv->counter[i].read) {
+
+ /* Need to process receive interrupt. */
+ if (port_r_cnt(hw, i))
+ break;
+ hw_priv->counter[i].read = 0;
+
+ /* Finish reading counters. */
+ if (0 == mib->cnt_ptr) {
+ hw_priv->counter[i].read = 2;
+ wake_up_interruptible(
+ &hw_priv->counter[i].counter);
+ }
+ } else if (jiffies >= hw_priv->counter[i].time) {
+ /* Only read MIB counters when the port is connected. */
+ if (media_connected == mib->state)
+ hw_priv->counter[i].read = 1;
+ next_jiffies += HZ * 1 * hw->mib_port_cnt;
+ hw_priv->counter[i].time = next_jiffies;
+
+ /* Port is just disconnected. */
+ } else if (mib->link_down) {
+ mib->link_down = 0;
+
+ /* Read counters one last time after link is lost. */
+ hw_priv->counter[i].read = 1;
+ }
+ }
+}
+
+static void mib_monitor(unsigned long ptr)
+{
+ struct dev_info *hw_priv = (struct dev_info *) ptr;
+
+ mib_read_work(&hw_priv->mib_read);
+
+ /* This is used to verify Wake-on-LAN is working. */
+ if (hw_priv->pme_wait) {
+ if (hw_priv->pme_wait <= jiffies) {
+ hw_clr_wol_pme_status(&hw_priv->hw);
+ hw_priv->pme_wait = 0;
+ }
+ } else if (hw_chk_wol_pme_status(&hw_priv->hw)) {
+
+ /* PME is asserted. Wait 2 seconds to clear it. */
+ hw_priv->pme_wait = jiffies + HZ * 2;
+ }
+
+ ksz_update_timer(&hw_priv->mib_timer_info);
+}
+
+/**
+ * dev_monitor - periodic monitoring
+ * @ptr: Network device pointer.
+ *
+ * This routine is run in a kernel timer to monitor the network device.
+ */
+static void dev_monitor(unsigned long ptr)
+{
+ struct net_device *dev = (struct net_device *) ptr;
+ struct dev_priv *priv = netdev_priv(dev);
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+
+ if (!(hw->features & LINK_INT_WORKING))
+ port_get_link_speed(port);
+ update_link(dev, priv, port);
+
+ /* Monitor the ports for user bridge changes. */
+ if (hw->features & STP_SUPPORT)
+ monitor_ports(hw);
+
+ ksz_update_timer(&priv->monitor_timer_info);
+}
+
+/*
+ * Proc handling
+ */
+
+static struct ksz_proc_def proc_def[PROC_LAST] = {
+
+ /* Read-only entries. */
+ { FOR_ALL, PROC_INFO, "info", },
+ { FOR_LAN, PROC_DYNAMIC, "dynamic", },
+ { FOR_LAN, PROC_STATIC, "static", },
+
+ /* Read-write entries. */
+ { FOR_ALL, PROC_SET_DUPLEX, "duplex", },
+ { FOR_ALL, PROC_SET_SPEED, "speed", },
+ { FOR_ALL, PROC_SET_FORCE, "force", },
+ { FOR_ALL, PROC_SET_FLOW_CTRL, "flow_ctrl", },
+ { FOR_ALL, PROC_SET_MIB, "mib", },
+ { FOR_WAN, PROC_SET_PME, "pme", },
+
+ { FOR_LAN, PROC_SET_BROADCAST_STORM, "broadcast_percent", },
+ { FOR_LAN, PROC_SET_DIFFSERV, "v_diffserv", },
+ { FOR_LAN, PROC_SET_802_1P, "v_802_1p", },
+
+ { FOR_LAN, PROC_ENABLE_VLAN, "vlan", },
+ { FOR_LAN, PROC_SET_REPLACE_NULL_VID, "replace_null_vid", },
+
+ { FOR_ALL, PROC_MAIN_LAST, "main", },
+
+ /* Port specific read-only entries. */
+ { FOR_OUT, PROC_GET_PORT_DUPLEX, "duplex", },
+ { FOR_OUT, PROC_GET_PORT_SPEED, "speed", },
+ { FOR_LAN, PROC_GET_PORT_MIB, "mib", },
+
+ { FOR_OUT, PROC_GET_CABLE_STATUS, "cable_status", },
+ { FOR_OUT, PROC_GET_LINK_STATUS, "link_status", },
+
+ /* Port specific read-write entries. */
+ { FOR_LAN, PROC_SET_DEF_VID, "vid", },
+
+ { FOR_OUT, PROC_SET_CAPABILITIES, "set_capabilities", },
+
+ { FOR_LAN, PROC_ENABLE_BROADCAST_STORM, "broadcast_storm", },
+ { FOR_LAN, PROC_ENABLE_DIFFSERV, "diffserv", },
+ { FOR_LAN, PROC_ENABLE_802_1P, "p_802_1p", },
+ { FOR_LAN, PROC_ENABLE_PRIO_QUEUE, "prio_queue", },
+
+ { FOR_LAN, PROC_SET_PORT_BASED, "port_based", },
+
+ { FOR_LAN, PROC_SET_DIS_NON_VID, "non_vid", },
+ { FOR_LAN, PROC_SET_INGRESS, "ingress", },
+ { FOR_LAN, PROC_SET_INSERT_TAG, "ins_tag", },
+ { FOR_LAN, PROC_SET_REMOVE_TAG, "rmv_tag", },
+ { FOR_LAN, PROC_SET_REPLACE_VID, "replace_vid", },
+
+ { FOR_LAN, PROC_ENABLE_PRIO_RATE, "prio_rate", },
+ { FOR_LAN, PROC_SET_RX_P0_RATE, "rx_p0_rate", },
+ { FOR_LAN, PROC_SET_RX_P1_RATE, "rx_p1_rate", },
+ { FOR_LAN, PROC_SET_RX_P2_RATE, "rx_p2_rate", },
+ { FOR_LAN, PROC_SET_RX_P3_RATE, "rx_p3_rate", },
+ { FOR_LAN, PROC_SET_TX_P0_RATE, "tx_p0_rate", },
+ { FOR_LAN, PROC_SET_TX_P1_RATE, "tx_p1_rate", },
+ { FOR_LAN, PROC_SET_TX_P2_RATE, "tx_p2_rate", },
+ { FOR_LAN, PROC_SET_TX_P3_RATE, "tx_p3_rate", },
+};
+
+/**
+ * read_proc - /proc read handling
+ * @buf:
+ * @start:
+ * @offset:
+ * @count:
+ * @eof:
+ * @data:
+ *
+ * This function process the read operation of /proc files.
+ *
+ * Return the length of buffer data returned.
+ */
+static int read_proc(char *buf, char **start, off_t offset, int count, int *eof,
+ void *data)
+{
+ int len = 0;
+ int processed = 1;
+ struct ksz_proc_info *proc = data;
+ struct ksz_proc_def *info = proc->info;
+ struct dev_priv *priv = proc->priv;
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_port *port = &priv->port;
+ struct ksz_hw *hw = port->hw;
+ struct ksz_port_info *port_info;
+ struct ksz_switch *sw = hw->ksz_switch;
+ int i;
+ u32 result[5 * 2];
+
+ /* Why want more? */
+ if (offset) {
+ *eof = 1;
+ return 0;
+ }
+
+ if (down_interruptible(&priv->proc_sem))
+ return -ERESTARTSYS;
+
+ switch (info->proc_num) {
+ case PROC_SET_DUPLEX:
+ len += sprintf(buf + len, "%u; ", port->duplex);
+ if (media_connected == port->linked->state) {
+ if (1 == port->linked->duplex)
+ len += sprintf(buf + len, "half-duplex\n");
+ else if (2 == port->linked->duplex)
+ len += sprintf(buf + len, "full-duplex\n");
+ } else
+ len += sprintf(buf + len, "unlinked\n");
+ break;
+ case PROC_SET_SPEED:
+ len += sprintf(buf + len, "%u; ", port->speed);
+ if (media_connected == port->linked->state)
+ len += sprintf(buf + len, "%u\n",
+ port->linked->tx_rate / TX_RATE_UNIT);
+ else
+ len += sprintf(buf + len, "unlinked\n");
+ break;
+ case PROC_SET_FORCE:
+ len += sprintf(buf + len, "%u\n", port->force_link);
+ break;
+ case PROC_SET_FLOW_CTRL:
+ len += sprintf(buf + len, "%u; ", port->flow_ctrl);
+ switch (port->flow_ctrl) {
+ case PHY_FLOW_CTRL:
+ len += sprintf(buf + len, "flow control\n");
+ break;
+ case PHY_TX_ONLY:
+ len += sprintf(buf + len, "tx only\n");
+ break;
+ case PHY_RX_ONLY:
+ len += sprintf(buf + len, "rx only\n");
+ break;
+ default:
+ len += sprintf(buf + len, "no flow control\n");
+ break;
+ }
+ break;
+ case PROC_SET_MIB:
+ len += display_mib_counters(hw, port->first_port,
+ port->mib_port_cnt, buf + len);
+ break;
+ case PROC_GET_PORT_DUPLEX:
+ port_info = &hw->port_info[proc->port];
+ if (media_connected == port_info->state) {
+ if (1 == port_info->duplex)
+ len += sprintf(buf + len, "half-duplex\n");
+ else if (2 == port_info->duplex)
+ len += sprintf(buf + len, "full-duplex\n");
+ } else
+ len += sprintf(buf + len, "unlinked\n");
+ break;
+ case PROC_GET_PORT_SPEED:
+ port_info = &hw->port_info[proc->port];
+ if (media_connected == port_info->state)
+ len += sprintf(buf + len, "%u\n",
+ port_info->tx_rate / TX_RATE_UNIT);
+ else
+ len += sprintf(buf + len, "unlinked\n");
+ break;
+ case PROC_GET_PORT_MIB:
+ len += display_mib_counters(hw, proc->port, 1, buf + len);
+ break;
+ case PROC_SET_BROADCAST_STORM:
+ len += sprintf(buf + len, "%u%%\n", sw->broad_per);
+ break;
+ case PROC_SET_DIFFSERV:
+ for (i = 0; i < DIFFSERV_ENTRIES; i++) {
+ len += sprintf(buf + len, "%2u=%u ", i, (int)
+ sw->diffserv[i]);
+ if ((i % 8) == 7)
+ len += sprintf(buf + len, "\n");
+ }
+ break;
+ case PROC_SET_802_1P:
+ for (i = 0; i < PRIO_802_1P_ENTRIES; i++)
+ len += sprintf(buf + len, "%u=%u ", i,
+ sw->p_802_1p[i]);
+ len += sprintf(buf + len, "\n");
+ break;
+ case PROC_ENABLE_VLAN:
+ len += sprintf(buf + len, "%u\n",
+ sw_chk(hw, KS8842_SWITCH_CTRL_2_OFFSET,
+ SWITCH_VLAN_ENABLE));
+ break;
+ case PROC_SET_REPLACE_NULL_VID:
+ len += sprintf(buf + len, "%u\n",
+ sw_chk(hw, KS8842_SWITCH_CTRL_3_OFFSET,
+ SWITCH_REPLACE_NULL_VID));
+ break;
+ case PROC_SET_PORT_BASED:
+ len += sprintf(buf + len, "%u\n",
+ sw->port_cfg[proc->port].port_prio);
+ break;
+ case PROC_SET_DEF_VID:
+ len += sprintf(buf + len, "%u\n",
+ sw->port_cfg[proc->port].vid);
+ break;
+ case PROC_SET_DIS_NON_VID:
+ len += sprintf(buf + len, "%u\n",
+ port_chk_dis_non_vid(hw, proc->port));
+ break;
+ case PROC_SET_INGRESS:
+ len += sprintf(buf + len, "%u\n",
+ port_chk_in_filter(hw, proc->port));
+ break;
+ case PROC_SET_INSERT_TAG:
+ len += sprintf(buf + len, "%u\n",
+ port_chk_ins_tag(hw, proc->port));
+ break;
+ case PROC_SET_REMOVE_TAG:
+ len += sprintf(buf + len, "%u\n",
+ port_chk_rmv_tag(hw, proc->port));
+ break;
+ case PROC_SET_REPLACE_VID:
+ len += sprintf(buf + len, "%u\n",
+ port_chk_replace_vid(hw, proc->port));
+ break;
+ case PROC_SET_RX_P0_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].rx_rate[0]);
+ break;
+ case PROC_SET_RX_P1_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].rx_rate[1]);
+ break;
+ case PROC_SET_RX_P2_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].rx_rate[2]);
+ break;
+ case PROC_SET_RX_P3_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].rx_rate[3]);
+ break;
+ case PROC_SET_TX_P0_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].tx_rate[0]);
+ break;
+ case PROC_SET_TX_P1_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].tx_rate[1]);
+ break;
+ case PROC_SET_TX_P2_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].tx_rate[2]);
+ break;
+ case PROC_SET_TX_P3_RATE:
+ len += sprintf(buf + len, "%u\n", (int)
+ sw->port_cfg[proc->port].tx_rate[3]);
+ break;
+ default:
+ processed = 0;
+ }
+
+ /* Require hardware to be acquired first. */
+ if (!processed) {
+ mutex_lock(&hw_priv->lock);
+ switch (info->proc_num) {
+ case PROC_GET_CABLE_STATUS:
+ hw_get_cable_status(hw, proc->port, result);
+ len += sprintf(buf + len,
+ "^[%u:%u, %u:%u, %u:%u, %u:%u, %u:%u]$\n",
+ result[0], result[1],
+ result[2], result[3],
+ result[4], result[5],
+ result[6], result[7],
+ result[8], result[9]);
+ break;
+ case PROC_GET_LINK_STATUS:
+ hw_get_link_status(hw, proc->port, result);
+ len += sprintf(buf + len,
+ "^[%08X, %X, %08X, %08X, %08X, %08X]$\n",
+ result[0], result[1], result[2],
+ result[3], result[4], result[5]);
+ break;
+ case PROC_INFO:
+ break;
+ case PROC_DYNAMIC:
+ if (hw->ksz_switch)
+ sw_d_dyn_mac_table(hw);
+ break;
+ case PROC_STATIC:
+ if (hw->ksz_switch)
+ sw_d_sta_mac_table(hw);
+ break;
+ case PROC_SET_PME:
+ hw_clr_wol_pme_status(hw);
+ break;
+ case PROC_ENABLE_BROADCAST_STORM:
+ len += sprintf(buf + len, "%d\n",
+ port_chk_broad_storm(hw, proc->port));
+ break;
+ case PROC_ENABLE_DIFFSERV:
+ len += sprintf(buf + len, "%d\n",
+ port_chk_diffserv(hw, proc->port));
+ break;
+ case PROC_ENABLE_802_1P:
+ len += sprintf(buf + len, "%d\n",
+ port_chk_802_1p(hw, proc->port));
+ break;
+ case PROC_ENABLE_PRIO_QUEUE:
+ len += sprintf(buf + len, "%d\n",
+ port_chk_prio(hw, proc->port));
+ break;
+ case PROC_ENABLE_PRIO_RATE:
+ len += sprintf(buf + len, "%d\n",
+ sw_chk_prio_rate(hw, proc->port));
+ break;
+ default:
+ break;
+ }
+ mutex_unlock(&hw_priv->lock);
+ }
+ up(&priv->proc_sem);
+ *eof = 1;
+
+ return len;
+}
+
+/**
+ * write_proc - /proc write handling
+ * @file:
+ * @buffer:
+ * @count:
+ * @data:
+ *
+ * This function process the write operation of /proc files.
+ *
+ * Return the length of buffer data accepted.
+ */
+static int write_proc(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ int len;
+ int num;
+ int val;
+ char str[44];
+ struct ksz_proc_info *proc = data;
+ struct ksz_proc_def *info = proc->info;
+ struct dev_priv *priv = proc->priv;
+ struct dev_info *hw_priv = priv->adapter;
+ struct ksz_hw *hw = &hw_priv->hw;
+ struct ksz_port *port = &priv->port;
+
+ if (count > 40)
+ len = 40;
+ else
+ len = count;
+ if (copy_from_user(str, buffer, len))
+ return -EFAULT;
+
+ str[len] = '\0';
+ if ('\n' == str[len - 1])
+ str[len - 1] = '\0';
+ if (down_interruptible(&priv->proc_sem))
+ return -ERESTARTSYS;
+
+ mutex_lock(&hw_priv->lock);
+ if ('0' == str[0] && 'x' == str[1])
+ sscanf(&str[2], "%x", (unsigned int *) &num);
+ else if ('0' == str[0] && 'b' == str[1]) {
+ int i = 2;
+
+ num = 0;
+ while (str[i]) {
+ num <<= 1;
+ num |= str[i] - '0';
+ i++;
+ }
+ } else if ('0' == str[0] && 'd' == str[1])
+ sscanf(&str[2], "%u", &num);
+ else
+ sscanf(str, "%d", &num);
+ switch (info->proc_num) {
+ case PROC_SET_DUPLEX:
+ if (num <= 2)
+ port->duplex = (u8) num;
+ break;
+ case PROC_SET_SPEED:
+ if (0 == num || 10 == num || 100 == num)
+ port->speed = (u8) num;
+ break;
+ case PROC_SET_FORCE:
+ port->force_link = (u8) num;
+ break;
+ case PROC_SET_FLOW_CTRL:
+ if (num <= PHY_FLOW_CTRL)
+ port->flow_ctrl = (u8) num;
+ break;
+ case PROC_SET_MIB:
+ break;
+ case PROC_SET_PME:
+ hw_cfg_wol_pme(hw, num);
+ break;
+ case PROC_SET_CAPABILITIES:
+ hw_set_capabilities(hw, proc->port, num);
+ break;
+ case PROC_SET_BROADCAST_STORM:
+ hw_cfg_broad_storm(hw, num);
+ break;
+ case PROC_SET_DIFFSERV:
+ sscanf(str, "%d=%x", (unsigned int *) &num,
+ (unsigned int *) &val);
+ hw_cfg_tos_prio(hw, (u8) num, (u8) val);
+ break;
+ case PROC_SET_802_1P:
+ sscanf(str, "%d=%x", (unsigned int *) &num,
+ (unsigned int *) &val);
+ hw_cfg_802_1p_prio(hw, (u8) num, (u8) val);
+ break;
+ case PROC_ENABLE_VLAN:
+ if (!num)
+ sw_dis_vlan(hw);
+ else
+ sw_ena_vlan(hw);
+ break;
+ case PROC_SET_REPLACE_NULL_VID:
+ sw_cfg_replace_null_vid(hw, num);
+ break;
+ case PROC_ENABLE_BROADCAST_STORM:
+ if (!num)
+ sw_dis_broad_storm(hw, proc->port);
+ else
+ sw_ena_broad_storm(hw, proc->port);
+ break;
+ case PROC_ENABLE_DIFFSERV:
+ if (!num)
+ sw_dis_diffserv(hw, proc->port);
+ else
+ sw_ena_diffserv(hw, proc->port);
+ break;
+ case PROC_ENABLE_802_1P:
+ if (!num)
+ sw_dis_802_1p(hw, proc->port);
+ else
+ sw_ena_802_1p(hw, proc->port);
+ break;
+ case PROC_ENABLE_PRIO_QUEUE:
+ if (!num)
+ sw_dis_multi_queue(hw, proc->port);
+ else
+ sw_ena_multi_queue(hw, proc->port);
+ break;
+ case PROC_SET_PORT_BASED:
+ sw_cfg_port_based(hw, proc->port, num);
+ break;
+ case PROC_SET_DEF_VID:
+ sw_cfg_def_vid(hw, proc->port, num);
+ break;
+ case PROC_SET_DIS_NON_VID:
+ sw_vlan_cfg_dis_non_vid(hw, proc->port, num);
+ break;
+ case PROC_SET_INGRESS:
+ sw_vlan_cfg_in_filter(hw, proc->port, num);
+ break;
+ case PROC_SET_INSERT_TAG:
+ sw_vlan_cfg_ins_tag(hw, proc->port, num);
+ break;
+ case PROC_SET_REMOVE_TAG:
+ sw_vlan_cfg_rmv_tag(hw, proc->port, num);
+ break;
+ case PROC_SET_REPLACE_VID:
+ sw_cfg_replace_vid(hw, proc->port, num);
+ break;
+ case PROC_ENABLE_PRIO_RATE:
+ if (!num)
+ sw_dis_prio_rate(hw, proc->port);
+ else
+ sw_ena_prio_rate(hw, proc->port);
+ break;
+ case PROC_SET_RX_P0_RATE:
+ hw_cfg_rx_prio_rate(hw, proc->port, 0, num);
+ break;
+ case PROC_SET_RX_P1_RATE:
+ hw_cfg_rx_prio_rate(hw, proc->port, 1, num);
+ break;
+ case PROC_SET_RX_P2_RATE:
+ hw_cfg_rx_prio_rate(hw, proc->port, 2, num);
+ break;
+ case PROC_SET_RX_P3_RATE:
+ hw_cfg_rx_prio_rate(hw, proc->port, 3, num);
+ break;
+ case PROC_SET_TX_P0_RATE:
+ hw_cfg_tx_prio_rate(hw, proc->port, 0, num);
+ break;
+ case PROC_SET_TX_P1_RATE:
+ hw_cfg_tx_prio_rate(hw, proc->port, 1, num);
+ break;
+ case PROC_SET_TX_P2_RATE:
+ hw_cfg_tx_prio_rate(hw, proc->port, 2, num);
+ break;
+ case PROC_SET_TX_P3_RATE:
+ hw_cfg_tx_prio_rate(hw, proc->port, 3, num);
+ break;
+ default:
+ printk(KERN_ALERT "write_proc:%d\n", info->proc_num);
+ }
+ mutex_unlock(&hw_priv->lock);
+ up(&priv->proc_sem);
+
+ return len;
+}
+
+#define proc_dir_name "ksz884x"
+
+static void setup_read_proc(struct ksz_proc_info *info, struct dev_priv *priv,
+ int i, int pi, struct proc_dir_entry *proc)
+{
+ struct proc_dir_entry *proc_get;
+
+ info->priv = priv;
+ info->info = &proc_def[i];
+ info->port = pi;
+ proc_get = create_proc_read_entry(proc_def[i].proc_name, 0444, proc,
+ read_proc, info);
+}
+
+static void setup_write_proc(struct ksz_proc_info *info, struct dev_priv *priv,
+ int i, int pi, struct proc_dir_entry *proc)
+{
+ struct proc_dir_entry *proc_set;
+
+ info->priv = priv;
+ info->info = &proc_def[i];
+ info->port = pi;
+ proc_set = create_proc_entry(proc_def[i].proc_name, 0644, proc);
+ if (!proc_set)
+ return;
+ proc_set->data = info;
+ proc_set->read_proc = read_proc;
+ proc_set->write_proc = write_proc;
+}
+
+static void init_proc(struct dev_priv *priv)
+{
+ int i;
+ int j;
+ int pi;
+ char proc_name[40];
+ struct ksz_port *port = &priv->port;
+ int hw_port = priv->adapter->hw.mib_port_cnt;
+ int len = strlen(proc_dir_name) - 1;
+
+ sprintf(proc_name, "%s-%d", proc_dir_name, priv->id);
+ if (1 == hw_port)
+ proc_name[len] = '1';
+ else
+ proc_name[len] = '2';
+ sema_init(&priv->proc_sem, 1);
+ priv->proc_main = proc_mkdir(proc_name, NULL);
+ if (!priv->proc_main)
+ return;
+ pi = priv->id;
+
+ /* Read-only entries. */
+ for (i = 0; i < PROC_SET_DUPLEX; i++)
+ if (!proc_def[i].port_cnt || hw_port == proc_def[i].port_cnt)
+ setup_read_proc(&priv->proc_info[i],
+ priv, i, pi, priv->proc_main);
+
+ /* Can be written to. */
+ for (i = PROC_SET_DUPLEX; i < PROC_MAIN_LAST; i++)
+ if (!proc_def[i].port_cnt || hw_port == proc_def[i].port_cnt)
+ setup_write_proc(&priv->proc_info[i],
+ priv, i, pi, priv->proc_main);
+ for (pi = 0; pi < port->port_cnt; pi++) {
+ sprintf(proc_name, "%d", pi);
+ priv->proc_port[pi] = proc_mkdir(proc_name, priv->proc_main);
+ for (i = PROC_GET_PORT_DUPLEX; i < PROC_SET_DEF_VID; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (hw_port == proc_def[i].port_cnt ||
+ (FOR_OUT == proc_def[i].port_cnt &&
+ pi < HOST_PORT))
+ setup_read_proc(&priv->proc_port_info[pi][j],
+ priv, i, pi + port->first_port,
+ priv->proc_port[pi]);
+ }
+ for (i = PROC_SET_DEF_VID; i < PROC_LAST; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (hw_port == proc_def[i].port_cnt ||
+ (FOR_OUT == proc_def[i].port_cnt &&
+ pi < HOST_PORT))
+ setup_write_proc(&priv->proc_port_info[pi][j],
+ priv, i, pi + port->first_port,
+ priv->proc_port[pi]);
+ }
+ }
+ if (hw_port > 1) {
+ pi = HOST_PORT;
+ sprintf(proc_name, "%d", pi);
+ priv->proc_port[pi] = proc_mkdir(proc_name, priv->proc_main);
+ for (i = PROC_GET_PORT_DUPLEX; i < PROC_SET_DEF_VID; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (!proc_def[i].port_cnt ||
+ hw_port == proc_def[i].port_cnt)
+ setup_read_proc(&priv->proc_port_info[pi][j],
+ priv, i, pi, priv->proc_port[pi]);
+ }
+ for (i = PROC_SET_DEF_VID; i < PROC_LAST; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (!proc_def[i].port_cnt ||
+ hw_port == proc_def[i].port_cnt)
+ setup_write_proc(&priv->proc_port_info[pi][j],
+ priv, i, pi, priv->proc_port[pi]);
+ }
+ }
+}
+
+static void exit_proc(struct dev_priv *priv)
+{
+ int i;
+ int j;
+ int port;
+ char proc_name[40];
+ int len = strlen(proc_dir_name) - 1;
+
+ for (port = 0; port < priv->port.port_cnt; port++) {
+ if (priv->proc_port[port]) {
+ for (i = PROC_MAIN_LAST + 1; i < PROC_LAST; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (priv->proc_port_info[port][j].info)
+ remove_proc_entry(
+ proc_def[i].proc_name,
+ priv->proc_port[port]);
+ }
+ }
+ sprintf(proc_name, "%d", port);
+ remove_proc_entry(proc_name, priv->proc_main);
+ }
+ port = HOST_PORT;
+ if (priv->proc_port[port]) {
+ for (i = PROC_MAIN_LAST + 1; i < PROC_LAST; i++) {
+ j = i - PROC_MAIN_LAST - 1;
+ if (priv->proc_port_info[port][j].info)
+ remove_proc_entry(proc_def[i].proc_name,
+ priv->proc_port[port]);
+ }
+ sprintf(proc_name, "%d", port);
+ remove_proc_entry(proc_name, priv->proc_main);
+ }
+
+ for (i = 0; i < PROC_MAIN_LAST; i++) {
+ if (priv->proc_info[i].info)
+ remove_proc_entry(proc_def[i].proc_name,
+ priv->proc_main);
+ }
+
+ sprintf(proc_name, "%s-%d", proc_dir_name, priv->id);
+ if (1 == priv->adapter->hw.mib_port_cnt)
+ proc_name[len] = '1';
+ else
+ proc_name[len] = '2';
+ remove_proc_entry(proc_name, NULL);
+}
+
+/*
+ * Linux network device interface functions
+ */
+
+/* Driver exported variables */
+
+static int msg_enable;
+
+static char *macaddr = ":";
+static char *mac1addr = ":";
+
+/*
+ * This enables multiple network device mode for KSZ8842, which contains a
+ * switch with two physical ports. Some users like to take control of the
+ * ports for running Spanning Tree Protocol. The driver will create an
+ * additional eth? device for the other port.
+ *
+ * Some limitations are the network devices cannot have different MTU and
+ * multicast hash tables.
+ */
+static int multi_dev;
+
+/*
+ * As most users select multiple network device mode to use Spanning Tree
+ * Protocol, this enables a feature in which most unicast and multicast packets
+ * are forwarded inside the switch and not passed to the host. Only packets
+ * that need the host's attention are passed to it. This prevents the host
+ * wasting CPU time to examine each and every incoming packets and do the
+ * forwarding itself.
+ *
+ * As the hack requires the private bridge header, the driver cannot compile
+ * with just the kernel headers.
+ *
+ * Enabling STP support also turns on multiple network device mode.
+ */
+static int stp;
+
+/*
+ * This enables fast aging in the KSZ8842 switch. Not sure what situation
+ * needs that. However, fast aging is used to flush the dynamic MAC table when
+ * STP suport is enabled.
+ */
+static int fast_aging;
+
+/**
+ * netdev_init - initalize network device.
+ * @dev: Network device.
+ *
+ * This function initializes the network device.
+ *
+ * Return 0 if successful; otherwise an error code indicating failure.
+ */
+static int __init netdev_init(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+
+ /* 500 ms timeout */
+ ksz_init_timer(&priv->monitor_timer_info, 500 * HZ / 1000,
+ dev_monitor, dev);
+
+ /* 500 ms timeout */
+ dev->watchdog_timeo = HZ / 2;
+
+ dev->features |= NETIF_F_IP_CSUM;
+ dev->features |= NETIF_F_IPV6_CSUM;
+ dev->features |= NETIF_F_SG;
+
+ init_proc(priv);
+
+ priv->mii_if.phy_id_mask = 0x1;
+ priv->mii_if.reg_num_mask = 0x7;
+ priv->mii_if.dev = dev;
+ priv->mii_if.mdio_read = mdio_read;
+ priv->mii_if.mdio_write = mdio_write;
+ priv->mii_if.phy_id = priv->port.first_port + 1;
+
+ priv->msg_enable = netif_msg_init(msg_enable,
+ (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK));
+
+ return 0;
+}
+
+static const struct net_device_ops netdev_ops = {
+ .ndo_init = netdev_init,
+ .ndo_open = netdev_open,
+ .ndo_stop = netdev_close,
+ .ndo_get_stats = netdev_query_statistics,
+ .ndo_start_xmit = netdev_tx,
+ .ndo_tx_timeout = netdev_tx_timeout,
+ .ndo_change_mtu = netdev_change_mtu,
+ .ndo_set_mac_address = netdev_set_mac_address,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_set_rx_mode = netdev_set_rx_mode,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = netdev_netpoll,
+#endif
+};
+
+static void netdev_free(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+
+ if (dev->watchdog_timeo)
+ unregister_netdev(dev);
+
+ if (priv->proc_main)
+ exit_proc(priv);
+ free_netdev(dev);
+}
+
+struct platform_info {
+ struct dev_info dev_info;
+ struct net_device *netdev[SWITCH_PORT_NUM];
+};
+
+static int net_device_present;
+
+static void get_mac_addr(struct dev_info *hw_priv, u8 *macaddr, int port)
+{
+ int i;
+ int j;
+ int got_num;
+ int num;
+
+ i = j = num = got_num = 0;
+ while (j < MAC_ADDR_LEN) {
+ if (macaddr[i]) {
+ got_num = 1;
+ if ('0' <= macaddr[i] && macaddr[i] <= '9')
+ num = num * 16 + macaddr[i] - '0';
+ else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
+ num = num * 16 + 10 + macaddr[i] - 'A';
+ else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
+ num = num * 16 + 10 + macaddr[i] - 'a';
+ else if (':' == macaddr[i])
+ got_num = 2;
+ else
+ break;
+ } else if (got_num)
+ got_num = 2;
+ else
+ break;
+ if (2 == got_num) {
+ if (MAIN_PORT == port) {
+ hw_priv->hw.override_addr[j++] = (u8) num;
+ hw_priv->hw.override_addr[5] +=
+ hw_priv->hw.id;
+ } else {
+ hw_priv->hw.ksz_switch->other_addr[j++] =
+ (u8) num;
+ hw_priv->hw.ksz_switch->other_addr[5] +=
+ hw_priv->hw.id;
+ }
+ num = got_num = 0;
+ }
+ i++;
+ }
+ if (MAC_ADDR_LEN == j) {
+ if (MAIN_PORT == port)
+ hw_priv->hw.mac_override = 1;
+ }
+}
+
+#define KS884X_DMA_MASK (~0x0UL)
+
+static void read_other_addr(struct ksz_hw *hw)
+{
+ int i;
+ u16 data[4];
+ struct ksz_switch *sw = hw->ksz_switch;
+
+ for (i = 0; i < 3; i++)
+ data[i] = eeprom_read(hw, i + EEPROM_DATA_OTHER_MAC_ADDR);
+ if ((data[0] || data[1] || data[2]) && data[0] != 0xff) {
+ sw->other_addr[5] = (u8) data[0];
+ sw->other_addr[4] = (u8)(data[0] >> 8);
+ sw->other_addr[3] = (u8) data[1];
+ sw->other_addr[2] = (u8)(data[1] >> 8);
+ sw->other_addr[1] = (u8) data[2];
+ sw->other_addr[0] = (u8)(data[2] >> 8);
+ }
+}
+
+#define PCI_VENDOR_ID_KS884X 0x16C6
+#define PCI_DEVICE_ID_KS8841 0x8841
+#define PCI_DEVICE_ID_KS8842 0x8842
+
+static int __init pcidev_init(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct net_device *dev;
+ struct dev_priv *priv;
+ struct dev_info *hw_priv;
+ struct ksz_hw *hw;
+ struct platform_info *info;
+ struct ksz_port *port;
+ unsigned long reg_base;
+ unsigned long reg_len;
+ int cnt;
+ int i;
+ int mib_port_count;
+ int pi;
+ int port_count;
+ int result;
+ char banner[80];
+ struct ksz_switch *sw = NULL;
+
+ result = pci_enable_device(pdev);
+ if (result)
+ return result;
+
+ result = -ENODEV;
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ return result;
+
+ reg_base = pci_resource_start(pdev, 0);
+ reg_len = pci_resource_len(pdev, 0);
+ if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0)
+ return result;
+
+ if (!request_mem_region(reg_base, reg_len, DRV_NAME))
+ return result;
+ pci_set_master(pdev);
+
+ result = -ENOMEM;
+
+ info = kmalloc(sizeof(struct platform_info), GFP_KERNEL);
+ if (!info)
+ goto pcidev_init_dev_err;
+ memset(info, 0, sizeof(struct platform_info));
+
+ hw_priv = &info->dev_info;
+ hw_priv->pdev = pdev;
+
+ hw = &hw_priv->hw;
+
+ hw->ioaddr = ioremap(reg_base, reg_len);
+ if (!hw->ioaddr)
+ goto pcidev_init_io_err;
+ hw->pdev = pdev;
+
+ cnt = hw_init(hw);
+ if (!cnt) {
+ if (msg_enable & NETIF_MSG_PROBE)
+ printk(KERN_ALERT "chip not detected\n");
+ result = -ENODEV;
+ goto pcidev_init_alloc_err;
+ }
+
+ sprintf(banner, "%s\n", version);
+ banner[13] = cnt + '0';
+ ks_info(hw_priv, "%s", banner);
+ ks_dbg(hw_priv, "Mem = %p; IRQ = %d\n", hw->ioaddr, pdev->irq);
+
+ /* Assume device is KSZ8841. */
+ hw->dev_count = 1;
+ port_count = 1;
+ mib_port_count = 1;
+ hw->addr_list_size = 0;
+ hw->mib_cnt = PORT_COUNTER_NUM;
+ hw->mib_port_cnt = 1;
+
+ /* KSZ8842 has a switch with multiple ports. */
+ if (2 == cnt) {
+#ifdef CONFIG_KSZ8842_STP
+ if (stp) {
+ fast_aging = 1;
+ multi_dev = 1;
+ hw->features |= STP_SUPPORT;
+ }
+#endif
+ if (fast_aging)
+ hw->overrides |= FAST_AGING;
+
+ hw->mib_cnt = TOTAL_PORT_COUNTER_NUM;
+
+ /* Multiple network device interfaces are required. */
+ if (multi_dev) {
+ hw->dev_count = SWITCH_PORT_NUM;
+ hw->addr_list_size = SWITCH_PORT_NUM - 1;
+ }
+
+ /* Single network device has multiple ports. */
+ if (1 == hw->dev_count) {
+ port_count = SWITCH_PORT_NUM;
+ mib_port_count = SWITCH_PORT_NUM;
+ }
+ hw->mib_port_cnt = TOTAL_PORT_NUM;
+ hw->ksz_switch = kmalloc(sizeof(struct ksz_switch), GFP_KERNEL);
+ if (!hw->ksz_switch)
+ goto pcidev_init_alloc_err;
+ memset(hw->ksz_switch, 0, sizeof(struct ksz_switch));
+
+ sw = hw->ksz_switch;
+ }
+ for (i = 0; i < hw->mib_port_cnt; i++)
+ hw->port_mib[i].mib_start = 0;
+
+ hw->parent = hw_priv;
+
+ /* Default MTU is 1500. */
+ hw_priv->mtu = (REGULAR_RX_BUF_SIZE + 3) & ~3;
+
+ if (ksz_alloc_mem(hw_priv))
+ goto pcidev_init_mem_err;
+
+ hw_priv->hw.id = net_device_present;
+
+ spin_lock_init(&hw_priv->hwlock);
+ mutex_init(&hw_priv->lock);
+
+ /* tasklet is enabled. */
+ tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+ (unsigned long) hw_priv);
+ tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+ (unsigned long) hw_priv);
+
+ /* tasklet_enable will decrement the atomic counter. */
+ tasklet_disable(&hw_priv->rx_tasklet);
+ tasklet_disable(&hw_priv->tx_tasklet);
+
+ for (i = 0; i < TOTAL_PORT_NUM; i++)
+ init_waitqueue_head(&hw_priv->counter[i].counter);
+
+ if (macaddr[0] != ':')
+ get_mac_addr(hw_priv, macaddr, MAIN_PORT);
+
+ /* Read MAC address and initialize override address if not overrided. */
+ hw_read_addr(hw);
+
+ /* Multiple device interfaces mode requires a second MAC address. */
+ if (hw->dev_count > 1) {
+ memcpy(sw->other_addr, hw->override_addr, MAC_ADDR_LEN);
+ read_other_addr(hw);
+ if (mac1addr[0] != ':')
+ get_mac_addr(hw_priv, mac1addr, OTHER_PORT);
+ }
+
+ hw_setup(hw);
+ if (hw->ksz_switch)
+ sw_setup(hw);
+ else {
+ hw_priv->wol_support = WOL_SUPPORT;
+ hw_priv->wol_enable = 0;
+ }
+
+ INIT_WORK(&hw_priv->mib_read, mib_read_work);
+
+ /* 500 ms timeout */
+ ksz_init_timer(&hw_priv->mib_timer_info, 500 * HZ / 1000,
+ mib_monitor, hw_priv);
+
+ for (i = 0; i < hw->dev_count; i++) {
+ dev = alloc_etherdev(sizeof(struct dev_priv));
+ if (!dev)
+ goto pcidev_init_reg_err;
+ info->netdev[i] = dev;
+
+ priv = netdev_priv(dev);
+ priv->adapter = hw_priv;
+ priv->id = net_device_present++;
+
+ port = &priv->port;
+ port->port_cnt = port_count;
+ port->mib_port_cnt = mib_port_count;
+ port->first_port = i;
+ port->flow_ctrl = PHY_FLOW_CTRL;
+
+ port->hw = hw;
+ port->linked = &hw->port_info[port->first_port];
+
+ for (cnt = 0, pi = i; cnt < port_count; cnt++, pi++) {
+ hw->port_info[pi].port_id = pi;
+ hw->port_info[pi].pdev = dev;
+ hw->port_info[pi].state = media_disconnected;
+ }
+
+ dev->mem_start = (unsigned long) hw->ioaddr;
+ dev->mem_end = dev->mem_start + reg_len - 1;
+ dev->irq = pdev->irq;
+ if (MAIN_PORT == i)
+ memcpy(dev->dev_addr, hw_priv->hw.override_addr,
+ MAC_ADDR_LEN);
+ else {
+ memcpy(dev->dev_addr, sw->other_addr,
+ MAC_ADDR_LEN);
+ if (!memcmp(sw->other_addr, hw->override_addr,
+ MAC_ADDR_LEN))
+ dev->dev_addr[5] += port->first_port;
+ }
+
+ dev->netdev_ops = &netdev_ops;
+ SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+ if (register_netdev(dev))
+ goto pcidev_init_reg_err;
+ port_set_power_saving(port, true);
+ }
+
+ pci_set_drvdata(pdev, info);
+ return 0;
+
+pcidev_init_reg_err:
+ for (i = 0; i < hw->dev_count; i++) {
+ if (info->netdev[i]) {
+ netdev_free(info->netdev[i]);
+ info->netdev[i] = NULL;
+ }
+ }
+
+pcidev_init_mem_err:
+ ksz_free_mem(hw_priv);
+ kfree(hw->ksz_switch);
+
+pcidev_init_alloc_err:
+ iounmap(hw->ioaddr);
+
+pcidev_init_io_err:
+ kfree(info);
+
+pcidev_init_dev_err:
+ release_mem_region(reg_base, reg_len);
+
+ return result;
+}
+
+static void pcidev_exit(struct pci_dev *pdev)
+{
+ int i;
+ struct platform_info *info = pci_get_drvdata(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ for (i = 0; i < info->dev_info.hw.dev_count; i++) {
+ if (info->netdev[i])
+ netdev_free(info->netdev[i]);
+ }
+ if (info->dev_info.hw.ioaddr)
+ iounmap(info->dev_info.hw.ioaddr);
+ ksz_free_mem(&info->dev_info);
+ kfree(info->dev_info.hw.ksz_switch);
+ kfree(info);
+}
+
+#ifdef CONFIG_PM
+static int pcidev_resume(struct pci_dev *pdev)
+{
+ int i;
+ struct platform_info *info = pci_get_drvdata(pdev);
+ struct dev_info *hw_priv = &info->dev_info;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ if (hw_priv->wol_enable)
+ hw_cfg_wol_pme(hw, 0);
+ for (i = 0; i < hw->dev_count; i++) {
+ if (info->netdev[i]) {
+ struct net_device *dev = info->netdev[i];
+
+ if (netif_running(dev)) {
+ netdev_open(dev);
+ netif_device_attach(dev);
+ }
+ }
+ }
+ return 0;
+}
+
+static int pcidev_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int i;
+ struct platform_info *info = pci_get_drvdata(pdev);
+ struct dev_info *hw_priv = &info->dev_info;
+ struct ksz_hw *hw = &hw_priv->hw;
+
+ /* Need to find a way to retrieve the device IP address. */
+ u8 net_addr[] = { 192, 168, 1, 1 };
+
+ for (i = 0; i < hw->dev_count; i++) {
+ if (info->netdev[i]) {
+ struct net_device *dev = info->netdev[i];
+
+ if (netif_running(dev)) {
+ netif_device_detach(dev);
+ netdev_close(dev);
+ }
+ }
+ }
+ if (hw_priv->wol_enable) {
+ hw_enable_wol(hw, hw_priv->wol_enable, net_addr);
+ hw_cfg_wol_pme(hw, 1);
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+#endif
+
+static char pcidev_name[] = "ksz884xp";
+
+static struct pci_device_id pcidev_table[] = {
+ { PCI_VENDOR_ID_KS884X, PCI_DEVICE_ID_KS8841,
+ 0x9020, 0x9720, 0, 0, 0 },
+ { PCI_VENDOR_ID_KS884X, PCI_DEVICE_ID_KS8841,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_KS884X, PCI_DEVICE_ID_KS8842,
+ 0x9020, 0x9720, 0, 0, 0 },
+ { PCI_VENDOR_ID_KS884X, PCI_DEVICE_ID_KS8842,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, pcidev_table);
+
+static struct pci_driver pci_device_driver = {
+#ifdef CONFIG_PM
+ .suspend = pcidev_suspend,
+ .resume = pcidev_resume,
+#endif
+ .name = pcidev_name,
+ .id_table = pcidev_table,
+ .probe = pcidev_init,
+ .remove = pcidev_exit
+};
+
+static int __init ksz884x_init_module(void)
+{
+ return pci_register_driver(&pci_device_driver);
+}
+
+static void __exit ksz884x_cleanup_module(void)
+{
+ pci_unregister_driver(&pci_device_driver);
+}
+
+module_init(ksz884x_init_module);
+module_exit(ksz884x_cleanup_module);
+
+MODULE_DESCRIPTION("KSZ8841/2 PCI network driver");
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@...rel.com>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+
+module_param(macaddr, charp, 0);
+module_param(mac1addr, charp, 0);
+module_param(fast_aging, int, 0);
+module_param(multi_dev, int, 0);
+module_param(stp, int, 0);
+MODULE_PARM_DESC(macaddr, "MAC address");
+MODULE_PARM_DESC(mac1addr, "Second MAC address");
+MODULE_PARM_DESC(fast_aging, "Fast aging");
+MODULE_PARM_DESC(multi_dev, "Multiple device interfaces");
+MODULE_PARM_DESC(stp, "STP support");
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists