| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <4B533A46.9050600@majjas.com> Date: Sun, 17 Jan 2010 11:26:46 -0500 From: Michael Breuer <mbreuer@...jas.com> To: Jarek Poplawski <jarkao2@...il.com> Cc: Stephen Hemminger <shemminger@...ux-foundation.org>, David Miller <davem@...emloft.net>, akpm@...ux-foundation.org, flyboy@...il.com, linux-kernel@...r.kernel.org, netdev@...r.kernel.org Subject: Re: [PATCH] af_packet: Don't use skb after dev_queue_xmit() On 01/13/2010 04:16 PM, Michael Breuer wrote: > On 1/13/2010 4:09 PM, Jarek Poplawski wrote: >> On Wed, Jan 13, 2010 at 03:39:37PM -0500, Michael Breuer wrote: >>> Just an FYI - 2.6.32.3 with alt 3 af_packet patch& sky2 >>> pskb_may_pull runs OK with DMAR (re)enabled and msi enabled. >> Hmm... What a pity! It was such a useful debugging tool for >> networking ;-) BTW, I'm not sure if "runs OK" means with or without >> those DHCP drops& large packets you described. >> >> Thanks, >> Jarek P. > As of now, no errors even when blasting traffic & forcing dhcp packets > as before. I haven't tried putting mtu back to 9k yet. OK means that > there are no obvious differences in behavior with or without DMAR all > else being equal. > > There were some updates made to stable that could have fixed this - > I'd guess intel_iommu fixes helped. > > If it helps, I'm still getting one error without DMAR enabled - at > startup, there's a DMA sync oops - mismatch of 72 bytes coming from > sky2. That oops was posted previously - with DMAR (re) enabled, > there's no related oops. Update: after leaving the system up for a few days, I hit the DMAR error again. This happened during a scheduled backup from my win7 box. A reboot was required to re-enable eth0. After the error, eth0 was receiving, but was unable to transmit. For example, the log reported arp bogons; DHCPINFORM/ACK sequences (where the ACK that was logged was not transmitted), etc. The log was filled with sky2 eth0: tx timeout messages; as well as disable/enable of eth0. I attempted to get things up again without a reboot, but failed. Even rmmod & insmod did not fix whatever was broken on the TX side. Note that this is similar to the earlier sky2 errors I had under load with the variety of patches, and with or without DMAR enabled. Just took way longer this time. Note that eth1 remained functional. Unfortunately, with the latest set of patches installed, this is no longer reproducible at will. I'd guess therefore that the patches narrowed some hole, but didn't close it. Relevant log portions: Jan 17 05:29:49 mail dhcpd: DHCPREQUEST for 10.0.0.32 from 00:26:bb:aa:15:10 (mbitouch) via eth0 Jan 17 05:29:49 mail dhcpd: DHCPACK on 10.0.0.32 to 00:26:bb:aa:15:10 (mbitouch) via eth0 Jan 17 05:36:49 mail kernel: DRHD: handling fault status reg 2 Jan 17 05:36:49 mail kernel: DMAR:[DMA Read] Request device [06:00.0] fault addr ffe7957fe000 Jan 17 05:36:49 mail kernel: DMAR:[fault reason 06] PTE Read access is not set Jan 17 05:36:49 mail kernel: sky2 0000:06:00.0: error interrupt status=0xc0000000 Jan 17 05:36:49 mail kernel: sky2 0000:06:00.0: PCI hardware error (0x2010) Jan 17 05:36:49 mail smbd[14840]: [2010/01/17 05:36:49, 0] lib/util_sock.c:539(read_fd_with_timeout) Jan 17 05:36:49 mail smbd[14840]: [2010/01/17 05:36:49, 0] lib/util_sock.c:1491(get_peer_addr_internal) Jan 17 05:36:49 mail smbd[14840]: getpeername failed. Error was Transport endpoint is not connected Jan 17 05:36:49 mail smbd[14840]: read_fd_with_timeout: client 0.0.0.0 read error = Connection timed out. Jan 17 05:37:51 mail kernel: ------------[ cut here ]------------ Jan 17 05:37:51 mail kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0xf3/0x164() Jan 17 05:37:51 mail kernel: Hardware name: System Product Name Jan 17 05:37:51 mail kernel: NETDEV WATCHDOG: eth0 (sky2): transmit queue 0 timed out Jan 17 05:37:51 mail kernel: Modules linked in: nls_utf8 cifs cpufreq_stats ip6table_mangle ip6table_filter ip6_tables iptable_raw iptable_mangle ipt_MASQUERADE iptable_nat nf_nat appletalk psnap llc nfsd lockd nfs_acl auth_rpcgss exportfs hwmon_vid coretemp sunrpc acpi_cpufreq sit tunnel4 ipt_LOG nf_conntrack_netbios_ns nf_conntrack_ftp nf_conntrack_ipv6 xt_multiport xt_DSCP xt_dscp xt_MARK ipv6 dm_multipath kvm_intel kvm snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_ens1371 gameport snd_rawmidi snd_ac97_codec snd_hwdep ac97_bus firewire_ohci snd_seq firewire_core snd_seq_device gspca_spca505 gspca_main videodev i2c_i801 snd_pcm crc_itu_t v4l1_compat pcspkr v4l2_compat_ioctl32 asus_atk0110 hwmon iTCO_wdt iTCO_vendor_support snd_timer snd soundcore sky2 snd_page_alloc wmi fbcon tileblit font bitblit softcursor raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 ata_generic pata_acpi pata_marvell nouveau ttm drm_kms_helper drm agpgart fb i2c_algo_bit cfbcopyarea i2c_core Jan 17 05:37:51 mail kernel: cfbimgblt cfbfillrect [last unloaded: microcode] Jan 17 05:37:51 mail kernel: Pid: 0, comm: swapper Tainted: G W 2.6.32WITHMMAPNODMARAF3SKY2TXRGCLNV4TX-00893-gb5d5baa-dirty #2 Jan 17 05:37:51 mail kernel: Call Trace: Jan 17 05:37:51 mail kernel: <IRQ> [<ffffffff8105365a>] warn_slowpath_common+0x7c/0x94 Jan 17 05:37:51 mail kernel: [<ffffffff810536c9>] warn_slowpath_fmt+0x41/0x43 Jan 17 05:37:51 mail kernel: [<ffffffff813e2e57>] ? netif_tx_lock+0x44/0x6c Jan 17 05:37:51 mail kernel: [<ffffffff813e2fbf>] dev_watchdog+0xf3/0x164 Jan 17 05:37:51 mail kernel: [<ffffffff8106e8a4>] ? __queue_work+0x3a/0x42 Jan 17 05:37:51 mail kernel: [<ffffffff8106316b>] run_timer_softirq+0x1c8/0x270 Jan 17 05:37:51 mail kernel: [<ffffffff8105ae3b>] __do_softirq+0xf8/0x1cd Jan 17 05:37:51 mail kernel: [<ffffffff8107ef33>] ? tick_program_event+0x2a/0x2c Jan 17 05:37:51 mail kernel: [<ffffffff81012e1c>] call_softirq+0x1c/0x30 Jan 17 05:37:51 mail kernel: [<ffffffff810143a3>] do_softirq+0x4b/0xa6 Jan 17 05:37:51 mail kernel: [<ffffffff8105aa1b>] irq_exit+0x4a/0x8c Jan 17 05:37:51 mail kernel: [<ffffffff8146f8f2>] smp_apic_timer_interrupt+0x86/0x94 Jan 17 05:37:51 mail kernel: [<ffffffff810127e3>] apic_timer_interrupt+0x13/0x20 Jan 17 05:37:51 mail kernel: <EOI> [<ffffffff812c678a>] ? acpi_idle_enter_bm+0x256/0x28a Jan 17 05:37:51 mail kernel: [<ffffffff812c6783>] ? acpi_idle_enter_bm+0x24f/0x28a Jan 17 05:37:51 mail kernel: [<ffffffff813a5f50>] ? cpuidle_idle_call+0x9e/0xfa Jan 17 05:37:51 mail kernel: [<ffffffff81010c90>] ? cpu_idle+0xb4/0xf6 Jan 17 05:37:51 mail kernel: [<ffffffff81464ed2>] ? start_secondary+0x201/0x242 Jan 17 05:37:51 mail kernel: ---[ end trace 57f7151f6a5def07 ]--- Jan 17 05:37:51 mail kernel: sky2 eth0: tx timeout Jan 17 05:37:51 mail kernel: sky2 eth0: transmit ring 85 .. 45 report=85 done=85 Jan 17 05:37:51 mail kernel: sky2 eth0: disabling interface Jan 17 05:37:51 mail kernel: sky2 eth0: enabling interface <unrelated stuff> Jan 17 05:39:14 mail kernel: sky2 eth0: tx timeout Jan 17 05:39:14 mail kernel: sky2 eth0: transmit ring 2 .. 89 report=2 done=2 Jan 17 05:39:14 mail kernel: sky2 eth0: disabling interface Jan 17 05:39:14 mail kernel: sky2 eth0: enabling interface <time passes> Jan 17 05:40:22 mail kernel: sky2 eth0: tx timeout Jan 17 05:40:22 mail kernel: sky2 eth0: transmit ring 2 .. 89 report=2 done=2 Jan 17 05:40:22 mail kernel: sky2 eth0: disabling interface Jan 17 05:40:22 mail kernel: sky2 eth0: enabling interface Jan 17 05:40:22 mail NetworkManager: <info> (eth0): carrier now OFF (device state 1) Jan 17 05:40:25 mail kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both <time passes> Jan 17 05:42:05 mail kernel: sky2 eth0: tx timeout Jan 17 05:42:05 mail kernel: sky2 eth0: transmit ring 2 .. 89 report=2 done=2 Jan 17 05:42:05 mail kernel: sky2 eth0: disabling interface Jan 17 05:42:05 mail kernel: sky2 eth0: enabling interface Jan 17 05:42:08 mail kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both <time passes> Jan 17 05:44:13 mail kernel: sky2 eth0: tx timeout Jan 17 05:44:13 mail kernel: sky2 eth0: transmit ring 3 .. 90 report=3 done=3 Jan 17 05:44:13 mail kernel: sky2 eth0: disabling interface Jan 17 05:44:13 mail kernel: sky2 eth0: enabling interface Jan 17 05:44:16 mail kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both <much of the same until I rebooted> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists