| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1263928205-31788-1-git-send-email-allan.stephens@windriver.com> Date: Tue, 19 Jan 2010 14:10:05 -0500 From: Allan Stephens <allan.stephens@...driver.com> To: David Miller <davem@...emloft.net> Cc: netdev@...r.kernel.org, allan.stephens@...driver.com Subject: [PATCH net-next-2.6] tipc: Clean up configuration file This patch addresses a number of minor (mostly cosmetic) issues relating to the configuration of TIPC, including the following: - Corrects range limits for maximum number of ports per node - Adds missing range limits for size of log buffer - Removes configuration setting relating to unsupported slave node capability - Standardizes description and help text wording for configuration settings - Removes unneeded blank spaces Signed-off-by: Allan Stephens <allan.stephens@...driver.com> --- net/tipc/Kconfig | 73 ++++++++++++++++++++---------------------------------- 1 files changed, 27 insertions(+), 46 deletions(-) diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig index dafbd53..b74f78d 100644 --- a/net/tipc/Kconfig +++ b/net/tipc/Kconfig @@ -10,7 +10,7 @@ menuconfig TIPC specially designed for intra cluster communication. This protocol originates from Ericsson where it has been used in carrier grade cluster applications for many years. - + For more information about TIPC, see http://tipc.sourceforge.net. This protocol support is also available as a module ( = code which @@ -23,24 +23,23 @@ menuconfig TIPC if TIPC config TIPC_ADVANCED - bool "TIPC: Advanced configuration" + bool "Advanced TIPC configuration" default n help - Saying Y here will open some advanced configuration - for TIPC. Most users do not need to bother, so if - unsure, just say N. + Saying Y here will open some advanced configuration for TIPC. + Most users do not need to bother; if unsure, just say N. config TIPC_ZONES - int "Maximum number of zones in network" + int "Maximum number of zones in a network" depends on TIPC_ADVANCED range 1 255 default "3" help - Max number of zones inside TIPC network. Max supported value - is 255 zones, minimum is 1 + Specifies how many zones can be supported in a TIPC network. + Can range from 1 to 255 zones; default is 3. - Default is 3 zones in a network; setting this to higher - allows more zones but might use more memory. + Setting this to a smaller value saves some memory; + setting it to a higher value allows for more zones. config TIPC_CLUSTERS int "Maximum number of clusters in a zone" @@ -48,70 +47,52 @@ config TIPC_CLUSTERS range 1 1 default "1" help - ***Only 1 (one cluster in a zone) is supported by current code.*** - - (Max number of clusters inside TIPC zone. Max supported - value is 4095 clusters, minimum is 1. + Specifies how many clusters can be supported in a TIPC zone. - Default is 1; setting this to smaller value might save - some memory, setting it to higher - allows more clusters and might consume more memory.) + *** Currently TIPC only supports a single cluster per zone. *** config TIPC_NODES - int "Maximum number of nodes in cluster" + int "Maximum number of nodes in a cluster" depends on TIPC_ADVANCED range 8 2047 default "255" help - Maximum number of nodes inside a TIPC cluster. Maximum - supported value is 2047 nodes, minimum is 8. - - Setting this to a smaller value saves some memory, - setting it to higher allows more nodes. - -config TIPC_SLAVE_NODES - int "Maximum number of slave nodes in cluster" - depends on TIPC_ADVANCED - range 0 2047 - default "0" - help - ***This capability is not supported by current code.*** - - Maximum number of slave nodes inside a TIPC cluster. Maximum - supported value is 2047 nodes, minimum is 0. + Specifies how many nodes can be supported in a TIPC cluster. + Can range from 8 to 2047 nodes; default is 255. - Setting this to a smaller value saves some memory, - setting it to higher allows more nodes. + Setting this to a smaller value saves some memory; + setting it to higher allows for more nodes. config TIPC_PORTS int "Maximum number of ports in a node" depends on TIPC_ADVANCED - range 217 65536 + range 127 65535 default "8191" help - Maximum number of ports within a node. Maximum - supported value is 64535 nodes, minimum is 127. + Specifies how many ports can be supported by a node. + Can range from 127 to 65535 ports; default is 8191. Setting this to a smaller value saves some memory, - setting it to higher allows more ports. + setting it to higher allows for more ports. config TIPC_LOG int "Size of log buffer" depends on TIPC_ADVANCED - default 0 + range 0 32768 + default "0" help - Size (in bytes) of TIPC's internal log buffer, which records the - occurrence of significant events. Maximum supported value - is 32768 bytes, minimum is 0. + Size (in bytes) of TIPC's internal log buffer, which records the + occurrence of significant events. Can range from 0 to 32768 bytes; + default is 0. There is no need to enable the log buffer unless the node will be managed remotely via TIPC. config TIPC_DEBUG - bool "Enable debugging support" + bool "Enable debug messages" default n help - This will enable debugging of TIPC. + This enables debugging of TIPC. Only say Y here if you are having trouble with TIPC. It will enable the display of detailed information about what is going on. -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists