| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4B5661C0.9050309@cn.fujitsu.com> Date: Wed, 20 Jan 2010 09:52:00 +0800 From: Yang Hongyang <yanghy@...fujitsu.com> To: Koki Sanagi <sanagi.koki@...fujitsu.com> CC: netdev@...r.kernel.org, davem@...emloft.net, nhorman@...driver.com, izumi.taku@...fujitsu.com, kaneshige.kenji@...fujitsu.com Subject: Re: [PATCH 0/5] tracing/events: add tracepoint to TCP/IP stack and netdev layer Koki Sanagi wrote: > Thanks for your reply. > > (2010/01/19 16:15), Yang Hongyang wrote: >> Koki Sanagi wrote: >>> These patch-set adds some tracepoints to the TCP/IP stack and netdev layer. >> Your patch-set is mainly for IPv4,I think you'd better mantion that in your >> title.^!^ >> > Yeah, you're right. > I'll change the title next time. Next time, all your mails that you send out to the maillist should using UTF-8 encoding. > > Best regards, > Koki Sanagi > >>> As described below, >>> http://marc.info/?l=linux-netdev&m=126096487212459&w=2 >>> dev_hard_start_xmit and netif_receive_skb are important location to add >>> tracepoints. Because driver depends on an machine environment, we usually >>> check this point when solving network problem. But these two points are lack of >>> infrotmation that what packets are passed, So I add other tracepoints to know >>> what packets are passed and to give some merits. >>> >>> Added tracepoints are at transmit/receive entry of TCP, UDP, RAW, IPv4, driver >>> and Qdisc. And tracepoints to output information to make connection >>> between these entry tracepoints are also added. >>> >>> These tracepoints give some merits. >>> For example, they enable us to measure packet latency. >>> By using tcpdump, we can analyze what packets are passed, but we cannot analyze >>> how long it takes to pass through network layer(In other words, latency of TCP >>> layer, IP layer and Qdisc). >>> Packet latency is very useful information to solve a network bad performance or >>> bad reaction network application, packet latency is very useful information. >>> >>> As an other use case, unlike a tcpdump, they are recorded in ftrace buffer >>> without IO burden. Only when you need, output recorded information. >>> I mean, they are fit to run always. >>> >>> Details of added tracepoint are below. >>> >>> skb_clone chase the cloned skb >>> senddata_copy_skb copy userdata to skb for transmit >>> >>> netdev_start_xmit entry of driver's transmit function. >>> netdev_receive_skb entry of netstack(receive). >>> dev_queue_xmit entry of Qdisc. >>> >>> ip_queue_xmit entry of IP layer(TCP transmit) >>> ip_push_pending_frames entry of IP layer(UDP transmit) >>> ip_output entry of IP layer(RAW transmit) >>> ip_frag_queue aggregate fragmented packet >>> ip_frag_reasm reasemble fragmented packet >>> ip_rcv entry of IP layer(receive) >>> >>> tcp_sendmsg entry of TCP layer(transmit) >>> tcp_sendpage entry of TCP layer(transmit) >>> tcp_push_pending_frames all data(tcp_sendmsg have) have copied to skb >>> tcp_v4_rcv entry of TCP layer(receive) >>> >>> udp_sendmsg entry of UDP layer(transmit) >>> udp_sendpage entry of UDP layer(transmit) >>> udp_push_pending_frames all data(udp_sendmsg have) have copied to skb >>> udp_rcv entry of UDP layer(receive). >>> >>> raw_sendmsg entry of RAW layer(transmit). >>> raw_rcv entry of RAW layer(receive). >>> >>> Outputs are below. >>> >>> TCP send >>> netperf-2513 [000] 2603.586818: tcp_sendmsg: sk=f644eac0 len=5000 >>> netperf-2513 [000] 2603.586818: senddata_copy_skb: sk=f644eac0 skbaddr=f7159800 len=1416 >>> netperf-2513 [000] 2603.586820: senddata_copy_skb: sk=f644eac0 skbaddr=f7159500 len=1448 >>> netperf-2513 [000] 2603.586821: senddata_copy_skb: sk=f644eac0 skbaddr=f7158d80 len=1448 >>> netperf-2513 [000] 2603.586822: senddata_copy_skb: sk=f644eac0 skbaddr=f7159c80 len=688 >>> netperf-2513 [000] 2603.586822: tcp_push_pending_frames: sk=f644eac0 sport=54875 dport=51707 >>> tail-2514 [001] 2603.587577: skb_clone: original=f7159800 clone=f71598b4 >>> tail-2514 [001] 2603.587578: ip_queue_xmit: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587579: ip_output: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587579: dev_queue_xmit: dev=eth10 skbaddr=f71598b4 len=1514 >>> tail-2514 [001] 2603.587580: netdev_start_xmit: dev=eth10 skbaddr=f71598b4 len=1514 >>> tail-2514 [001] 2603.587628: skb_clone: original=f7159500 clone=f71595b4 >>> tail-2514 [001] 2603.587629: ip_queue_xmit: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587630: ip_output: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587631: dev_queue_xmit: dev=eth10 skbaddr=f71595b4 len=1514 >>> tail-2514 [001] 2603.587632: netdev_start_xmit: dev=eth10 skbaddr=f71595b4 len=1514 >>> tail-2514 [001] 2603.587632: skb_clone: original=f7158d80 clone=f7158e34 >>> tail-2514 [001] 2603.587633: ip_queue_xmit: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587634: ip_output: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587635: dev_queue_xmit: dev=eth10 skbaddr=f7158e34 len=1514 >>> tail-2514 [001] 2603.587635: netdev_start_xmit: dev=eth10 skbaddr=f7158e34 len=1514 >>> tail-2514 [001] 2603.587685: skb_clone: original=f7159c80 clone=f7159d34 >>> tail-2514 [001] 2603.587685: ip_queue_xmit: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587687: ip_output: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2 >>> tail-2514 [001] 2603.587687: dev_queue_xmit: dev=eth10 skbaddr=f7159d34 len=1514 >>> tail-2514 [001] 2603.587688: netdev_start_xmit: dev=eth10 skbaddr=f7159d34 len=1514 >>> >>> TCP recv >>> <idle>-0 [001] 3499.386601: netdev_receive_skb: dev=eth10 skbaddr=f4a88480 len=1500 >>> <idle>-0 [001] 3499.386602: ip_rcv: skbaddr=f4a88480 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [001] 3499.386604: tcp_v4_rcv: skbaddr=f4a88480 sport=51035 dport=34474 >>> <idle>-0 [000] 3499.386619: netdev_receive_skb: dev=eth10 skbaddr=f3c75300 len=1500 >>> <idle>-0 [000] 3499.386619: ip_rcv: skbaddr=f3c75300 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [000] 3499.386622: tcp_v4_rcv: skbaddr=f3c75300 sport=51035 dport=34474 >>> netserver-2519 [000] 3499.386626: skb_copy_datagram_iovec: skbaddr=f4a88480 len=1448 >>> netserver-2519 [000] 3499.386628: skb_copy_datagram_iovec: skbaddr=f3c75300 len=1448 >>> >>> UDP send >>> netperf-2506 [001] 2309.073460: udp_sendmsg: sk=f662e6c0 len=5000 >>> netperf-2506 [001] 2309.073466: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65780 len=1472 >>> netperf-2506 [001] 2309.073467: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65000 len=1480 >>> netperf-2506 [001] 2309.073468: senddata_copy_skb: sk=f662e6c0 skbaddr=f3decf00 len=1480 >>> netperf-2506 [001] 2309.073469: senddata_copy_skb: sk=f662e6c0 skbaddr=f4802840 len=568 >>> netperf-2506 [001] 2309.073470: udp_push_pending_frames: sk=f662e6c0 sport=42679 dport=47640 >>> netperf-2506 [001] 2309.073470: ip_push_pending_frames: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2 >>> netperf-2506 [001] 2309.073471: ip_output: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2 >>> netperf-2506 [001] 2309.073472: dev_queue_xmit: dev=eth10 skbaddr=f5f65780 len=1514 >>> netperf-2506 [001] 2309.073473: dev_queue_xmit: dev=eth10 skbaddr=f5f65000 len=1514 >>> netperf-2506 [001] 2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f3decf00 len=1514 >>> netperf-2506 [001] 2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f4802840 len=602 >>> <idle>-0 [001] 2309.073615: netdev_start_xmit: dev=eth10 skbaddr=f5f65780 len=1514 >>> <idle>-0 [001] 2309.073616: netdev_start_xmit: dev=eth10 skbaddr=f5f65000 len=1514 >>> <idle>-0 [000] 2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f3decf00 len=1514 >>> <idle>-0 [000] 2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f4802840 len=602 >>> >>> UDP recv >>> <idle>-0 [001] 3671.663678: netdev_receive_skb: dev=eth10 skbaddr=f5f72d80 len=1500 >>> <idle>-0 [001] 3671.663678: ip_rcv: skbaddr=f5f72d80 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [001] 3671.663680: ip_frag_queue: skbaddr=f5f72d80 prev=(null) >>> <idle>-0 [001] 3671.663681: netdev_receive_skb: dev=eth10 skbaddr=f5f6aa80 len=1500 >>> <idle>-0 [001] 3671.663681: ip_rcv: skbaddr=f5f6aa80 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [001] 3671.663681: ip_frag_queue: skbaddr=f5f6aa80 prev=f5f72d80 >>> <idle>-0 [000] 3671.663702: netdev_receive_skb: dev=eth10 skbaddr=f4800840 len=1500 >>> <idle>-0 [000] 3671.663703: ip_rcv: skbaddr=f4800840 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [000] 3671.663703: ip_frag_queue: skbaddr=f4800840 prev=f5f6aa80 >>> <idle>-0 [000] 3671.663704: netdev_receive_skb: dev=eth10 skbaddr=f4a88b40 len=588 >>> <idle>-0 [000] 3671.663705: ip_rcv: skbaddr=f4a88b40 saddr=192.168.100.2 daddr=192.168.100.5 >>> <idle>-0 [000] 3671.663705: ip_frag_queue: skbaddr=f4a88b40 prev=f4800840 >>> <idle>-0 [000] 3671.663706: skb_clone: original=f4a88b40 clone=f5fff480 >>> <idle>-0 [000] 3671.663707: kfree_skb: skbaddr=f5f72d80 protocol=2048 location=c0715f1a >>> <idle>-0 [000] 3671.663707: ip_frag_reasm: head=f4a88b40 len=1480 >>> <idle>-0 [000] 3671.663711: udp_rcv: skbaddr=f4a88b40 sport=57915 dport=37634 >>> netserver-2525 [000] 3671.663718: skb_copy_datagram_iovec: skbaddr=f4a88b40 len=5000 >>> netserver-2525 [000] 3671.663718: skb_copy_datagram_iovec: skbaddr=f5f6aa80 len=1480 >>> netserver-2525 [000] 3671.663719: skb_copy_datagram_iovec: skbaddr=f4800840 len=1480 >>> netserver-2525 [000] 3671.663719: skb_copy_datagram_iovec: skbaddr=f5fff480 len=568 >>> >>> RAW send >>> send-2431 [001] 1813.799957: raw_sendmsg: sk=f4a37200 len=1500 >>> send-2431 [001] 1813.799959: senddata_copy_skb: sk=f4a37200 skbaddr=f3dec180 len=1500 >>> send-2431 [001] 1813.799960: ip_output: skbaddr=f3dec180 saddr=192.168.100.5 daddr=192.168.100.2 >>> send-2431 [001] 1813.799960: dev_queue_xmit: dev=eth10 skbaddr=f3dec180 len=1514 >>> send-2431 [001] 1813.799961: netdev_start_xmit: dev=eth10 skbaddr=f3dec180 len=1514 >>> >>> RAW recv >>> <idle>-0 [000] 2052.858947: netdev_receive_skb: dev=eth1 skbaddr=f5f66000 len=1500 >>> <idle>-0 [000] 2052.858947: ip_rcv: skbaddr=f5f66000 saddr=192.168.101.2 daddr=192.168.101.5 >>> <idle>-0 [000] 2052.858951: skb_clone: original=f5f66000 clone=f3e43cc0 >>> <idle>-0 [000] 2052.858952: raw_rcv: skbaddr=f3e43cc0 len=1476 >>> recv-2499 [001] 2052.858970: skb_copy_datagram_iovec: skbaddr=f3e43cc0 len=1500 >>> >>> Best Regards, >>> Koki Sanagi<sanagi.koki@...fujitsu.com> >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe netdev" in >>> the body of a message to majordomo@...r.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> >> > > > > -- Regards Yang Hongyang -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists