netdev - Re: [PATCH] sky2: Fix WARNING: at lib/dma-debug.c:902 check

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <4B58BD3A.1000705@majjas.com>
Date:	Thu, 21 Jan 2010 15:46:50 -0500
From:	Michael Breuer <mbreuer@...jas.com>
To:	Jarek Poplawski <jarkao2@...il.com>
Cc:	David Miller <davem@...emloft.net>,
	Stephen Hemminger <shemminger@...ux-foundation.org>,
	akpm@...ux-foundation.org, flyboy@...il.com,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Michael Chan <mchan@...adcom.com>,
	Don Fry <pcnet32@...izon.net>,
	Francois Romieu <romieu@...zoreil.com>,
	Matt Carlson <mcarlson@...adcom.com>
Subject: Re: [PATCH] sky2: Fix WARNING: at lib/dma-debug.c:902 check_sync

On 1/21/2010 3:41 PM, Jarek Poplawski wrote:
> On Thu, Jan 21, 2010 at 02:59:19PM -0500, Michael Breuer wrote:
>    
>> On 1/20/2010 4:41 AM, Jarek Poplawski wrote:
>>      
>>> [ previously: Re: [PATCH] af_packet: Don't use skb after dev_queue_xmit() ]
>>> diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
>>> index 7650f73..cdebdd3 100644
>>> --- a/drivers/net/sky2.c
>>> +++ b/drivers/net/sky2.c
>>> @@ -2252,12 +2252,14 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2,
>>>   	skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
>>>   	if (likely(skb)) {
>>>   		pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
>>> -					    length, PCI_DMA_FROMDEVICE);
>>> +					    pci_unmap_len(re, data_size),
>>> +					    PCI_DMA_FROMDEVICE);
>>>   		skb_copy_from_linear_data(re->skb, skb->data, length);
>>>   		skb->ip_summed = re->skb->ip_summed;
>>>   		skb->csum = re->skb->csum;
>>>   		pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
>>> -					       length, PCI_DMA_FROMDEVICE);
>>> +					       pci_unmap_len(re, data_size),
>>> +					       PCI_DMA_FROMDEVICE);
>>>   		re->skb->ip_summed = CHECKSUM_NONE;
>>>   		skb_put(skb, length);
>>>   	}
>>>        
>> Just a testing update: I went back to CONFIG_DMAR=Y yesterday and
>> have not (yet) encountered the sky2 crash I'd been having prior to
>> this fix. I've been pumping traffic through, and based on pre-patch
>> experience, it would likely have crashed by now.
>>
>> Will keep the system up for the next couple of days w/o reboot to
>> confirm that the sky2 lockup I'd been seeing has stopped happening
>> with this patch.
>>
>> Test notes:
>>
>> 1) Warning previously apparent on start (dma_debug check_sync) with
>> CONFIG_DMAR=n is gone.
>> 2) W/o the above patch, I was getting sky2 DMAR errors and
>> subsequent TX hangs requiring reboot to clear. The hangs happened
>> after at least 12 hours of uptime, and under RX load at the time of
>> the hang.
>> 3) With the above patch (and no other changes) I have not been able
>> to recreate the crash - the system is stable.
>>      
> Btw, could you remind us if during last dmar bugs jumbo frames might
> have been used or maybe mtu was changed, and the current test setting?
>
>    
I've hit this with and without Jumbo frames enabled. Last couple of 
recreations were with mtu = 1500, which is how I'm running now.
>> I have been following the discussion about the DMA api would suggest
>> that the length issue when DMAR is enabled is less innocuous than
>> previously believed.
>>      
> Actually, the last conclusions are - it's more innocuous than ever
> believed, and I completely agree with this (at least until the next
> week ;-).
>    
I stand grammatically corrected.
> Thanks,
> Jarek P.
>    

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html